Skip to main content

ROBOTICA EN LA NUBE Y EL IMPACTO DE LAS REDES 5G EN LA FABRICA DEL FUTURO

RTI2018-099880-B-C31

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

V2X Support in 3GPP Specifications: from 4G to 5G and Beyond

  • Garcia-Roger, David
  • González-Malla, Edgar Emanuel
  • Martín-Sacristán, David|||0000-0002-7781-557X
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
[EN] The connected car concept is gaining momentum from the point of view, not only of research, but also of standardization and industrial development. Today there are many options for connecting a vehicle, in terms of to whom and how. In addition to making use of any conventional cellular technology, and connecting the vehicle to a base station or infrastructure element, vehicles can connect wirelessly and directly to each other using different technologies, both from the Institute of Electrical and Electronics Engineers (IEEE) and from the 3rd Generation Partnership Project (3GPP). This article offers a rigorous and detailed review of the system architecture aspects involved in the support of vehicular communications by the 3GPP fifth-generation (5G) standard, with special emphasis on its most recent iteration: Release 16., This work was supported in part by the European Union s H2020 project 5G-CARMEN under Grant 825012, and in part by the Ministerio de Ciencia e Innovación under Grant RTI2018-099880-B-C31.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Received power modelling in ultra-dense networks

  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
  • Calabuig Soler, Daniel|||0000-0003-0611-9902
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
  • Antón, Alejandro
  • Bazzi, Samer
  • Xu, Wen
[EN] In received power modelling for system level simulations, the relative orientation of the transmitter and receiver antennas are not generally considered. By doing that, a constant gain of the receiver antenna, independently of the angle of arrival, is implicitly assumed. This is usually of minor relevance for small or low-dense scenarios. However, in ultra-dense deployments, especially those based on cell-free massive multiple-input¿multiple-output architectures where users interact with all access points, the consideration of the antennas relative orientation comes to the forefront. In this paper, the impact of whether to take the receiver antenna gain into account or not for ultra-dense indoor environments with ceiling-mounted antennas are studied. A simple approach to take this gain into account using the antenna effective area is provided. Finally, this approach is compared with that based on antenna radiation patterns., The work of Danaisy Prado was supported by the H2020 Marie Curie Program, with Project Grant No. 766231 WAVECOMBE - ITN - 2017. This was also supported by the Spanish Ministry of Science, Innovation and University under the project RTI2018-099880-B-C31.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Millimeter-wave Human Blockage Model Enhancements for Directional Antennas and Multiple Blockers

  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
  • Inca-Sánchez, Saúl Adrián
  • Martín-Sacristán, David|||0000-0002-7781-557X
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
[EN] The Third Generation Partnership Project (3GPP) has defined a blockage model as an add-on feature to the channel model used in its evaluations of the physical layer in the 0.5-100 GHz frequency range. This letter focuses on the human body blockage losses in the millimeter-wave band proposing: (i) a new criterion to place the diffraction points over the edges of the blockers that considers the precise position of the blocker with regard to the line-of-sight between the transmitter and the receiver, (ii) a specific criterion to determine which potential blockers, from a set of human bodies present in a certain scenario, should be considered effective blockers given the positions of a transmitter, a receiver, and those bodies, and (iii) a modification of the model to provide more accurate estimations in the case in which several blockers are closely located. The validity of our criteria and the accuracy improvement are confirmed by a set of measurements performed at 30 GHz with directional antennas and with multiple human blockers in different positions., The work of Danaisy Prado-Alvarez was supported by the H2020 Marie Curie Program, with Project Grant No. 766231 WAVECOMBE-ITN-2017. Part of this work has been performed in the framework of the H2020 project 5G-SMART co-funded by the EU. This was also supported by the Spanish Ministry of Science, Innovation and University under the project RTI2018-099880-B-C31. The associate editor coordinating the review of this letter and approving it for publication was J. Choi.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Breathing on UWB Propagation Characteristics for Ingestible and Implantable Devices

  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Fornés Leal, Alejandro|||0000-0001-5914-6045
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
  • Frasson, Matteo
  • Pons Beltran, Vicente
[EN] Wireless in-body devices are those in which a medical sensor is introduced-implanted or ingested- inside the human body and communicates with a remote node. Some in-body applications demand high data rates, so ultrawideband (UWB) spectrum has been proposed as a good candidate because of its large bandwidth available. Besides, breathing can lead to internal movement of the torso and consequently, of devices installed in this area. Thus, the radio channel performance can be affected by such movement leading to a malfunction of the radio interface of the medical device. This work aims at analyzing the effect of breathing on the propagation channel by means of in vivo measurements in living animal models. Continuous wave (CW) measurements have been carried out for live different frequencies in the lower part of the UWB band, and the effects of breathing on the relative received power (module and phase) are analyzed and discussed, This work was supported in part by the Ministerio de Ciencia e Innovacion under Grant RTI2018-099880-B-C31 and in part by the Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia through the Colorrectal Diagnosis of Tumours Based on EM Properties (COLODEM) Project under Grant PAID-06-18 (First Research Projects)