Skip to main content

DESARROLLO DE CODIGOS Y ALGORITMOS PARALELOS DE ALTAS PRESTACIONES CON FINES AL DISEÑO OPTIMIZADO DE SISTEMAS Y EQUIPOS TERMICOS

ENE2010-17801

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Effect of collisions on the particle behavior in a turbulent square duct flow

  • Zhang, Hao
  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
  • Gorobets, Andrei
  • Oliva Llena, Asensio|||0000-0002-2805-4794
  • Yang, Dongmin
  • Tan, Yuanqiang
  • Sheng, Yong
The effect of collisions on the particle behavior in a fully developed turbulent flow in a straight square duct at Re-r = 300 is numerically investigated. The hydrodynamic modeling of the fluid phase is based on direct numerical simulation. The kinematics and trajectory of the particles as well as the collisions are described by the discrete element method. Three sizes of particles are considered with diameters equal to 50 mu m, 100 mu m and 500 mu m. Firstly, the particle transportation by turbulent flow is studied in the absence of the gravitational effect. It is found that the collisions play an important role in the particle distribution especially in the near-wall regions. The inter-particle collisions enhance the particle diffusion in the direction perpendicular to streamwise flow and make the particles distribute more uniformly near the wall. Then, the particle deposition is studied under the effect of the wall-normal gravity force in which the influence of collisions on the particle resuspension rate and the final stage of particle distribution on the duct floor are discussed, respectively. The collisions are found to have influence on the particle resuspension rate near the duct floor whereas hardly affect the particle behavior near the duct center. Under the gravitational effect the 50 mu m particles deposit more efficiently near the side walls but the 100 mu m and 500 mu m particles preferentially deposit near the center of the duct floor. Moreover, all the sizes of particles tend to concentrate near the center of the duct floor at the final stage of the particle deposition when the inter-particle collisions are considered., This work has been financially supported by the Ministerio de Ciencia e Innovación, Spain (ENE2010-17801). Hao Zhang would like to acknowledge the FI-AGAUR doctorate scholarship granted by the Secretaria d'Universitats i Recerca (SUR) del Departament d'Economia i Coneixement (ECO) de la Generalitat de Catalunya, and by the European Social Fund. F. Xavier Trias would like to thank the financial support by the Ramón y Cajal postdoctoral contracts (RYC-2012- 11996) by the Ministerio de Ciencia e Innovación. Yuanqiang Tan would like to thank the Aid Program for Science and Technology Innovative Research Team in Higher Educational Institutions of Hunan Province [2012] 318. The calculations have been performed on the IBM MareNostrum supercomputer at the Barcelona Supercomputing Center. The authors thankfully acknowledge these institutions. We also thank the anonymous reviewers for their comments and remarks which helped to improve the quality of this work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Parallel adaptive mesh refinement for large-eddy simulations of turbulent flows

  • Antepara Zambrano, Óscar|||0000-0002-4596-0289
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Borrell Pol, Ricard
  • Chiva Segura, Jorge|||0000-0001-5466-6869
  • Oliva Llena, Asensio|||0000-0002-2805-4794
In this paper a parallel adaptive mesh refinement (AMR) strategy for large eddy simulations (LES) of turbulent flows is presented. The underlying discretization of the Navier-Stokes equations is based on a finite-volume symmetry-preserving formulation, with the aim of preserving the symmetry properties of the continuous differential operators and ensure both, stability and conservation of kinetic-energy balance. The conservation properties are tested for the meshes resulting from the AMR process, which typically contain transitions between zones with different level of refinement. Our AMR scheme applies a cell-based refinement technique, with a physics-based refinement criteria based on the variational multi-scale (VMS) decomposition theory. The overall AMR process, from the selection of the cells to be refined/coarsened till the pre-processing of the resulting mesh, has been implemented in a parallel code, for which the parallel performance has been attested on an AMD Opteron based supercomputer. Finally, the robustness and accuracy of our methodology is shown on the numerical simulation of the turbulent flow around a square cylinder at Re = 22,000 and the turbulent flow around two side-by-side square cylinders at Re = 21,000., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Numerical analysis of the transpose diffusive term for viscoplastic-type non-Newtonian fluid flows using a collocated variable arrangement

  • Carmona Muñoz, Ángel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Oliva Llena, Asensio|||0000-0002-2805-4794
The aim of this work is to delve into the numerical analysis of viscoplastic-type non-Newtonian fluid flows. Specifically, improvements in the spatial discretization schemes and the temporal integration methods have been proposed to overcome the numerical problems introduced by the transpose diffusive term and associated with the velocity field discontinuity, the artificial viscous diffusion, and the transpose viscous coupling. The resulting knowledge may be useful, among many other reasons, to improve the corresponding numerical simulations and gain insight into the underlying physics of this class of non-Newtonian fluid flows., The aim of this work is to delve into the numerical analysis of viscoplastic-type non-Newtonian fluid flows. Specifically, improvements in the spatial discretization schemes and the temporal integration methods have been proposed to overcome the numerical problems introduced by the transpose diffusive term and associated with the velocity field discontinuity, the artificial viscous diffusion, and the transpose viscous coupling. The resulting knowledge may be useful, among many other reasons, to improve the corresponding numerical simulations and gain insight into the underlying physics of this class of non-Newtonian fluid flows., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Parallel sweep-based preconditioner for the solution of the linear Boltzmann transport equation

