Skip to main content

ECODISPOSITIVOS ANALITICOS BASADOS EN TECNOLOGIAS 'LAB-ON-PAPER' PARA LA DETECCION DE CONTAMINANTES AMBIENTALES Y ALIMENTARIOS

PID2022-136337OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

In situ formation of a Fe3O4@HgS nanocomposite for green preconcentration of Hg followed by detection with a direct mercury analyzer

  • González Fernández, Aida
  • De La Calle Gonzalez, Inmaculada
  • Romero Rivas, Vanesa
  • Lavilla Beltrán, Maria Isela
  • Bendicho Hernández, Jose Carlos
A novel method with a high greenness profile for the selective preconcentration and detection of Hg at ultratrace levels that involves magnetic nanoparticles has been developed. The ultrasonic decomposition of l-cysteine generated sulphide anion, which acts as a precursor for the formation of Fe3O4@HgS structures resulting in the efficient trapping of Hg(II) onto magnetite. Ultrasonic energy can be considered as green energy and l-cysteine is more environmentally friendly reagent than other sulphide precursors such as sodium sulphide. The magnetic sorbent allowed an easy phase separation using a magnet, thus avoiding centrifugation or filtration steps. A direct mercury analyzer allowed the direct and sensitive determination of the Hg collected onto the magnetic phase. A preconcentration factor of up to 91 and a limit of detection of 0.04 μg L−1 Hg can be achieved using a sample volume of 20 mL. Three reference materials were analyzed after application of the developed preconcentration method obtaining recoveries in the range 96–100 %. Additionally, water samples, including mineral water, tap water, seawater, fountain water and river water, were spiked at two levels of concentration, 5 and 10 μg L−1, recoveries being in the range of 91–110 %, Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00, Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Silver nanocluster-based colorimetric/fluorimetric dual-mode sensor for the detection of bromide and sulfite in waters and wastewaters

  • Villarino García, Nerea
  • Lavilla Beltran, Maria Isela
  • Pena Pereira, Francisco Javier
  • Bendicho Hernandez, Jose Carlos
In this work, the development of a fluorimetric/colorimetric dual-mode nanosensor for the determination of sulfite and fluorimetric determination of bromide involving silver nanoclusters (AgNCs) is reported. SO2 and Br2 were found to significantly modify the optical properties of AgNCs. Particularly, both volatiles weakened the fluorescence of AgNCs, whereas a color change from nearly colorless to yellowish/brown occurred upon exposure of AgNCs to SO2. Accordingly, three smartphone-based optical assays were devised for sulfite and bromide determination, involving in situ volatile generation and enrichment/trapping of the selectively formed volatiles by AgNCs confined in a droplet and exposed to the headspace above the sample. A hydrophobized cellulose substrate acting as drop holder enabled integrating both the enrichment and the subsequent smartphone-based optical detection in a straightforward manner. Smartphone-based digitization of the enriched AgNCs microdrops and subsequent image processing using a smartphone and its integrated App, respectively, were used for quantitative purposes. Under optimal conditions, limits of detection (LODs) of 1.1 μM and 1.5 μM were achieved for the fluorimetric determination of sulfite and bromide, respectively, whereas sulfite was alternatively determined by colorimetric readout, yielding a LOD of 37.0 μM. The repeatability, expressed as relative standard deviation, was found to be in the range of 5.1–5.9 % in all cases (N = 8). The applicability of the method was demonstrated in aqueous samples of increasing complexity, with recoveries in the range 91–109 %. In addition, the responsiveness of AgNCs to SO2 and Br2 rendered them suitable for the monitoring of bromide and sulfite in increasingly relevant advanced reduction processes such as the UV/sulfite system, as demonstrated in this work., Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

A 2D microfluidic paper sensor for mercury speciation in fish based on the peroxidase-mimicking activity of l-cysteine-functionalized iron oxide nanoparticles

