Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 50
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Machine Learning Methods for Pipeline Surveillance Systems Based on Distributed Acoustic Sensing: A Review

  • Tejedor, Javier
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Pastor-Graells, Juan
  • Corredera, Pedro
  • Martín-López, Sonia
There is an increasing interest in researchers and companies on the combination of Distributed Acoustic Sensing (DAS) and a Pattern Recognition System (PRS) to detect and classify potentially dangerous events that occur in areas above fiber optic cables deployed along active pipelines, aiming to construct pipeline surveillance systems. This paper presents a review of the literature in what respect to machine learning techniques applied to pipeline surveillance systems based on DAS+PRS (although its scope can also be extended to any other environment in which DAS+PRS strategies are to be used). To do so, we describe the fundamentals of the machine learning approaches when applied to DAS systems, and also do a detailed literature review of the main contributions on this topic. Additionally, this paper addresses the most common issues related to real field deployment and evaluation of DAS+PRS for pipeline threat monitoring, and intends to provide useful insights and recommendations in what respect to the design of such systems. The literature review concludes that a real field deployment of a PRS based on DAS technology is still a challenging area of research, far from being fully solved., Some authors were supported by funding from the European Research Council through Starting Grant UFINE (grant number #307441), Water JPI, the WaterWorks2014 Cofunded Call, the European Commission (Horizon 2020) through project H2020-MSCA-ITN-2016/722509-FINESSE, the Spanish Ministry of Economy and Competitiveness, the Spanish “Plan Nacional de I+D+i” through projects TEC2013-45265-R, TEC2015-71127-C2-2-R, TIN2013-47630-C2-1-R, and TIN2016-75982-C2-1-R, and the regional program SINFOTONCM: S2013/MIT-2790 funded by the “Comunidad de Madrid”. H.F.M. acknowledges funding through the FP7 ITN ICONE program, grant number #608099 funded by the European Commission. J.P.-G. acknowledges funding from the Spanish Ministry of Economy and Competivity through an FPI contract. SML acknowledges funding from the Spanish Ministry of Science and Innovation through a “Ramón y Cajal” contract., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards detection of pipeline integrity threats using a SmarT fiber-OPtic surveillance system: PIT-STOP project blind field test results

  • Tejedor, J.
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Piote, Daniel
  • Pastor-Graells, Juan
  • Martín-López, Sonia
  • Corredera, Pedro
  • Pauw, G. de
  • Smet, F. de
  • Postvoll, W.
  • Ahien, C. H.
  • González-Herráez, Miguel
4 pags., 1 fig., 1 tab., This paper presents the first report on on-line and final blind field test results of a pipeline integrity threat surveillance system. The system integrates a machine+activity identification mode, and a threat detection mode. Two different pipeline sections were selected for the blind tests: One close to the sensor position, and the other 35 km away from it. Results of the machine+activity identification mode showed that about 46% of the times the machine, the activity or both were correctly identified. For the threat detection mode, 8 out of 10 threats were correctly detected, with 1 false alarm., This work was mainly supported by three GERG partners (Fluxys, Statoil, and Gassco) under project PIT-STOP, and was also supported in part by: the European Research Council through project UFINE (Grant #307441); the EC Horizon 2020 program through the FINESSE project MSCA-ITN-ETN-722509; the DOMINO Water JPI project, under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; the Spanish MINECO through projects TEC2013-45265-R, TEC2015-71127-C2-2-R, and TIN2013-47630-C2-1-R; and the regional program SINFOTON-CM: S2013/MIT-2790. The work of HFM was supported by EU funding through the FP7 ITN ICONE program (Grant #608099). The work of JPG and SML was supported by the Spanish MINECO through FPI and \Ramón y Cajal> contract, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fully Distributed Optical Fiber Strain Sensor With 10−12 ϵ/√Hz Sensitivity

  • Costa, Luis
  • Martins, Hugo F.
  • Martín-López, Sonia
  • Fernández-Ruiz, María R.
  • González-Herráez, Miguel
9 pags., 8 figs., Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities (10 -12 ¿/¿Hz) for km-length distributed sensors in conventional single-mode fibers., This work was supported in part by The European Research Council through project U-FINE under Grant 307441; in part by ITNFINESSE, funded by the European Union’s Horizon 2020 research and innovation program under the Marie-Sklodowska-Curie Action Grant n° 722509; in part by the DOMINO Water JPI project, under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO PCIN-2015-219; in part by the Spanish MINECO through the Project TEC2015-71127-C2-2-R; and in part by the regional program SINFOTON-CM: S2013/MIT-2790. The work of L. Costa was supported by EU funding through the project MSCA-ITN-ETN-722509. The work of S. Martín-López and M. R. Fernández-Ruiz was supported by the Spanish MINECO through a “Ramón y Cajal” and “Juan de la Cierva” contracts, respectively. (Corresponding author: Luis Costa.)
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Modulation instability-induced fading in phase-sensitive optical time-domain reflectometry

  • Fidalgo Martins, Hugo
  • Martín López, Sonia
  • Corredera Guillén, Pedro
  • Salgado Díaz, Pedro
  • Frazao, Orlando
  • González Herráez, Miguel
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Fully distributed optical fiber strain sensor with 10-12 ε/√Hz sensitivity

  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities (?10?12epsilon/?Hz) for km-length distributed sensors in conventional single-mode fibers., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Relative intensity noise transfer reduction in raman-assisted BOTDA systems

  • Angulo Vinuesa, Xabier
  • Bacquet, D.
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Szriftgiser, P.
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman-assistance (RA) has been identified as a promising technique to extend the measurement range of Brillouin optical time-domain analysis (BOTDA)-based distributed sensors. Unfortunately, Raman amplification introduces a great amount of relative intensity noise (RIN) to the detected low-frequency probe wave. This RIN transfer problem has been widely identified as a major limitation in RA-BOTDA. In vector BOTDA (VBOTDA), the detected signal is transferred to a high-frequency carrier where the Raman RIN transfer turns out to be much less harmful. In addition, a VBOTDA can also provide information about the phase-shift induced by the local stimulated Brillouin scattering gain curve, paving the way for dynamic measurements. In this letter, we demonstrate, for the first time to our knowledge, the RA in a VBOTDA obtaining gain and phase measurements. Our results show a significant reduction of the RIN transfer effect in RA-VBOTDA compared with standard RA-BOTDA, making this type of scheme particularly interesting for long-range and dynamic distributed sensing., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Compound Lasing Fiber Optic Ring Resonators for Sensor Sensitivity Enhancement

