Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Methodological Framework for Designing Personalised Training Programs to Support Personnel Upskilling in Industry 5.0

  • Fraile Gil, Francisco|||0000-0002-3275-7740
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Linares-Pellicer, Jordi|||0000-0002-3315-1716
  • Psarommatis, Foivos
[EN] Industry 5.0 emphasises social sustainability and highlights the critical need for personnel upskilling and reskilling to achieve the seamless integration of human expertise and advanced technology. This paper presents a methodological framework for designing personalised training programs that support personnel upskilling, with the goal of fostering flexibility and resilience amid rapid changes in the industrial landscape. The proposed framework encompasses seven stages: (1) Integration with Existing Systems, (2) Data Collection, (3) Data Preparation, (4) Skills-Models Extraction, (5) Assessment of Skills and Qualifications, (6) Recommendations for Training Program, (7) Evaluation and Continuous Improvement. By leveraging Large Language Models (LLMs) and human-centric principles, our methodology enables the creation of tailored training programs to help organisations promote a culture of proactive learning. This work thus contributes to the sustainable development of the human workforce, facilitating access to high-quality training and fostering personnel well-being and satisfaction. Through a food-processing use case, this paper demonstrates how this methodology can help organisations identify skill gaps and upskilling opportunities and use these insights to drive personnel upskilling in Industry 5.0., The presented work was partially supported by the projects i4Q, TALON, EU H2020 projects under grant agreements No 958205, 101070181 accordingly. The paper reflects the authors' views, and the Commission is not responsible for any use that may be made of the information it contains.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Matheuristic Algorithm for Job-Shop Scheduling Problem Using a Disjunctive Mathematical Model

  • Guzmán-Ortiz, Brunnel Eduardo
  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
[EN] This paper focuses on the investigation of a new efficient method for solving machine scheduling and sequencing problems. The complexity of production systems significantly affects companies, especially small- and medium-sized enterprises (SMEs), which need to reduce costs and, at the same time, become more competitive and increase their productivity by optimizing their production processes to make manufacturing processes more efficient. From a mathematical point of view, most real-world machine scheduling and sequencing problems are classified as NP-hard problems. Different algorithms have been developed to solve scheduling and sequencing problems in the last few decades. Thus, heuristic and metaheuristic techniques are widely used, as are commercial solvers. In this paper, we propose a matheuristic algorithm to optimize the job-shop problem which combines a genetic algorithm with a disjunctive mathematical model, and the Coin-OR Branch & Cut open-source solver is employed. The matheuristic algorithm allows efficient solutions to be found, and cuts computational times by using an open-source solver combined with a genetic algorithm. This provides companies with an easy-to-use tool and does not incur costs associated with expensive commercial software licenses., The research leading to these results received funding from the European Union H2020 Program with grant agreements No. 825631 "Zero-Defect Manufacturing Platform (ZDMP)" and No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)". This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and the European Social Fund with the Grant Operational Programme of FSE 2014 2020, the Valencian Community (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Smart manufacturing scheduling: A literature review

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Within the scheduling framework, the potential of digital twin (DT) technology, based on virtualisation and intelligent algorithms to simulate and optimise manufacturing, enables an interaction with processes and modifies their course of action in time synchrony in the event of disruptive events. This is a valuable capability for automating scheduling and confers it autonomy. Automatic and autonomous scheduling management can be encouraged by promoting the elimination of disruptions due to the appearance of defects, regardless of their origin. Hence the zero-defect manufacturing (ZDM) management model oriented towards zero-disturbance and zero-disruption objectives has barely been studied. Both strategies combine the optimisation of production processes by implementing DTs and promoting ZDM objectives to facilitate the modelling of automatic and autonomous scheduling systems. In this context, this particular vision of the scheduling process is called smart manufacturing scheduling (SMS). The aim of this paper is to review the existing scientific literature on the scheduling problem that considers the DT technology approach and the ZDM model to achieve self-management and reduce or eliminate the need for human intervention. Specifically, 68 research articles were identified and analysed. The main results of this paper are to: (i) find methodological trends to approach SMS models, where three trends were identified; i.e. using DT technology and the ZDM model, utilising other enabling digital technologies and incorporating inherent SMS capabilities into scheduling; (ii) present the main SMS alignment axes of each methodological trend; (iii) provide a map to classify the literature that comes the closest to the SMS concept; (iv) discuss the main findings and research gaps identified by this study. Finally, managerial implications and opportunities for further research are identified., This work was supported by the Spanish Ministry of Science, Innovation and Universities project entitled 'Optimisation of zero-defects production technologies enabling supply chains 4.0 (CADS4.0) ' (RTI2018-101344-B-I00) , the European Union H2020 research and innovation programme with grant agreement No. 825631 "Zero Defect Manufacturing Platform (ZDMP) " and the European Union H2020 research and innovation programme with agreement No. 958205 "In-dustrial Data Services for Quality Control in Smart Manufacturing (i4Q) ".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Digital twin for supply chain master planning in zero-defect manufacturing

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Recently, many novel paradigms, concepts and technologies, which lay the foundation for the new revolution in manufacturing environments, have emerged and make it faster to address critical decisions today in supply chain 4.0 (SC4.0), with flexibility, resilience, sustainability and quality criteria. The current power of computational resources enables intelligent optimisation algorithms to process manufacturing data in such a way, that simulating supply chain (SC) planning performance in real time is now possible, which allows relevant information to be acquired so that SC nodes are digitally interconnected. This paper proposes a conceptual framework based on a digital twin (DT) to model, optimise and prescribe a SC¿s master production schedule (MPS) in a zero-defect environment. The proposed production technologies focus on the scientific development and resolution of new models and optimisation algorithms for the MPS problem in SC4.0., The research leading to these results received funding from the EuropeanUnion H2020 Program with grant agreement No. 825631 Zero Defect Manufacturing Platform(ZDMP) and with grant agreement No. 958205 Industrial Data Services for Quality Control inSmart Manufacturing (i4Q) and from the Spanish Ministry of Science, Innovation and Universities under grant agreement RTI2018-101344-B-I00 Optimisation of zero-defects productiontechnologies enabling supply chains 4.0 (CADS4.0).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Relational network of innovation ecosystems generated by digital innovation hubs: a conceptual framework for the interaction processes of DIHs from the perspective of collaboration within and between their relationship levels

