Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

TECNALIA Publications
Publication Artículo científico (JournalArticle)

A Fail-Operational Control Architecture Approach and Dead-Reckoning Strategy in Case of Positioning Failures

  • Matute-Peaspan, Jose Angel
  • Perez, Joshue
  • Zubizarreta, Asier
Presently, in the event of a failure in Automated Driving Systems, control architectures rely on hardware redundancies over software solutions to assure reliability or wait for human interaction in takeover requests to achieve a minimal risk condition. As user confidence and final acceptance of this novel technology are strongly related to enabling safe states, automated fall-back strategies must be assured as a response to failures while the system is performing a dynamic driving task. In this work, a fail-operational control architecture approach and dead-reckoning strategy in case of positioning failures are developed and presented. A fail-operational system is capable of detecting failures in the last available positioning source, warning the decision stage to set up a fall-back strategy and planning a new trajectory in real time. The surrounding objects and road borders are considered during the vehicle motion control after failure, to avoid collisions and lane-keeping purposes. A case study based on a realistic urban scenario is simulated for testing and system verification. It shows that the proposed approach always bears in mind both the passenger’s safety and comfort during the fall-back maneuvering execution.
TECNALIA Publications
Publication Artículo científico (JournalArticle)

Lateral-acceleration-based vehicle-models-blending for automated driving controllers

  • Matute-Peaspan, Jose A.
  • Marcano, Mauricio
  • Diaz, Sergio
  • Zubizarreta, Asier
  • Perez, Joshue
Model-based trajectory tracking has become a widely used technique for automated driving system applications. A critical design decision is the proper selection of a vehicle model that achieves the best trade-off between real-time capability and robustness. Blending different types of vehicle models is a recent practice to increase the operating range of model-based trajectory tracking control applications. However, current approaches focus on the use of longitudinal speed as the blending parameter, with a formal procedure to tune and select its parameters still lacking. This work presents a novel approach based on lateral accelerations, along with a formal procedure and criteria to tune and select blending parameters, for its use on model-based predictive controllers for autonomous driving. An electric passenger bus traveling at different speeds over urban routes is proposed as a case study. Results demonstrate that the lateral acceleration, which is proportional to the lateral forces that differentiate kinematic and dynamic models, is a more appropriate model-switching enabler than the currently used longitudinal velocity. Moreover, the advanced procedure to define blending parameters is shown to be effective. Finally, a smooth blending method offers better tracking results versus sudden model switching ones and non-blending techniques.
TECNALIA Publications
Publication Artículo científico (JournalArticle)

Urban Motion Planning Framework Based on N-Bézier Curves Considering Comfort and Safety

  • Lattarulo, Ray
  • González, Leonardo
  • Martí, Enrique
  • Matute, José
  • Marcano, Mauricio
  • Pérez, Joshue
In last decades, great technology advances have been done related to the automotive sector, especially in Advanced Driver Assistance Systems (ADAS) developed to improve mobility in terms of comfort and safety during driving process; hence, automated driving is presented as an evolution of those systems in the present and upcoming years. The aim of this work is to present a complete framework of motion planning for automated vehicles, considering different constraints with parametric curves for lateral and longitudinal planners. Parametric Bézier curves are used as the core approach for trajectory design in intersections, roundabouts, and lane change maneuvers. Additionally, a speed planner algorithm is presented using the same parametric curve approach, considering comfort and safety. A simulation environment is used for testing the planning method in urban conditions. Finally, tests with the real platform in automated mode have been performed showing goods results.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Fail-aware LIDAR-based odometry for autonomous vehicles

