BUSCADOR RECOLECTA

This dataset consists of three images resulting from a sandbox analog modeling experimental program. Sandbox analog modeling of tectonic processes is an experimental technique aiming to simulate and study natural geological processes by means of scaled models. Experimental models are scaled in dimensions, time and rheology, by using different analog materials such as colored sand or silicone. Models are performed in sandboxes that contain the analog materials. These analog materials are deformed according to specific testing parameters. At the end of the experiments, models are consolidated and sliced, and these slices photographed (sections). The figures in this dataset represent the uninterpreted sections of three sandbox analog models that experimentally simulate a salt-bearing rifted margin, a salt-bearing rifted margin incorporated into fold-and-thrust belt and a salt-bearing rifted margin incorporated into fold-and-thrust belt that grown coeval with surface processes (erosion and sedimentation). The experimental program was executed at the GEOMODELS Analogue Modelling Laboratory at the University of Barcelona.

MRAMA: Mètodes ràpids i automatització en microbiologia alimentària / Métodos rápidos y automatización en microbiología alimentaria / Rapid methods and automation in food microbiology, Ampliar y difundir los conocimientos teóricos y prácticos sobre métodos innovadores para detectar, contar, aislar y caracterizar rápidamente los microorganismos, y sus metabolitos, habituales en los alimentos y el agua., (English) To broaden and spread the theoretical and practical knowledge about innovative methods for rapid detection, enumeration, isolation and characterization of foodborne and waterborne microorganisms and their products.

The dataset is freely available on the web repository of the Spanish National Research Council (CSIC) in three different formats (NetCDF, binary raster, and plain text)., Format: netcdf The netcdf archive is composed of 96 zipped files containing the spei dataset from 1901 to 2006 at 1 to 48 months time scales, separated for the East hemisphere (i.e. Europa, Africa, Asia and Australia) and the West hemisphere (the Americas). Each zipped file contains one single netCDF file (.nc), i.e. no header files are necessary because all necessary meta-data are self-contained in the .nc file. Naming convention spei_[tempscale]_[hemisphere].zip, where [tempscale] is a number between 1 and 48 indicating the temporal scale of the index (months), and [hemisphere] indicates the fraction of the World covered and can have values eh (East hemisphere) or wh (West hemisphere). Example: spei_12_eh.zip, The Global 0.5° gridded SPEI dataset is made available under the Open Database License. Any rights in individual contents of the database are licensed under the Database Contents License. Users of the dataset are free to share, create and adapt under the conditions of attribution and share-alike. Use of the newest version is recommended. Older versions are still available to allow replicability., All currently available gridded drought datasets at continental and global scales are based on either the PDSI or the sc-PDSI. A new global drought dataset based on the Standardised Precipitation-Evapotranspiration Index (SPEI) has been developed, which covers time scales from 1-48 months at a spatial resolution of 0.5°, and provides temporal coverage for the period 1901-2006. This dataset represents an improvement in spatial resolution and operative capability of previous gridded drought datasets based on the PDSI, and enables identification of various drought types., A monthly global dataset of a multiscalar drought index is presented and compared in terms of spatial and temporal variability with the existing continental and global drought datasets based on the Palmer drought severity index (PDSI, scPDSI). The new dataset is based on the standardized precipitation evapotranspiration index (SPEI). The index was obtained from the CRU TS3.0 data, covering time scales from 1 to 48 months for the period 1901-2006, and has a spatial resolution of 0.5°. The advantages of the new dataset are that: i) it improves the spatial resolution of the unique global drought dataset at a global scale; ii) it is spatially and temporally comparable to other datasets, given the probabilistic nature of the SPEI, and, in particular; iii) it enables identification of various drought types, given the multiscalar character of the SPEI. More details at: http://www.eead.csic.es/spei/spei.html, Peer reviewed

The dataset is freely available on the web repository of the Spanish National Research Council (CSIC) in three different formats (NetCDF, binary raster, and plain text)., Format: raw binary. The raw binary archive is composed of 576 zipped files, corresponding to the SPEI index at time scales between 1 and 48 months for the whole World and divided by decades (except the last file, containing only data for the period 2001-2006). Each zipped file contains three files, one with the data itselt (.img), and two headers (.doc and .hdr). The information contained in the header files is equivalent, and allows direct access to the data using some widely used commercial programs. Naming convention: spei[tempscale]_[decade].zip, where [tempscale] is a number between 1 and 48 indicating the temporal scale of the index (months), and [decade] indicates the years of data contained in the file. Example: spei12_1910-1919.zip. All currently available gridded drought datasets at continental and global scales are based on either the PDSI or the sc-PDSI. A new global drought dataset based on the Standardised Precipitation-Evapotranspiration Index (SPEI) has been developed, which covers time scales from 1-48 months at a spatial resolution of 0.5°, and provides temporal coverage for the period 1901-2006. This dataset represents an improvement in spatial resolution and operative capability of previous gridded drought datasets based on the PDSI, and enables identification of various drought types. A monthly global dataset of a multiscalar drought index is presented and compared in terms of spatial and temporal variability with the existing continental and global drought datasets based on the Palmer drought severity index (PDSI, scPDSI). The new dataset is based on the standardized precipitation evapotranspiration index (SPEI). The index was obtained from the CRU TS3.0 data, covering time scales from 1 to 48 months for the period 1901-2006, and has a spatial resolution of 0.5°. The advantages of the new dataset are that: i) it improves the spatial resolution of the unique global drought dataset at a global scale; ii) it is spatially and temporally comparable to other datasets, given the probabilistic nature of the SPEI, and, in particular; iii) it enables identification of various drought types, given the multiscalar character of the SPEI. More details at: http://www.eead.csic.es/spei/spei.html, The Global 0.5° gridded SPEI dataset is made available under the Open Database License. Any rights in individual contents of the database are licensed under the Database Contents License. Users of the dataset are free to share, create and adapt under the conditions of attribution and share-alike. Use of the newest version is recommended. Older versions are still available to allow replicability., All currently available gridded drought datasets at continental and global scales are based on either the PDSI or the sc-PDSI. A new global drought dataset based on the Standardised Precipitation-Evapotranspiration Index (SPEI) has been developed, which covers time scales from 1-48 months at a spatial resolution of 0.5°, and provides temporal coverage for the period 1901-2006. This dataset represents an improvement in spatial resolution and operative capability of previous gridded drought datasets based on the PDSI, and enables identification of various drought types., A monthly global dataset of a multiscalar drought index is presented and compared in terms of spatial and temporal variability with the existing continental and global drought datasets based on the Palmer drought severity index (PDSI, scPDSI). The new dataset is based on the standardized precipitation evapotranspiration index (SPEI). The index was obtained from the CRU TS3.0 data, covering time scales from 1 to 48 months for the period 1901-2006, and has a spatial resolution of 0.5°. The advantages of the new dataset are that: i) it improves the spatial resolution of the unique global drought dataset at a global scale; ii) it is spatially and temporally comparable to other datasets, given the probabilistic nature of the SPEI, and, in particular; iii) it enables identification of various drought types, given the multiscalar character of the SPEI. More details at: http://www.eead.csic.es/spei/spei.html

The dataset is freely available on the web repository of the Spanish National Research Council (CSIC) in three different formats (NetCDF, binary raster, and plain text)., Format: The plain text archive is composed of 576 zipped files, corresponding to the SPEI index at time scales between 1 and 48 months for the whole World and divided by decades (except the last file, containing only data for the period 2001-2006). Each zipped file contains one plain text file (.csv). Data on those files are separated by commas, ′,'. Naming convention: spei[tempscale]_[decade].zip, where [tempscale] is a number between 1 and 48 indicating the temporal scale of the index (months), and [decade] indicates the years of data contained in the file. Example: spei12_1910-1919.zip. Data are stored as plain text separated by commas, ','. Each file contains the following columns: GRAPH_ID (cell identification), X (longitude coordinate), Y (latitude coordinate), mmmaaaa (the monthly SPEI values, e.g. Jan1910)., The Global 0.5° gridded SPEI dataset is made available under the Open Database License. Any rights in individual contents of the database are licensed under the Database Contents License. Users of the dataset are free to share, create and adapt under the conditions of attribution and share-alike. Use of the newest version is recommended. Older versions are still available to allow replicability., All currently available gridded drought datasets at continental and global scales are based on either the PDSI or the sc-PDSI. A new global drought dataset based on the Standardised Precipitation-Evapotranspiration Index (SPEI) has been developed, which covers time scales from 1-48 months at a spatial resolution of 0.5°, and provides temporal coverage for the period 1901-2006. This dataset represents an improvement in spatial resolution and operative capability of previous gridded drought datasets based on the PDSI, and enables identification of various drought types., A monthly global dataset of a multiscalar drought index is presented and compared in terms of spatial and temporal variability with the existing continental and global drought datasets based on the Palmer drought severity index (PDSI, scPDSI). The new dataset is based on the standardized precipitation evapotranspiration index (SPEI). The index was obtained from the CRU TS3.0 data, covering time scales from 1 to 48 months for the period 1901-2006, and has a spatial resolution of 0.5°. The advantages of the new dataset are that: i) it improves the spatial resolution of the unique global drought dataset at a global scale; ii) it is spatially and temporally comparable to other datasets, given the probabilistic nature of the SPEI, and, in particular; iii) it enables identification of various drought types, given the multiscalar character of the SPEI. More details at: http://www.eead.csic.es/spei/spei.html

The item is made of 2 files, of which 1 is the dataset and the other include detailed information about measures realized.-- Dataset contributed to the Project Carbochange, This dataset gathers discrete measurements of CO2 (pH and alkalinity) and hydrographic variables (salinity, temperature, dissolved oxygen, nitrate, phosphate and silicate) obtained during the cruise MOC2EQ carried out from 5 April to 16 May 2010. pH was measured spectrophotometrically following the Clayton and Byrne (1993). This method consists on adding a dye solution to the seawater sample, so that the ratio between two absorbances at two different wavelengths is proportional to the sample pH. Alkalinity was measured using an automatic potentiometric titrator Titrando 809 Metrohm, with a Metrohm 6.0232.100 combination glass electrode and a Pt-1000 probe for temperature measurement following the methodology given by Pérez and Fraga (1987). Dissolved oxygen was analyzed following the widely applied Winkler method. Determinations of nitrate, phosphate and silicate were carried out following methods described by Hansen and Grassoff (1983) Salinity and Temperature were recorded with a CTD probe, Spanish Projects GHG4MOC (CTM2009-07574-E) and MOC2 (CTM2008-06438-C02-01/MAR) supported by Ministerio de Ciencia e Innovación, and CARBOCHANGE (264879), No