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
In this study, a new method for increasing simultaneously the sensitivity and interrogation stability of fiber-optic intensity sensors is presented. The configuration is based on a double-coupler ring resonator. On one side, the attenuation sensitivity of the sensor is enhanced by placing it inside a ring resonator. On the other side, the stability of the interrogation method is widely improved by creating an external lasing ring resonator with matched spectral response. The combination of the wavelength selective response of the ring resonator and optical amplification from Er-doped fiber amplifier is used to create different fiber lasers. The resulting lasers present an impressive sensitivity enhancement and a dynamic range increment up to 15 dB. Simultaneously, the instability of the system is reduced to ±0.05 dB. In comparison with systems based on tunable laser interrogation, our method is >100 times more stable and also simpler, as no wavelength tunable elements are required., Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Modulation instability-induced fading in phase-sensitive optical time-domain reflectometry

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Salgado, P.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time-domain reflectometry (φOTDR) is a simple and effective tool allowing the distributed monitoring of vibrations along single-mode fibers. We show in this Letter that modulation instability (MI) can induce a position-dependent signal fading in long-range φOTDR over conventional optical fibers. This fading leads to a complete masking of the interference signal recorded at certain positions and therefore to a sensitivity loss at these positions. We illustrate this effect both theoretically and experimentally. While this effect is detrimental in the context of distributed vibration analysis using φOTDR, we also believe that the technique provides a clear and insightful way to evidence the Fermi-Pasta-Ulam recurrence associated with the MI process., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Modulation instability-induced visibility fading in phase-sensitive OTDR

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Salgado, P.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time domain reflectometry (ΦOTDR) is a simple and effective tool that allows the distributed monitoring of vibrations along single-mode fibers. In this letter we study the effects of modulation instability (MI) in long-range ΦOTDR over conventional optical fibers. We demonstrate both theoretically and experimentally that MI can induce a position-dependent signal fading which leads to a nearly complete visibility loss in the interference signal recorded at certain positions and therefore to a sensitivity loss at these positions. While this effect is detrimental in the context of distributed vibration analysis using ΦOTDR, we also believe that the technique provides a clear and insightful way to evidence the Fermi-Pasta-Ulam (FPU) recurrence associated to the MI process., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

High-sensitivity dispersive Mach–Zehnder interferometer based on a dissimilar-doping dual-core fiber for sensing applications

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Bierlich, J.
  • Wondraczek, K.
  • Unger, S.
  • Kobelke, J.
  • Schuster, K.
  • Marques, M. B.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Frazão, O.
A dual-core fiber in which one of the cores is doped with germanium and the other with phosphorus is used as an in-line Mach–Zehnder dispersive interferometer. By ensuring an equal length but with different dispersion dependencies in the interferometer arms (the two cores), high-sensitivity strain and temperature sensing are achieved. Opposite sensitivities for high and low wavelength peaks were also demonstrated when strain and temperature was applied. To our knowledge this is the first time that such behavior is demonstrated using this type of in-line interferometer based on a dual-core fiber. A sensitivity of 0.102 0.002 nm∕με, between 0 and 800 με and −4.2 0.2 nm∕°C between 47°C and 62°C is demonstrated., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Simple Method for the Elimination of Polarization Noise in BOTDA Using Balanced Detection and Orthogonal Probe Sidebands

  • López Gil, Alexia Inés
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Polarization noise arises in Brillouin optical timedomain analysis due to the strong polarization sensitivity of stimulated Brillouin scattering. To avoid this noise, it turns out to be indispensable to perform some kind of polarization scrambling, either in the pump pulse, the probe signal or both. This is usually achieved using polarization scrambling/switching systems, which, being mechanical, tend to be not as robust as it would be desirable. In this paper, we propose a completely passive system,with no moving parts, to eliminate polarization noise in a BOTDA. It is based on the use of passive depolarization of the pump pulse together with balanced detection among orthogonally polarized Stokes and anti-Stokes bands of the probe signal. The setup requires no alignment readjustment over time and provides a performance similar to a conventional BOTDA using scrambler., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Signal-to-Noise Ratio Improvement in BOTDA Using Balanced Detection

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Brillouin optical time domain analysis (BOTDA) relies typically on the interaction among two counter-propagating waves: 1) a pulsed pump wave and 2) a modulated probe wave. The modulated probe wave has typically two sidebands, located at ±νB with respect to the pump frequency. Conventional systems detect the time-resolved gain/loss by detecting only the upper/lower wavelength sideband. In this letter, we show that BOTDA can strongly benefit from the use of balanced detection among the two sidebands. In particular, the detected signal can be doubled while the noise only grows by a factor of (2)1/2, leading to a (2)1/2 signal-to noise ratio (SNR) increase. Moreover, any common-mode noise in the probe signal path (e.g., master laser noise, modulator drifts, and so forth) is eliminated, rendering the system more robust. We validate the principle by experimental results that highlight the benefits of the technique in terms of the SNR., Comunidad de Madrid, Ministerio de Ciencia e Innovación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Single-shot distributed temperature and strain tracking using direct detection phase-sensitive OTDR with chirped pulses

  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
So far, the optical pulses used in phase-sensitive OTDR (ΦOTDR) were typically engineered so as to have a constant phase along the pulse. In this work, it is demonstrated that by acting on the phase profile of the optical pulses, it is possible to introduce important conceptual and practical changes to the traditional ΦOTDR operation, thus opening a door for new possibilities which are yet to be explored. Using a ΦOTDR with linearly chirped pulses and direct detection, the distributed measurement of temperature/strain changes from trace to trace, with 1mK/4nε resolution, is theoreticaly and experimentaly demonstrated. The measurand resolution and sensitivity can be tuned by acting on the pulse chirp profile. The technique does not require a frequency sweep, thus greatly decreasing the measurement time and complexity of the system, while maintaining the potential for metric spatial resolutions over tens of kilometers as in conventional ΦOTDR. The technique allows for measurements at kHz rates, while maintaining reliability over several hours., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Novel scanning method for distortion-free BOTDA measurements