  • García Daza, Iván|||0000-0001-8940-6434
  • Rentero Alonso de Linaje, Mónica|||0000-0002-5543-3247
  • Salinas Maldonado, Carlota|||0000-0003-2330-1001
  • Izquierdo Gonzalo, Rubén|||0000-0002-6722-3036
  • Hernández Parra, Noelia|||0000-0002-6644-9498
  • Ballardini, Augusto Luis|||0000-0001-6688-5081
  • Fernández Llorca, David|||0000-0003-2433-7110
Autonomous driving systems are set to become a reality in transport systems and, so, maximum acceptance is being sought among users. Currently, the most advanced architectures require driver intervention when functional system failures or critical sensor operations take place, presenting problems related to driver state, distractions, fatigue, and other factors that prevent safe control. Therefore, this work presents a redundant, accurate, robust, and scalable LiDAR odometry system with fail-aware system features that can allow other systems to perform a safe stop manoeuvre without driver mediation. All odometry systems have drift error, making it difficult to use them for localisation tasks over extended periods. For this reason, the paper presents an accurate LiDAR odometry system with a fail-aware indicator. This indicator estimates a time window in which the system manages the localisation tasks appropriately. The odometry error is minimised by applying a dynamic 6-DoF model and fusing measures based on the Iterative Closest Points (ICP), environment feature extraction, and Singular Value Decomposition (SVD) methods. The obtained results are promising for two reasons: First, in the KITTI odometry data set, the ranking achieved by the proposed method is twelfth, considering only LiDAR-based methods, where its translation and rotation errors are 1.00% and 0.0041 deg/m, respectively. Second, the encouraging results of the fail-aware indicator demonstrate the safety of the proposed LiDAR odometry system. The results depict that, in order to achieve an accurate odometry system, complex models and measurement fusion techniques must be used to improve its behaviour. Furthermore, if an odometry system is to be used for redundant localisation features, it must integrate a fail-aware indicator for use in a safe manner., Universidad de Alcalá, Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Simple baseline for vehicle pose estimation: experimental validation

  • Corrales Sánchez, Héctor|||0000-0003-0240-0246
  • Hernández Martínez, Antonio|||0000-0001-5722-1531
  • Izquierdo Gonzalo, Rubén|||0000-0002-6722-3036
  • Hernández Parra, Noelia|||0000-0002-6644-9498
  • Parra Alonso, Ignacio|||0000-0002-3889-018X
  • Fernández Llorca, David|||0000-0003-2433-7110
Significant progress on human and vehicle pose estimation has been achieved in recent years. The performance of these methods has evolved from poor to remarkable in just a couple of years. This improvement has been obtained from increasingly complex architectures. In this paper, we explore the applicability of simple baseline methods by adding a few deconvolutional layers on a backbone network to estimate heat maps that correspond to the vehicle keypoints. This approach has been proven to be very effective for human pose estimation. The results are analyzed on the PASCAL3DC dataset, achieving state-of-the-art results. In addition, a set of experiments has been conducted to study current shortcomings in vehicle keypoints labelling, which adversely affect performance. A new strategy for de ning vehicle keypoints is presented and validated with our customized dataset with extended keypoints., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Economía y Competitividad, European Commission
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

A Fail-Operational Control Architecture Approach and Dead-Reckoning Strategy in Case of Positioning Failures

  • Matute Peaspán, José Angel
  • Pérez Rastelli, Joshue Manuel
  • Zubizarreta Pico, Asier
[EN] Presently, in the event of a failure in Automated Driving Systems, control architectures rely on hardware redundancies over software solutions to assure reliability or wait for human interaction in takeover requests to achieve a minimal risk condition. As user confidence and final acceptance of this novel technology are strongly related to enabling safe states, automated fall-back strategies must be assured as a response to failures while the system is performing a dynamic driving task. In this work, a fail-operational control architecture approach and dead-reckoning strategy in case of positioning failures are developed and presented. A fail-operational system is capable of detecting failures in the last available positioning source, warning the decision stage to set up a fall-back strategy and planning a new trajectory in real time. The surrounding objects and road borders are considered during the vehicle motion control after failure, to avoid collisions and lane-keeping purposes. A case study based on a realistic urban scenario is simulated for testing and system verification. It shows that the proposed approach always bears in mind both the passenger’s safety and comfort during the fall-back maneuvering execution., This research was funded by AutoDrive within the Electronic Components and Systems for European Leadership Joint Undertaking (ECSEL JU) in collaboration with the European Union’s H2020 Framework Programme (H2020/2014-2020) and National Authorities, under grant agreement number 737469.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Lateral-Acceleration-Based Vehicle-Models-Blending for Automated Driving Controllers