  • Abalde Pujales, Alberto
  • Villarino García, Nerea
  • Pena Pereira, Francisco Javier
  • Romero Rivas, Vanesa
A novel, field-deployable colorimetric assay based on a two-dimensional microfluidic paper-based analytical device (2D μPAD) was developed for on-site mercury speciation in fish samples. The device integrates L-Cysteine (L-Cys) functionalized iron oxide nanoparticles (Fe3O4@L-Cys NPs) that act as mercury-responsive nanozyme. In the presence of mercury species, L-Cys could be displaced from the Fe3O4 NPs' surface by a stronger L-Cys-Hg-LCys coordination complex. The uncoated Fe3O4 NPs reactivates the peroxidase-like activity of the nanozyme catalyzing the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide into bluecolored TMBox for quantitative readout. Speciation was performed directly on the 2D μPAD using a selective ethylenediaminetetraacetic acid (EDTA) masking step. The pre-deposited EDTA in the sample addition zone complexes inorganic mercury (Hg2+), preventing its interaction with the NPs, allowing the colorimetric signal to reflect only methylmercury (MeHg+). Under optimal conditions, the 2D μPAD enabled to monitor total mercury in a linear range of 25 to 200 μg L− 1 and MeHg+ in the range of 12.5 – 200 μg L− 1 . The developed assay showed limits of detection as low as 7.3 μg L− 1 and 3.6 μg L− 1 for total mercury and MeHg+, respectively, with a repeatability lower than 3.7 % (N = 5) in all cases. The developed 2D μPAD was applied to determine total mercury and MeHg+ in fish samples, yielding results consistent with the centralized Direct Mercury Analyzer method. The method was further validated using two certified reference materials, BCR-464 (tuna muscle) and DOLT-4 (dogfish liver), with measured values in good agreement with certified concentrations (t-test; p < 0.05)., Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

A perspective on current and future metric tools

  • Pena Pereira, Francisco Javier
  • Benedé, Juan L.
Assessment tools have attracted immense interest in the analytical field in recent years, and remarkable developments have been described toward increasing levels of refinement. However, substantial improvements of metric tools are still needed to obtain highly relevant information about analytical systems in an efficient manner while maintaining or increasing their user friendliness, minimizing their potential subjectivity, and ensuring a high reliability and comparability. The present perspective identifies areas of improvement of currently available metric tools and highlights potential initiatives to be tackled toward advanced metric tools, Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00, Agencia Estatal de Investigación | Ref. RED-2022-134079-T, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Colorimetric plasmonic sensing of formaldehyde by in situ formation of core-shell bimetallic gold–silver nanoparticles in liquid films

  • Villarino García, Nerea
  • Lavilla Beltrán, Maria Isela
  • Pena Pereira, Francisco Javier
  • Bendicho Hernández, Jose Carlos
Background: Plasmonic sensing approaches involving in-drop enrichment/sensing of volatiles have significantly improved the sensitivity and selectivity of noble metal nanoparticle (NP)-based analytical methods. Colloidal solutions act in these approaches both as acceptor phases and as recognizing elements for optical detection. However, the reduced surface area-to-volume (SA/V) ratio associated to the spherical configuration of NPscontaining microdrops hinders the mass transfer in the acceptor phase and thus results in suboptimal analytical performance. In this sense, the assessment of alternative geometries that could potentially enhance the mass transfer while ensuring ease of operation would be highly desirable. Results: The present work evaluates the suitability of liquid films of plasmonic NPs for enrichment/colorimetric sensing purposes. For this, the circular section of affordable stainless steel safety pins is employed as holder of stable microvolume films with enhanced SA/V ratio. As a proof of concept, liquid films of spherical gold NPs containing Tollens’ reagent have been evaluated as acceptor phases for formaldehyde enrichment and sensing via in situ formation of core-shell bimetallic gold-silver nanoparticles. The performance of the proposed approach has been compared with that of alternative LPME approaches, showing 2.2–3.0-fold higher enrichment factors and improved sensitivity. The method yielded a limit of detection of 56.7 nM and a repeatability of 6.8 % (N = 8) when a portable cuvetteless microvolume UV–vis spectrophotometric system was used, and has been successfully applied to the determination of formaldehyde in different waters and textile samples. Significance: The present study represents the first report that evaluates planar liquid films for simultaneous enrichment and optical sensing, and provides an effective and straightforward way to obtain liquid film-like configurations of variable volumes of acceptor phase for improved mass transfer. The proposed approach shows substantial potential for the development of sensors and nanosensors with enhanced sensitivity., Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

