Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supplementary information for Tuning the activity and selectivity of CuPt/C catalysts for the electrochemical CO2 reduction [Dataset]

  • Gutiérrez Roa, Manuel
  • Sebastián del Río, David
  • Guzmán, Hilmar
  • Zammillo, Federica
  • Hernández, Simelys
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
Under a Creative Commons license BY-NC 4.0., Figure S1. Particle size distribution for Cu/C, CuPt-99:1/C, and CuPt 95:5/C electrocatalysts; Figure S2. STEM images with corresponding EDX spectra showing elemental counts for Cu/C, CuPt 99:1/C, and CuPt 95:5/C electrocatalysts; Figure S3. AC-HAADF-STEM of a CuPt nanoparticles for CuPt-99:1/C and the corresponding EDX elemental mapping images where Cu and Pt are displayed as blue and yellow colours, respectively; Figure S4. High-resolution XPS spectra of the Cu 2p3/2 region for the CuPt/C catalysts and the monometallic Cu/C; Figure S5. LSVs at 10 mV s-1 of CuPt/C, Cu/C, and commercial Pt/C catalysts in N2 saturated 0.1 M KHCO3; Figure S6. Electrochemical oxidation of adsorbed species derived from CO2 (green lines) or CO (blue lines) reduction at -0.6 V vs. RHE. CVs performed in a potential window excluding CO2RR with the electrolyte saturated with N2 (black line) are also included; Figure S7. Selectivity to CO2RR products in the CuPt-90:10/C and CuPt 75:25/C catalysts at the potentials analysed; Figure S8. CO2RR stability measurements at -0.6 V vs. RHE in CO2-saturated 0.1 M KHCO3 under continuous carbon dioxide bubbling for CuPt-99:1/C and monometallic Cu/C.Table S1. (a) Surface compositions (at.% and wt.%) from XPS. (b) Relative contribution of Cu(0) + Cu(I) and Cu(II) (at.%) from the deconvolution of Cu 2p3/2 and relative contributions normalized to (Cu/(Cu+Pt))XPS. (c) Relative platinum contributions (at.%) from the deconvolution of Pt 4f and relative contributions normalized to (Pt/(Cu+Pt))XPS., Authors acknowledge Grant PID2020–115848RB-C21 “STORELEC” project funded by MICIU/AEI/10.13039/501100011033 and Grant CNS2023–144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors also acknowledge Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Sara Pérez-Rodríguez thanks Grant IJC2019–041874-I funded by the MICIU/AEI/10.13039/501100011033. Manuel Gutiérrez-Roa acknowledges Universidad de Zaragoza, Fundación Ibercaja and Fundación CAI for the financial support IT 11/23 and Programa Iberus+ : Movilidad para doctorandos for his mobility grant. Simelys Hernández acknowledges the project CO2Synthesis (ID ROL: 67910) funded by Fondazione Compagnia di San Paolo in the Call Trapezio - Linea 1. Federica Zammillo and Mario Gallone thanks Fondazione CRT for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supplementary material for Boosting the oxygen reduction electrocatalytic performance of grape stem-derived N-doped activated carbons via (hydro)thermal annealing [dataset]

  • Vela, Irene
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
Under a Creative Commons BY NC 4.0 license, Table S1. Proximate analysis (wt.%), CHNS composition (wt.%) from EA of GS. In the case of GS, the ashes were also analysed by ICP (wt.%); Table S2. CHNS composition (wt.%) from EA and surface N content (wt.% and at.%) from XPS of GS-derived carbon materials; Table S3. Textural parameters of GS-derived carbon materials; Table S4. Electrochemical ORR parameters obtained for GS-derived carbon materials in O2-saturated 0.1 M KOH at 1600 rpm; Table S5. Elemental composition (wt.