  • Matute Peaspán, José Angel
  • Marcano Sandoval, Mauricio
  • Díaz, Sergio
  • Zubizarreta Pico, Asier
  • Pérez Rastelli, Joshue Manuel
settings Open AccessArticle Lateral-Acceleration-Based Vehicle-Models-Blending for Automated Driving Controllers by Jose A. Matute-Peaspan 1,2,* [OrcID] , Mauricio Marcano 1,2 [OrcID] , Sergio Diaz 1 [OrcID] , Asier Zubizarreta 2 [OrcID] and Joshue Perez 1 [OrcID] 1 TECNALIA, Basque Research and Technology Alliance (BRTA), 48160 Derio, Spain 2 Department of Automatic Control and Systems Engineering, University of the Basque Country (UPV/EHU), 48013 Bilbao, Spain * Author to whom correspondence should be addressed. Electronics 2020, 9(10), 1674; https://doi.org/10.3390/electronics9101674 Received: 4 September 2020 / Revised: 26 September 2020 / Accepted: 8 October 2020 / Published: 13 October 2020 (This article belongs to the Special Issue Autonomous Vehicles Technology) Download PDF Browse Figures Review Reports Abstract Model-based trajectory tracking has become a widely used technique for automated driving system applications. A critical design decision is the proper selection of a vehicle model that achieves the best trade-off between real-time capability and robustness. Blending different types of vehicle models is a recent practice to increase the operating range of model-based trajectory tracking control applications. However, current approaches focus on the use of longitudinal speed as the blending parameter, with a formal procedure to tune and select its parameters still lacking. This work presents a novel approach based on lateral accelerations, along with a formal procedure and criteria to tune and select blending parameters, for its use on model-based predictive controllers for autonomous driving. An electric passenger bus traveling at different speeds over urban routes is proposed as a case study. Results demonstrate that the lateral acceleration, which is proportional to the lateral forces that differentiate kinematic and dynamic models, is a more appropriate model-switching enabler than the currently used longitudinal velocity. Moreover, the advanced procedure to define blending parameters is shown to be effective. Finally, a smooth blending method offers better tracking results versus sudden model switching ones and non-blending techniques., This research was funded by AUTODRIVE within the Electronic Components and Systems for European Leadership Joint Undertaking (ECSEL JU) in collaboration with the European Union’s H2020 Framework Program (H2020/2014-2020) and National Authorities, under Grant No. 737469.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

A Vehicle Simulation Model and Automated Driving Features Validation for Low-Speed High Automation Applications

  • Matute Peaspán, José Angel
  • Zubizarreta Pico, Asier
  • Díaz Briceno, Sergio Enrique
[EN]The low-speed high automation (LSHA) is foreseen as a development path for new types of mobility, improving road safety and addressing transit problems in urban infrastructures. As these automation approaches are still in the development phase, methods to improve their design and validation are required. The use of vehicle simulation models allows reducing significantly the time deployment on real test tracks, which would not consider all the scenarios or complexity related to automated driving features. However, to ensure safety and accuracy while evaluating the proper operation of LSHA features, adequate validation methodologies are mandatory. In this study a two-step validation methodology is proposed: Firstly, an open-loop test set attempts to tune the required vehicle simulation models using experimental data considering also the dynamics of the actuation devices required for vehicle automation. Secondly, a closed-loop test strives to validate the selected automated driving functionality based on test plans, also improving the vehicle dynamics response. To illustrate the methodology, a study case is proposed using an automated Renault Twizy. In the first step, the brake pedal and steering wheel actuators' behavior is modeled, as well as its longitudinal dynamics and turning capacity. Then, in a second step, an LSHA functionality for Traffic Jam Assist based on a Model Predictive Control approach is evaluated and validated. Results demonstrate that the proposed methodology is capable not only to tune vehicle simulation models for automated driving development purposes but also to validate LSHA functionalities., This work was supported by the Tecnalia Research & Innovation facilities from the Electronic Component Systems for European Leadership Joint Undertaking (AutoDrive Project) under Grant 737469. The Associate Editor for this article was L. Chen.