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Zhisheng, Yang
  • Soto Hernández, Marcelo Alfonso
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
Systematic errors induced by distortions in the pump pulse of conventional Brillouin distributed fiber sensors are thoroughly investigated. Experimental results, supported by a theoretical analysis, demonstrate that the two probe sidebands in standard Brillouin optical time-domain analyzers provide a non-zero net gain on the pump pulse, inducing severe distortions of the pump when scanning the pump-probe frequency offset, especially at high probe power levels. Compared to the impact of non-local effects reported in the state-of-the-art, measurements here indicate that for probe powers in the mW range (below the onset of amplified spontaneous Brillouin scattering), the obtained gain and loss spectra show two strong side-lobes that lead to significant strain/temperature errors. This phenomenon is not related to the well-known spectral hole burning resulting from pump depletion, but it is strictly related to the temporal and spectral distortions that the pump pulse experiences when scanning the Brillouin gain/loss spectrum. As a solution to this problem, a novel scanning scheme for Brillouin sensing is proposed. The method relies on a fixed frequency separation between the two probe sidebands, so that a flat zero net gain is achieved on the pump pulse when scanning the pump-probe frequency offset. The proposed technique is experimentally validated, demonstrating its ability to completely cancel out non-local effects up to a probe power ultimately limited by the onset of amplified spontaneous Brillouin scattering. The method allows for one order of magnitude improvement in the figure-of-merit of optimized long-range Brillouin distributed fiber sensors, enabling measurements along a 100 km-long sensing fiber with 2 m spatial resolution and with no need of added features for performance enhancement., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Simple Baseband Method for the Distributed Analysis of Brillouin Phase-Shift Spectra

  • López Gil, Alexia Inés
  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
The phase shift feature of stimulated Brillouin scattering is rarely used for the development of sensors based on the Brillouin optical time-domain analysis (BOTDA). However, this feature shows significant interest for sensing thanks to its linear dependence around the Brillouin frequency shift. Until now, distributed Brillouin phase shift (BPS) measurements required complex modulations, high-bandwidth detection, and sharp filtering. Recently, we introduced the possibility of developing simple distributed measurements of BPS in BOTDA using the baseband technology. The basic idea was the use of a Sagnac interferometer coupled to a conventional BOTDA without filtering and incorporating balanced detection. Although the concept was demonstrated, the setup proposed (using a 2 × 2 optical coupler) had significant shortcomings, the main one being its lack of stability due to the need of setting the interferometer bias through the polarization of the interacting waves. This restricted severely the practicality of the method. In this letter, we propose a setup with enhanced stability thanks to the use of a 3 × 3 optical coupler. With this configuration, the impact of the drifts along the measurement is strongly reduced, and the quality of the measurements improves substantially. The method is theoretically studied and demonstrated experimentally., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Raman-assisted Vector Brillouin Optical Time Domain Analysis

  • Angulo Vinuesa, Xabier
  • Bacquet, D.
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Szriftgiser, P.
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman-assistance (RA) has become a promising technique to enhance the sensing range of standard Brillouin Optical Time Domain Analysis (BOTDA) fiber sensors due to its ability to amplify in a distributed way all the interacting signals within the fiber. Unfortunately, Raman amplification introduces a great amount of Relative Intensity Noise (RIN) to the detected low-frequency probe wave. This RIN transfer problem has been widely identified as a major limitation in RABOTDA. In Vector Brillouin Optical Time Domain Analysis (VBOTDA) the detected signal is transferred to a highfrequency carrier where the Raman RIN transfer turns out to be much less harmful. In this work we demonstrate, for the first time to our knowledge, Raman-assistance in a VBOTDA. Our results show significant reduction of the RIN transfer effect in RA-VBOTDA compared to standard RA-BOTDA, making this type of scheme particularly interesting for long range distributed sensing., European Commission, Ministerio de Economía y Competividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Gain vs phase in BOTDA setups

  • López Gil, Alexia Inés
  • Angulo Vinuesa, Xabier
  • Soto Hernández, Marcelo Alfonso
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
We evaluate the Brillouin frequency shift (BFS) determination error when using the Brillouin phase spectrum (BPS) instead of the Brillouin gain spectrum (BGS) in BOTDA setups. We compare the error obtained in the BFS determination in both cases, both with theoretical arguments and experimental data. In comparison to the gain, for an equal SNR and linewidth, the phase generally provides a better fit of the BFS for smaller frequency spans. This result opens a possible way to reduce the measurement time of certain BOTDA systems by using the phase feature, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Sub-metric spatial resolution over an extended range using differential time-domain Brillouin sensing

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Soto Hernández, Marcelo Alfonso
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
This paper reports on a distributed fiber sensing scheme to achieve sub-metric spatial resolution and long sensing ranges based on a differential pulse-width pair (DPP) Brillouin sensor. The scheme uses a scanning method in which the spectral separation between the two probe sidebands is kept constant, while the optical frequency of the pump is swept to scan the Brillouin spectral response. Experimental results show that the method avoids detrimental temporal distortions of the pulses, which in a standard implementation prevent the DPP method to operate over long distances. Here we demonstrate that this novel scanning method enables distributed sensing over 37.5 km with a spatial resolution of 20 cm and a frequency uncertainty of 1.9 MHz, obtained with 2k averages in a measurement time of a few minutes., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Compound lasing fiber optic ring resonators for sensing

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
In this work, we present a new method for increasing simultaneously the sensitivity and interrogation stability of fiberoptic intensity sensors. The configuration is based on a double-coupler ring resonator. On one side, the attenuation sensitivity of the sensor is enhanced by placing it inside a ring resonator. On the other side, the stability of the interrogation method is rendered close to perfect by creating an external lasing ring resonator with matched spectral response. The resulting lasers allow the stable interrogation of the sensors with an impressive sensitivity enhancement. In our experiments, the dynamic range of the intensity sensor (and consequently its sensitivity) is increased 15 dB by using this laser-based interrogation system. Simultaneously, the instability of the system is reduced to ±0.05 dB. In comparison with systems based on external interrogation, our method is <100 times more stable and also simpler, as no wavelength tunable elements are required., Ministerio de Ciencia e Innovación, Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Exploiting nonreciprocity in BOTDA systems

