Skip to main content

Document language

Encontrados 1734543 resultado(s)
Encontradas 17346 página(s)

Semantic Kansei Engineering Approach for Game Controllers and Design Improvement

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
González González, Alfonso (ORCID: 0000000231711062)

The entertainment industry undergoes constant changes, and video games, along with the ways people enjoy them, evolve dynamically. In this context, there arises a need to innovate in areas such as user–game interaction and the design of conventional controllers to keep up with these transformations. This study has found that the design requirements of the external geometry of video game controllers significantly impact users’ purchasing decisions, who often rely on their sensations and emotions…, The authors wish to thank the Spanish Ministry of Science and Innovation’s European and Regional Development Fund “Una manera de hacer Europa” for supporting this research. This study was carried out through Research Project GR-21098 linked to the VI Regional Research and Innovation Plan of the Regional Government of Extremadura and by the Spanish Ministry of Science and Innovation, peerReviewed



Bubble bursting in a weakly-viscoelastic liquid

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rodríguez Díaz, Paloma (ORCID: 0000000262065104)

Publicado en: Physics of Fluids, volume 35, issue 10 con DOI: https://doi.org/10.1063/5.0167476, Estudiamos el estallido de burbujas en líquidos ligeramente viscoelásticos. Las macromoléculas disueltas forman una monocapa en la entrefase agua-líquido, afectando a la dinámica de la burbuja durante el colapso de la cavidad. Para una concentración óptima , los efectos en la entrefase amortiguan las ondas de longitud corta, lo que intensifica el enfocamiento de energía responsable de la eyección del chorro. Esto ocasiona un importante aumento (reducción) de la velocidad (radio) de la primera…, We study the bursting of bubbles in weakly viscoelastic liquids. The dissolved macromolecules form a monolayer at the water-air interface, influencing the bubble dynamics during the cavity collapse. For an optimum polymer concentration, the interfacial effects dampen short-wavelength waves, which intensifies the focusing of energy powering the jet ejection. This results in a significant increase (decrease) in the first-emitted droplet velocity (radius). The jet formation produces strain rates…, Support from the Spanish Ministry of Science and Innovation (grant no. PID2019-108278RB-C32 / AEI / 10.13039/501100011033 and grant no. PID2019-108278RBC31) and Gobierno de Extremadura (grant no. GR21091) is gratefully acknowledged., peerReviewed



Effect of the polymer viscosity and relaxation time on the Worthington jet produced by bubble bursting in weakly viscoelastic liquids

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Cabalgante Corrales, Eduardo (ORCID: 0000000260596913)

publicado en: International Journal of Multiphase Flow, Volume 184, March 2025, 105095, con DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2024.105095, Embargado hasta el 1-3-2027, El trabajo estudia experimentalmente la influencia de la viscoelasticidad del líquido en el estallido de burbujas. Utilizamos polímeros con pesos moleculares distintos para analizar por separado los efectos del tiempo de relajación extensional y la viscosidad. En la región paramétrica estudiada, el tiempo de relajación tiene mayor influencia en si se produce o no la emisión de gotas, mientras que la viscosidad polimérica afecta más a la velocidad del chorro de Worthington. La viscoelasticidad…, We study the influence of bulk viscoelasticity on bubble bursting experimentally. We consider polymers with disparate molecular weights to analyze the effects of the polymer's extensional relaxation time and viscosity separately. Within the parameter region explored in this study, the polymer relaxation time has a larger influence on whether a droplet is emitted or not, while the polymeric viscosity has the largest effect on the Worthington jet velocity. Viscoelasticity suppresses the…, Spanish Ministry of Science and Innovation (MCIN)through grants PID2022-140951OB-C21 and PID2022-140951OB-C22/AEI/10.13039/501100011033/FEDER, UE is gratefully acknowledged. This publication is part of grant FJC2021-046447-I, financed byMCIN/AEI/10.13039/501100011033 and European Union ‘‘NextGen-erationEU’’/PRTR., peerReviewed



Efecto del recubrimiento en el comportamiento mecánico y la bioactividad de andamiajes biocerámicos fabricados mediante moldeo robotizado

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Motealleh, Azadeh

Tesis doctoral con la Mención de "Doctor Internacional", El hueso es uno de los tejidos más frecuentemente trasplantado. Los injertos óseos se pueden dividir en varias categorías: autoinjertos, aloinjertos y xenoinjertos. Por otra parte, en este sentido, la ingeniería de tejido óseo surgió hace casi tres décadas como una alternativa para promover la capacidad regenerativa del hueso. Una de las etapas más importantes en la ingeniería de tejidos es el diseño y fabricación de una estructura tridimensional porosa biodegradable (andamiaje) capaz de…, Bone is one of the most frequently transplanted tissues. The materials used in bone grafting can be divided into several major categories, including autografts, allografts, and xenografts. Each of these options has its own advantages and disadvantages. The field of bone tissue engineering (BTE) was emerged nearly three decades ago as a convenient alternative to promote the regenerative ability of the host body. One of the most important stages of BTE is the design and processing of a porous,…



Efficacy of ergonomic interventions on work-related musculoskeletal pain: a systematic review and meta-analysis

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Santos, Weiner (ORCID: 0000-0001-9241-7388)

Este artículo tiene información suplementaria disponible online en la siguiente dirección: https://www.mdpi.com/article/10.3390/jcm14093034/s1, Among the leading causes of work-related disability, musculoskeletal diseases (MSDs) profoundly affect productivity and quality of life. Workplace changes, equipment adjustments, and training courses, among other ergonomic interventions, seek to lower the frequency and degree of MSDs. This systematic review and meta-analysis evaluated whether ergonomic interventions help prevent and control MSDs in various workplace environments. Methods: A systematic search was conducted in PubMed, Scopus,…, peerReviewed



Benchmarking federated strategies in peer-to-peer federated learning for biomedical data

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Salmerón Silvera, José Luis (ORCID: 0000-0002-8358-419X)

The increasing requirements for data protection and privacy have attracted a huge research interest on distributed artificial intelligence and specifically on federated learning, an emerging machine learning approach that allows the construction of a model between several participants who hold their own private data. In the initial proposal of federated learning the architecture was centralised and the aggregation was done with federated averaging, meaning that a central server will orchestrate…, Prof. Salmerón research was kindly supported by the project Artificial Intelligence for Healthy Aging (Convocatoria 2021 – Misiones de I+D en Inteligencia Artificial: Inteligencia Artificial distribuida para el diagnóstico y tratamiento temprano de enfermedades con gran prevalencia en el envejecimiento, exp.: MIA.2021.M02.0007) lead by Capgemini Engineering., peerReviewed



Elliot and Symmetric Elliot Extreme Learning Machines for Gaussian noisy industrial thermal modelling

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Salmerón Silvera, José Luis (ORCID: 0000-0002-8358-419X)