A 3D microfluidic paper-based analytical device with smartphone-based colorimetric readout for phosphate sensing

  • Graña Dosantos, José Manuel
  • Pena Pereira, Francisco Javier
  • Bendicho Hernández, Jose Carlos
  • De La Calle Gonzalez, Inmaculada
In this work, a 3D microfluidic paper-based analytical device (3D-µPAD) was developed for the smartphone-based colorimetric determination of phosphate in environmental samples. The assay relied on the formation of a blue-colored product (molybdenum blue) in the detection area of the 3D-µPAD upon reduction of the heteropolyacid H3PMo12O40 formed in the presence of phosphate. A number of experimental parameters were optimized, including geometric aspects of 3D-µPADs, digitization and image processing conditions, the amount of chemicals deposited in specific areas of the 3D-µPAD, and the reaction time. In addition, the stability of the device was evaluated at three different storage temperatures. Under optimal conditions, the working range was found to be from 4 to 25 mg P/L (12–77 mg PO4−3/L). The limits of detection (LOD) and quantification (LOQ) were 0.015 mg P/L and 0.05 mg P/L, respectively. The repeatability and intermediate precision of a 5 mg P/L standard were 4.8% and 7.1%, respectively. The proposed colorimetric assay has been successfully applied to phosphorous determination in various waters, soils, and sediments, obtaining recoveries in the range of 94 to 107%. The ready-to-use 3D-µPAD showed a greener profile than the standard method for phosphate determination, being affordable, easy-to-use, and suitable for citizen science applications., Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Multiplexed headspace paper-based analytical devices modified with silver nanoclusters for smartphone-based luminescent determination of inorganic preservatives in food samples

  • Villarino García, Nerea
  • Lavilla Beltrán, Maria Isela
  • Pena Pereira, Francisco Javier
  • Bendicho Hernández, Jose Carlos
Background: Reliable determination of inorganic chemical preservatives is essential for ensuring food safety, due to the health concerns associated to these compounds when present at excessive levels. Nitrite and sulfite, two inorganic preservatives widely used in the food industry, increasingly demand miniaturized alternatives to conventional analytical methods. In this regard, luminescent nanosensors are of particular relevance because of their superior sensitivity. However, further improvements are still needed to enhance their selectivity and multiplexing capability, while ensuring their applicability in the analysis of complex matrices. Results: The present study reports on the development of two paper-based analytical devices (PADs) involving luminescent silver nanoclusters (AgNCs) as sensing nanoreceptors for the simultaneous smartphone-assisted detection of sulfite and nitrite. The assays rely on the highly selective recognition of nitrogen oxides and sulfur dioxide by AgNCs protected with poly(methacrylate) and polyethylenimine, respectively, separately immobilized in the detection areas of PADs. Thus, in this work, AgNCs-containing PADs have been devised for the simultaneous determination of sulfite and nitrite involving in situ formation of the volatile derivatives and their selective trapping/interaction with the corresponding AgNCs nanoreceptors, leading to luminescence quenching. Two different configurations have been evaluated for the development of PAD-based nanosensors, namely in-vial PAD-based headspace microextraction (HS-PAD) and headspace 3D origami microfluidic PAD (HS-μPAD). Under optimal conditions, the developed assays showed limits of detection as low as 0.29 μM and 0.23 μM for sulfite and nitrite, respectively, for the HS-PAD approach, and 1.9 μM and 3.2 μM for the HS-μPAD configuration, with a repeatability expressed as relative standard deviation lower than 7.3 % (N = 8) in all cases. In addition, the developed PAD-based nanosensors were applied to the analysis of food samples, the results obtained showing excellent agreement with those obtained with reference methods. Significance: This article reports, for the first time, on the assessment of AgNCs with different responsiveness as luminescent nanoprobes for the development of multiplexed paper-based nanosensors with headspace sampling. The proposed assays enable decentralized, affordable and straightforward detection of sulfite and nitrite, being complementary in terms of sample consumption and sensitivity, and represent advantageous alternatives for quality control and safety monitoring in the food industry., Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