  • López Gil, Alexia Inés
  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
In this Letter, we present and demonstrate a novel technique for distributed measurements in Brillouin optical time-domain analysis based on the use of the nonlinear phase-shift induced by stimulated Brillouin scattering. Employing a Sagnac interferometer (SI), the position-resolved Brillouin phase-shift spectrum (BPS) along the fiber can be obtained, benefiting from the sensitivity to nonreciprocal phase-shifts of the SI scheme. This proposal simplifies the existing methods to retrieve the BPS distribution along an optical fiber since phase modulation, filtering, and high-bandwidth detectors are not required. The fundamentals of the technique are described theoretically and validated through numerical simulations and experimental measurements., European Commission, Ministerio de Economía y Competitivdad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Distributed phase birefringence measurements based on polarization correlation in phase-sensitive optical time-domain reflectometers

  • Soto Hernández, Marcelo Alfonso
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
In this paper a technique to measure the distributed birefringence profile along optical fibers is proposed and experimentally validated. The method is based on the spectral correlation between two sets of orthogonally-polarized measurements acquired using a phase-sensitive optical time-domain reflectometer (φOTDR). The correlation between the two measured spectra gives a resonance (correlation) peak at a frequency detuning that is proportional to the local refractive index difference between the two orthogonal polarization axes of the fiber. In this way the method enables local phase birefringence measurements at any position along optical fibers, so that any longitudinal fluctuation can be precisely evaluated with metric spatial resolution. The method has been experimentally validated by measuring fibers with low and high birefringence, such as standard single-mode fibers as well as conventional polarizationmaintaining fibers. The technique has potential applications in the characterization of optical fibers for telecommunications as well as in distributed optical fiber sensing., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Phase-measuring time-gated BOCDA

  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
We demonstrate a simple scheme that allows performing distributed Brillouin phase spectrum (BPS) measurements with very high spatial resolution (~7 cm) over long (~4.7 km) optical fibers. This is achieved by inserting a Sagnac interferometer (SI) in a Brillouin optical correlation domain analysis (BOCDA) configuration. Over its already-presented time-domain equivalent (SI-BOTDA), this approach reduces the main source of noise (coherent backscatter noise) thanks to the low-coherence nature of the used signals. On the other hand, over the most usual schemes used for distributed BPS measurements, this implementation presents the key advantage of not requiring high-bandwidth detection or complex modulation while reaching unprecedented values of spatial resolution and number of resolved points for this type of measurement. Thanks to the linear dependence of the BPS feature around the Brillouin frequency shift, this scheme could also have the advantage of requiring shorter scanning ranges than amplitude-based configurations., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Limits of BOTDA Range Extension Techniques

  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Ania Castañón, Juan Diego
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Brillouin-based temperature and strain sensors have attracted great attention of both the academic and industrial sectors in the past few decades due to their ability to perform distributed measurements. Particularly, Brillouin Optical Time Domain Analysis (BOTDA) systems have been applied in many different scenarios, proving particularly useful in those requiring especially wide coverage ranging extremely long distances, such as in civil structure monitoring, energy transportation or environmental applications. The extension of the measuring range in these sensors has therefore become one of the main areas of research and development around BOTDA. To do so, it is necessary to increase the Signal to Noise Ratio (SNR) of the retrieved signal. So far, several techniques have been applied in order to achieve this goal, such as pre-amplification before detection, pulse coding or Raman amplification. Here, we analyze these techniques in terms of their performance limits and provide guidelines that can assist in finding out which is the best configuration to break current range limitations. Our analysis is based on physical arguments as well as current literature results., European Commission, Ministerio de Economía y Competitividad, Universidad de Alcalá, Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Strong Cancellation of RIN Transfer in a Raman-Assisted BOTDA Using Balanced Detection

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman assistance is one of the most interesting routes toward extending the range of Brillouin optical timedomain analysis (BOTDA) systems. Unfortunately, the use of Raman amplification normally entails an important relative intensity noise (RIN) transfer toward the probe wave, which severely limits this approach. In this letter, we show that the RIN transfer problem can be effectively avoided using a slightly modified scheme comprising a dual-sideband modulated probe and balanced detection. Our measurements clearly indicate a nearly complete cancellation of the RIN noise in the detected trace signal. The use of balanced detection in our Raman-assisted BOTDA setup implies a fivefold increase in figure of merit compared with the same setup using conventional detection., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Evaluation of the accuracy of BOTDA systems based on the phase spectral response

  • López Gil, Alexia Inés
  • Soto Hernández, Marcelo Alfonso
  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
We evaluate the Brillouin frequency shift (BFS) determination error when utilizing the Brillouin phase spectrum (BPS) instead of the Brillouin gain spectrum (BGS) in BOTDA systems. Systems based on the BPS perform the determination of the BFS through a linear fit around the zero de-phase frequency region. An analytical expression of the error obtained in the BFS determination as a function of the different experimental parameters is provided and experimentally validated. The experimental results show a good agreement with the theoretical predictions as a function of the number of sampling points, signal-to-noise ratio (SNR) and Brillouin spectral linewidth. For an equal SNR and linewidth, the phase response only provides a better BFS estimation than the gain response when the fit is performed over a restricted frequency range around the center of the spectral profile. This may reduce the measurement time of specific BOTDA systems requiring a narrow frequency scanning. When the frequency scan covers most of the Brillouin spectral profile, gain and phase responses give very similar estimations of the BFS and the BPS offers no crucial benefit., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Distributed vibration sensing over 125 km with enhanced SNR using ΦOTDR over a URFL cavity