This research proposes an Elliot-based Extreme Learning Machine approach for industrial thermal processes regression. The main contribution of this paper is to propose an Extreme Learning Machine model with Elliot and Symmetric Elliot activation functions that will look for the fittest number of neurons in the hidden layer. The methodological proposal is tested on an industrial thermal drying process. The thermal drying process is relevant in many industrial processes such as the food industry,…, peerReviewed



Reactive spark plasma sintering of ultrahard wear-resistant boron carbide-SiC-TaB2 composites from B4C with TaSi2 aids

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ojalvo Guiberteau, Cristina (ORCID: 0000-0003-0102-2677)

Este artículo tiene información suplementaria disponible online en la siguiente dirección: https://ars.els-cdn.com/content/image/1-s2.0-S0955221925004467-mmc1.pdf, The fabrication of new ceramic composites by reactive spark plasma sintering (SPS) from B4C with 5–30 vol% TaSi2 aids was investigated, next evaluating some of their mechanical-tribological properties. First, it was found that, because a transient Si melt is formed, TaSi2 aids reduce significantly the SPS temperature of B4C (down to 1800◦C for 5 vol% TaSi2 and 1550◦C for 30 vol% TaSi2, temperatures at which pure B4C is unsinterable). Second, it was found that reactive SPS from B4C+TaSi2 results…, This work is part of the project PID2022–137393NB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Cristina Ojalvo thanks her post-doctoral grant (reference number at University of Extremadura “MS-4”) through the programme “Margarita Salas para la formación de jóvenes doctores”, funded by the Ministerio de Universidades (Gobierno de España) and by the “European Union NextGenerationEU”., peerReviewed



Effect of post-processing heat treatment on micro-contact damage of zirconia-reinforced lithium silicate dental materials

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Pérez Díaz, José Antonio (ORCID: 0009-0004-9337-2715)

Zirconia-reinforced lithium silicate (ZLS) is utilized as a material for prosthetic tooth crowns, offering enhanced strength compared to other dental glass-ceramics. In this study, we investigate a commercial ZLS material, provided in a fully crystallized form. We examine the effects of an optional post-processing heat treatment on micro-contact damage using controlled indentation tests simulating the primary modes of contact during chewing: axial and sliding. Our findings indicate that the…, peerReviewed



Processing of novel ZrB2-Inconel 718 cermets by freeze casting and pressureless spark plasma sintering

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Sández Gómez, Álvaro (ORCID: 0009000209565377)

The fabrication of novel ZrB2-Inconel 718 cermets, containing 10–50 vol% of the latter, through an innovative route combining freeze casting and pressureless spark plasma sintering was investigated. It is shown that fully dense cermets were fabricated, having twice the hardness of the Inconel 718 superalloy and thrice the toughness of the ZrB2 ceramic they were made of. Microstructural characterisation using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray…, This publication is part of the M-ERA.Net3 project AM-ACTS, grant PCI2022-132933, funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR., peerReviewed



Evaluating the mechanical integrity and reliability of multi-channelled flat-sheet ceramic membranes for filtration applications

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
García Galán, Manuel (ORCID: 0000000225203125)

Una corrección de este artículo fue publicada en: Ceramics International, Volume 51, Issue 23PA, September 2025, Page 39347. DOI: https://doi.org/10.1016/j.ceramint.2025.06.082. Dicha corrección fue incluida al final del artículo original., Ceramic membranes represent an emergent filtration technology that is receiving increasing research attention, particularly concerning their filtration behaviour (i.e., permeability, selectivity, and fouling) and industrial scalability. Given the inherent brittleness of ceramic materials, mechanical properties of ceramic membranes, especially those related to fracture, are also important pieces of information although nonetheless rarely evaluated. Therefore, a methodological approach for…, This work is part of the project TED2021-129188B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. The authors also acknowledge the financial support provided by the Innovation Fund Denmark (Government of Denmark) under Grant no. 2079-00012B (Grand Solutions Program; SusBrane project)., peerReviewed



A comparison of the corrosion behaviour over time in 0.5 M NaCl environment of TiCN spark plasma sintered with and without Si aids

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ojalvo Guiberteau, Cristina (ORCID: 0000-0002-1797-6611)

Este artículo tiene información suplementaria disponible online en la versión del editor del artículo., The corrosion behaviour over time in 0.5 M NaCl of TiCN spark plasma sintered at low temperature (1400◦C) with 5 vol% Si aids and its reference pure TiCN spark plasma sintered at high temperature (2100◦C) were investigated by electro-chemical techniques (i.e., open circuit potential, current-potential curves, and electrochemical impedance spectroscopy) and microstructural characterisation (i.e., optical microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy), and…, The authors acknowledge the financial support provided by the Ministerio de Ciencia e Innovation (Gobierno de España) under Grant no. PID2022–137393NB-I00, co-financed with FEDER funds. This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020, financed by national funds through the FCT/MCTES (PIDDAC). Cristina Ojalvo acknowledges support from the Spanish Ministry of Universities through the program…, peerReviewed



Scratch, fretting, and sliding wear of a ZrB2-hardened Zr3Al2 intermetallic-ceramic composite

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
López Arenal, Jesús (ORCID: 0000-0002-1797-6611)

The unlubricated wear behaviour of a very recently developed ZrB2-hardened Zr3Al2 intermetallic-ceramic composite was investigated for the first time. In particular, tribological tests of scratch, fretting, and sliding were performed with no external lubrication under varied loads against diamond counterparts to thus account for different types and conditions of frictional contacts, and the worn surfaces were characterised in detail to identify the corresponding wear modes and mechanisms. It…, The authors acknowledge the financial support provided by the Spanish Ministry of Science and Innovation under Grant no. PID2019-103847RJ-I00, Junta de Andalucía under Grant no. P18-RTJ-1972, and Junta de Extremadura under Grants nos. IB20017 and GR21170 (co-financed with FEDER funds)., peerReviewed



A comparative study of the dry sliding wear of WC-10wt.%(Co+Fe+Ni) cemented carbides pressureless sintered with different Fe/Co ratios

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Djematene, Fares (ORCID: 0000-0002-1797-6611)

Compositional effects on the dry sliding wear resistance of micrometer-grained WC-10 wt.%(Co+Fe+Ni) cemented carbides pressureless sintered with 2 wt.% Ni but different Fe/Co ratios were investigated. Their microstructures are very similar except for the contiguity of the WC grains, which increased with increasing Fe/Co ratio. Also, these cemented carbides are all almost fully dense, but with the degree of residual porosity exhibiting a complex trend with increasing Fe/Co ratio (first…, The authors thank the Algerian company Ceramique Boumerdes and the Scientific Research Project Unit of the Kocaeli University (Turkey) for the support provided during this work. Fares Djematene thanks Prof. Kamal Taibi for fruitful assistance and guidance. Angel L. Ortiz gratefully acknowledges support from the Junta de Extremadura (GR18149)., peerReviewed