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Ferreira, José
  • Jardim-Goncalves, R.
[EN] Collaboration plays a key role in the success attained to date by networks of innovation ecosystems generated around entities known as Digital Innovation Hubs (DIHs), recently created following European Commission initiatives to boost the digitisation of the European economic fabric. This article proposes a conceptual framework that brings together, defines, structures and relates the concepts involved in the collaborative interaction processes within and between these innovation ecosystems to allow comprehensive conceptualisation. The developed framework also provides an approach that helps to tangibilise collaboration as a management process. Here the goal is to ultimately move towards not only qualitative, but also quantitative modelling to bridge the research gap in the state of the art in this respect. The data-driven business-ecosystem-skills-technology (D-BEST) model, devised to configure DIHs service portfolios in a collaborative context, provides the reference basis for the interorganisational asset transfer methodology (IOATM). This is the keystone that structures the framework and constitutes its main contribution. Through the IOATM, this conceptual framework points out collaboration quantification, and serves as a lever for its modelling to deal with collaboration accounting by: turning it into a more controllable management element; guiding practitioners' efforts to improve collaborative processes efficiency with an approach that pursues objectivity and maximises synergies., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The research leading to these results received funding from the European Union H2020 Research and Innovation Programme with Grant Agreements No. 872548 Fostering DIHs for Embedding Interoperability in Cyber Physical Systems of European SMEs (DIH4CPS), No. 825631 Zero-Defect Manufacturing Platform (ZDMP), and No. 958205 Industrial Data Services for Quality Control in Smart Manufacturing (i4Q) , from the European Union Horizon Europe Programme with Grant Agreement No. 101057294 AI Driven Industrial Equipment Product Life Cycle Boosting Agility, Sustainability and Resilience (AIDEAS), and from the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled Industrial Production and Logistics Optimisation in Industry 4.0 (i4OPT, Ref. PROMETEO/2021/065).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A bottom-up multi-objective optimisation approach to dynamic facility layout planning

  • Pérez-Gosende, Pablo
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] Dynamic facility layout planning (DFLP) involves determining an appropriate arrangement scheme of the elements making up the production system for each time period into which the planning horizon is divided. When formulating the problem as an optimisation model, using the traditional top-down approach is usual, which firstly determines the block layout (BL) and then the detailed layout (DL) of each work cell. However by this approach, the BL generates area constraints in the detailed phase, which sometimes limit its implementation. In this context, the present paper presents a multi-objective mixed integer non-linear programming (MOMINLP) model that allows the problem to be addressed by considering an alternative approach, known in the literature as the bottom-up approach. The proposed model, called bottom-up mDFLP, considers three objective functions: (1) minimise the total material handling cost (TMHC) and the total rearrangement cost (TRAC); (2) maximise the total closeness rating (TCR) between departments; (3) maximise the area utilisation ratio (AUR). The original MOMINLP is transformed into a more computationally efficient multi-objective mixed integer linear programming (MOMILP) model. The proposed model is applied and validated in a case study of a company in the metal-mechanic sector with 12 departments for three 4-month periods., The research leading to these results received funding from the European Union H2020 Program with grant agreement no. 958205 Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)' and from the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled Industrial Production and Logistics Optimization in Industry 4.0' (i4OPT) (Ref. PROMETEO/2021/065) and Resilient, Sustainable and People-Oriented Supply Chain 5.0 Optimization Using Hybrid Intelligence' (RESPECT) (Ref. CIGE/2021/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Job shop smart manufacturing scheduling by deep reinforcement learning

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Smart manufacturing scheduling (SMS) requires a high degree of flexibility to successfully cope with changes in operational decision level planning processes in today's production environments, which are usually subject to high uncertainty. In such a unique and complex scenario as the real job shop, the modelling of SMS as a Markov decision process (MDP), and its approach by deep reinforcement learning (DRL), is a research field of growing interest given its characteristics. It allows us to consider achieving high flexibility levels by promoting process automation, autonomy in decision making, and the ability to act in real time when faced with disturbances and disruptions in a highly dynamic environment. This paper addresses the problem of scheduling a quasi-realistic job shop environment characterised by machines receiving jobs from buffers that accumulate numerous jobs using a wide variety of parts and multimachine routes with a diverse number of operation phases by developing a digital twin of the job shop based on a MDP with the DRL methodology. This is approached by: modelling the job shop scheduling environment with OpenAI Gym; designing an observation space with 18 job features; designing an action space composed of three priority heuristic rules; shaping a single reward function with a multi-objective characteristic; using the implementation of the proximal policy optimisation (PPO) algorithm from the Stable Baselines 3 library. This modelling approach, dubbed as job shop smart manufacturing scheduling (JS-SMS), is characterised by deterministic formulation and implementation. The model is subjected to validation by comparing it to several of the best-known heuristic priority rules. The main findings of this methodology allow to replicate, to a great extent, the positive aspects of heuristic rules and to mitigate the negative ones, which achieves more balanced behaviour in most of the measures established as performance indicators and outperforms heuristic rules from this multi-objective perspective. Finally, further research is oriented to dynamic and stochastic approaches to address the job shop reality in an Industry 4.0 context., The research leading to these results received funding from the following projects: "Industrial Production and Logistics Optimization in Industry 4.0″ (i4OPT) (Ref. PROMETEO/2021/065) granted by the Valencian Regional Government; CADS4.0-II (PDC2022 133957-I00) funded by MCIN/AEI /10.13039/501100011033 and by European Union Next GenerationEU/PRTR; the EU H2020 research and innovation programme with grant number 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)" and from the European Union Horizon Europe program with grant agreement No. 101057294 AI Driven Industrial Equipment Product Life Cycle Boosting Agility, Sustainability and Resilience (AIDEAS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

