Skip to main content

APLICACION DEL ANALISIS DEL PLEGAMIENTO A LA INVESTIGACION DE RECURSOS GEOLOGICOS

CGL2015-66997-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE OVIEDO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Horizontal/vertical motion and wedge geometry of the Sinú Fold Belt, South-Caribbean accretionary prism, NW Colombia: Implications for a morphostructural zoning

  • Rodríguez Álvarez, Indira
  • Poblet Esplugas, Josep
  • Bulnes Cudeiro, María Teresa
  • Flinch, Joan F.
  • Masini, Massimiliano
[EN] The Sinú Fold Belt, located in the southwestern part of the South Caribbean Deformed Belt, northwest Colombia, has been interpreted as the outer portion of an accretionary wedge resulting from the subduction of the Caribbean Plate under the South American Plate. Several geological sections, across and along the offshore portion of the Sinú Fold Belt, have been constructed through geological interpretation of 2D seismic sections constrained by a few exploration wells. Their analysis has allowed us to quantify the amount of horizontal motion (shortening responsible for the structures and basal detachment displacement) and vertical motion (tectonic subsidence/uplift and wedge vertical thickening) undergone by the belt over time; unravel its recent evolution consisting of almost no active structures in the south edge and a large amount of active structures northwards; quantify its pore pressure, coefficient of friction and strength using its wedge geometry consisting of high taper angles in the lower continental slope near the deformation front and lower taper angles in the upper continental slope away from it; and understand the aseismic and trench-lacking character of the belt. These observations have been crucial to identify the main features of the morphostructural zones across the belt (Colombian Basin, lower continental slope, upper continental slope and continental shelf) and establish a new along-strike zoning (north region influenced by the Magdalena Fan/Canoas Oblique Ramp, Sinú Fold Belt s.s., and south salient influenced by the Uramita Fault), SI, We thank the editor Tiago Alves, Christopher Connors and an anonymous reviewer for their useful comments and suggestions, as well as J. Gallastegui and D. Pedreira for their help regarding geophysical issues. I. Rodríguez work has been supported by the research contract CN-016-15 (“Convenio específico para la realizacion ´ de una tesis doctoral en la línea de investigacion ´ en Geología y Geosistemas del programa de doctorado en Biogeociencias”) under the framework agreement between Repsol Exploracion ´ S.A. and the University of Oviedo, Spain. We acknowledge the Colombian Agencia Nacional de Hidrocarburos (ANH) and Repsol Exploracion ´ S.A. for providing us the data and for the research stay at Repsol (Madrid) offices of I. Rodríguez. We thank G. Zamora and B. Amigo for their help with the data and with the Repsol-Universidad de Oviedo contract. We would like to acknowledge financial support by research project CGL 2015-66997-R (“Aplicacion ´ del analisis ´ del plegamiento a la investigacion ´ de recur sos geologicos ´ ” -AAPLIREGE-) funded by the Spanish Ministry for Economy and Competitiveness and the European Fund for Regional Development (FEDER), research project PID2021-126357NB-100 (Cenozoic uplift of the N-Iberian margin at different scales: influence on seismic activity, relief, emerged/submerged lands and underground aquifers -CUNIMS-) funded by the Spanish Ministry for Science and Innovation, Spain, and research project FC-GRUPIN-IDI/2018/000216 (“Ayudas a organismos públicos de investigacion ´ para apoyar la activi dad que desarrollen sus grupos de investigacion ´ en el Principado de Asturias en el periodo 2018–2020”) funded by the Principado de Astu rias. We thank Schlumberger for permission to use the software Petrel, IHS Markit for permission to use the software Kingdom Suite, Petroleum Exploration Experts-Midland Valley for permission to use the software Move, and J. G. Antuna ˜ for maintaining the equipment. We would like to dedicate this article to our colleague, recently deceased, Alberto Marcos, professor at the University of Oviedo
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Structural style and evolution of the offshore portion of the Sinu Fold Belt (South Caribbean Deformed Belt) and adjacent part of the Colombian Basin

