Dataset.

Material, geometrical and imperfection characteristics of structural stainless steels and members [Dataset]

UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/330855
UPCommons. Portal del coneixement obert de la UPC
  • Arrayago Luquin, Itsaso|||0000-0002-0054-9322
  • Rasmussen, Kim J.R.
  • Real Saladrigas, Esther|||0000-0003-1723-3380
This file includes data used in the calibration of statistical models for the different random variables affecting stainless steel members. This data was used in the analysis carried out and reported in the publication: Arrayago I., Rasmussen K.J.R., Real E. Statistical analysis of the material, geometrical and imperfection characteristics of structural stainless steels and members Journal of Constructional Steel Research 175, 106378, 2020. DOI: https://doi.org/10.1016/j.jcsr.2020.106378 Measured and nominal values are listed for geometry-related data. Measured values are listed for material, imperfection and residual stress data.
 

DOI: http://hdl.handle.net/2117/330855, https://dx.doi.org/10.5821/data-2117-330855-1
UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/330855

HANDLE: http://hdl.handle.net/2117/330855, https://dx.doi.org/10.5821/data-2117-330855-1
UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/330855
 
Ver en: http://hdl.handle.net/2117/330855, https://dx.doi.org/10.5821/data-2117-330855-1
UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/330855

UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/331159
Artículo científico (article). 2020

STATISTICAL ANALYSIS OF THE MATERIAL, GEOMETRICAL AND IMPERFECTION CHARACTERISTICS OF STRUCTURAL STAINLESS STEELS AND MEMBERS

UPCommons. Portal del coneixement obert de la UPC
  • Arrayago Luquin, Itsaso|||0000-0002-0054-9322
  • Rasmussen, Kim J.R.
  • Real Saladrigas, Esther|||0000-0003-1723-3380
Traditional member-based two-step design approaches included in current structural codes for steel structures, as well as more recent system-based direct-design alternatives, require building rigorous structural reliability frameworks for the calibration of partial coefficients (resistance factors) to achieve specified target reliability requirements. Key design parameters affecting the strength of structures and their random variations are generally modelled by nominal or characteristic values in design standards, which are combined with partial coefficients that need to be calibrated from measurements on real samples. While the statistical characterization of material and geometric properties of structural steels has been consolidated over the last decades, information about the characterization of structural stainless steels is virtually non-existent due to the limited pool of available data. Thus, this paper presents the basic ingredient for developing reliability frameworks for stainless steel structures and components by statistically characterizing the main random parameters affecting their strength through a comprehensive database collected from the literature. Based on the collected data, appropriate probabilistic models are proposed for geometric properties, material properties, imperfections and residual stresses of different stainless steel alloys and cross-section or product types. The data is equally applicable to member-based reliability analyses as described in existing codes and system-based analyses targeted at the direct-design of stainless steel structures by advanced analysis., This research project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No. 842395. The time dedicated by numerous authors of referenced papers to provide additional data and information is also much appreciated., Peer Reviewed





UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/330855
Dataset. 2020

MATERIAL, GEOMETRICAL AND IMPERFECTION CHARACTERISTICS OF STRUCTURAL STAINLESS STEELS AND MEMBERS [DATASET]

UPCommons. Portal del coneixement obert de la UPC
  • Arrayago Luquin, Itsaso|||0000-0002-0054-9322
  • Rasmussen, Kim J.R.
  • Real Saladrigas, Esther|||0000-0003-1723-3380
This file includes data used in the calibration of statistical models for the different random variables affecting stainless steel members. This data was used in the analysis carried out and reported in the publication: Arrayago I., Rasmussen K.J.R., Real E. Statistical analysis of the material, geometrical and imperfection characteristics of structural stainless steels and members Journal of Constructional Steel Research 175, 106378, 2020. DOI: https://doi.org/10.1016/j.jcsr.2020.106378 Measured and nominal values are listed for geometry-related data. Measured values are listed for material, imperfection and residual stress data.





3484