DELTA: A Modular, Transparent, and Efficient Synchronization of DLTs and Databases

  • Fernández-Bravo Peñuela, F. Javier
  • Arjona Aroca, Jordi
  • Yatsyk Gavrylyak, Yuriy
  • Illán García, Ismael
  • Muñoz-Escoí, Francesc D.|||0000-0002-7216-9249
  • Bernabeu Aubán, José Manuel|||0000-0001-5253-0626
[EN] Besides cryptocurrencies, DLTs may be also exploited in enterprise systems operated by a consortium of organizations. Their interaction takes usually place on a permissioned blockchain network that holds a set of data to be queried frequently. In this scope, the main problem of DLTs is their unsuitability for a fast service of complex queries on those data. In order to solve this issue, many proposals dump the ledger contents onto databases that, because of their own goals and design, are already optimized for the execution of those queries. Unfortunately, many of those proposals assume that the data to be queried consist in only a block or (cryptocurrency-related) transaction history. However, those organization consortiums commonly store other structured business-related information in the DLT, and there is an evident lack of support for querying that other kind of structured data. To remedy those problems, DELTA synchronizes, with minimal overhead, the DLT state into a database, providing (1) a modular architecture with event-based handling of DLT updates that supports different DLTs and databases, (2) a transparent management, since DLT end users do not need to learn or use any new API in order to handle that synchronization (i.e., those users still rely on the original interface provided by their chosen DLT), (3) the efficient execution of complex queries on those structured data. Thus, DELTA reduces query times up to five orders of magnitude, depending on the DLT and the database, compared to queries directed to the ledger nodes.; DELTA synchronizes, with minimal overhead, the state of a DLT into a database. Its modular architecture supports multiple DLTs and databases, providing a transparent management of them. Hence, the users are enabled to efficiently execute complex queries on the ledger data, expressed in the language of the chosen database. image, This research was supported by the i4Q project that has received funding from the European Union's Horizon 2020 Research and Innovation Programme, under Grant Agreement No. 958205.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Smart Quality in CNC Machining

  • Rizzi, Angelo
  • Paraschos, Spyridon
  • Silveira, Diego
  • Mateo-Casalí, Miguel Ángel|||0000-0001-5086-9378
[EN] In the mold and die industry, goods are produced by milling, a machining process that involves removing material from a workpiece using a rotating cutter to produce complex components. This removal process is semi-automatic and controlled by a computer (CNC) whose actions are controlled by settings chosen by human operator. A wrong parameter selection will result in the bad behavior of a machine, causing vibrations and bad quality of the produced part, requiring manual finishing operations to achieve the required surface roughness. This paper describes the conception, implementation and usage of AI solutions provided by European Project i4Q (Grant Agreement number: 958205 ¿ H2020-NMBP-TR-IND-2018-2020 / H2020-NMBP-TR-IND-2020) to control and optimize the machining process., This paper is supported by European Union's Horizon 2020 research and innovation programme under grant agreement No 958205, project i4Q (Industrial Data Services for Quality Control in Smart Manufacturing).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Implementing Industry 4.0 principles

  • Cañas, Héctor
  • Campuzano-Bolarín, Francisco
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] This article identifies the advances, advantages, limitations, requirements and current methodologies in implementing the strategic Industry 4.0 (I4.0) initiative. It focuses on all research works mainly on production planning. To do so, it proposes a taxonomy of the principles of I4.0 design terms that contemplates the following classification aspects: interconnection/connectivity, decentralised decision making, technical assistance, the human factor, intelligence/awareness, interoperability, information transparency, technology, organisation, conceptual frameworks and production planning. It also presents the models, algorithms, heuristics and metaheuristics of the components used in relation to an I4.0 setting. Finally, a considerable number of reference conceptual frameworks is analysed, which allow the term I4.0 to be defined., This work was supported by the Spanish Ministry of Science, Innovation and Universities project entitled 'Optimisation of zero-defects production technologies enabling supply chains 4.0 (CADS4.0)' (RTI2018-101344-B-I00) and the European Union H2020 Program under grant agreement No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Predictive Maintenance for CNC Machines: Empowering Operators with Real-Time Insights

  • Mateo-Casalí, Miguel Ángel|||0000-0001-5086-9378
  • Mateos-Luengo, Javier
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Fraile Gil, Francisco|||0000-0002-3275-7740
[EN] This paper describes a predictive model trained to predict failures of a computer numerical control machine. The model¿s objective is to support the shift from corrective maintenance operations to a preventive strategy where the model alerts operators of potential failures. The model is trained using computer numerical control data and alarm signals to learn situations that can lead to failure. When a possible issue is detected, the operators received a notification message while performing other routine tasks (hourly product quality checks). The aim is to improve process quality, reduce downtime and minimize the defective parts. At the same time, our approach empowers operators with real-time data and predictive insights, enabling them to autonomously perform maintenance tasks and make informed decisions to prevent equipment failures., The research leading to these results received funding from the European Union H2020 programs with grant agreement No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)", and the Horizon Europe Framework Programme (HORIZON) with grant agreement No. 101070181 "Autonomous and Self-organized Artificial Intelligent Orchestra-tor for a Greener Industry 4.0 (TALON)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Toward smart manufacturing scheduling from an ontological approach of job-shop uncertainty sources