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
We describe the use of a phase-sensitive optical time domain reflectometer (ΦOTDR) over an ultra-long Raman fiber laser cavity allowing fully distributed detection of vibrations over 125 km. Compared to a first-order Raman-assisted ΦOTDR, this scheme shows an enhanced signal-to-noise ratio (SNR). This is due to the fact that the relative intensity noise introduced by the Raman amplification is mostly transferred to a lower frequency range, where the balanced detection implemented in the setup provides better suppression of the common-mode noise. The sensor was able to measure vibrations of up to 380 Hz (limit set by the time of flight of light pulses) in a distance of 125 km with a resolution of 10 m and an average SNR of 8 dB with no postprocessing. This implies a >3 dB improvement in SNR over a first-order Raman-assisted setup with similar characteristics, Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

PROUD-based method for simple real-time in-line characterization of propagation-induced distortions in NRZ data signals

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Cortés, L.R.
  • Piote, D.
  • Martín López, Sonia|||0000-0001-5203-6206
  • Azaña, José
  • González Herráez, Miguel|||0000-0003-2555-2971
A simple, in-line method for real-time full characterization (amplitude and phase) of propagation distortions arising due to group velocity dispersion and self-phase modulation on 10-20 Gbps transmitted NRZ optical signals is reported. It is based on phase reconstruction using optical ultrafast differentiation (PROUD), a linear and self-referenced technique. The flexibility of the technique is demonstrated by characterizing different data stream scenarios. Experimental results were modelled using conventional propagation equations, showing good agreement with the measured data. It is envisaged that the proposed method could be used in combination with DSP techniques for the estimation and compensation of propagation distortions in fiber links, not only in conventional IM/DD systems but also in coherent systems with advanced modulation formats., European Commission, Comunidad de Madrid, Ministerio de Economía y Competitividad, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Phase-sensitive optical time domain reflectometer assisted by first-order raman amplification for distributed vibration sensing over >100 km

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Filograno, M. L.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
In this study, the authors present an experimental and theoretical description of the use of first order Raman amplification to improve the performance of a Phase-sensitive optical time domain reflectometer (φ OTDR) when used for vibration measurements over very long distances. A special emphasis is given to the noise which is carefully characterized and minimized along the setup. A semiconductor optical amplifier and an optical switch are used to greatly decrease the intra-band coherent noise of the setup and balanced detection is used to minimize the effects of RIN transferred from the Raman pumps. The sensor was able to detect vibrations of up to 250 Hz (close to the limits set by the time of flight of light pulses) with a resolution of 10 m in a range of 125 km. To achieve the above performance, no post-processing was required in the φOTDR signal. The evolution of the φOTDR signal along the fiber is also shown to have a good agreement with the theoretical model., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Long-range static and dynamic distributed sensing

  • González Herráez, Miguel|||0000-0003-2555-2971
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Angulo Vinuesa, Xabier
  • Corredera Guillén, Pedro
In the past few decades, Brillouin-based distributed temperature and strain sensors have attracted the attention of both the academic and industrial sectors. In particular, B-OTDA systems have been lately a trendy study area due to their numerous and well proofed applications, such as in monitoring large civil structures, energy transportation or environmental applications. One of the main areas of research in B-OTDA sensors focuses on the extension of the measuring range. To do so, it becomes necessary to increase the signal to noise ratio (SNR) of the sensor, in particular considering the reduced signal contrast at the far end of the fiber. Several techniques have been applied in order to achieve this goal, such as Raman amplification and pulse coding. Here, we review some of these techniques (particularly Raman amplification) and their application for range extension of these sensors beyond the 100 km range. In addition, we discuss routes to perform dynamic measurements over such ultra-long spans, European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Slow-light and enhanced sensitivity in a displacement sensor using a lossy fiber-based ring resonator, Slow-light assisted displacement sensor using a lossy fiber-based ring resonator

  • Bravo, M.
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • López-Amo, M.
  • González Herráez, Miguel|||0000-0003-2555-2971
Along the last years, much debate has been done on the efficiency of slow-light phenomena in order to enhance light-matter interactions, especially for sensing purposes. This improvement could be key to develop more compact and sensitive devices. In this work we develop an all-fiber sub-micrometric displacement sensor using slow-light sensitivity enhancement in a lossy ring resonator. In the proposed structure the losses produced by the displacement of a mechanic transducer can be translated into strong variations of group index and therefore strong transmittance variations. We show that this effect is strictly related to slow light, and not related to confinement effects or any other., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

All-optical flip-flops based on dynamic Brillouin gratings in fibers

  • Soto Hernández, Marcelo Alfonso
  • Denisov, A.
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
A method to generate an all-optical flip-flop is proposed and experimentally demonstrated based on dynamic Brillouin gratings (DBGs) in polarization maintaining fibers. In a fiber with sufficiently uniform birefringence, this flip-flop can provide extremely long storage times and ultra-wide bandwidth. The experimental results demonstrate an all-optical flip-flop operation using phase-modulated pulses of 300 ps and a 1 m long DBG. This has led to a time-bandwidth product of ∼30, being in this proof-of-concept setup mainly limited by the relatively low bandwidth of the used pulses and the short fiber length., European Commission, Swiss National Science Foundation, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Speckle Analysis Method for Distributed Detection of Temperature Gradients with ΦOTDR

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
A method to extend the operation of traditional single-frequency phase-sensitive optical time-domain reflectometry (ΦOTDR) to the monitoring of distributed temperature gradients along an optical fiber is proposed and experimentally validated. The measurement principle is derived from the perturbation response of a single-wavelength ΦOTDR signal, which is analyzed as a unidimensional speckle pattern. The method could be implemented in parallel to standard ΦOTDR systems used for distributed vibration sensing with a close to zero cost and without affecting its operation, as it only requires a low computational cost post-processing of the traces which are already acquired. Frequency scanning of the laser, heterodyning or additional hardware are not required. The distributed detection of a temperature gradient of 2.5 °C over 10 min is demonstrated., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Coherent noise reduction in high visibility phase-sensitive optical time domain reflectometer for distributed sensing of ultrasonic waves