A 3D-microfluidic paper-based analytical device for the kinetic-catalytic colorimetric determination of vanadium with smartphone-based readout

  • Treviño, Estefanía
  • Villarino García, Nerea
  • Lavilla Beltrán, Maria Isela
  • Bendicho Hernández, Jose Carlos
  • Pena Pereira, Francisco Javier
Metal ion detection at trace levels remains challenging for paper-based analytical devices, as they often require preconcentration steps to reach low-ppb detection limits due to their limited sensitivity. This constraint reduces the overall simplicity and portability of paper-based devices, narrowing their suitability for truly filed-deployable analysis. A colorimetric kinetic-catalytic method in a three-dimensional origami microfluidic paper-based analytical device (3D-μPAD) is reported herein for the sensitive determination of vanadium. The method relies on the catalytic activity of vanadium in the oxidation of gallic acid by bromate in acidic media with formation of a colored product in the detection areas of the 3D-μPAD and smartphone-based readout. The proposed method was successfully employed using two different calibration modes (fixed-time and initial-rate), yielding limits of detection and quantification in the range 3.1-3.6 μg/L and 10.3-12.0 μg/L, respectively, with a repeatability and intermediate precision lower than 7.2% and 7.5%, respectively (expressed as relative standard deviation). The fixed-time and initial-rate methods showed sensitivities of 0.18 L/μg and 4.1·10−4 L/μg·s, respectively, working ranges up to 500 μg/L, and a sample throughput in the range of 48-96 h−1. The method was validated against six certified reference materials of diverse matrices (seawater, sediment, soil and industrial sludge), showing good agreement with the certified values at the 95% confidence level using both the fixed-time and the initial-rate methods (t-test; p < 0.05). The implementation of kinetic-catalytic reactions in μPADs is expected to enable further advances toward sensitive detection of metals., Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Recent advances in hydride trapping and optical detection in liquid and solid phases

  • De La Calle Gonzalez, Inmaculada
  • Romero Rivas, Vanesa
  • Bendicho Hernández, Jose Carlos
  • Lavilla Beltrán, Maria Isela
  • Pena Pereira, Francisco Javier
Hydride generation has been widely recognized as a robust and effective approach for the enhancement of sensitivity and selectivity in diverse analytical applications. This paper reviews recent advances in the determination of metal species after collection or trapping of volatile covalent hydrides in liquid and solid phases with both atomic and molecular optical detection, with a particular focus on studies reported over the decade 2016–2026. Special emphasis is placed on the configurations designed for hydride generation and volatile trapping strategies, evolving toward increasingly miniaturized and integrated systems, and particular attention is devoted to the mechanisms of hydrides recognition by molecular optical detection systems. Applications of the discussed approaches for the elemental and speciation analysis via hydride generation are presented, and the impact of potential interferences is also addressed. The increasing trend toward portable, straightforward, decentralized analytical approaches involving hydride generation suitable for non-expert users, is also highlighted, with some implementations being amenable for citizen science analysis. Finally, future developments and research needs in hydride generation and preconcentration are considered., Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00, Universidade de Vigo/CISUG