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] An integral application of the enabling technologies of Industry 4.0 in the job-shop scheduling problem (JSSP) must contemplate the automation and autonomy of the involved decision-making processes as a goal, which is the main purpose of the smart manufacturing scheduling (SMS) paradigm. In a real production context, uncertainty acts as a barrier that hinders this goal being met and, therefore, any SMS model should integrate uncertainty generators in one way or another. This paper proposes an ontological framework that identifies and structures the entities shaping the joint domain formed by the job-shop scheduling process in its itinerary toward the SMS paradigm, the sources of uncertainty that it faces, and the interrelationship type that link these entities. This ontological framework will serve in future research as a conceptual basis to design new quantitative models that, from a holistic perspective, will address the stochasticity of manufacturing environments and incorporate the management of disturbances into the realtime resolution of automatic and autonomous job-shop scheduling., The research leading to these results received funding from grant RTI2018-101344-B-I00 of MCIN/AEI/10.13039/501100011033 and ¿ERDF A way of making Europe¿, from the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/2021/065)", and from the European Union H2020 programs with grant agreements No. 825631 ¿Zero-Defect Manufacturing Platform (ZDMP)¿, No. 872548 "Fostering DIHs for Embedding Interoperability in Cyber-Physical Systems of European SMEs (DIH4CPS)", and No. 958205 ¿Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of a conceptual model for lean supply chain planning in industry 4.0: multidimensional analysis for operations management

  • Reyes, John
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] A lean supply chain (LSC) is a set of organizations directly linked by upstream and downstream value streams between processes that work collaboratively to reduce costs and waste. Currently, supply chains (SCs) have been put to the test as the world has had to face a series of unprecedented disruptions in demand and supply caused by the COVID-19 pandemic. In this paper, a detailed study of constructs and multistructural components was carried out to develop a conceptual reference model that merges Industry 4.0 (I4.0) digital technologies with lean manufacturing tools to reduce waste and minimize costs in the lean supply chain planning (LSCP) context. The main theoretical contribution of this conceptual proposal is to establish a structured relation among the lean, agile, sustainable, resilient and flexible paradigms to improve SC performance by implementing I4.0 enabling technologies. The proposed conceptual model, dubbed as LSCP 4.0, is applied and validated with a case study in a large footwear company. It can help decision-makers and researchers to improve the planning and management of digital SC production processes, even with unexpected disruptions., The research leading to these results received funding from the European Union H2020 Program 7with Grant Agreement No. [958205] `Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)' and from the Grant RT I2018-101344-B-I00 `Optimisation of zerodefects production technologies enabling supply chains 4.0 (CADS4.0)' funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". It also acknowledges the PhD grant from the Technical University of Ambato.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Industrial Data Services for Quality Control in Industry 4.0

  • Apostolou, Georgia
  • Nowak-Meitinger, Anna M.
  • Mayer, Jan
  • Trevino, Robert
  • Kozhuharova, Denitsa
  • Gialampoukidis, Ilias
  • Vrochidis, Stefanos
  • Kompatsiaris, Yiannis
  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
[EN] This paper addresses the i4Q project vision, including stakeholders¿ requirements and expectations, aiming to present the digital technologies, as well as a multi-dimensional benchmarking instrument that supports the i4Q design and development. It also sets clear specifications that drive the creation of i4Q. It analyses the current systems of the demonstration scenarios, to establish the starting point (Key Performance Indicators¿ (KPIs)) for the implementation of their industrial use cases and to understand how, data reliability and manufacturing quality, are impacted by i4Q. Finally, it focuses on the most suitable KPIs and identifies the most relevant regulation and trustworthy systems for data management in the i4Q Solutions., This work is funded by the European Union's Horizon 2020 research and innovation program under Grant Agreement No: 958205.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reinforcement learning applied to production planning and control

  • Esteso, Ana|||0000-0003-0379-8786
  • Peidro Payá, David|||0000-0001-8678-6881
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] The objective of this paper is to examine the use and applications of reinforcement learning (RL) techniques in the production planning and control (PPC) field addressing the following PPC areas: facility resource planning, capacity planning, purchase and supply management, production scheduling and inventory management. The main RL characteristics, such as method, context, states, actions, reward and highlights, were analysed. The considered number of agents, applications and RL software tools, specifically, programming language, platforms, application programming interfaces and RL frameworks, among others, were identified, and 181 articles were sreviewed. The results showed that RL was applied mainly to production scheduling problems, followed by purchase and supply management. The most revised RL algorithms were model-free and single-agent and were applied to simplified PPC environments. Nevertheless, their results seem to be promising compared to traditional mathematical programming and heuristics/metaheuristics solution methods, and even more so when they incorporate uncertainty or non-linear properties. Finally, RL value-based approaches are the most widely used, specifically Q-learning and its variants and for deep RL, deep Q-networks. In recent years however, the most widely used approach has been the actor-critic method, such as the advantage actor critic, proximal policy optimisation, deep deterministic policy gradient and trust region policy optimisation., The funding for the research work that has led to the obtained results came from the following grants: CADS4.0 (Ref. RTI2018-101344-B-I00) and NIOTOME (Ref. RTI2018102020-B-I00), financed byMCIN/AEI/10.13039/501100011033 and 'ERDF A way of making DEurope'; the EU H2020 research and innovation programme with grant numbers 825631 'Zero-Defect Manufacturing Platform (ZDMP)' and 958205 'Industrial Data Services for Quality Control in SmartManufacturing (i4Q)'; 'Industrial Production and Logistics Optimization in Industry 4.0' (i4OPT) (Ref. PROMETEO/2021/065) and 'Resilient, Sustainable and PeopleOriented Supply Chain 5.0 Optimization Using Hybrid Intelligence' (RESPECT) (Ref. CIGE/2021/159) Projects were funded by the Generalitat Valenciana (Valencian Regional Government).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacturing Line Qualification and Reconfiguration to Improve the Manufacturing Outcomes