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Filograno, M. L.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time domain reflectometry (\phi \hbox{OTDR}) is a simple and effective tool allowing the distributed monitoring of vibrations along single-mode fibers. Up to now, \phi {\rm OTDRs} have been used mostly for the measurement of sub-kHz vibrations, normally in the context of intrusion sensing. In this paper, the authors present an experimental and theoretical description of a high-visibility \phi {\rm OTDR} and its performance when used for ultrasonic vibration measurements. The use of a semiconductor optical amplifier in the setup allows to suppress coherent noise and also to improve the spectral response of the pump pulses. These two advantages greatly decrease the detected intra-band noise thus allowing frequency measurements in the limits set by the time of flight of the light pulses while maintaining the simplicity of the scheme, as no post-processing, extremely high coherence lasers or coherent detection methods are required. The sensor was able to measure vibrations of up to 39.5 kHz with a resolution of 5 m over a range which could go up to 1.25 km. This is the first time to our knowledge that a fully distributed measurement of ultrasonic waves was achieved. The statistical behavior of the system was also described theoretically and characterized experimentally, European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Improved time-resolved acousto-optic technique for optical fiber analysis of axial nonuniformities by using edge interrogation

  • Alcusa-Sáez, E. P.
  • Díez, A.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Andrés, M.V.
The time-resolved acousto-optic technique demonstrated recently to be a very useful method for the analysis of fiber axial non-uniformities, able to detect variations of fiber diameter in the nanometric scale with a spatial resolution of few cm. An edge interrogation approach is proposed to improve further the performance of this technique. The detection of subnanometer fiber diameter changes or sub-ppm changes of the core refractive index is demonstrated., Ministerio de Economía y Competitividad, Generalitat Valenciana, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Non-local effects in dual-probe-sideband Brillouin optical time domain analysis

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Angulo Vinuesa, Xabier
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
According to recent models, non-local effects in dual-probesideband Brillouin Optical Time Domain Analysis (BOTDA) systems should be essentially negligible whenever the probe power is below the Stimulated Brillouin Scattering (SBS) threshold. This paper shows that actually there appear non-local effects in this type of systems before the SBS threshold. To explain these effects it is necessary to take into account a full spectral description of the SBS process. The pump pulse experiences a frequency-dependent spectral deformation that affects the readout process differently in the gain and loss configurations. This paper provides a simple analytical model of this phenomenon, which is validated against compelling experimental data, showing good agreement. The main conclusion of our study is that the measurements in gain configuration are more robust to this non-local effect than the loss configuration. Experimental and theoretical results show that, for a total probe wave power of ~1 mW (500 μW on each sideband), there is an up-shifting of ~1 MHz in the Brillouin Frequency Shift (BFS) retrieved from the Brillouin Loss Spectrum, whereas the BFS extracted from the measured Brillouin Gain Spectrum is up-shifted only ~0.6 MHz. These results are of particular interest for manufacturers of longrange BOTDA systems., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Real time dynamic strain monitoring of optical links using the backreflection of live PSK data

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Shi, K.
  • Thomsen, B.C.
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Savory, S.J.
A major cause of faults in optical communication links is related to unintentional third party intrusions (normally related to civil/agricultural works) causing fiber breaks or cable damage. These intrusions could be anticipated and avoided by monitoring the dynamic strain recorded along the cable. In this work, a novel technique is proposed to implement realtime distributed strain sensing in parallel with an operating optical communication channel. The technique relies on monitoring the Rayleigh backscattered light from optical communication data transmitted using standard modulation formats. The system is treated as a phase-sensitive OTDR (ΦOTDR) using random and non-periodical non-return-to-zero (NRZ) phase-shift keying (PSK) pulse coding. An I/Q detection unit allows for a full (amplitude, phase and polarization) characterization of the backscattered optical signal, thus achieving a fully linear system in terms of ΦOTDR trace coding/decoding. The technique can be used with different modulation formats, and operation using 4 Gbaud single-polarization dual PSK and 4 Gbaud dual-polarization quadrature PSK is demonstrated. As a proof of concept, distributed sensing of dynamic strain with a sampling of 125 kHz and a spatial resolution of 2.5 cm (set by the bit size) over 500 m is demonstrated for applied sinusoidal strain signals of 500 Hz. The limitations and possibilities for improvement of the technique are also discussed., European Commission, Engineering and Physical Sciences Research Council, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Extending the real remoteness of long-range brillouin optical time-domain fiber analyzers

  • Soto Hernández, Marcelo Alfonso
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Chin, S.H.
  • Ania Castañón, Juan Diego
  • Corredera Guillén, Pedro
  • Rochat, Etienne
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
The real remoteness of a distributed optical fiber sensor based on Brillouin optical time-domain analysis is considerably extended in this paper using seeded second-order Raman amplification and optical pulse coding. The presented analysis and the experimental results demonstrate that a proper optimization of both methods combined with a well-equalized two-sideband probe wave provide a suitable solution to enhance the signal-to-noise ratio of the measurements when an ultra-long sensing fiber is used. In particular, the implemented system is based on an extended optical fiber length, in which half of the fiber is used for sensing purposes, and the other half is used to carry the optical signals to the most distant sensing point, providing also a long fiber for distributed Raman amplification. Power levels of all signals launched into the fiber are properly optimized in order to avoid nonlinear effects, pump depletion, and especially any power imbalance between the two sidebands of the probe wave. This last issue turns out to be extremely important in ultra-long Brillouin sensing to provide strong robustness of the system against pump depletion. This way, by employing a 240 km-long optical fiber-loop, sensing from the interrogation unit up to a 120 km remote position (i.e., corresponding to the real sensing distance away from the sensor unit) is experimentally demonstrated with a spatial resolution of 5 m. Furthermore, this implementation requires no powered element in the whole 240 km fiber loop, providing considerable advantages in situations where the sensing cable crosses large unmanned areas., Ministerio de Ciencia e Innovación, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Long-range distributed optical fiber hot-wire anemometer based on chirped-pulse ΦTDR

