Skip to main content

IDENTIFICACION BASADA EN OBJETOS DE CULTIVOS HORTICOLAS BAJO INVERNADERO A PARTIR DE ESTEREO IMAGENES DEL SATELITE WORLDVIEW-3 Y SERIES TEMPORALES DE LANDSAT 8

AGL2014-56017-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE ALMERIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

riUAL. Repositorio Institucional de la Universidad de Almería
Publication Artículo científico (JournalArticle)

Object-Based Greenhouse Mapping Using Very High Resolution Satellite Data and Landsat 8 Time Series

  • Aguilar Torres, Manuel Ángel
  • Nemmaoui, Abderrahim
  • Novelli, Antonio
  • Aguilar Torres, Fernando José
  • García Lorca, Andrés Miguel
Greenhouse mapping through remote sensing has received extensive attention over the last decades. In this article, the innovative goal relies on mapping greenhouses through the combined use of very high resolution satellite data (WorldView-2) and Landsat 8 Operational Land Imager (OLI) time series within a context of an object-based image analysis (OBIA) and decision tree classification. Thus, WorldView-2 was mainly used to segment the study area focusing on individual greenhouses. Basic spectral information, spectral and vegetation indices, textural features, seasonal statistics and a spectral metric (Moment Distance Index, MDI) derived from Landsat 8 time series and/or WorldView-2 imagery were computed on previously segmented image objects. In order to test its temporal stability, the same approach was applied for two different years, 2014 and 2015. In both years, MDI was pointed out as the most important feature to detect greenhouses. Moreover, the threshold value of this spectral metric turned to be extremely stable for both Landsat 8 and WorldView-2 imagery. A simple decision tree always using the same threshold values for features from Landsat 8 time series and WorldView-2 was finally proposed. Overall accuracies of 93.0% and 93.3% and kappa coefficients of 0.856 and 0.861 were attained for 2014 and 2015 datasets, respectively.
riUAL. Repositorio Institucional de la Universidad de Almería
Publication Artículo científico (JournalArticle)

Object-Based Greenhouse Horticultural Crop Identification from Multi-Temporal Satellite Imagery: A Case Study in Almeria, Spain.

  • Aguilar Torres, Manuel Ángel
  • Vallario, Andrea
  • Aguilar Torres, Fernando José
  • García Lorca, Andrés Miguel
  • Parente, Claudio
Greenhouse detection and mapping via remote sensing is a complex task, which has already been addressed in numerous studies. In this research, the innovative goal relies on the identification of greenhouse horticultural crops that were growing under plastic coverings on 30 September 2013. To this end, object-based image analysis (OBIA) and a decision tree classifier (DT) were applied to a set consisting of eight Landsat 8 OLI images collected from May to November 2013. Moreover, a single WorldView-2 satellite image acquired on 30 September 2013, was also used as a data source. In this approach, basic spectral information, textural features and several vegetation indices (VIs) derived from Landsat 8 and WorldView-2 multi-temporal satellite data were computed on previously segmented image objects in order to identify four of the most popular autumn crops cultivated under greenhouse in Almería, Spain (i.e., tomato, pepper, cucumber and aubergine). The best classification accuracy (81.3% overall accuracy) was achieved by using the full set of Landsat 8 time series. These results were considered good in the case of tomato and pepper crops, being significantly worse for cucumber and aubergine. These results were hardly improved by adding the information of the WorldView-2 image. The most important information for correct classification of different crops under greenhouses was related to the greenhouse management practices and not the spectral properties of the crops themselves.
riUAL. Repositorio Institucional de la Universidad de Almería
Publication Artículo científico (JournalArticle)

Greenhouse Crop Identification from Multi-Temporal Multi-Sensor Satellite Imagery Using Object-Based Approach: A Case Study from Almería (Spain)