  • Rodríguez Álvarez, Indira
  • Bulnes Cudeiro, María Teresa
  • Poblet Esplugas, Josep
  • Masini, Massimiliano
  • Flinch, Joan F.
[EN] The Sinu fold belt, located in northwestern Colombia, is the southwesternmost part of the South Caribbean Deformed Belt, which has been interpreted as an accretionary wedge resulting from the subduction of the Caribbean Plate under the South American Plate. The geological interpretation of 2D seismic surveys and bathymetric maps, with the aid of a few exploration wells, has been the basis to construct a structural map and several geological sections to illustrate the offshore part of the Sinu Fold Belt and the portion of the Colombian Basin adjacent to the belt. Their analysis has allowed us to characterize different structural styles (thrusts and related folds in the outer part of the belt, and normal faults and shale diapirs in the inner one), the timing of the structures, as well as the kinematic evolution from a Cretaceous-Paleocene extensional event responsible for the Colombian Basin structure to the Pliocene-Quaternary contractional event which caused the Sinu Fold Belt, SI, Comments and suggestions by the editor T. Alves and two anony- mous reviewers have substantially improved the manuscript. We thank J. Gallastegui and D. Pedreira for their support with geophysical issues. I. Rodríguez work has been supported by the research contract CN-016- 15 (“Convenio específico para la realizaci´on de una tesis doctoral en la línea de investigaci´on en Geología y Geosistemas del programa de doctorado en Biogeociencias”) under the framework agreement between Repsol Exploraci´on S.A. and the University of Oviedo. We acknowledge the Colombian Agencia Nacional de Hidrocarburos (ANH) and Repsol Exploraci´on S.A. for providing us the data, and for the research stay of I. Rodríguez at the Repsol offices in Madrid. We thank G. Zamora and B. Amigo for their help with the data and with the Repsol-Universidad de Oviedo contract. We would like to acknowledge financial support by research project CGL2015-66997-R (“Aplicaci´on del an´alisis del plega- miento a la investigaci´on de recursos geol´ogicos” -AAPLIREGE-) funded by the Ministerio de Economía y Competitividad de Espa˜na y Fondo Europeo de Desarrollo Regional (FEDER), as well as research project FC- GRUPIN-IDI/2018/000216 (“Ayudas a organismos públicos de inves- tigaci´on para apoyar la actividad que desarrollen sus grupos de inves- tigaci´on en el Principado de Asturias en el periodo 2018–2020”) funded by the Principado de Asturias. We thank Schlumberger for permission to use the software Petrel (Academic agreement 1-1C5GCE1 Revision 1), Petroleum Exploration Experts-Midland Valley for permission to use the software Move (Contract reference Agr_ULA_UniOviedo_18_11_01), IHS Markit for permission to use the software Kingdom Suite (University Grant Program), and J. G. Antu˜na for maintaining the equipment
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Mechanical stratigraphy influence on fault-related folds development: Insights from the Cantabrian Zone (NW Iberian Peninsula)