  • Nieto, Estela
  • Gomez, Ana
  • Ntemi, Myrsini
  • Nowak-Meitinger, Anna M.
  • Mayer, Jan
  • Trevino, Robert
  • Apostolou, Georgia
  • Gialampoukidis, Ilias
  • Vrochidis, Stefanos
  • Mateo-Casalí, Miguel Ángel|||0000-0001-5086-9378
  • Poler, R.|||0000-0003-4475-6371
[EN] Increased consumerism and the competitiveness of the global market have led to more stringent requirements in terms of product quality and manufacturing lines. The i4Q European project¿s Rapid Manufacturing Line Qualification and Reconfiguration set of solutions aims to develop new and improved strategies and methods for process qualification, process reconfiguration and optimization using existing manufacturing data and intelligent algorithms. The set of solutions provides manufacturing lines¿ diagnosis and prescription, process capacity forecasting, manufacturing line reconfiguration propositions, and data quality certifications and audit procedures. With this information, plant managers can make the required changes to the plant to improve manufacturing products¿ quality, machines¿ life cycle, plants¿ productivity and so on., The research leading to these results is part of the i4Q project that has received funding from the European Union s Horizon 2020 Research and Innovation Programme, under Grant Agreement No 958205.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An industry maturity model for implementing Machine Learning operations in manufacturing

  • Mateo-Casalí, Miguel Ángel|||0000-0001-5086-9378
  • Boza, Andres|||0000-0002-5429-0416
  • Fraile Gil, Francisco
  • Nazarenko, Artem
[EN] The next evolutionary technological step in the industry presumes the automation of the elements found within a factory, which can be accomplished through the extensive introduction of automatons, computers and Internet of Things (IoT) components. All this seeks to streamline, improve, and increase production at the lowest possible cost and avoid any failure in the creation of the product, following a strategy called Zero Defect Manufacturing . Machine Learning Operations (MLOps) provide a ML-based solution to this challenge, promoting the automation of all product-relevant steps, from development to deployment. When integrating different machine learning models within manufacturing operations, it is necessary to understand what functionality is needed and what is expected. This article presents a maturity model that can help companies identify and map their current level of implementation of machine learning models., The research leading to these results received funding from the European Union H2020 programs with grant agreements No. 825631, “Zero-Defect Manufacturing Platform (ZDMP)” and No. 958205, “Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

OR in the industrial engineering of Industry 4.0: experiences from the Iberian Peninsula mirrored in CJOR

  • Mula, Josefa|||0000-0002-8447-3387
  • Bogataj, Marija
[EN] Industry 4.0 (I4.0) implies a group of technologies, organisational concepts and management principles to improve the performance of manufacturing companies or supply chains driven by production cost optimisation, mass customisation requirements, connectivity and digitisation of factories. The purpose of this paper is to relate Iberian Peninsula advances in I4.0 from Spanish and Portuguese research works published in CJOR papers. Hence this paper reviews the Spanish and Portuguese operations research (OR) and industrial engineering-based papers published in CJOR from 2011, when the I4.0 concept emerged, to the present-day. Here 47 papers are reviewed according to classifcation criteria based on the following elements: (1) objectives; (2) application context; (3) modelling approach; (4) development or software tool; (5) I4.0 technologies. The main outcomes, limitations and further research are also identifed for recent papers. Finally, research trends and future directions in industrial engineering, OR and I4.0 are discussed., This work was supported by the Spanish Ministry of Science, Innovation and Universities project entitled 'Optimisation of zero-defects production technologies enabling supply chains 4.0 (CADS4.0)' (RTI2018-101344-B-I00) and the European Union H2020 Program under Grant Agreement No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)". It was also supported by the Slovenian Research Agency (ARRS): P5-0364: The Impact of Corporate Governance, Organizational Learning, and Knowledge Management on Modern Organization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multihop Latency Model for Industrial Wireless Sensor Networks Based on Interfering Nodes

  • Vera-Pérez, Jose
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
  • Cuesta Frau, David|||0000-0002-0076-0515
[EN] Emerging Industry 4.0 applications require ever-increasing amounts of data and new sources of information to more accurately characterize the different processes of a production line. Industrial Internet of Things (IIoT) technologies, and in particular Wireless Sensor Networks (WSNs), allow a large amount of data to be digitized at a low energy cost, thanks to their easy scalability and the creation of meshed networks to cover larger areas. In industry, data acquisition systems must meet certain reliability and robustness requirements, since other systems such as predictive maintenance or the digital twin, which represents a virtual mapping of the system with which to interact without the need to alter the actual installation, may depend on it. Thanks to the IEEE 802.15.4e standard and the use of Time-Slotted Channel Hopping (TSCH) as the medium access mechanism and IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) as the routing protocol, it is possible to deploy WSNs with high reliability, autonomy, and minimal need for re-configuration. One of the drawbacks of this communication architecture is the low efficiency of its deployment process, during which it may take a long time to synchronize and connect all the devices in a network. This paper proposes an analytical model to characterize the process for the creation of downstream routes in RPL, whose transmission of multi-hop messages can present complications in scenarios with a multitude of interfering nodes and resource allocation based on minimal IPv6 over the TSCH mode of IEEE 802.15.4e (6TiSCH). This type of multi-hop message exchange has a different behaviour than the multicast control messages exchanged during the synchronization phase and the formation of upstream routes, since the number of interfering nodes changes in each retransmission., The research leading to these results is part of the i4Q project that has received funding from the European Union's Horizon 2020 Research and Innovation Programme, under Grant Agreement No. 958205.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Normalised data model for cloud collaborative manufacturing: applied to the footwear industry