%) by ICP of GS and N-doped activated carbons; Figure S1. SEM images of a, b) CN-GS, c, d) CN-HGS, and e, f) CN-HGS-CO2; Figure S2. SEM image and corresponding EDX mapping of C, N and O for CN-HGS-CO2; Figure S3. a) XRD pattern and b) Raman spectra of CN-HGS-CO2, and c) XRD pattern and d) Raman spectra of CN-HGS-CO2-L-1000; Figure S4. a) CVs at 20 mV s-1 in N2-saturated 0.1M KOH for N-doped GS-derived carbon materials. b) comparison of the CV at 5 mV s-1 in N2- and O2-saturated electrolyte for CN-HGS-CO2; Figure S5. H2O2 yield (%) vs potential curves at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for N-doped GS-derived carbon materials; Figure S6. a) Number of electrons (n) vs potential curves, and b) H2O2 yield (%) vs. potential curves at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for C-HGS-CO2 and CN-HGS-CO2; Figure S7. Tafel plot of C-GS, CN-GS, CN-GS-CO2 and CN-HGS. 1600 rpm, 5 mV s-1, O2-saturated 0.1M KOH; Figure S8. Influence of HCl treatment for CN-HGS-CO2: a) LSV at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for CN-HGS-CO2 and CN-HGS-CO2-L, and b) the corresponding number of electrons vs potential curves and c) H2O2 yield (%) vs potential curves. Figure S9. a) Tafel plots, b) number of electrons (n) vs potential curves, and c) H2O2 yield (%) vs potential curves of CN-HGS-CO2, CN-HGS-CO2-L-1000, CN-HGS-CO2-1000 and Pt/C. 1600 rpm, 5 mV s-1, O2-saturated 0.1M KOH; Figure S10. a) Nyquist plots at E1/2 and 1600 rpm in O2-saturated 0.1 M KOH for CN-HGS-CO2 and CN-HGS-CO2-L-1000; b) methanol tolerance for CN-HGS-CO2-L-1000: LSV at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH before and after the addition of an aliquot of methanol (0.5M CH3OH); Figure S11. a) Current retention during chronoamperometric test at 0.7 V vs RHE in O2-saturated 0.1 M KOH of CN-HGS-CO2-L-1000; b) Cyclic voltammogram at 20 mV s-1 in N2-saturated 0.1 M KOH before and after chronoamperometric test. c) LSV at 1600 rpm before and after accelerated stress test (AST: 1000 cycles from 0.6 to 1.0 V vs. RHE at 50 mV s-1 V vs RHE in O2-saturated 0.1 M KOH of CN-HGS-CO2-L-1000; d) Cyclic voltammogram at 20 mV s-1 in N2-saturated 0.1 M KOH before and after AST; Figure S12. (Left) onset potential and half-wave potential (E1/2) and (right) electron-transfer number (n) as a function of the relative contribution of graphitic nitrogen, pyrrolic nitrogen and pyridinic nitrogen for CN-GS-CO2, CN-GS-CO2-L-1000, CN-HGS-CO2 and CN-HGS-CO2-L-1000; Figure S13. Influence of hydrothermal processing in CN-HGS-CO2-L-1000: a) LSV at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for CN-HGS-CO2-L-1000 and CN-GS-CO2-L-1000, b) the corresponding number of electrons vs potential curves, and c) H2O2 yield (%) vs potential curves; Figure S14. Comparison of the electrocatalytic performance (E1/2) and N speciation (graphitic-N/pyrrolic-N ratio) of CN-HGS-CO2-L-1000 with those of other biomass-derived N-doped activated carbons from the literature; Figure S15. (Left) onset potential and half-wave potential (E1/2) and (right) electron-transfer number (n) as a function of the surface amount of nitrogen determined by XPS for CN-GS-CO2, CN-GS-CO2-L-1000, CN-HGS-CO2 and CN-HGS-CO2-L-1000. Figure S16. (Left) onset potential and half-wave potential (E1/2) and (right) electron-transfer number (n) as a function of ABET for CN-GS-CO2, CN-GS-CO2-L-1000, CN-HGS-CO2 and CN-HGS-CO2-L-1000., This work was supported by CNS2023-144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors acknowledge Grant PID2023-150998OB-I00 funded by MICIU/AEI/10.13039/501100011033 and co-funded by ERDF “A way of making Europe” and by ESF+. Authors also acknowledge the Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Irene Vela thanks Gobierno de Aragón for her predoctoral grant (E-50–2025–0102958)., Peer reviewed