Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Urban form and vacant shops: can one explain the other? – a case study in Portugal

  • Saraiva, Miguel
  • Marques, Teresa
  • Pinho, Paulo
[EN] Shopping is much more than a wealth-generator in post-modern societies; it is intrinsically linked with the way people experience the city and an indivisible part of their day-to-day social experiences. Consequently, the literature has gradually recognized that commercial geographies are not just a consequence of economic market logics. It has been proven that there is a relationship between store-types and urban morphology, and that commerce is an important catalyst for urban regeneration and revitalization. Thus, the urban form can also be a cause for the lack of success of a shop. The amount of vacant shops has been signaled as an important problem in urban areas, affecting the structure and the identity of neighborhoods, and reflects the negative effects of the economic-crisis. Strategies to overcome this problem are usually economically-oriented and fail to capitalize on the new-found relationships between store-success and urban morphology. Thus this research wishes to test whether there are indeed correlations between specific morphological features and the existence of vacant shops, and consequently to propose how changes in the urban environment can contribute to overcome, and even prevent, such cases. The geographical distribution of vacant shops in a sample of Portuguese cities was set against morphological variables such as building age or centrality in the network (Space Syntax). Positive association was found, for example, between new developments and vacant shops, questioning the need for more store space in certain areas; and, particularly outside central neighborhoods, between open shops and high ‘choice’ (rather than high ‘integration’) segments., This work was supported by the Portuguese Foundation for Science and Technology under Grant SFRH / BD / 45205 /2008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Male infertility diagnostic laboratories during COVID-19 pandemic: development of a novel teaching/learning strategy

  • Santiago, Joana
  • Corda, Pedro
  • Fardilha, Margarida
[EN] Objective: To design and implement a laboratory teaching/learning strategy applied to male infertility diagnostic during COVID-19 pandemic. Methods: Seventy-five students attending Module 3 (M3): Male Infertility Diagnostic Laboratories, of curricular unit Laboratories in Biomedicine 5 were divided into 8 groups to reduce students’ number in class. M3 was organized in 2 Wet labs (WL; laboratory training) and 2 Dry labs (DL; theoretical-practical classes). At the end of M3, students completed a satisfaction survey. Results: Results showed that most students were satisfied with topics addressed, time dedicated outside the class, evaluation, and overall organization of WL and DL. The protocols provided and general conditions of WL were considered satisfactory. Only positive classifications were attributed to the learning goals, relevance of knowledge acquired, and opportunities to ask about evaluation. Qualitative data suggested that the dynamics, innovation, and organization of classes, allied to the knowledge and motivation of professors, provided the appropriate learning environment. Conclusions: The methodology implemented in M3 during COVID-19 pandemic represents a valid strategy to encourage and motivate students learning, stimulate teamwork, communication, and autonomy in the laboratory. Preparing dynamic, attractive, and motivating classes increases student's general satisfaction, improving the efficiency of the learning/teaching process., The authors thank the DCM, UA for the infrastructure support, and the support from FCT of the Portuguese Ministry of Science and Higher Education to J.S. (SFRH/BD/136896/2018) and P.C. (2020.10111.BD). The authors deeply acknowledge the students of the curricular unit Laboratories of Biomedicine 5 of the Biomedical Sciences degree of the UA (class 2020/2021) for being highly motivated and for motivating the professors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Betão de alta resistência reforçado com fibras exposto a elevadas temperaturas

  • Cunha, Vítor
  • Al-Rikabi, Taghreed
  • Barros, Joaquim
[PT] Atualmente, a utilização de betões de elevada resistência tem vindo a aumentar, nomeadamente, em aplicações com requisitos especiais, tais como arranha-céus, torres eólicas, centrais nucleares, etc. No entanto, com o aumento significativo da resistência, este tipo de material desenvolve um comportamento significativamente mais frágil. Adicionalmente, quando expostos a elevadas temperaturas, como no caso de incêndio, dependendo da temperatura e tempo de exposição poder-se-á verificar uma diminuição significativa da resistência à compressão, fissuração bem como uma rotura explosiva. Neste trabalho apresentam-se e discutem-se os resultados do estudo da influência da temperatura no comportamento mecânico de microbetão de alta resistência reforçado com fibras de aço. Diversos provetes de betão de elevada resistência foram expostos a distintas temperaturas durante um período superior a uma hora, designadamente, 400, 500, 600 e 700 ºC. O comportamento mecânico, após exposição às diferentes temperaturas, foi avaliado através de ensaios de compressão, flexão e tração uniaxial e posteriormente comparado com o betão de referência (exposto à temperatura ambiente). Na generalidade, as propriedades mecânicas do betão de alta resistência diminuíram com o aumento da temperatura. Verificou-se um decréscimo mais acentuado da resistência à compressão, tração uniaxial e tração em flexão para temperaturas superiores a 400ºC, Os autores agradecem às empresas Zhejiang Boen e MAPEI pelo fornecimento gratuito, respetivamente, das fibras de aço e sílica de fumo. A segunda autora gostaria de agradecer a bolsa obtida no âmbito do programa Erasmus Mundus - Marhaba Project. Os autores agradecem o financiado por fundos FEDER através do Programa COMPETE e fundos Nacionais FCT dos projetos PTDC/ECM-EST/2635/2014 e SFRH/BSAB/114302/2016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

How to motivate students to learn Metabolic Biochemistry in a Biomedical Sciences curricula