  • Reyes-Vasquez, John
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
  • Andres, B.|||0000-0002-7920-7711
[EN] Currently, collaborative SC planning driven by lean Industry 4.0 technologies is helping manufacturers to be more agile and efficient in their operations. This paper addresses the problem of information sharing among supply network partners in the footwear industry for the computational optimisation of SC planning. Themethodology calledC2NET is used for model input data through standardised tables (STables). The results show a simplified database relational diagram, which can be applied by different companies from this industrial sector, as well as researchers for their mathematical optimisation developments., The research that has led to the present results has received funding from: the European Union H2020 Programme, with grant agreement No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)"; the MCIN/AEI/10.13039/501100011033 and by European Union Next GenerationEU/PRTR with grant agreement PDC2022-133957-I00); the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana, entitled "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/2021/065); 'Resilient, Sustainable and People-Oriented Supply Chain 5.0 Optimization Using Hybrid Intelligence' (RESPECT) (Ref. CIGE/2021/159); a PhD grant from the Technical of Ambato University.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Quantitative insights into the integrated push and pull production problem for lean supply chain planning 4.0

  • Reyes, John
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] Validated quantitative models for lean supply chain planning (LSCP) are still scarce in the literature, particularly because conventional push systems have not been widely integrated and tested with pull systems in sustainable and resilient environments in the Industry 4.0 context. Hence the main contribution of this paper is to develop an optimisation model that is able to contribute to the LSCP with the combination of push and pull strategies. Here we present an integrated just-in-time (JIT) production system with material requirement planning (MRP) for a SC that takes a traditional five level structure based on a mixed-integer linear programming model (MILP) dubbed as LSCP 4.0.The model is able to simultaneously plan the production and inventory of materials and finished goods to satisfy demand from forecasts and firm orders. The selection of alternative suppliers as a proactive measure to face disruptive events is also considered. Furthermore, sustainable practices are included in the objective function for profit maximisation by considering CO2 emissions. This proposal is tested in the footwear sector. The results demonstrate that the combined use of JIT and MRP through a quantitative approach improve performance in leanness, sustainability and resilience by decreasing the bullwhip effect at different SC levels., This work was supported by Generalitat Valenciana [grant numbers: PROMETEO/2021/065 and CIGE/2021/159]; Horizon2020 Framework Programme [grant number 958205]; the MCIN/AEI/10.13039/501100011033 and by European Union Next GenerationEU/PRTR [grant number PDC2022-133957-I00]; and Universidad Tecnica de Ambato.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A conceptual framework for multi-objective facility layout planning by a bottom-up approach

  • Pérez-Gosende, Pablo
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] The purpose of this paper is to present a conceptual framework to facilitate academics and practitioners decision making related to multi-objective facility layout planning (mFLP) by employing a bottom-up approach. Based on a literature survey framed in the mFLP context, this work identified and discussed a set of criteria that have become limitations of the traditional top-down approach. These criteria served as the basis to conceive the proposed conceptual framework. Our conceptual framework formalises FLP as a multi-objective problem by following the two traditional planning phases (block- and detailed phase) in reverse by a bottom-up approach, and by also integrating a third phase, called the refined phase, which has not previously been contemplated in the literature. Apart from identifying the inputs and outputs of each phase, the conceptual framework groups together several objectives related to mFLP that have been recently considered in the literature and formalises and contextualises them according to the planning phase in which they are involved. This is the first time that mFLP is addressed with a bottom-up approach., The research leading to these results received funding from the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled “Industrial Production and Logistics Optimization in Industry 4.0” (i4OPT) (Ref. PROMETEO/2021/065)”, and from the European Union H2020 programmes with grant agreements No. 825631 “Zero-Defect Manufacturing Platform (ZDMP)” and No. 958205 “Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A conceptual framework for smart production planning and control in Industry 4.0

  • Cañas, Héctor
  • Campuzano-Bolarín, Francisco
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] This article aims to introduce the challenge (i.e., integration of new collaborative models and tools) posed by the automation and collaboration of industrial processes in Industry 4.0 (I4.0) smart factories. Small- and medium-sized enterprises (SMEs) are particularly confronted with new technological and organisational changes, but a conceptual framework for production planning and control (PPC) systems in the I4.0 context is lacking. The main contributions of this article are to: (i) identify the functions making up traditional PPC and smart production planning and control in I4.0 (SPPC 4.0); (ii) analyse the impact of I4.0 technologies on PPC systems; (iii) propose a conceptual framework that provides the systematic structuring of how a PPC system operates in the I4.0 context, dubbed SPPC 4.0. Thus SPPC 4.0 is proposed by adopting the axes of the RAMI 4.0 reference architecture model, which compiles and contains the main concepts of PPC systems and I4.0. It also provides the technical description, organisation and understanding of each aspect, which can provide a guide for academic research and industrial practitioners to transform PPC systems towards I4.0 implementations. Finally, theoretical implications and research gaps are provided., The research leading to these results received funding from the European Union H2020 Program with grant agreements No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)" and No. 825631 "Zero-Defect Manufacturing Platform (ZDMP)"; the "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/2021/065) project granted by the Valencian Regional Government; and the PAI-12-21 open-access support from the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Facility layout planning. An extended literature review

  • Pérez-Gosende, Pablo
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] Facility layout planning (FLP) involves a set of design problems related to the arrangement of the elements that shape industrial production systems in a physical space. The fact that they are considered one of the most important design decisions as part of business operation strategies, and their proven repercussion on production systems' operation costs, efficiency and productivity, mean that this theme has been widely addressed in science. In this context, the present article offers a scientific literature review about FLP from the operations management perspective. The 232 reviewed articles were classified as a large taxonomy based on type of problem, approach and planning stage and characteristics of production facilities by configuring the material handling system and methods to generate and assess layout alternatives. We stress that the generation of layout alternatives was done mainly using mathematical optimisation models, specifically discrete quadratic programming models for similar sized departments, or continuous linear and non-linear mixed integer programming models for different sized departments. Other approaches followed to generate layout alternatives were expert's knowledge and specialised software packages. Generally speaking, the most frequent solution algorithms were metaheuristics., The research leading to these results received funding from the European Union H2020 Program under grant agreement No 958205 `Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)'and from the Spanish Ministry of Science, Innovation and Universities under grant agreement RTI2018-101344-B-I00 `Optimisation of zerodefectsproduction technologies enabling supply chains 4.0 (CADS4.0)'
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Data Interoperability in Collaborative Industry 4.0 European Projects