Kansei Engineering as a tool for service innovation in the cultural sector: the design of an inclusive technology application

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
López Pérez, Óscar (ORCID: 0000000231711062)

The accelerated development of smart devices and the increased demand for technological services have given rise to new services with great potential for development in the market. Applications for museums are no exception, and more and more institutions are including such solutions in the cultural industry. However, there is still much to be developed, given the difficulties that people with disabilities have in accessing them. In this work were studied the characteristics that the future…, This work was partially funded by the Spanish Ministry of Science and Innovation’s European and Regional Government of Extremadura (Spain), (GR24148, PID2020-115570GB-C21 funded by MCIN/AEI/10.13039/501100011033)., peerReviewed



Global stability analysis of hydrodynamic focusing in the presence of a soluble surfactant

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rubio Chaves, Manuel Ángel (ORCID: 0000-0002-2380-9545)

We numerically study the influence of a soluble surfactant on the microjetting mode of the liquid–liquid flow focusing configuration. The surfactant adsorbs on the interface next to the feeding capillary and accumulates in front of the emitted jet, significantly lowering the surface tension there. The resulting Marangoni stress substantially alters the balance of the tangential stresses at the interface but does not modify the interface velocity. The global stability analysis at the minimum…, This research has been supported by the Spanish Ministry of Economy, Industry and Competitiveness under grants PID2019-108278RB, PID2022-140951OB-C21 and PID2022-140951OB-C22/AEI/10.13039/501100011033/FEDER,UE., peerReviewed



Experimental and numerical analyses of the hemodynamics impact on real intracranial aneurysms: a particle tracking approach

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Souza, Andrews (ORCID: 0000-0002-2274-1374)

This study investigates the impact of hemodynamics on real intracranial aneurysms (IAs) using experiments and computational fluid dynamics (CFD) simulations. A particle tracking velocimetry (PTV) approach was used to study the vortical structures inside a real aneurysm and validate numerical simulations performed at a steady regime for different flow rates. Moreover, this and two additional patient-specific cases have been numerically analyzed, focusing on flow patterns, wall shear stress (WSS)…, C. Ferrera gratefully acknowledges funding from the Junta de Extremadura through grant IB20105 (partially funded by FEDER). The authors additionally acknowledge the projects EXPL/EME-EME/0732/ 2021 and 2022.06207.PTDC for the financial support, through national funds (OE), within the scope of the Scientific Research and Technological Development Projects (IC&DT) program in all scientific domains (PTDC), PORTUGAL 2020 Partnership Agreement, European Regional Development Fund (FEDER), via the…, peerReviewed



Comparison of RANS and LES turbulent flow models in a real stenosis

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Lopes, Diogo (ORCID: 0000-0002-2274-1374)

This study focuses on the performance of various turbulence models in predicting hemodynamic variables within a patient-specific geometry of the Brachiocephalic trunk exhibiting a severe stenosis. Numerical simulations employing Reynolds-averaged Navier-Stokes (RANS) and Large Eddy Simulation (LES) models were conducted, comparing four RANS with two LES models. Results indicated significant differences in turbulent structures between RANS and LES models, with the k-ω RANS model closely…, This work was developed with the aim of the doctoral grant SFRH/BD/144431/2019 and the projects UIDB/04436/2020, UIDB/04077/2020, funded by the Portuguese Foundation for Science and Technology (FCT). This work was partially funded by Junta de Extremadura through grant IB20105 (partially financed by FEDER). We thank the Programa Propio - Universidad Politécnica de Madrid, and the Ayuda Primeros Proyectos de Investigación ETSII-UPM. We also thank Programa de Excelencia para el Profesorado…, peerReviewed



Stability and tip streaming of a surfactant-loaded drop in an extensional flow. Influence of surface viscosity

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Herrada Gutiérrez, Miguel Ángel (ORCID: 0000-0002-2049-6395)

We study numerically the nonlinear stationary states of a droplet covered with an insoluble surfactant in a uniaxial extensional flow. We calculate both the eigenfunctions to reveal the instability mechanism and the time-dependent states resulting from it, which provides a coherent picture of the phenomenon. The transition is of the saddle-node type, both with and without surfactant. The flow becomes unstable under stationary linear perturbations. Surfactant considerably reduces the interval of…, This research has been supported by the Spanish Ministry of Economy, Industry and Competitiveness under grants DPI2016-78887 and PID2019-108278RB, by Junta de Extremadura under grant GR18175, and by Junta de Andalucía under grant P18-FR-3623., peerReviewed



Direct ink writing and pressureless spark plasma sintering of ultra-high temperature ceramics for the production of complex parts with internal microchannels

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Martín-Rayo Nogales, Florencia (ORCID: 0009-0002-2166-6090)

Se ha desarrollado una novedosa ruta de fabricación que combina la escritura directa con tinta (DIW) con la sinterización por plasma de chispa sin presión (SPS) para producir componentes cerámicos de ultra alta temperatura (UHTC) densos de TiB₂, ZrB₂ y ZrC que incorporan microcanales internos, utilizando un 20 % en volumen de MoSi₂ como aditivo. Se demuestra que la producción de piezas con microcanales requiere un control preciso de las condiciones de impresión y secado para evitar el…, A novel manufacturing route combining direct ink writing (DIW) with pressureless spark plasma sintering (SPS) has been developed to produce dense ultrahigh temperature ceramics (UHTC) components of TiB2, ZrB2, and ZrC incorporating internal microchannels, using 20 vol% MoSi2 as additive. It is shown that the production of microchanneled parts requires careful control of the printing and drying conditions to prevent cracking. Inks formulated with carboxymethyl-cellulose as binder proved…, This study is part of the M-ERA.Net3 project AM-ACTS, grant PCI2022–132933, and was also supported by project BRASA, grant PID2024–157151OB-I00, funded by MCIN/AEI/10.13039/501100011033 and, respectively, the European Union NextGenerationEU/PRTR and FEDER, UE., peerReviewed



Fabricating ultrahard boron carbide-silicon carbide-zirconium diboride composites by spark plasma sintering from B4C with ZrSh aids

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Zamora Rodríguez, Víctor (ORCID: 0000-0003-0102-2677)

Versión aceptada publicada en: Journal of the European Ceramic Society, Volume 44, Issue 6, June 2024, Pages 4323-4329 con https://doi.org/10.1016/j.jeurceramsoc.2023.11.078., Triplex-particulate ceramic composites with varying proportions of boron carbide plus SiC and ZrB2 second phases were fabricated by transient liquid-phase assisted spark plasma sintering (SPS) from B4C with 5–30 vol% ZrSi2 aids, optimising the SPS temperatures and identifying the so far elusive carbon source for the in situ formation of most of the SiC in these composites and in their boron carbide–SiC–metal diboride counterparts. Firstly, it is shown that ZrSi2 is a suitable sintering additive…, The authors acknowledge the financial support provided by the Junta de Extremadura under Grants nos. IB20017, TA18014, and GR21170. Cristina Ojalvo acknowledges support from the Spanish Ministry of Universities through the programme “Margarita Salas para la formación de jóvenes doctores”, co-funded by the European Union., peerReviewed