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
We demonstrate a technique allowing to develop a fully distributed optical fiber hot-wire anemometer capable of reaching a wind speed uncertainty of ~ ± 0.15 m/s (± 0.54 km/h) at only 60 mW/m of dissipated power in the sensing fiber, and within only four minutes of measurement time. This corresponds to similar uncertainty values than previous papers on distributed optical fiber anemometry but requires two orders of magnitude smaller dissipated power and covers at least one order of magnitude longer distance. This breakthrough is possible thanks to the extreme temperature sensitivity and single-shot performance of chirped-pulse phase-sensitive optical time domain reflectometry (PhiOTDR), together with the availability of metal-coated fibers. To achieve these results, a modulated current is fed through the metal coating of the fiber, causing a modulated temperature variation of the fiber core due to Joule effect. The amplitude of this temperature modulation is strongly dependent on the wind speed at which the fiber is subject. Continuous monitoring of the temperature modulation along the fiber allows to determine the wind speed with unprecedented low power injection requirements. Moreover, this procedure makes the system immune to temperature drifts of the fiber, potentially allowing for a simple field deployment. Being a much less power-hungry scheme, this method also comfortably allows for monitoring over much longer distances, in the orders of 10s of km. We expect that this system can have application in dynamic line rating and lateral wind monitoring in railway catenary wires., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Distributed photothermal spectroscopy in microstructured optical fibers: towards high-resolution mapping of gas presence over long distances

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Hey Tow, Kenny
  • Thévenaz, Luc
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Chemical sensing using optical fibers is often challenging, as it is generally difficult to achieve strong interaction between the guided light and the analyte at the wavelength of interest for performing the detection. Despite this difficulty, many schemes exist (and can be found in the literature) for point chemical fiber sensors. However, the challenge increases even further when it comes to performing fully distributed chemical sensing. In this case, the optical signal which interacts with the analyte is typically also the signal that has to travel to and from the interrogator: for a good sensitivity, the light should interact strongly with the analyte, leading inevitably to an increased loss and a reduced range. Few works in the literature actually provide demonstrations of truly distributed chemical sensing and, although there have been several attempts to realize these sensors (e.g. based on special fiber coatings), the vast majority of these attempts has failed to reach widespread use due to several reasons, among them: lack of sensitivity or selectivity, lack of range or resolution, cross sensitivity to temperature or strain, or need to work at specific wavelengths where fiber instrumentation becomes extremely expensive or unavailable. In this work we provide a preliminary demonstration of the possibility of achieving distributed detection of gas presence with spectroscopic selectivity, high spatial resolution, potential for long range measurements and feasibility of having most of the interrogator system working at conventional telecom wavelengths. For a full exploitation of this concept, new fibers (or more likely, fiber bundles) should be developed capable of guiding specific wavelengths in the IR (corresponding to gas absorption wavelengths) with good overlap with the analyte while also having a solid core with good transmission behavior at 1.55 μm, and good thermal coupling between the two guiding structures., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Toward prevention of pipeline integrity threats using a smart fiber-optic surveillance system

  • Tejedor Noguerales, Javier
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Piote, D.
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • De Smet, F.
  • Postvoll, W.
  • González Herráez, Miguel|||0000-0003-2555-2971
This paper presents the first available report in the literature of a system aimed at the detection and classification of threats in the vicinity of a long gas pipeline. The system is based on phase-sensitive optical time-domain reflectometry technology for signal acquisition and pattern recognition strategies for threat identification. The system operates in two different modes: 1) machine+activity identification, which outputs the activity being carried out by a certain machine; and 2) threat detection, aimed at detecting threats no matter what the real activity being conducted is. Different strategies dealing with position selection and normalization methods are presented and evaluated using a rigorous experimental procedure on realistic field data. Experiments are conducted with eight machine+activity pairs, which are further labeled as threat or nonthreat for the second mode of the system. The results obtained are promising given the complexity of the task and open the path to future improvements toward fully functional pipeline threat detection systems operating in real conditions., European Commission, Comunidad de Madrid, Ministerio de Economía y Competitividad, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

SNR enhancement in high-resolution phasesensitive OTDR systems using chirped pulse amplification concepts

  • Pastor Graells, Juan
  • Romero Cortés, Luis
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Azaña, José
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time-domain reflectometry (φOTDR) is widely used for the distributed detection of mechanical or environmental variations with resolutions of typically a few meters. The spatial resolution of these distributed sensors is related to the temporal width of the input probe pulses. However, the input pulse width cannot be arbitrarily reduced (to improve the resolution), since a minimum pulse energy is required to achieve a good level of signal-to-noise ratio (SNR), and the pulse peak power is limited by the advent of nonlinear effects. In this Letter, inspired by chirped pulse amplification concepts, we present a novel technique that allows us to increase the SNR by several orders of magnitude in φOTDR-based sensors while reaching spatial resolutions in the centimeter range. In particular, we report an SNR increase of 20 dB over the traditional architecture, which is able to detect strain events with a spatial resolution of 1.8 cm., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Phase-sensitive OTDR probe pulse shapes robust against modulation-instability fading

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Typical phase-sensitive optical time-domain reflectometry (ϕOTDR) schemes rely on the use of coherent rectangular-shaped probe pulses. In these systems, there is a trade-off between the signal-to-noise ratio (SNR), spatial resolution, and operating range of the ϕOTDR system. To increase any of these parameters, an increase in the pulse peak power is usually indispensable. However, as it is well known, there is a limit in the allowable increase in probe power due to the onset of undesired nonlinear effects such as modulation instability. In this Letter, we perform an analysis of the effect of the probe pulse shape on the visibility fading due to modulation instability. In particular, four different temporal profiles are chosen: rectangular, Gaussian, triangular, and super-Gaussian (order 2). Our numerical and experimental analyses reveal that the use of triangular or Gaussian-like pulses can significantly inhibit the visibility fading issues. As such, an increase in the range up to twofold for the same pulse energy (i.e., SNR) and nominal spatial resolution can be achieved, as compared with the results obtained when using rectangular pulses. This is due to a more robust behavior of the Gaussian and triangular pulses against the Fermi–Pasta–Ulam recurrence occurring in modulation instability., Comunidad de Madrid, Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Sidelobe apodization in optical pulse compression reflectometry for fiber optic distributed acoustic sensing