  • Carvalho Henriques, Magda
  • Fardilha, Margarida
[EN] Teaching methodologies used in biochemistry classes at the University level are traditionally dependent on theorical classes. The assessment is usually based on written tests performed at the end of the semester. However, most students who learn metabolism by this traditional method consider the study of metabolic biochemistry a terrifying and unforgettable experience. Understanding biochemical metabolic pathways was the proposed goal of the Medical Biochemistry curricular unit. To this end, the multi-method active learning approach was used in order to increase students’ motivation towards the learning process and to allow the development of skills associated with group conflict resolution, critical thinking and communication skills. Overall, students and learning facilitators were highly motivated by the diversity of learning activities, particularly due to the emphasis on correlating theoretical knowledge with human health and disease. As a quality control exercise, the students were asked to answer a questionnaire on their evaluation of the teaching/learning experience. Thus, the initial analysis of the student’s perception questionnaires permits to conclude that the approach undertaken yields results that surpass the traditional teaching methods. Investing in preparing attractive and motivating classes increases students and teacher’s general satisfaction and the learning/teaching process becomes more efficient., This work was also supported by an individual grant from FCT of the Portuguese Ministry of Science and Higher Education to M.C.H (SFRH/BD/131846/2017).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Time Resolved Infrared Analysis of Droplet Impacts onto Heated Surfaces Under Extreme Wetting Scenarios, Time resolved thermographic analysis of droplet impacts onto heated surfaces under extreme wetting scenarios

  • Pontes, Pedro
  • Teodori, Emanuele
  • Moita, Ana
  • Moreira, António
[EN] The present paper explores the use of time resolved infrared IR thermography combined with high-speed imaging to describe the liquid-surface interfacial heat transfer phenomena occurring at droplet/wall interactions. Custom made calibration and post-processing methods are proposed and discussed. The results show that the methodology proposed captures very well particular details on droplet dynamics and heat transfer, allowing to identify air bubble trapping at the impact region as well as the temperature variations at the formation of the rim. Furthermore, the calibration proposed here allowed amending some physically incorrect results that were often obtained with the IR camera’s default calibration. The combined analysis of droplet dynamics (e.g. the spreading factor) with the radial temperature profiles, heat flux and cooling effectiveness computation allowed establishing qualitative and quantitative trends on the effect of various parameters on the heat transfer occurring at droplet/wall interactions. Particularly, the effect of the initial surface temperature is observed to play a minor role, as long as it is low enough to prevent the occurrence of boiling. On the other hand, extreme wetting scenarios, such as superhydrophobicity limit the heat transfer between the spreading droplet and the surface. However, the thermal analysis reveals that a major reason for this is not related to the reduced contact time of the droplet on the surface (due to rebound) or air entrapment, but is rather associated to the reduced wetted area caused by the high contact angles., The authors are grateful to Fundação para a Ciência e Tecnologia (FCT) for partially financing the research under the framework of the project RECI/EMS-SIS/0147/2012 and for supporting P. Pontes with a research fellowship. A. S. Moita acknowledges FCT for financing her contract through the IF 2015 recruitment program (IF 00810- 2015) and E. acknowledges FCT for supporting his PhD fellowship (SFRH/BD/88102/2012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Experimental and numerical study on sensible heat transfer at droplet/wall interactions

  • Teodori, Emanuele
  • Pontes, Pedro
  • Moita, Ana
  • Moreira, António
  • Georgoulas, Anastasios
  • Marengo, Marco
[EN] The present study addresses a detailed experimental and numerical investigation on the impact of water droplets on smooth heated surfaces. High-speed infrared thermography is combined with high-speed imaging to couple the heat transfer and fluid dynamic processes occurring at droplet impact. Droplet spreading (e.g. spreading ratio) and detailed surface temperature fields are then evaluated in time and compared with the numerically predicted results. The numerical reproduction of the phenomena was conducted using an enhanced version of a VOFbased solver of OpenFOAM previously developed, which was further modified to account for conjugate heat transfer between the solid and fluid domains, focusing only on the sensible heat removed during droplet spreading. An excellent agreement is observed between the temporal evolution of the experimentally measured and the numerically predicted spreading factors (differences between the experimental and numerical values were always lower than 3.4%). The numerical and experimental dimensionless surface temperature profiles along the droplet radius were also in good agreement, depicting a maximum difference of 0.19. Deeper analysis coupling fluid dynamics and heat transfer processes was also performed, evidencing a strong correlation between maximum and minimum temperature values and heat transfer coefficients with the vorticity fields in the lamella, which lead to particular mixing processes in the boundary layer region. The correlation between the resulted temperature fields and the droplet dynamics was obtained by assuming a relation between the vorticity and the local heat transfer coefficient, in the first fluid cell i.e. near the liquid-solid interface. The two measured fields revealed that local maxima and minima in the vorticity corresponded to spatially shifted local minima and maxima in the heat transfer coefficient, at all stages of the droplet spreading. This was particularly clear in the rim region, which therefore should be considered in future droplet spreading models., The authors are grateful to Fundação para a Ciência e Tecnologia (FCT) for partially financing the research under the framework of the project RECI/EMS-SIS/0147/2012 and for supporting P. Pontes with a research fellowship. A. S. Moita acknowledges FCT for financing her contract through the IF 2015recruitment program (IF 00810-2015) and E. acknowledges FCT for supporting his PhD fellowship (SFRH/BD/88102/2012).