Affordable spark plasma sintering of superhard Al-doped ZrB2 nanoceramics from ZrH2, B, and Al mechanically activated by shaker milling

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
López Arenal, Jesús (ORCID: 0000-0002-1797-6611)

Versión aceptada publicada en: Ceramics International, Volume 50, Issue 9, Part B, 1 May 2024, Pages 15856-15866. https://doi.org/10.1016/j.ceramint.2024.02.065, A route, based on the short-time shaker milling of a 16ZrH2+29B+1Al powder mixture followed by its low-temperature reactive spark plasma sintering (SPS), is presented for the affordable fabrication of novel superhard ZrB2 ceramics. Firstly, it is shown that just 1 h of shaker milling intimately mixes and significantly refines the ZrH2, B, and Al particles, mechanically activating the powder mixture. Secondly, it is shown that the shaker-milled 16ZrH2+29B+1Al powder mixture is very sinterable…, peerReviewed



Analysis of pelletizing of granulometric separation powder from cork industries

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Montero Puertas, Irene (ORCID: 0000-0003-4002-9935)

Las industrias del corcho generan una cantidad considerable de residuos sólidos durante su procesamiento. Su gestión implica un problema para las empresas que deben reconsiderar su reutilización para otros fines. En este trabajo se estudia el proceso de granulación de polvo de separación granulométrico, que es uno de los principales residuos de la industria del corcho y que presenta propiedades adecuadas (como materia prima) para su uso térmico. Sin embargo, su heterogeneidad característica,…, Cork industries generate a considerable amount of solid waste during their processing. Its management implies a problem for companies that should reconsider its reuse for other purposes. In this work, an analysis of pelletizing of granulometric separation powder, which is one of the major wastes in cork industries and which presents suitable properties (as an raw material) for its thermal use, is studied. However, its characteristic heterogeneity, along with its low bulk density (which makes…, • Gobierno de Extremadura, proyectos para la cooperación en sectores estratégicos entre grupos de investigación y empresas : PCJ100502 y PCJ100603 • Gobierno de Extremadura, apoyo a grupos de investigación : GR10151, peerReviewed



Control of several emissions during olive pomace thermal degradation

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Miranda García-Cuevas, María Teresa (ORCID: 0000-0002-2641-0820)

La biomasa juega un papel importante como fuente de energía, siendo una alternativa interesante a los combustibles fósiles debido a sus características respetuosas con el medio ambiente y sostenibles. Sin embargo, debido a la exposición de los clientes a las emisiones durante el calentamiento de biomasa, los contaminantes evolucionados deben ser tenidos en cuenta y controlados. Cambiar las materias primas o mezclarlas con otra biomasa menos contaminante podría ser un paso adecuado para reducir…, Biomass plays an important role as an energy source, being an interesting alternative to fossil fuels due to its environment-friendly and sustainable characteristics. However, due to the exposure of customers to emissions during biomass heating, evolved pollutants should be taken into account and controlled. Changing raw materials or mixing them with another less pollutant biomass could be a suitable step to reduce pollution. This work studied the thermal behaviour of olive pomace, pyrenean oak…, • Gobierno de Extremadura, proyectos para la cooperación en sectores estratégicos entre grupos de investigación y empresas : PCJ100502 y PCJ100603 • Gobierno de Extremadura, apoyo a grupos de investigación : GR10151, peerReviewed



The onset of electrospray: the universal scaling laws of the first ejection

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Gañán Calvo, Alfonso Miguel (ORCID: 0000-0002-4573-5647)

Se investigada teórica y experimentalmente la desintegración de gotas líquidas con baja conductividad eléctrica y sujetas a un campo eléctrico. Esta desintegración tiene lugar a través del desarrollo de una cúspide cónica que eventualmente expulsa un ligamento líquido muy delgado. Emite una primera gota diminuta desde el final del ligamento. Debido a su excepcional tamaño pequeño y gran carga eléctrica por unidad de volumen, esa disminución ha sido objeto de importantes estudios recientes. En…, The disintegration of liquid drops with low electrical conductivity and subject to an electric field is investigated both theoretically and experimentally. This disintegration takes place through the development of a conical cusp that eventually ejects an ultrathin liquid ligament. A first tiny drop is emitted from the end of this ligament. Due to its exceptionally small size and large electric charge per unit volume, that drop has been the object of relevant recent studies. In this paper,…, • Ministerio de Economía y Competitividad. Beca DPI2013-46485 (I+D+i), peerReviewed



Mechanical discrete simulator of the electro-mechanical lift with n:1 roping

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Alonso Sánchez, Francisco Javier (ORCID: 0000-0001-8683-6471)

El proceso de diseño de nuevos productos de ingeniería de elevación es una tarea difícil debido, principalmente, a la complejidad y esbeltez del sistema de elevación, exigiendo una herramienta predictiva para la elevación mecánica. Una mecánica ad-hoc simulador discreto, como una alternativa a la "mecánica" de propósito general simuladores está propuesto. En primer lugar, la síntesis y la experimentación, proceso que ha llevado a establecer un modelo adecuado capaz de simular con…, The design process of new products in lift engineering is a difficult task due to, mainly, the complexity and slenderness of the lift system, demanding a predictive tool for the lift mechanics. A mechanical ad-hoc discrete simulator, as an alternative to ‘general purpose’ mechanical simulators is proposed. Firstly, the synthesis and experimentation process that has led to establish a suitable model capable of simulating accurately the response of the electromechanical lift is discussed. Then,…, peerReviewed



A comparison among different Hill-type contraction dynamics formulations for muscle force estimation

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Romero Sánchez, Francisco (ORCID: 0000000162354435)

El músculo es un tipo de tejido capaz de contraerse y, por lo tanto, acortarse, produciendo una fuerza capaz de generar movimiento. El análisis de su actividad es esencial para entender cómo se genera la fuerza para realizar un movimiento y cómo esa fuerza puede ser estimada a partir de las medidas directas o indirectas. El modelo muscular Hill-tipo es uno de los modelos más utilizados para describir el mecanismo de producción de fuerza. Está compuesto por diferentes elementos que describen el…, Muscle is a type of tissue able to contract and, thus, shorten, producing a pulling force able to generate movement. The analysis of its activity is essential to understand how the force is generated to perform a movement and how that force can be estimated from direct or indirect measurements. Hill-type muscle model is one of the most used models to describe the mechanism of force production. It is composed by different elements that describe the behaviour of the muscle (contractile, series…, • Ministerio de Economía y Competitividad y Fondos FEDER. Proyecto DPI2012-38331-C03 • Unión Europea. Fondos FEDER, peerReviewed