  • Mompó, J.J.
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Loayssa, A.
We demonstrate a technique to reduce the sidelobes in optical pulse compression reflectometry for distributed acoustic sensing. The technique is based on using a Gaussian probe pulse with linear frequency modulation. This is shown to improve the sidelobe suppression by 13 dB compared to the use of square pulses without any significant penalty in terms of spatial resolution. In addition, a 2.25 dB enhancement in signal-to-noise ratio is calculated compared to the use of receiver-side windowing. The method is tested by measuring 700 Hz vibrations with a 140 nϵ amplitude at the end of a 50 km fiber sensing link with 34 cm spatial resolution, giving a record 147,058 spatially resolved points., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Real field deployment of a smart fiber optic surveillance system for pipeline integrity threat detection: architectural issues and blind field test results

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • De Pauw, G.
  • De Smet, F.
  • Postvoll, W.
  • Ahlen, C.H.
  • González Herráez, Miguel|||0000-0003-2555-2971
This paper presents an on-line augmented surveillance system that aims to real time monitoring of activities along a pipeline. The system is deployed in a fully realistic scenario and exposed to real activities carried out in unknown places at unknown times within a given test time interval (socalled blind field tests). We describe the system architecture that includes specific modules to deal with the fact that continuous on-line monitoring needs to be carried out, while addressing the need of limiting the false alarms at reasonable rates. To the best or our knowledge, this is the first published work in which a pipeline integrity threat detection system is deployed in a realistic scenario (using a fiber optic along an active gas pipeline) and is thoroughly and objectively evaluated in realistic blind conditions. The system integrates two operation modes: The machine+activity identification mode identifies the machine that is carrying out a certain activity along the pipeline, and the threat detection mode directly identifies if the activity along the pipeline is a threat or not. The blind field tests are carried out in two different pipeline sections: The first section corresponds to the case where the sensor is close to the sensed area, while the second one places the sensed area about 35 km far from the sensor. Results of the machine+activity identification mode showed an average machine+activity classification rate of 46:6%. For the threat detection mode, 8 out of 10 threats were correctly detected, with only 1 false alarm appearing in a 55:5-hour sensed period., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Fiber-based distributed bolometry

  • Teixeira Magalhaes, Regina Manuela
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pereira, João
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Optical fibers are inherently designed to allow no interaction between the guided light and the surrounding optical radiation. Thus, very few optical fiber-based technologies exist in the field of optical radiation sensing. Accomplishing fully-distributed optical radiation sensing appears then as even more challenging since, on top of the lack of sensitivity explained above, we should add the need of addressing thousands of measurement points in a single, continuous optical cable. Nevertheless, it is clear that there exist a number of applications which could benefit from such distributed sensing scheme, particularly if the sensitivity was sufficiently high to be able to measure correctly variations in optical radiation levels compatible with the earth surface. Distributed optical radiation sensing over large distances could be employed in applications such as Dynamic Line Rating (DLR), where it is known that solar radiation can be an important limiting factor in energy transmission through overhead power cables, and also in other applications such as thermo-solar energy. In this work, we present the proof-of-concept of the first distributed bolometer based on optical fiber technology and capable of detecting absolute changes of irradiance. The core idea of the system is the use of a special fiber coating with high emissivity (e.g. carbon coating or black paint). The high absorption of these coatings translates into a temperature change that can be read with sufficiently high sensitivity using phase-sensitive reflectometry. To demonstrate the concept, we interrogate distinct black-coated optical fibers using a chirped-pulse PhiOTDR, and we readily demonstrate the detection of light with resolutions in the order of 1% of the reference solar irradiance, offering a high potential for integration in the aforementioned applications., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Resolving 1 million sensing points in an optimized differential time‐domain Brillouin sensor

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Soto Hernández, Marcelo Alfonso
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
A differential pulse-width pair (DPP) Brillouin distributed fiber sensor is implemented to achieve centimetric spatial resolution over distances of several kilometers. The presented scheme uses a scanning method in which the spectral separation between the two probe sidebands is kept constant, while the optical frequency of the pump is swept to scan the Brillouin spectral response. Experimental results show that this method avoids detrimental temporal distortions of the pump pulses, which in a standard implementation prevent the DPP method from operating over mid-to-long distances. Such a novel scanning procedure allows the resolving, for the first time in pure time-domain Brillouin sensors, of 1,000,000 sensing points, i.e., 1 cm spatial resolution over 10 km in a conventional acquisition time., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Laser phase-noise cancellation in chirped-pulse distributed acoustic sensors

e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Hermetic carbon coatings for electro-thermal all-fiber phase modulators

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Teixeira Magalhaes, Regina Manuela
  • Pereira, João
  • Tarasenko, Oleksandr
  • Norin, Lars
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Joule effect and thermal response of several carbon-coated fibers are modelled and analysed. An electro-thermally driven all-fiber phase modulator based on these principles is proposed and a proof of concept of it is characterized. This kind of fibers could be the basis for developing all-fiber components aimed to operate in environments where the strength increase and impermeability to hydrogen diffusion guaranteed by the carbon coating is crucial., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

A Contextual GMM-HMM Smart Fiber Optic Surveillance System for Pipeline Integrity Threat Detection

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
This paper presents a novel pipeline integrity surveillance system aimed to the detection and classification of threats in the vicinity of a long gas pipeline. The sensing system is based on phase-sensitive optical time domain reflectometry ( $\phi$ -OTDR) technology for signal acquisition and pattern recognition strategies for threat identification. The proposal incorporates contextual information at the feature level in a Gaussian Mixture Model-Hidden Markov Model (GMM-HMM)-based pattern classification system and applies a system combination strategy for acoustic trace decision. System combination relies on majority voting of the decisions given by the individual contextual information sources and the number of states used for HMM modelling. The system runs in two different modes: (1) machine+activity identification, which recognizes the activity being carried out by a certain machine, and (2) threat detection, aimed to detect threats no matter what the real activity being conducted is. In comparison with the previous systems based on the same rigorous experimental setup, the results show that the system combination from the contextual feature information and the GMM-HMM approach improves the results for both machine+activity identification (7.6% of relative improvement with respect to the best published result in the literature on this task) and threat detection (26.6% of relative improvement in the false alarm rate with 2.1% relative reduction in the threat detection rate)., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Fully distributed optical fiber strain sensor with 10−12ε/√Hz sensitivity

  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities (&#8764;10&#8722;12epsilon/&#8730;Hz) for km-length distributed sensors in conventional single-mode fibers., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid