DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication
Artículo científico (JournalArticle)
Evaluation of One- and Two-Box Models as Particle Exposure Prediction Tools at Industrial Scale
One- and two-box models have been pointed out as useful tools for modelling indoor particle exposure. However, model performance still needs further testing if they are to be implemented as trustworthy tools for exposure assessment. The objective of this work is to evaluate the performance, applicability and reproducibility of one- and two-box models on real-world industrial scenarios. A study on filling of seven materials in three filling lines with different levels of energy and mitigation strategies was used. Inhalable and respirable mass concentrations were calculated with one- and two-box models. The continuous drop and rotating drum methods were used for emission rate calculation, and ranges from a one-at-a-time methodology were applied for local exhaust ventilation efficiency and inter-zonal air flows. When using both dustiness methods, large differences were observed for modelled inhalable concentrations but not for respirable, which showed the importance to study the linkage between dustiness and processes. Higher model accuracy (ratio modelled vs. measured concentrations 0.5–5) was obtained for the two- (87%) than the one-box model (53%). Large effects on modelled concentrations were seen when local exhausts ventilation and inter-zonal variations where parametrized in the models. However, a certain degree of variation (10–20%) seems acceptable, as similar conclusions are reached., This research was funded by the Spanish MINECO (CGL2015-66777-C2–1-R, 2-R and 679 RTI2018-098095-B-C21) and Danish Government (FFIKA, Focused Research Effort on Chemicals in 680 the Working Environment). Additional support was provided by the Spanish Ministry of Science and Innovation (Project CEX2018-000794-S), Generalitat de Catalunya AGAUR 2017 SGR41, and 682 FEDER (European Regional Development Fund) “Una manera de hacer Europa”., Peer reviewed
Project:
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 CGL2015-66777-C2–1-R
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 2-R
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 679 RTI2018-098095-B-C21
,
CEX2018-000794-S
View at: http://hdl.handle.net/10261/249257