  • Nemmaoui, Abderrahim
  • Aguilar Torres, Manuel Ángel
  • Aguilar Torres, Fernando José
  • Novelli, Antonio
  • García Lorca, Andrés Miguel
A workflow headed up to identify crops growing under plastic-covered greenhouses (PCG) and based on multi-temporal and multi-sensor satellite data is developed in this article. This workflow is made up of four steps: (i) data pre-processing, (ii) PCG segmentation, (iii) binary preclassification between greenhouses and non-greenhouses, and (iv) classification of horticultural crops under greenhouses regarding two agronomic seasons (autumn and spring). The segmentation stage was carried out by applying a multi-resolution segmentation algorithm on the pre-processed WorldView-2 data. The free access AssesSeg command line tool was used to determine the more suitable multi-resolution algorithm parameters. Two decision tree models mainly based on the Plastic Greenhouse Index were developed to perform greenhouse/non-greenhouse binary classification from Landsat 8 and Sentinel-2A time series, attaining overall accuracies of 92.65% and 93.97%, respectively. With regards to the classification of crops under PCG, pepper in autumn, and melon and watermelon in spring provided the best results (Fβ around 84% and 95%, respectively). Data from the Sentinel-2A time series showed slightly better accuracies than those from Landsat 8.
riUAL. Repositorio Institucional de la Universidad de Almería
Publication Artículo científico (JournalArticle)

Quality assessment of digital surface models extracted from WorldView-2 and WorldView-3 stereo pairs over different land covers

  • Aguilar Torres, Manuel Ángel
  • Nemmaoui, Abderrahim
  • Aguilar Torres, Fernando José
  • Qin, Rongjun
Digital surface models (DSMs) extracted from very high resolution (VHR) satellite stereo images are becoming more and more important in a wide range of geoscience applications. The number of software packages available for generating DSMs has been increasing rapidly. The main goal of this work is to explore the capabilities of VHR satellite stereo pairs for DSMs generation over different land-cover objects such as agricultural plastic greenhouses, bare soil and urban areas by using two software packages: (i) OrthoEngine (PCI), based on a hierarchical subpixel mean normalized cross correlation matching method, and (ii) RPC Stereo Processor (RSP), with a modified hierarchical semi-global matching method. Two VHR satellite stereo pairs from WorldView-2 (WV2) and WorldView-3 (WV3) were used to extract the DSMs. A quality assessment on these DSMs on both vertical accuracy and completeness was carried out by considering the following factors: (i) type of sensor (i.e., WV2 or WV3), (ii) software package (i.e., PCI or RSP) and (iii) type of land-cover objects (plastic greenhouses, bare soil and urban areas). A highly accurate light detection and ranging (LiDAR) derived DSM was used as the ground truth for validation. By comparing both software packages, we concluded that regarding DSM completeness, RSP produced significantly (p<0.05) better scores than PCI for all the sensors and type of land-cover objects. The percentage improvement in completeness by using RSP instead of PCI was approximately 2%, 18% and 26% for bare soil, greenhouses and urban areas respectively. Concerning the vertical accuracy in root mean square error (RMSE), the only factor clearly significant (p<0.05) was the land cover. Overall, WV3 DSM showed slightly better (not significant) vertical accuracy values than WV2. Finally, both software packages achieved similar vertical accuracy for the different land-cover objects and tested sensors.
riUAL. Repositorio Institucional de la Universidad de Almería
Publication Artículo científico (JournalArticle)

Performance evaluation of object based greenhouse detection from Sentinel-2 MSI and Landsat 8 OLI data: A case study from Almería (Spain)

  • Novelli, Antonio
  • Aguilar Torres, Manuel Ángel
  • Nemmaoui, Abderrahim
  • Aguilar Torres, Fernando José
  • Tarantino, Eufemia
tThis paper shows the first comparison between data from Sentinel-2 (S2) Multi Spectral Instrument (MSI)and Landsat 8 (L8) Operational Land Imager (OLI) headed up to greenhouse detection. Two closely relatedin time scenes, one for each sensor, were classified by using Object Based Image Analysis and RandomForest (RF). The RF input consisted of several object-based features computed from spectral bands andincluding mean values, spectral indices and textural features. S2 and L8 data comparisons were alsoextended using a common segmentation dataset extracted form VHR World-View 2 (WV2) imagery totest differences only due to their specific spectral contribution. The best band combinations to performsegmentation were found through a modified version of the Euclidian Distance 2 index. Four differentRF classifications schemes were considered achieving 89.1%, 91.3%, 90.9% and 93.4% as the best overallaccuracies respectively, evaluated over the whole study area.
riUAL. Repositorio Institucional de la Universidad de Almería
Publication Artículo científico (JournalArticle)

Classification of urban areas from GeoEye-1 imagery through texture features based on Histograms of Equivalent Patterns