A new methodology to identify minimum strain anatomical lines based on 3-D digital image correlation

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Barrios Muriel, Jorge Claudio (ORCID: 0000-0001-8683-6471)

Hoy en día hay un desarrollo continuo de dispositivos portátiles en diversos campos, como ropa deportiva, ortesis y aparatos personales, entre otros. El diseño de estos dispositivos involucra al cuerpo humano como un entorno de apoyo. Sobre la base de esta premisa, el desarrollo de dispositivos portátiles requiere una mejor comprensión del campo de tensión de la piel del segmento del cuerpo durante el movimiento humano. Este artículo presenta una metodología basada en un sistema de correlación…, Today there is continuous development of wearable devices in various fields such as sportswear, orthotics and personal gadgets, among others. The design of these devices involves the human body as a support environment. Based on this premise, the development of wearable devices requires an improved understanding of the skin strain field of the body segment during human motion. This paper presents a methodology based on a three dimensional digital image correlation (3D-DIC) system to measure the…, • Ministerio de Economía y Competitividad. Proyecto DPI2015- 65959-C3-3R (I+D+i) • Gobierno de Extremadura y Fondo Europeo de Desarrollo Regional. Proyecto TPR010, peerReviewed



Evaluation of energy consumption in German hospitals: benchmarking in the public sector

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
González González, Alfonso (ORCID: 0000000231711062)

La utilización de puntos de referencia en la gestión de las instalaciones de atención de la salud permite una comparación inmediata entre los hospitales. La evaluación comparativa permite determinar su consumo de energía previsto y estimar el posible margen de ahorro. En el período 2005-2015, se estudiaron 90 Eco-Auditorías de la UE de 23 hospitales públicos de Alemania para analizar el consumo de energía relacionado con las condiciones meteorológicas, la superficie construida, el producto…, The use of benchmarking in the management of healthcare facilities enables immediate comparison between hospitals. Benchmarking allows ascertaining their expected energy consumption and estimating the possible savings margin. In the 2005–2015 period, 90 EU Eco-Audits of 23 public hospitals in Germany were studied to analyze the energy consumption related with weather conditions, built surface area, gross domestic product (GDP), geographic location (GL), bed numbers, and employee numbers. The…, • Junta de Extremadura y Fondo Social Europeo. Proyecto GR-18029, peerReviewed



Transonic flow focusing: stability analysis and jet diameter

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rubio Chaves, Manuel Ángel (ORCID: 0000-0002-2380-9545)

We study numerically and experimentally the stability of the transonic flow focusing used in serial femtosecond crystallography (SFX) to place complex biochemical species into the beam focus. Both the numerical and experimental results indicate that the minimum flow rate for steady jetting increases slightly with the gas stagnation pressure. There is a remarkable agreement between the stability limit predicted by the global stability analysis and that obtained experimentally. Our simulations…, This research has been supported by the Spanish Ministry of Science and Innovation under Grants PID2019-108278RB, by Junta de Extremadura under Grant GR18175, and by Junta de Andalucía under Grant P18-FR-3623. The authors are also grateful to P. Rodriguez-Díaz for her help in manufacturing the ejector., peerReviewed



Fabricating toughened super-hard B4C composites at lower temperature by transient liquid-phase assisted spark plasma sintering with MoSi2 additives

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ojalvo Guiberteau, Cristina (ORCID: 0000-0002-0110-2231)

Publicado en: Journal of the European Ceramic Society. Volume 39, Issue 9, Pages 2862-2873, ISSN 0955-2219, https://doi.org/10.1016/j.jeurceramsoc.2019.03.035, Toughened, super-hard B4C triplex-particulate composites were densified by spark plasma sintering with MoSi2 additives (5, 10, and 15 vol.%) at temperatures in the range 1750–1850 °C at which the reference monolithic B4C ceramics are porous. It is proved that MoSi2 is a reactive sintering additive that promotes densification by transient liquid-phase sintering, thus yielding fully-dense B4C-MoB2-SiC composites at relatively lower temperatures. Specifically, the MoSi2 first reacts at moderate…, Se densificaron materiales compuestos B4C triplex-particulados, endurecidos y superduros, mediante sinterización por plasma de chispa con aditivos MoSi2 (5, 10 y 15 vol.%) a temperaturas en el rango 1750-1850 °C a las que las cerámicas monolíticas B4C de referencia son porosas. Se ha demostrado que el MoSi2 es un aditivo de sinterización reactivo que promueve la densificación por sinterización transitoria en fase líquida, produciendo así materiales compuestos de B4C-MoB2-SiC totalmente densos a…, his work was supported by the Ministerio de Economía y Competitividad (Government of Spain) and FEDER Funds under Grant nºMAT2016-76638-R. Financial support from the Junta de Extremadura under Grant nº GR15078, also co-financed with FEDER Funds, is gratefully acknowledged as well., peerReviewed



Spark plasma sinterability and dry sliding-wear resistance of WC densified with Co, Co+Ni, and Co+Ni+Cr

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Boukantar, Aniss-Rabah (ORCID: 0000-0002-0110-2231)

Publicado en: International Journal of Refractory Metals and Hard Materials. 92, art. no. 105280. DOI: 10.1016/j.ijrmhm.2020.105280, The spark plasma sinterability and the dry sliding-wear resistance of ultrafine-grained WC densified with ~16.7 vol.% of Co, Co+Ni, and Co+Ni+Cr, compositions equivalent to that of the typical WC-10wt.%Co, were investigated and compared critically. Firstly, it was found that the partial substitutions of Co by Ni or by Ni+Cr are detrimental for the pressureless ultrafast sinterability, but much more in the latter than the former case, attributable to the higher eutectic temperatures during…, This work was supported by the Ministerio de Economía y Competitividad (Government of Spain) and FEDER Funds under the Grant n° MAT2016-76638-R. Financial support from the Junta de Extremadura under the Grant n° GR18149, also co-financed with FEDER Funds, is gratefully acknowledged as well., peerReviewed



Solid-state spark plasma sintering of super wear resistant B4C–SiC–TiB2 triplex-particulate composites

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Zamora Rodríguez, Víctor (ORCID: 0000-0003-0102-2677)

Publicado en: Ceramics International. Volume 49, Issue 3, Pages 5532-5537, ISSN 0272-8842, https://doi.org/10.1016/j.ceramint.2022.11.181., B4C–SiC–TiB2 ceramic composites with equal volume fractions of the three phases (i.e., 1B4C–1SiC–1TiB2) were fabricated by solid-state spark-plasma sintering (SPS) from commercially available B4C, SiC, and TiB2 powders, first optimizing their densification temperature and then investigating for the first time the unlubricated sliding wear of the optimally SPS-ed composite. It is shown that SPS is optimal at 1800 °C (under 75 MPa pressure and 5 min soaking), which is much lower than the…, Se fabricaron compuestos cerámicos de B4C-SiC-TiB2 con fracciones de volumen iguales de las tres fases (es decir, 1B4C-1SiC-1TiB2) mediante sinterización por chispa-plasma (SPS) en estado sólido a partir de polvos de B4C, SiC y TiB2 disponibles en el mercado, optimizando primero su temperatura de densificación e investigando después por primera vez el desgaste por deslizamiento sin lubricación del compuesto con SPS óptimo. Se demuestra que el SPS es óptimo a 1800 °C (bajo una presión de 75 MPa…, This work was supported by the Junta de Extremadura under Grants nos. IB20017, TA18014, and GR21170, all co-financed with FEDER Funds., peerReviewed



