Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accounting for polarization-related effects in the measurement of the bidirectional reflectance distribution function

  • Calderón, A.
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
12 pags., 10 figs., 1 tab., When measuring the Bidirectional Reflectance Distribution Function (BRDF) to characterize typical materials, the effect of the polarization of the light source or the dependence of the detector on the polarization is not usually considered, even though many studies have proven their impact in the uncertainty of the BRDF of most materials, including diffuse reflectance standards. A methodology to assess polarization-related effects proposed by other authors has been tested in this work for the measurement of the BRDF of four typical materials used for realizing white diffuse reflectance standards (ceramic tile, barium sulfate, Spectralon and Russian opal glass). Relative systematic error due to polarizing conditions is calculated as a combination of the instrument polarization bias and sample-based coefficients, and the impact of the proposed methodology on the uncertainty is discussed., This article was written within the EMPIR 18SIB03 Project “New quantities for the measurement of appearance” (BxDiff). The EMPIR is jointly funded by the EMPIR participating countries within EURAMET and the European Union. Part of the authors (Instituto de Optica ‘Daza de Valdes’) are also grateful to MCIU/AEI/FEDER, UE for funding the project PGC2018-096470-B-I00 and to Comunidad de Madrid for funding the project S2018/NMT-4326-SINFOTON2-C.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fundamental scattering quantities for the determination of reflectance and transmittance

  • Ferrero, Alejandro
  • Frisvad, J.R.
  • Simonot, L.
  • Santafé, Pablo
  • Schirmacher, A.
  • Campos Acosta, Joaquín
  • Hebert, M.
13 pags., 2 figs., 1 tab., The bidirectional reflectance distribution function (BRDF) and the bidirectional scattering - surface reflectance distribution function (BSSRDF), which relate radiance at the surface to irradiance and radiant flux, respectively, are regarded as the most fundamental scattering quantities used to determine the reflectance of objects. However, for materials where the optical radiation is transmitted under the surface, this radiance depends not only on irradiance and radiant flux, but also on the size of the irradiated area of the surface. This article provides insight into such dependence under the special condition in which the radiance is evaluated within the irradiated area and, consequently, is produced by both the insurface reflection and the subsurface scattering, in contrast to the situation in which the radiance is evaluated at non-irradiated areas and only subsurface scattering contributes. By explicitly considering both contributions, two other scattering quantities are defined: one that accounts exclusively for the insurface reflection and the other that accounts for subsurface scattering. In this regard, these quantities might be considered more fundamental than the BRDF and the BSSRDF, although they are coincident with these two functions apart from the above-mentioned special condition and for materials with negligible subsurface scattering. In this work, the relevance of the proposed scattering quantities is supported by experimental data, practical considerations are given for measuring them, and their relation to the bidirectional transmittance distribution function (BTDF) is discussed., This investigation was carried out within the scope of EMPIR project 18SIB03, “New quantities for the measurement of appearance” (BxDiff). EMPIR is jointly funded by the EMPIR participating countries within EURAMET and the European Union. Some of the authors (CSIC) are would like to acknowledge project PGC2018-096470-B-I00 BISCAT (MCIU/AEI/FEDER,UE). We are grateful to Covestro Deutschland AG for providing with translucent samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Primary facility for traceable measurement of the BSSRDF

  • Santafé, Pablo
  • Ferrero, Alejandro
  • Tejedor-Sierra, Néstor
  • Campos Acosta, Joaquín
14 pags., 8 figs., 2 tabs., The bidirectional scattering-surface reflectance distribution function (BSSRDF) is the function that describes the variation of the radiance of the elementary areas of a surface with respect to the directionally incident radiant flux on that surface. Measurements of the BSSRDF are important for characterizing the translucency of objects and for obtaining those optical parameters affecting volume scattering. However, to date, no traceable measurements of this function are available, since, likely due to its technical complexity, no standard measurement procedure has been established. We have developed a primary facility for measuring the BSSRDF based on a gonio-spectrophotometer with spatial resolution in the collection, spectral resolution in the irradiation, and angular resolution both for irradiation and collection directions. The BSSRDF of twelve homogeneous and translucent samples (with controlled values for the mean diameter of the scattering particles and their concentration) have been measured with relative uncertainties below 3% inside the irradiated area. Some results are shown and commented. This primary facility will allow the BSSRDF scale to be transferred to other instruments., Comunidad de Madrid (S2018/NMT-4326-SINFOTON2-C); European Association of National Metrology Institutes (18SIB03); Ministerio de Economía, Industria y Competitividad, Gobierno de España (MCIU/AEI/FEDER,UE) PGC2018-096470-B-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development and comparison of primary facilities for traceable BSSRDF measurements

  • Santafé, Pablo
  • Gevaux, Lou
  • Ferrero, Alejandro
  • Fontanot, Tommaso
  • Audenaert, Jan
  • Meuret, Youri
  • Obein, Gaël
  • Campos Acosta, Joaquín
16 pags., 15 figs., 6 tabs., The bidirectional scattering-surface reflectance distribution function (BSSRDF) describes the radiance originated by the volume scattering and the surface reflectance of any position on the surface of a sample, when it is directionally irradiated at any other position. The present state of the technology for appearance rendering requires a more detailed physical description of translucent objects by traceable measurements of the BSSRDF. This work presents two primary facilities developed for traceable BSSRDF measurements by different measuring approaches. Their results on the same translucent samples have been compared and the achieved BSSRDF scale has been transferred to a commercial measuring system. This study highlights the problems of the different measuring instrument designs and provides the scientific community with more knowledge on the measurement of the BSSRDF, which will be crucial for future works on material appearance., This work has been done in the frame of the project 18SIB03 BxDiff, that has received funding from the EMPIR programme co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme. P Santafé-Gabarda, A Ferrero and J Campos would also like to acknowledge Project PGC2018-096470-B-I00 BISCAT (MCIU/AEI/FEDER,UE) and Comunidad de Madrid, Grant Number S2018/NMT-4326-SINFOTON2-C. We are grateful to Covestro Deutschland AG for providing us with translucent samples.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterizing linearity of a large area InGaAs photodiode in direct detection mode, at room temperature, from 100 pA to 10 µA

  • Tejedor-Sierra, Néstor
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
5 pages, 7 figures, 1 table, Nonlinearity characterization of detectors is necessary for performing measurements at different radiant flux levels, as it is the case in bidirectional reflectance distribution function (BRDF) measurements. The differential spectral responsivity (DSR) method is one of the typical procedures for this characterization. In this work, we use attenuation devices to decrease the response of the detector while adding a neutral density filter to record its transmittance, which should be constant at the different signal levels. In this work, we intend to use this method to characterize the linearity of a large area InGaAs photodiode in the near-infrared spectral range, in direct detection mode at room temperature and within a signal range from 100 pA to 10 µA., European Regional Development Fund (PGC2018-096470B-I00, TED2021-129661B-C21); Agencia Estatal de Investigación (PGC2018-096470-B-I00, TED2021-129661B-C21); 10-8 Photocurrent / A 10-6 Ministerio de Ciencia, Innovación y Universidades (PGC2018-096470-B-I00, TED2021-129661B-C21)., Peer reviewed