  • Mateo-Casalí, Miguel Ángel|||0000-0001-5086-9378
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Fraile Gil, Francisco|||0000-0002-3275-7740
  • Poler, R.|||0000-0003-4475-6371
[EN] Industry 4.0 is a paradigm shift in manufacturing that integrates advanced technologies, such as the Internet of Things (IoT), cloud computing and artificial intelligence, to create smart factories. Collaboration is a critical element of Industry 4.0 projects, as it involves different organisations working together to achieve a common goal. In recent years, the common goal for such projects has been the development of technology and applications that generate added value for the participating companies and can then be used in the industry. Data interoperability is essential in collaborative Industry 4.0 projects, allowing organisations to share and exchange data without errors. This article discusses the importance of data interoperability in European collaborative projects in the context of Industry 4.0, analysing its benefits, challenges, and recommendations and providing a methodology to follow., The research leading to these results received funding from the European Union H2020 programs with grant agreement No. 958205 Industrial Data Services for Quality Control in Smart Manufacturing (i4Q) , and the Horizon Europe Framework Programme (HORIZON) with grant agreement No. 101070181 Autonomous and Self-organized Artificial Intelligent Orchestrator for a Greener Industry 4.0 (TALON) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transforming Quality Control in Manufacturing: An In-Depth Exploration of i4Q Solutions in the FACTOR Pilot Project

  • Mateo-Casalí, Miguel Ángel|||0000-0001-5086-9378
  • Poler, R.|||0000-0003-4475-6371
  • Rocamora, Pablo
  • Giménez, Alfredo
  • Gómez González, Ana
  • Martín, Héctor
  • Mandler, Benjamin
  • García, Arcadio
[EN] A far-reaching initiative is underway within the European Industrial Data Services for Quality Control in Smart Manufacturing (i4Q) project. This project creates 22 software solutions with the objective of improving the manufacturing process using data and Artificial Intelligence (AI). These solutions are designed to streamline manufacturing processes, emphasizing the fundamental aspects of quality assurance, operational efficiency, and seamless collaboration between manufacturing companies. The practical application of these solutions will be developed in manufacturing environments, allowing them to be tested and proven with accurate Pilot data. One of these pilots is Factor, a manufacturing company dedicated to metal machining and precision turning. This paper covers (i) the introduction of the pilot business process and the project solutions; (ii) the goal that i4Q aims to achieve by the implementation of some of the solutions in Factor; (iii) information on the factory's current Key Performance Indicators after the introduction of the solutions., The research leading to these results is part of the i4Q project that has received funding from the European Union s Horizon 2020 Research and Innovation Programme, under Grant Agreement No 958205.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A matheuristic approach combining genetic algorithm and mixed integer linear programming model for production and distribution planning in the supply chain

  • Guzmán-Ortiz, Brunnel Eduardo
  • Poler, R.|||0000-0003-4475-6371
  • Andres, B.|||0000-0002-7920-7711
[EN] A number of research studies has addressed supply chain planning from various perspectives (strategical, tactical, operational) and demonstrated the advantages of integrating both production and distribution planning (PDP). The globalisation of supply chains and the fourth industrial revolution (Industry 4.0) mean that companies must be more agile and resilient to adapt to volatile demand, and to improve their relation with customers and suppliers. Hence the growing interest in coordinating production-distribution processes in supply chains. To deal with the new market¿s requirements and to adapt business processes to industry¿s regulations and changing conditions, more efforts should be made towards new methods that optimise PDP processes. This paper proposes a matheuristic approach for solving the PDP problem. Given the complexity of this problem, combining a genetic algorithm and a mixed integer linear programming model is proposed. The matheuristic algorithm was tested using the Coin-OR Branch & Cut open-source solver. The computational outcomes revealed that the presented matheuristic algorithm may be used to solve real sized problems., This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte - Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and European Social Fund with Grant Operational Program of FSE 2014-2020, the Valencian Community. The research leading to these results received funding from the European Union H2020 Programme with grant agreement No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing" (i4Q) and the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/ 2021/065)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A decision-making tool for algorithm selection based on a fuzzy TOPSIS approach to solve replenishment, production and distribution planning problems

  • Guzmán-Ortiz, Brunnel Eduardo
  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
[EN] A wide variety of methods and techniques with multiple characteristics are used in solving replenishment, production and distribution planning problems. Selecting a solution method (either a solver or an algorithm) when attempting to solve an optimization problem involves considerable difficulty. Identifying the best solution method among the many available ones is a complex activity that depends partly on human experts or a random trial-and-error procedure. This paper addresses the challenge of recommending a solution method for replenishment, production and distribution planning problems by proposing a decision-making tool for algorithm selection based on the fuzzy TOPSIS approach. This approach considers a collection of the different most commonly used solution methods in the literature, including distinct types of algorithms and solvers. To evaluate a solution method, 13 criteria were defined that all address several important dimensions when solving a planning problem, such as the computational difficulty, scheduling knowledge, mathematical knowledge, algorithm knowledge, mathematical modeling software knowledge and expected computational performance of the solution methods. An illustrative example is provided to demonstrate how planners apply the approach to select a solution method. A sensitivity analysis is also performed to examine the effect of decision maker biases on criteria ratings and how it may affect the final selection. The outcome of the approach provides planners with an effective and systematic decision support tool to follow the process of selecting a solution method., The research leading to these results received funding from the European Union H2020 Programme with grant agreements No. 825631 "Zero-Defect Manufacturing Platform (ZDMP)" and No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)" and from the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana with Ref. PROMETEO/2021/065 "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT). This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte¿Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and the European Social Fund with the Grant Operational Programme of FSE 2014- 2020, the Valencian Community (Spain). Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Smart Master Production Schedule for the Supply Chain: A Conceptual Framework