  • Bulnes Cudeiro, María Teresa
  • Poblet Esplugas, Josep
  • Uzkeda Apesteguia, Hodei
  • Rodríguez Álvarez, Indira
[EN] An excellently exposed outcrop of Carboniferous rocks in the Cantabrian Zone (Variscan foreland fold-thrust belt in NW Iberia) displays fault-bend, fault-propagation and detachment folds. To unravel the parameters that controlled their development, we constructed detailed cross-sections and analysed them. Detachment folds exhibit the greatest amounts of layer-parallel/bulk strain, forelimb dip and forelimb/hinge thickening and the lowest interlimb angle, whereas fault-bend folds have the lowest values except for the interlimb angle, with fault-propagation folds exhibiting intermediate values. The forelimbs of all these folds show some strain and thickening, and the detachment folds also show thickening and strain in the hinge area. Mechanical stratigraphy was determined to be the main controlling factor on the fold/thrust style; ramp folds developed in thick-bedded, isotropic, relatively strong and brittle rocks, whereas detachment folds developed in a thin-bedded, anisotropic, relatively weak and ductile unit. Competent rocks and smooth bedding surfaces induced fault-bend folding, whereas less competent and rough bedding surfaces favoured fault-propagation folding. The main detachments are located at the boundaries between mechanical units with substantial changes in their mechanical properties. The size of the structures depends on the occurrence of a basal detachment, variety of lithologies with different competences and smoothness of bedding surfaces, SI, We would like to acknowledge financial support by research project CGL 2015-66997-R (“Aplicación del análisis del plegamiento a la investigación de recursos geológicos” -AAPLIREGE-) funded by the Spanish Ministry for Economy and Competitivity and the European Fund for Regional Development (FEDER). H. Uzkeda work has been partly supported by research contract CN-16-014 (“Convenio específico para la realización de un trabajo de investigación post-doctoral en la disciplina de Geología”) and I. Rodríguez-Álvarez work has been partly supported by research contract CN-016-15 (“Convenio específico para la realización de una tesis doctoral en la línea de investigación en Geología y Geosistemas del programa de doctorado en Biogeociencias”), both under the framework agreement between Repsol Exploración S.A. and the University of Oviedo. We thank Midland Valley for permission to use the software Move (Academic site software license and support agreement number 1915). Richard Allmendinger and Nestor Cardozo are thanked for permission to use their software Stereonet. We thank the editor I. Alsop, J.L. Alonso, M. Masini, F. Bastida, L.P. Fernández and an anonymous reviewer for their scientific contribution, J.G. Antuña for maintaining the software for structural interpretation and modelling, and I. Moriano for assisting us during one field campaign
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Exhumation of high-P marbles of the Samaná Terrane (Northern Hispaniola): Insights from paleostress and microstructural imprints

  • Fernández Rodríguez, Francisco José
  • Rodríguez Álvarez, Indira
  • Escuder Viruete, Javier
  • Pérez Estaún, Andrés
[EN] Paleostress variations and microstructural imprints of a subducted carbonate slab record changes in mechanical strength during its exhumation. The slab studied here forms part of the high-P Samaná Terrane located on the north-eastern margin of the Hispaniola Island. Cold-cathodoluminescence images reveal relict cataclastic fabrics within the highest-pressure marbles of the Punta Balandra and Santa Bárbara Schists structural units, formed in the early stages of exhumation at P-T conditions ca. 2.0 GPa − 500 °C. Cataclastic flow was triggered after a moderate increase of water content (1.2% < w.t. H2O < 1.8%). Accordingly, grain sizes larger than equivalent radius ri = 40 μm preserve distribution of power law type with fractal dimensions D2 = 2.43 in Punta Balandra unit and D2 = 2.72 in Santa Bárbara unit. After cataclastic flow, the stress dropped and grain comminution conducted the marbles to the dissolution-precipitation domain. Then, as exhumation progressed, the effective stress increased and calcite intracrystalline plasticity process dominated. Calcite-twinning incidence and recrystallized grain-size indicate maximum paleostress ca. 350 MPa and mean flow paleostress ≈ 130 MPa. SEM-EBSD analyses show similar weak type-c calcite fabrics in all high-P carbonate units, even though they record different metamorphic P peak. Therefore, intracrystalline plasticity was probably dominant during the development of the final tectonic fabric. Finer grain-size distributions are out of fractal range, with D1 < 1, because of the further superposed deformation. Most of the data are consistent with an initial forced exhumation model of the carbonate slab in a brittle-ductile rheology of the confined plate interface, SI, We thank D. Prior, E. Mariani and the Department of Earth Science of Liverpool University for their assistance and contribution to calcite-CPOs analysis. This contribution was funded by the research projects CGL2014-53388 and CGL2015-66997 of the Spanish Ministry of Science and Innovation. Funding by the CGL2009-08674/BTE and CGL2012-33669/BTE projects is also acknowledged. This paper was improved the comments of the reviewer J. P. Avouac and the Editor R. Carbonell