The item is made of 2 files, of which 1 is the dataset and the other include a small description of the measured variables.-- Dataset contributed to the Project Carbochange, This dataset gathers discrete measurements of CO2 (pH and alkalinity) and hydrographic variables (salinity, temperature, dissolved oxygen, nitrate, phosphate and silicate) obtained during the cruise MOC2Austral carried out from 8 February to 10 March 2010. pH was measured spectrophotometrically following the Clayton and Byrne (1993). This method consists on adding a dye solution to the seawater sample, so that the ratio between two absorbances at two different wavelengths is proportional to the sample pH. Alkalinity was measured using an automatic potentiometric titrator Titrando 809 Metrohm, with a Metrohm 6.0232.100 combination glass electrode and a Pt-1000 probe for temperature measurement following the methodology given by Pérez and Fraga (1987). Dissolved oxygen was analyzed following the widely applied Winkler method. Determinations of nitrate, phosphate and silicate were carried out following methods described by Hansen and Grassoff (1983) Salinity and Temperature were recorded with a CTD probe, Spanish Projects GHG4MOC (CTM2009-07574-E) and MOC2 (CTM2008-06438-C02-02/MAR) supported by Ministerio de Ciencia e Innovación, and CARBOCHANGE (264879), No

The item is made of 2 files, of which 1 is the dataset and the other include a small description of the measured variables.-- Dataset contributed to the Project Carbochange.-- More information in http://hdl.handle.net/10261/115861, This dataset gathers discrete measurements of CO2 (pH and alkalinity) and hydrographic variables (salinity, temperature, dissolved oxygen, nitrate, phosphate and silicate) obtained during the cruise OVIDE 2010 carried out from 8 to 30 June 2010. pH was measured spectrophotometrically following the Clayton and Byrne (1993). This method consists on adding a dye solution to the seawater sample, so that the ratio between two absorbances at two different wavelengths is proportional to the sample pH. Alkalinity was measured using an automatic potentiometric titrator Titrando 809 Metrohm, with a Metrohm 6.0232.100 combination glass electrode and a Pt-1000 probe for temperature measurement following the methodology given by Pérez and Fraga (1987). Dissolved oxygen was analyzed following the widely applied Winkler method. Determinations of nitrate, phosphate and silicate were carried out following methods described by Hansen and Grassoff (1983) Salinity and Temperature were recorded with a CTD probe, French OVIDE Project supported by CNRS, and CARBOCHANGE, No

The study area covers an area of 36 km2 and included approximately 5000 mixed (Vibroseis and explosives) source points recorded with a 25 m inline source and receiver spacing., The Basque–Cantabrian Basin of the northern Iberia Peninsula constitutes a unique example of a major deformation system, featuring a dome structure developed by extensional tectonics followed by compressional reactivation. The occurrence of natural resources in the area and the possibility of establishing a geological storage site for carbon dioxide motivated the acquisition of a 3-D seismic reflection survey in 2010, centered on the Jurassic Hontomín dome. The objectives of this survey were to obtain a geological model of the overall structure and to establish a baseline model for a possible geological CO2 storage site., Spanish Ministry of Industry, Tourism and Trade through the CIUDEN and ICTJA agreement.--European Union through the Technology Demonstration Plant of Compostilla.--Spanish Ministry of Education Science.--Generalitat de Catalunya.--, Peer reviewed

A high-resolution controlled-source wide-angle reflection seismic experiment was carried out in Morocco in spring 2010. The energy released by six explosions was recorded by 939 Reftek 125a stations (Texans) from the IRIS instrument pool. The location of the shots had an average spacing of 70 km between them. The charge (approximately 1 TM) was distributed in 2–4 boreholes per shot point at depths of 30–60 m., The crustal structure and topography of the Moho boundary beneath the Atlas Mountains of Morocco has been constrained by a controlled source, wide-angle seismic reflection transect: the SIMA experiment (Seismic Imaging of the Moroccan Atlas). It is a high resolution seismic profile acquired from the Sahara craton across the High and the Middle Atlas and the Rif Mountains., Ministerio de Educación y Ciencia, CGL2007–63889, CGL2006–00041; Ministerio de Ciencia e Innovación, CGL2010–15416; Ministerio de Ciencia e Innovación. Plan Nacional de Investigación científica, desarrollo e innovación tecnológica, CGL2009–09727; Comisión Interministerial de Ciencia y Tecnología (CICYT), CGL2008–03474-E; European Science Foundation Eurocores, 07-TOPO_EUROPE_FP-006; United States National Science Foundation (NSF), EAR-0808939, No