BUSCADOR RECOLECTA

Medalla otorgada a Justo Nieto por la Universidad del Valle

Premio a Justo Nieto

Homenaje a los tiradores de la Cordà de Paterna con una escultura de Miguel Monleón.

Premio a Justo Nieto por la Universidad Nacional de San Martin

Medalla "Ad orbem per technicam" (Hacia el mundo a través de la técnica) otorgada a Justo Nieto por la Universidad de las Palmas de Gran Canaria.

Medalla conmemorativa a Justo Nieto de la Universidad Nacional de San Martin - Tarapoto

This file includes data used in the calibration of statistical models for the different random variables affecting stainless steel members. This data was used in the analysis carried out and reported in the publication: Arrayago I., Rasmussen K.J.R., Real E. Statistical analysis of the material, geometrical and imperfection characteristics of structural stainless steels and members Journal of Constructional Steel Research 175, 106378, 2020. DOI: https://doi.org/10.1016/j.jcsr.2020.106378 Measured and nominal values are listed for geometry-related data. Measured values are listed for material, imperfection and residual stress data.

This file includes data on system strength of stainless steel frames under gravity loads obtained from the finite element simulations carried out on six stainless steel frames. This data was used in the analysis carried out and reported in the publication: Input and output data is provided separately for each of the six frames investigated. Frames 1 and 2 correspond to austenitic stainless steel, Frames 3 and 4 to duplex stainless steel and Frames 5 and 6 to ferritic stainless steel.

The data were use to study the degradation of Methylparaben using WO3 Nanostructures. WO3 nanostructures were synthesized with different complexing agents (0.05 M H2O2 and 0.1 M citric acid) and annealing conditions (400 _C, 500 _C and 600 _C) to obtain optimal WO3 nanostructures to use them as a photoanode in the photoelectrochemical (PEC) degradation of an endocrine disruptor chemical. X-ray photoelectron spectroscopy was performed to provide information of the electronic states of the nanostructures. The crystallinity of the samples was observed by a confocal Raman laser microscope and X-ray diffraction. Furthermore, photoelectrochemical measurements (photostability, photoelectrochemical impedance spectroscopy, Mott–Schottky and water-splitting test) were also performed using a solar simulator with AM 1.5 conditions at 100 mW_cm-2. Once the optimal nanostructure was obtained, the PEC degradation of methylparaben was carried out. It was followed by ultra-high-performance liquid chromatography and mass spectrometry, which allowed to obtain the concentration of the contaminant during degradation and the identification of degradation intermediates.