  • Aguilar Torres, Manuel Ángel
  • Fernández, Antonio
  • Aguilar Torres, Fernando José
  • Bianconi Pettirossi, Francesco
  • García Lorca, Andrés Miguel
A family of 26 non-parametric texture descriptors based on Histograms of Equivalent Patterns (HEP) has been tested, many of them for the first time in remote sensing applications, to improve urban classification through object-based image analysis of GeoEye-1 imagery. These HEP descriptors have been compared to the widely known texture measures derived from the gray-level co-occurrence matrix (GLCM). All the five finally selected HEP descriptors (Local Binary Patterns, Improved Local Binary Patterns, Binary Gradient Contours and two different combinations of Completed Local Binary Patterns) performed faster in terms of execution time and yielded significantly better accuracy figures than GLCM features. Moreover, the HEP texture descriptors provided additional information to the basic spectral features from the GeoEye-1's bands (R, G, B, NIR, PAN) significantly improving overall accuracy values by around 3%. Conversely, and in statistic terms, strategies involving GLCM texture derivatives did not improve the classification accuracy achieved from only the spectral information. Lastly, both approaches (HEP and GLCM) showed similar behavior with regard to the training set size applied.
riUAL. Repositorio Institucional de la Universidad de Almería
Publication Artículo científico (JournalArticle)

AssesSeg—A Command Line Tool to Quantify Image Segmentation Quality: A Test Carried Out in Southern Spain from Satellite Imagery

  • Novelli, Antonio
  • Aguilar Torres, Manuel Ángel
  • Aguilar Torres, Fernando José
  • Nemmaoui, Abderrahim
  • Tarantino, Eufemia
This letter presents the capabilities of a command line tool created to assess the quality of segmented digital images. The executable source code, called AssesSeg, was written in Python 2.7 using open source libraries. AssesSeg (University of Almeria, Almeria, Spain; Politecnico di Bari, Bari, Italy) implements a modified version of the supervised discrepancy measure named Euclidean Distance 2 (ED2) and was tested on different satellite images (Sentinel-2, Landsat 8, and WorldView-2). The segmentation was applied to plastic covered greenhouse detection in the south of Spain (Almería). AssesSeg outputs were utilized to find the best band combinations for the performed segmentations of the images and showed a clear positive correlation between segmentation accuracy and the quantity of available reference data. This demonstrates the importance of a high number of reference data in supervised segmentation accuracy assessment problems.
riUAL. Repositorio Institucional de la Universidad de Almería
Publication Artículo científico (JournalArticle)

Improving georeferencing accuracy of Very High Resolution satellite imagery using freely available ancillary data at global coverage

  • Aguilar Torres, Manuel Ángel
  • Nemmaoui, Abderrahim
  • Aguilar Torres, Fernando José
  • Novelli, Antonio
  • García Lorca, Andrés Miguel
While impressive direct geolocation accuracies better than 5.0 m CE90 (90% of circular error) can be achieved from the last DigitalGlobe’s Very High Resolution (VHR) satellites (i.e. GeoEye-1 and WorldView-1/2/3/4), it is insufficient for many precise geodetic applications. For these sensors, the best horizontal geopositioning accuracies (around 0.55 m CE90) can be attained by using third-order 3D rational functions with vendor’s rational polynomial coefficients data refined by a zero-order polynomial adjustment obtained from a small number of very accurate ground control points (GCPs). However, these high-quality GCPs are not always available. In this work, two different approaches for improving the initial direct geolocation accuracy of VHR satellite imagery are proposed. Both of them are based on the extraction of three-dimensional GCPs from freely available ancillary data at global coverage such as multi-temporal information of Google Earth and the Shuttle Radar Topography Mission 30 m digital elevation model. The application of these approaches on WorldView-2 and GeoEye-1 stereo pairs over two different study sites proved to improve the horizontal direct geolocation accuracy values around of 75%.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

An investigation on the use of local multi-resolution patterns for image classification

  • González Rodríguez, Maria Elena
  • Bianconi, Francesco
  • Fernández Álvarez, Antonio
The subject of this study is the use of local multi-dimensional patterns for image classification. The contribution is both theoretical and experimental: on the one hand the paper introduces a complete and general mathematical model for encoding multi-resolution, rotation-invariant local patterns; on the other experimentally evaluates the use of multi-resolution patterns for image classification both from an information- and performance-based standpoint. The results indicate that the joint multi-resolution model proposed in the paper can actually convey an additional amount of information with respect to the marginal model; but also that the marginal model (i.e. concatenation of features computed at different resolutions) can be a good enough approximation for practical applications., Comisión Europea | Ref. LIFE12 ENV/IT/000411, Ministerio de Economía y Competitividad | Ref. AGL2014-56017-R, Università degli Studi di Perugia