  • Borrell Pol, Ricard
  • Colomer Rey, Guillem|||0000-0003-4592-0217
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Oliva Llena, Asensio|||0000-0002-2805-4794
The Boltzmann transport equation is solved in the context of radiative heat transfer, for an isotropically scattering medium with reflecting boundaries. Under these circumstances, the different ordinates of the angular flux are mutually coupled. We explore here the use of a parallel sweep-based block diagonal preconditioner as a complement of the GMRES solver on the solution of the discretization matrix (which includes all the inter-ordinate couplings). The validity of this approach, when compared to the standard source iteration scheme, is successfully assessed for a significant range of the coupling parameters., This work has been financially supported by Termo Fluids S.L., and by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain, (ENE2010-17801). Calculations have been performed on the IBM MareNostrum II supercomputer at the Barcelona Supercomputing Center., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

PIBM: Particulate immersed boundary method for fluid-particle interaction problems

  • Zhang, Hao
  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
  • Oliva Llena, Asensio|||0000-0002-2805-4794
  • Yang, Dongmin
  • Tan, Yuanqiang
  • Shu, Shi
  • Sheng, Yong
It is well known that the number of particles should be scaled up to enable industrial scale simulation. The calculations are more computationally intensive when the motion of the surrounding fluid is considered. Besides the advances in computer hardware and numerical algorithms, the coupling scheme also plays an important role on the computational efficiency. In this study, a particulate immersed boundary method (PIBM) for simulating the fluid-particle multiphase flow was presented and assessed in both two- and three-dimensional applications. The idea behind PIBM derives from the conventional momentum exchange-based Immersed Boundary Method (IBM) by treating each Lagrangian point as a solid particle. This treatment enables Lattice Boltzmann Method (LBM) to be coupled with fine particles residing within a particular grid cell. Compared with the conventional IBM, dozens of times speedup in two-dimensional simulation and hundreds of times in three-dimensional simulation can be expected under the same particle and mesh number. Numerical simulations of particle sedimentation in Newtonian flows were canducted based on a combined LBM-PIBM-Discrete Element Method (DEM) scheme, showing that the PIBM can capture the feature of particulate flows in fluid and is indeed a promising scheme for the solution of the fluid-particle interaction problems., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Numerical analysis of the transpose diffusive term for viscoplastic-type non-Newtonian fluid flows using a collocated variable arrangement

  • Carmona Muñoz, Ángel
  • Lehmkuhl Barba, Oriol
  • Pérez Segarra, Carlos David
  • Oliva Llena, Asensio
The aim of this work is to delve into the numerical analysis of viscoplastic-type non-Newtonian fluid flows. Specifically, improvements in the spatial discretization schemes and the temporal integration methods have been proposed to overcome the numerical problems introduced by the transpose diffusive term and associated with the velocity field discontinuity, the artificial viscous diffusion, and the transpose viscous coupling. The resulting knowledge may be useful, among many other reasons, to improve the corresponding numerical simulations and gain insight into the underlying physics of this class of non-Newtonian fluid flows., The aim of this work is to delve into the numerical analysis of viscoplastic-type non-Newtonian fluid flows. Specifically, improvements in the spatial discretization schemes and the temporal integration methods have been proposed to overcome the numerical problems introduced by the transpose diffusive term and associated with the velocity field discontinuity, the artificial viscous diffusion, and the transpose viscous coupling. The resulting knowledge may be useful, among many other reasons, to improve the corresponding numerical simulations and gain insight into the underlying physics of this class of non-Newtonian fluid flows., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Parallel sweep-based preconditioner for the solution of the linear Boltzmann transport equation

  • Borrell Pol, Ricard
  • Colomer Rey, Guillem
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
  • Oliva Llena, Asensio
The Boltzmann transport equation is solved in the context of radiative heat transfer, for an isotropically scattering medium with reflecting boundaries. Under these circumstances, the different ordinates of the angular flux are mutually coupled. We explore here the use of a parallel sweep-based block diagonal preconditioner as a complement of the GMRES solver on the solution of the discretization matrix (which includes all the inter-ordinate couplings). The validity of this approach, when compared to the standard source iteration scheme, is successfully assessed for a significant range of the coupling parameters., This work has been financially supported by Termo Fluids S.L., and by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain, (ENE2010-17801). Calculations have been performed on the IBM MareNostrum II supercomputer at the Barcelona Supercomputing Center., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Parallel adaptive mesh refinement for large-eddy simulations of turbulent flows

