Skip to main content

LA CONSERVACION DE LOS METALES EN EL PATRIMONIO CIENTIFICO-TECNICO

HAR2017-89911-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Design and validation of tailored colour reference charts for monitoring cultural heritage degradation [Dataset]

  • Ramírez Barat, Blanca
  • Cano Díaz, Emilio
  • Molina Delgado, M. Teresa
  • Barbero-Álvarez, Miguel Antonio
  • Rodrigo, Juan Antonio
  • Menéndez, José Manuel
Data are distributed in two folders, including a) colorimetric measurements: Colorimetric data obtained with a Konica Minolta spectrophotometer CM-700-d with 6 mm diameter mask D65 as illuminant and at 10 degrees to the observer, in colour space L*a*b* : 1. Color reference charts printed on four different substrates: acid free paper, laminated acid free paper, Forex and Glasspack, artificially aged in a Q-Lab QUV equipment, according to ISO4892-3 standard. 2. Metal coupons (silver and copper), freshly polished and after several months’ exposure in an indoor museum environment. b) Materials datasheets: Datasheets of papers and inks used to print color charts Research project: This data belongs to the research project “Monitorización por procesado de imagen y ciencia ciudadana para la conservación de materiales del patrimonio cultural (MIPAC-CM)”. Y2018/NMT-4913 IP: Emilio Cano (ecano@cenim.csic.es) IP2: José Manuel Menéndez, This work has been funded by Comunidad de Madrid, European Regional Development Fund and European Social Fund, project MIPAC-CM (Y2018/NMT-4913); and Ministerio de Ciencia, Innovación y Universidades, project COMPACT (HAR2017-89911-R) and grant PRE2018-86667., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for the paper: Protective coatings on metals found in scientific-technical collections: the collection of the Spanish National Museum of Science and Technology (MUNCYT)

  • Molina Delgado, M. Teresa
  • Cano Díaz, Emilio
  • Fort González, Rafael
  • Álvarez de Buergo, Mónica
  • Ramírez Barat, Blanca
The study was carried out in two parts, the first concerned the characterisation of the objects in the MUNCYT collection. The different metals were characterised with XFR and their original coatings with FTIR. These data can be found in the folder "Characterisation of MUNCYT objects". The second part is about the application and evaluation of the 8 coatings described in the abstract on bare steel and brass coupons. These coatings were exposed to accelerated ageing (condensation and UVA radiation) for a total of 336 hours, with an interruption in the middle of the test. The performance of the coatings was therefore monitored at time 0, time 168 hours and 336 hours. The data of this part can be consulted in the folder "Coatings evaluation", where the subfolders corresponding to each analysis technique used during the different ageing times can be found. All files are in open extensions such as .txt; .dpt and .xlsx and are protected by a Creative Commons Attribution 4.0 International (CC BY 4.0) licence., [EN] This is the experimental dataset used in the paper: Protective coatings on metals found in scientific-technical collections: the collection of the Spanish National Museum of Science and Technology (MUNCYT). This data presents results on the protective properties of different coatings over metals -bare brass and steel- representative of those found in scientific-technical heritage collections. After a previous examination of several objects to characterise the metals and alloys in the collection of the Spanish National Museum of Science and Technology (MUNCYT), an evaluation of protective coatings has been done. Specifically, Paraloid B-44, B-48, B-67, B-72, Incralac, Cosmolloid H80, double layer of B-72+H80 and shellac have been studied to make a first screening in order to select the most promising candidates for each case and determine the most appropriate methodology and key factors for the study. Coatings have been applied on clean metal surfaces and aged up to 336 hours, by cycles of UV light and water condensation at elevated temperatures. Changes in the aspect of the coupons has been assessed by visual examination, optical microscopy and colorimetric measurements. EIS has been used for a quantitative evaluation of the protective properties and FTIR to measure chemical changes of the layers, allowing to follow, understand and compare the behaviour of the different coatings and substrates upon artificial ageing., [ES] Este es el conjunto de datos experimentales utilizado en el artículo: Recubrimientos protectores sobre metales encontrados en colecciones científico-técnicas: la colección del Museo Nacional de Ciencia y Tecnología de España (MUNCYT). Estos datos presentan resultados sobre las propiedades protectoras de diferentes recubrimientos sobre metales -bronce y acero- representativos de los encontrados en colecciones de patrimonio científico-técnico. Tras un examen previo de varios objetos para caracterizar los metales y aleaciones de la colección del Museo Nacional de Ciencia y Tecnología (MUNCYT), se ha realizado una evaluación de los recubrimientos protectores. En concreto, se han estudiado Paraloid B-44, B-48, B-67, B-72, Incralac, Cosmolloid H80, doble capa de B-72+H80 y goma laca para realizar una primera criba con el fin de seleccionar los candidatos más prometedores para cada caso y determinar la metodología y factores clave más adecuados para el estudio. Los recubrimientos se han aplicado sobre superficies metálicas limpias y se han envejecido hasta 336 horas, mediante ciclos de luz UV y condensación de agua a temperaturas elevadas. Los cambios de aspecto de los cupones se han evaluado mediante examen visual, microscopía óptica y mediciones colorimétricas. Se ha utilizado EIS para una evaluación cuantitativa de las propiedades protectoras y FTIR para medir los cambios químicos de las capas, lo que ha permitido seguir, comprender y comparar el comportamiento de los diferentes recubrimientos y sustratos tras el envejecimiento artificial., This work has been funded by MCIN/AEI /10.13039/501100011033 and “ERDF A way of making Europe”, under the project COMPACT (HAR2017-89911-R) and the predoctoral grant PRE2018-086667 additionally funded by “ESF Investing in your future”. It is also been funded by the Community of Madrid and the European Social Fund, under the TOP Heritage-CM programme (P2018/NMT-4372)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for the paper: Testing protective coatings for metal conservation: the influence of the application method