Crystal-size dependence of the spark-plasma-sintering kinetics of ZrB2 ultra-high-temperature ceramics

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Zamora Rodríguez, Víctor (ORCID: 0000-0003-0102-2677)

Publicado en: Journal of the European Ceramic Society. Volume 32, Issue 2, Pages 271-276, https://doi.org/10.1016/j.jeurceramsoc.2011.08.027., The crystal-size dependence of the spark-plasma-sintering (SPS) kinetics of ZrB2 ultra-high-temperature ceramics (UHTCs) was investigated. It was found that refining the starting powder enhances the SPS kinetics, reducing the onset temperatures of sintering and of the intermediate and final sintering regimes, as well as promoting a greater maximum shrinkage rate at lower temperatures. This enhancement was only relevant with reduction in crystal size to the nanoscale. Finally, the implications…, This work was supported by the Ministerio de Ciencia y Tecnología (Government of Spain) under Grant N° MAT 2007-61609., peerReviewed



Hertzian indentation of a ZrB2–30% SiC ultra-high-temperature ceramic up to 800°C in air

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Zamora Rodríguez, Víctor (ORCID: 0000-0003-0102-2677)

Publicado en: Journal of the American Ceramic Society. vol. 93. n. 7. pp. 1848 - 1851 DOI: 10.1111/j.1551-2916.2010.03631.x, The contact mechanical properties of the ZrB2–30% SiC ultra-high-temperature ceramic (UHTC) were studied from room temperature up to 800°C in air, by combining Hertzian indentation tests with finite element modeling. It was found that the elastic modulus and yield stress decrease with increasing temperature, especially above 600°C. It was also found that the ZrB2–30% SiC UHTC is “ductile” in the sense that its first damage mode is quasiplasticity, followed by cone cracking, and eventually by…, Se estudiaron las propiedades mecánicas de contacto de la cerámica de ultra alta temperatura (UHTC) ZrB2-30% SiC desde temperatura ambiente hasta 800°C en aire, combinando ensayos de indentación hertzianos con modelización por elementos finitos. Se observó que el módulo elástico y el límite elástico disminuyen con el aumento de la temperatura, especialmente por encima de 600ºC. También se descubrió que el UHTC de ZrB2-30% SiC es "dúctil" en el sentido de que su primer modo de daño es…, Supported by the Ministerio de Ciencia y Tecnología (Government of Spain) under Grant N° MAT 2007-61609., peerReviewed



Impregnation of β-tricalcium phosphate robocast scaffolds by in-situ polymerization

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Martínez Vázquez, Francisco Javier (ORCID: 0000-0002-1086-7586)

Publicado en: Journal of Biomedical Materials Research. vol. 101, n. 11. pp.3086-3096. https://doi.org/10.1002/jbm.a.34609, Se realizó una polimerización de apertura en anillo de ε-caprolactona (ε-CL) y L-lactida (LLA) para impregnar andamiajes de β-fosfato tricálcico (β-TCP) fabricados mediante robocasting. Se utilizaron tintas coloidales concentradas preparadas a partir de polvos comerciales de β-TCP para fabricar estructuras porosas consistentes en una malla tridimensional de varillas interpenetradas. El ε-CL y el LLA se polimerizaron in situ dentro de la estructura cerámica utilizando una lipasa y un octanoato…, Ring-opening polymerization of ε-caprolactone (ε-CL) and L-lactide (LLA) was performed to impregnate β-tricalcium phosphate (β-TCP) scaffolds fabricated by robocasting. Concentrated colloidal inks prepared from β-TCP commercial powders were used to fabricate porous structures consisting of a 3-D mesh of interpenetrating rods. ε-CL and LLA were in-situ polymerized within the ceramic structure by using a lipase and stannous octanoate, respectively, as a catalysts. The results show that both the…, This work was supported by the Ministerio de Ciencia e Innovación (PET2008_0168_02), Junta de Extremadura (IB10006) and FEDER funds., peerReviewed



Clarifying the effect of sintering conditions on the microstructure and mechanical properties of β-tricalcium phosphate

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Perera Martínez, Fidel Hugo (ORCID: 0000-0003-4348-110X)

Se analiza el efecto de las condiciones de sinterización (temperatura y tiempo) sobre la microestructura (densidad y tamaño de grano) y las propiedades mecánicas (dureza, módulo elástico y resistencia) de biocerámicas de β-fosfato tricálcico (β-TCP) fabricadas a partir de polvos comerciales deficientes en Ca. Contrariamente a la opinión general actual, se demuestra que la temperatura óptima de sinterización para maximizar el rendimiento mecánico de este material β-TCP no está necesariamente por…, The effect of the sintering conditions (temperature and time) on the microstructure (density and grain size) and mechanical properties (hardness, elastic modulus, and strength) of β-tricalcium phosphate (β-TCP) bioceramics fabricated from Ca-deficient commercial powders is analyzed. Contrary to current general opinion, it is demonstrated that the optimal sintering temperature to maximize the mechanical performance of this β-TCP material is not necessarily below the β ↔ α transformation…, This work was supported by the Ministerio de Educación y Ciencia (Spanish Government) and the Fondo Social Europeo under grant MAT2006-08720., peerReviewed



Bioceramic scaffolds fabrication: indirect 3D printing combined with icetemplating vs. robocasting

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Roleček, Jakub (ORCID: 0000-0003-4348-110X)

La creación de plantillas de hielo combinada con la impresión 3D indirecta se propone como un método prometedor para la preparación de armazones con porosidad multiescala, incluida una red de macrocanales interconectados bien definida. Se utilizó robocasting como técnica comparativa para producir armazones con porosidad comparable a los niveles de microporosidad introducida y microporosidad entre granos. Se midió y comparó la porosidad, la composición de fase y la estabilidad mecánica de los…, Ice-templating combined with indirect 3D printing is proposed as a promising method for preparation of scaffolds with multiscale porosity, including a well-defined interconnected macro-channel network. Robocasting was used as a comparative technique to produce scaffolds with comparable porosity at the introduced microporosity and the inter-grain microporosity levels. Porosity, phase composition and mechanical stability were measured and compared for bio-scaffolds prepared by both techniques.…, Ministerio de Economía y Competividad. Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016. Programa Estatal de I+D+i Orientada a los Retos de la Sociedad (Proyecto MAT2015-64670-R [MINECO/FEDER]) cofinanciada por los Fondos FEDER. - Czech Republic. Ministry of Education, Youth and Sports. Under grant LTT18013 (Inter-Transfer). JECS Trust - Contract No. 2017140. CEITEC Nano RI - MEYS CR, 2016-2019., peerReviewed