  • Antepara Zambrano, Óscar
  • Lehmkuhl Barba, Oriol
  • Borrell Pol, Ricard
  • Chiva Segura, Jorge
  • Oliva Llena, Asensio
In this paper a parallel adaptive mesh refinement (AMR) strategy for large eddy simulations (LES) of turbulent flows is presented. The underlying discretization of the Navier-Stokes equations is based on a finite-volume symmetry-preserving formulation, with the aim of preserving the symmetry properties of the continuous differential operators and ensure both, stability and conservation of kinetic-energy balance. The conservation properties are tested for the meshes resulting from the AMR process, which typically contain transitions between zones with different level of refinement. Our AMR scheme applies a cell-based refinement technique, with a physics-based refinement criteria based on the variational multi-scale (VMS) decomposition theory. The overall AMR process, from the selection of the cells to be refined/coarsened till the pre-processing of the resulting mesh, has been implemented in a parallel code, for which the parallel performance has been attested on an AMD Opteron based supercomputer. Finally, the robustness and accuracy of our methodology is shown on the numerical simulation of the turbulent flow around a square cylinder at Re = 22,000 and the turbulent flow around two side-by-side square cylinders at Re = 21,000., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of collisions on the particle behavior in a turbulent square duct flow

  • Zhang, Hao
  • Trias Miquel, Francesc Xavier
  • Gorobets, Andrei
  • Oliva Llena, Asensio
  • Yang, Dongmin
  • Tan, Yuanqiang
  • Sheng, Yong
The effect of collisions on the particle behavior in a fully developed turbulent flow in a straight square duct at Re-r = 300 is numerically investigated. The hydrodynamic modeling of the fluid phase is based on direct numerical simulation. The kinematics and trajectory of the particles as well as the collisions are described by the discrete element method. Three sizes of particles are considered with diameters equal to 50 mu m, 100 mu m and 500 mu m. Firstly, the particle transportation by turbulent flow is studied in the absence of the gravitational effect. It is found that the collisions play an important role in the particle distribution especially in the near-wall regions. The inter-particle collisions enhance the particle diffusion in the direction perpendicular to streamwise flow and make the particles distribute more uniformly near the wall. Then, the particle deposition is studied under the effect of the wall-normal gravity force in which the influence of collisions on the particle resuspension rate and the final stage of particle distribution on the duct floor are discussed, respectively. The collisions are found to have influence on the particle resuspension rate near the duct floor whereas hardly affect the particle behavior near the duct center. Under the gravitational effect the 50 mu m particles deposit more efficiently near the side walls but the 100 mu m and 500 mu m particles preferentially deposit near the center of the duct floor. Moreover, all the sizes of particles tend to concentrate near the center of the duct floor at the final stage of the particle deposition when the inter-particle collisions are considered., This work has been financially supported by the Ministerio de Ciencia e Innovación, Spain (ENE2010-17801). Hao Zhang would like to acknowledge the FI-AGAUR doctorate scholarship granted by the Secretaria d'Universitats i Recerca (SUR) del Departament d'Economia i Coneixement (ECO) de la Generalitat de Catalunya, and by the European Social Fund. F. Xavier Trias would like to thank the financial support by the Ramón y Cajal postdoctoral contracts (RYC-2012- 11996) by the Ministerio de Ciencia e Innovación. Yuanqiang Tan would like to thank the Aid Program for Science and Technology Innovative Research Team in Higher Educational Institutions of Hunan Province [2012] 318. The calculations have been performed on the IBM MareNostrum supercomputer at the Barcelona Supercomputing Center. The authors thankfully acknowledge these institutions. We also thank the anonymous reviewers for their comments and remarks which helped to improve the quality of this work., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

PIBM: Particulate immersed boundary method for fluid-particle interaction problems

  • Zhang, Hao
  • Trias Miquel, Francesc Xavier
  • Oliva Llena, Asensio
  • Yang, Dongmin
  • Tan, Yuanqiang
  • Shu, Shi
  • Sheng, Yong
It is well known that the number of particles should be scaled up to enable industrial scale simulation. The calculations are more computationally intensive when the motion of the surrounding fluid is considered. Besides the advances in computer hardware and numerical algorithms, the coupling scheme also plays an important role on the computational efficiency. In this study, a particulate immersed boundary method (PIBM) for simulating the fluid-particle multiphase flow was presented and assessed in both two- and three-dimensional applications. The idea behind PIBM derives from the conventional momentum exchange-based Immersed Boundary Method (IBM) by treating each Lagrangian point as a solid particle. This treatment enables Lattice Boltzmann Method (LBM) to be coupled with fine particles residing within a particular grid cell. Compared with the conventional IBM, dozens of times speedup in two-dimensional simulation and hundreds of times in three-dimensional simulation can be expected under the same particle and mesh number. Numerical simulations of particle sedimentation in Newtonian flows were canducted based on a combined LBM-PIBM-Discrete Element Method (DEM) scheme, showing that the PIBM can capture the feature of particulate flows in fluid and is indeed a promising scheme for the solution of the fluid-particle interaction problems., Peer Reviewed, Postprint (author's final draft)