  • Molina Delgado, M. Teresa
  • Cano Díaz, Emilio
  • Ramírez Barat, Blanca
The experimental data used are classified in zip folders according to the results of the analyses carried out for the paper: thickness measurements, visual appearance, microscope photos, EIS data, Raman and climatic conditions used during the coating application and drying process. These folders are subdivided into others depending on the coating and/or ageing time carried out. It is recommended to read the paper beforehand in order to have a better understanding and location of the data. All files are in open extensions and are protected by a Creative Commons Attribution 4.0 International (CC BY 4.0) licence., [EN] This is the experimental dataset used in the paper: Testing protective coatings for metal conservation: the influence of the application method. This data presents results on the effect that methodology application variables can have on the protective capacity of the coatings. The influence of the thickness, number of layers and drying time of Paraloid B72, C80 microcrystalline wax and Incralac on bare steel coupons on the performance of the coatings has been evaluated with techniques such as: electrochemical impedance spectroscopy (EIS), a reflected light metallurgical microscope and electromagnetic induction thickness probe. It has been shown that the number of layers is not always proportional to the thickness of the coating and that after accelerated ageing, some coatings that had been left to dry for 14 days, have a better protective capacity than those that were left to dry for less time., [ES] Este es el conjunto de datos experimentales utilizado en el artículo: Pruebas de recubrimientos protectores para la conservación de metales: la influencia del método de aplicación. Estos datos presentan resultados sobre el efecto que las variables de aplicación de la metodología pueden tener en la capacidad protectora de los recubrimientos. Se ha evaluado la influencia del espesor, número de capas y tiempo de secado de Paraloid B72, cera microcristalina C80 e Incralac sobre cupones de acero desnudo en el comportamiento de los recubrimientos mediante técnicas como: espectroscopia de impedancia electroquímica (EIS), microscopio metalúrgico de luz reflejada y sonda de espesores por inducción electromagnética. Se ha demostrado que el número de capas no siempre es proporcional al espesor del recubrimiento y que, tras un envejecimiento acelerado, algunos recubrimientos que se habían dejado secar durante 14 días, tienen una mejor capacidad protectora que los que se dejaron secar durante menos tiempo., This work has been funded by MCIN/AEI /10.13039/501100011033 and “ERDF A way of making Europe”, under the project COMPACT (HAR2017-89911-R) and the predoctoral grant PRE2018-086667 additionally funded by “ESF Investing in your future”. It is also been funded by the Community of Madrid and the European Social Fund, under the TOP Heritage-CM programme (P2018/NMT-4372)., Peer reviewed