Enhancing the mechanical and in vitro performance of robocast bioglass scaffolds by polymeric coatings: Effect of polymer composition

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Motealleh, Azadeh (ORCID: 0000-0002-1086-7586)

Versión aceptada del trabajo publicado en https://www.sciencedirect.com/science/article/pii/S1751616118300791?via%3Dihub, The effect of different polymeric coatings, including natural and synthetic compositions, on the mechanical performance of 45S5 bioglass robocast scaffolds is systematically analyzed in this work. Fully amorphous 45S5 bioglass robocast scaffolds sintered at 550 °C were impregnated with natural (gelatin, alginate, and chitosan) and synthetic (polycaprolactone, PCL and poly-lactic acid, PLA) polymers through a dip-coating process. Mechanical enhancement provided by these coatings in terms of both…, En este trabajo se analiza sistemáticamente el efecto de diferentes recubrimientos poliméricos, incluyendo composiciones naturales y sintéticas, sobre el rendimiento mecánico de andamios robocast 45S5 bioglass. Se impregnaron andamios de biovidrio 45S5 completamente amorfos sinterizados a 550 °C con polímeros naturales (gelatina, alginato y quitosano) y sintéticos (policaprolactona, PCL y ácido poliláctico, PLA) mediante un proceso de recubrimiento por inmersión. Se evaluó la mejora mecánica…, The authors want to acknowledge the aid of Dr. Angel Luis Ortiz in the analysis of XRD data. Funding: This work was supported by the European Union Seventh Framework Programme [grant number 604036], by the Ministerio de Economía y Competitividad [grant MAT2015-64670-R (MINECO/FEDER)], by the Gobierno de Extremadura [grant IB13007] and the Fondo Europeo de Desarrollo Regional (FEDER)., peerReviewed



Construction of a hybrid lung model by combining a real geometry of the upper airways and an idealized geometry of the lower airways

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Agujetas Ortiz, Rafael (ORCID: 0000-0001-8710-5785)

Background and Objective: Health care costs represent a substantial an increasing percentage of global expenditures. One key component is treatment of respiratory diseases, which account for one in twelve deaths in Europe. Computational simulations of lung airflow have potential to provide considerable cost reduction and improved outcomes. Such simulations require accurate in silico modeling of the lung air- way. The geometry of the lung is extremely complex and for this reason very simple…, Antecedentes y Objetivo: Los costos de la atención de la salud representan un porcentaje sustancial y creciente de los gastos mundiales. Un componente clave es el tratamiento de las enfermedades respiratorias, que causan una de cada doce muertes en Europa. Las simulaciones computacionales del flujo de aire pulmonar tienen el potencial de proporcionar una reducción considerable de los costos y mejores resultados. Estas simulaciones requieren un modelado preciso en sílico de la vía aérea pulmonar…, This work was financially supported by the Spanish Ministry of Economy, Industry and Competitiveness - Instituto de Salud Carlos III under Project “Estudio de la influencia de la geometría de las vías respiratorias en las patologías pulmonares obstructivas (PI17/01639)”, Principado de Asturias under project “Ayudas a organismos públicos de investigación GRUPIN-IDI-2018–000205″, Junta de Extremadura under project “Ayudas para la realización de actividades de investigación y desarrollo…, peerReviewed



On the crystallite size refinement of ZrB2 by high-energy ball-milling in the presence of SiC

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Zamora Rodríguez, Víctor (ORCID: 0000-0003-0102-2677)

Publicado en: Journal of the European Ceramic Society. vol 31, n. 13. pp.2407-2414. https://doi.org/10.1016/j.jeurceramsoc.2011.05.035, The effect of SiC addition (5, 17.5, and 30 vol.%) on the high-energy ball-milling (HEBM) behaviour of ZrB2 is investigated. It was found that the presence of SiC during HEBM did not alter ZrB2 refinement mechanism of repeated brittle fracture followed by cold-welding, thereby leading to the formation of agglomerates consisting of primary nano-particles. SiC did, however, slow down the kinetics of crystallite size refinement and promoted the formation of finer agglomerates. Both of these…, The effect of SiC addition (5, 17.5, and 30 vol.%) on the high-energy ball-milling (HEBM) behaviour of ZrB2 is investigated. It was found that the presence of SiC during HEBM did not alter ZrB2 refinement mechanism of repeated brittle fracture followed by cold-welding, thereby leading to the formation of agglomerates consisting of primary nano-particles. SiC did, however, slow down the kinetics of crystallite size refinement and promoted the formation of finer agglomerates. Both of these…, This work was supported by the Ministerio de Ciencia y Tecnología (Government of Spain) under Grant N° MAT 2007-61609., peerReviewed



Influence of the surface viscosity on the breakup of a surfactant-laden drop

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ponce Torres, Alberto (ORCID: 0000-0002-3906-5931)

Examinamos tanto teórica como experimentalmente la ruptura de una gota pendiente cargada con un tensioactivo insoluble. Los experimentos muestran que una cantidad significativa de tensioactivo queda atrapada en la gota satélite resultante. Este resultado contradice las predicciones teóricas anteriores, en las que los efectos de la variación de la tensión superficial se limitaban a la solutocapilaridad y a los esfuerzos de Marangoni. Resolvemos numéricamente las ecuaciones hidrodinámicas,…, We examine both theoretically and experimentally the breakup of a pendant drop loaded with an insoluble surfactant. The experiments show that a significant amount of surfactant is trapped in the resulting satellite droplet. This result contradicts previous theoretical predictions, where the effects of surface tension variation were limited to solutocapillarity and Marangoni stresses. We solve numerically the hydrodynamic equations, including not only those effects but also those of surface…, Partial support from the Ministerio de Econom a y Competitividad and Gobierno de Extremadura (Spain) through Grants Nos. DPI2013-46485, TRA2013-45808-R and GR10047, is gratefully acknowledged, peerReviewed



The production of viscoelastic capillary jets with gaseous flow focusing

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ponce Torres, Alberto (ORCID: 0000-0002-3906-5931)