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Risks arising from the effect of disruptions and unsustainable practices constantly push the supply chain to uncompetitive positions. A smart production planning and control process must successfully address both risks by reducing them, thereby strengthening supply chain (SC) resilience and its ability to survive in the long term. On the one hand, the antidisruptive potential and the inherent sustainability implications of the zero-defect manufacturing (ZDM) management model should be highlighted. On the other hand, the digitization and virtualization of processes by Industry 4.0 (I4.0) digital technologies, namely digital twin (DT) technology, enable new simulation and optimization methods, especially in combination with machine learning (ML) procedures. This paper reviews the state of the art and proposes a ZDM strategy-based conceptual framework that models, optimizes and simulates the master production schedule (MPS) problem to maximize service levels in SCs. This conceptual framework will serve as a starting point for developing new MPS optimization models and algorithms in supply chain 4.0 (SC4.0) environments., The research leading to these results received funding from the European Union H2020 Program with grant agreements No. 825631 "Zero-Defect Manufacturing Platform (ZDMP)" and No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)", and from Grant RTI2018-101344-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A proposal of analytical formulations to calculate safety lead times under demand variability. A case study

  • Ayala, Ricardo
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] This paper deals with the issue of safety lead time (SLT) calculations in production-inventory systems in presence of both demand and replenishment lead time variability. We provide some formulations of the SLT and numerically show their performance as compared to a benchmark in the literature. Thus the main objective of this paper is to provide analytical formulations to calculate the SLT that contemplate demand variability. To this end, a literature review was done to analyze the approaches and justifications of the different revised research works to identify reference formulations according to the objectives of this work. A supply chain from the automotive sector was used as the study frame and to validate the proposed formulations. This supply chain involved two companies: a car manufacturer and a first-tier supplier. In order to compare the proposed formulations with one another, and with that currently used by the first-tier supplier and is the study object, three parameters were used: safety stock, the number of times stockout occurs and the mean stock. They allowed the final selection of the most suitable SLT formulation for each case study., The research that has led to the present results has received funding from: the European Union H2020 Programme, with grant agreement No. 958205 Industrial Data Services for Quality Control in Smart Manufacturing (i4Q) ; the MCIN/AEI/10.13039/501100011033 and by European Union Next GenerationEU/PRTR with grant agreement PDC2022-133957-I00) and the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana project entitled Industrial Production and Logistics Optimization in Industry 4.0 (i4OPT) (Ref. PROMETEO/2021/065).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacturing Data Analytics for Manufacturing Quality Assurance

  • Lourenço, Luis
  • Figueiras, Paulo
  • Costa, Ruben
  • Ntemi, Myrsini
  • Mandler, Benjamin
  • Tsanousa, Athina
  • Gialampoukidis, Ilias
  • Gomez, Ana
  • Urko, Leturiondo
  • Vrochidis, Stefanos
  • Gálvez-Settier, Santiago
  • Poler, R.|||0000-0003-4475-6371
[EN] Nowadays, manufacturing companies are eager to access insights from advanced analytics, without requiring them to have specialized IT workforce or data science advanced skills. Most of current solutions lack of easy-to-use advanced data preparation, production reporting and advanced analytics and prediction. Thanks to the increase in the use of sensors, actuators and instruments, European manufacturing lines collect a huge amount of data during the manufacturing process, which is very valuable for the improvement of quality in manufacturing, but analyzing huge amounts of data on a daily basis, requires heavy statistical and technology training and support, making them not accessible for SMEs. The European i4Q Project, aims at providing an IoT-based Reliable Industrial Data Services (RIDS), a complete suite consisting of 22 i4Q Solutions, able to manage the huge amount of industrial data coming from cheap cost-effective, smart, and small size interconnected factory devices for supporting manufacturing online monitoring and control. This paper will present a set of i4Q services, for data integration and fusion, data analytics and data distribution. Such services, will be responsible for the execution of AI workloads (including at the edge), enabling the dynamic deployment industrial scenarios based on a cloud/edge architecture. Monitoring at various levels is provided in i4Q through scalable tools and the collected data, is used for a variety of activities including resource monitoring and management, workload assignment, smart alerting, predictive failure and model (re)training., The authors acknowledge the European Commission for the support and funding under the scope of Horizon2020 i4Q Innovation Project (Agreement Number 958205) and the remaining partners of the i4Q Project Consortium.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of a multidimensional conceptual model for job shop smart manufacturing scheduling from the Industry 4.0 perspective

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Based on a scientific literature review in the conceptual domain defined by smart manufacturing scheduling (SMS), this article identifies the benefits and limitations of the reviewed contributions, establishes and discusses a set of criteria with which to collect and structure its main synergistic attributes, and devises a conceptual framework that models SMS around three axes: a semantic ontology context, a hierarchical agent structure, and the deep reinforcement learning (DRL) method. The main purpose of such a modelling research is to establish a conceptual and structured relationship framework to improve the efficiency of the job shop scheduling process using the approach defined by SMS. The presented model orients the job shop scheduling process towards greater flexibility, through enhanced rescheduling capability, and towards autonomous operation, mainly supported by the use of machine learning technology. To the best of our knowledge, there are no other similar conceptual models in the literature that synergistically combine the potential of the specific set of Industry 4.0 principles and technologies that model SMS. This research can provide guidance for practitioners and researchers¿ efforts to move toward the digital transformation of job shops., The research leading to these results received funding from the European Union H2020 Programme ,Belgium with grant agreements No. 825631 "Zero-Defect Manufacturing Platform (ZDMP) ", No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q) " and 872548 "Fostering DIHs for Embedding Interoperability in Cyber-Physical Systems of European SMEs (DIH4CPS) ", from Grant RTI2018-101344-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/2021/065).