Se estudia experimentalmente la producción de chorros capilares viscoelásticos con enfocado gaseoso. En esta técnica, el líquido se inyecta a un caudal constante a través de un capilar de alimentación situado delante del orificio de descarga. Una corriente de gas cofluye con el chorro a través del orificio impulsada por una caída de presión constante. La corriente de gas succiona y arrastra el líquido, reduciendo el diámetro del chorro muy por debajo del diámetro del orificio. Debido a la…, The production of viscoelastic capillary jets with gaseous flow focusing is studied experimentally. In this technique, the liquid is injected at a constant flow rate through a feeding capillary located in front of the discharge orifice. A gas stream coflows with the jet across the orifice driven by a constant pressure drop. The gas stream sucks and drags the liquid, reducing the jet’s diameter well below the orifice diameter. Because of the rheological nature of the liquid, this focusing…, Partial support from the Ministry of Science and Education, Junta de Extremadura, and Junta de Andalucía (Spain) through Grants nos. DPI2013-46485, GR10047, and P08-TEP-04128, peerReviewed



The steady cone-jet mode of electrospraying close to the minimum volume stability limit

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ponce Torres, Alberto (ORCID: 0000-0002-4573-5647)

Estudiamos numérica y experimentalmente el modo cono-chorro estacionario de la electropulverización cerca del límite de estabilidad del caudal mínimo. El modelo "leaky dielectric" se resuelve para valores arbitrarios de la permitividad relativa y el número de Reynolds electrohidrodinámico. El análisis de estabilidad lineal de los flujos base se realiza calculando sus modos propios globales. El caudal mínimo se determina como aquel para el que el factor de crecimiento del modo…, We study both numerically and experimentally the steady cone-jet mode of electrospraying close to the stability limit of minimum flow rate. The leaky dielectric model is solved for arbitrary values of the relative permittivity and the electrohydrodynamic Reynolds number. The linear stability analysis of the base flows is conducted by calculating their global eigenmodes. The minimum flow rate is determined as that for which the growth factor of the dominant mode becomes positive. We find a good…, This research has been supported by the Spanish Ministry of Economy, Industry and Competitiveness under grant DPI2016-78887., peerReviewed



Study of the adsorption and electroadsorption process of Cu (II) ions within thermally and chemically modified activated carbon

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Macías García, Antonio (ORCID: 0000-0002-4387-1119)

Publicado en: Journal of Hazardous Materials, Volume 328, 15 April 2017, Pages 46-55 con DOI https://doi.org/10.1016/j.jhazmat.2016.11.036, The aim of this work is to modify the porous texture and superficial groups of a commercial activatedcarbon through chemical and thermal treatment and subsequently study the kinetics of adsorption andelectroadsorption of Cu (II) ion for these carbons.Samples of three activated carbons were used. These were a commercial activated carbon, commercialactivated carbon modified thermically (C-N2-900) and finally commercial activated carbon modifiedchemically C-SO2-H2S-200. The activated carbons were…, peerReviewed



Advances in Orthotic and Prosthetic Manufacturing: A Technology Review

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Barrios Muriel, Jorge Claudio (ORCID: 0000000162354435)

In this work, the recent advances for rapid prototyping in the orthoprosthetic industry are presented. Specifically, the manufacturing process of orthoprosthetic aids are analysed, as thier use is widely extended in orthopedic surgery. These devices are devoted to either correct posture or movement (orthosis) or to substitute a body segment (prosthesis) while maintaining functionality. The manufacturing process is traditionally mainly hand-crafted: The subject’s morphology is taken by means of…, This research was funded by the Consejería de Economía e Infraestructuras de la Junta de Extremadura and the European Regional Development Fund “Una manera de hacer Europa” under project IB18103., peerReviewed



Transmission and actuation systems in cable-driven, walking-assistance exosuits based on postural and dynamic synergies

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rodríguez Jorge, Daniel (ORCID: 0000000162354435)

The design of walking-assistance exosuits is becoming increasingly popular among those who aim at developing a light, affordable and wearable system. They are indeed an alternative to traditional exoskeletons, which tend to be bulkier and more expensive. The main advantages of exosuits, as opposed to exoskeletons, are their lower weight and price, as well as their increased wearability and kinematic compatibility with the user. Thus, it is key to optimize their design and, particularly, the…, This work has been funded by the Ministry of Science and Innovation - State Research Agency (MCIN/AEI/ https://doi.org/10.13039/501100011033) through project PID2019-107491RBI00 and by Consejería de Economía, Ciencia y Agenda Digital, Junta de Extremadura through project GR21098, peerReviewed



Analysis of the Influence of Component Type and Operating Condition on the Selection of Preventive Maintenance Strategy in Multistage Industrial Machines: A Case Study

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Álvarez García, Francisco Javier (ORCID: 0000-0002-2353-1539)

The study of industrial multistage component’s reliability, availability and efficiency poses a constant challenge for the manufacturing industry. Components that suffer wear and tear must be replaced according to the times recommended by the manufacturers and users of the machines. This paper studies the influence of the individual maintenance values of Main Time To Repair (MTTR), Time To Provisioning (TTPR) and Time Lost Production (TLP) of each component, including the type of component and…, This study has been carried out through the Research Project GR‐18029 linked to the VI Regional Research and Innovation Plan of the Regional Government of Extremadura, peerReviewed



Numerical model to predict and compare the hypotensive efficacy and safety of minimally invasive glaucoma surgery devices

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Kudsieh, Bachar (ORCID: 0000-0001-8710-5785)

To predict and compare the hypotensive efficacy of three minimally-invasive glaucoma surgery (MIGS) implants through a numerical model. Post-implant hypotensive efficacy was evaluated by using a numerical model and a computational fluid dynamics simulation. Three different devices were compared: the XEN 45 stent (tube diameter, 45 μm), the XEN 63 stent (63 μm) and the PreserFlo microshunt (70 μm). The influence of the filtration bleb pressure (Bp) and tube diameter, length, and position within…, The publication of this work is funded by the normative grant of the community of Madrid,Spain. The work has been funded by a research grant from the San Carlos Clinical Hospital, Health Research Institute (IdISSC), Madrid, Spain. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript"., peerReviewed



Experimental performance evaluation of self-consumption photovoltaic system with energy storage using TRNSYS

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Barrena, Fernando (ORCID: 0000-0003-4002-9935)

The optimal sizing of a Photovoltaic Battery System (PVBS) is a critical challenge due to the large number of parameters that can affect their optimization. It is sometimes difficult to recreate some experimental circumstances due to limitations presented in real prototypes. Consequently, a PVBS simulation model was created, and the anti-dumping mechanism was implemented in the software TRNSYS (Transient System Simulation Tool). Subsequently, experimental data obtained from a real system were…, We would like to thank the Regional Government of Extremadura for the support of research groups GR21021), peerReviewed



The Oxidation of ZrB2/MoSi2 Ceramics in Dissociated Air: The Influence of the Elaboration Technique

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Charpentier, Ludovic (ORCID: 0000-0003-4348-110X)

Con el fin de investigar las condiciones más extremas en las que se pueden operar materiales potencialmente aplicables en escudos térmicos reutilizables, el ZrB de ultra alta temperatura2 cerámicas con 20 vol.% MoSi2 se prepararon utilizando dos técnicas diferentes, prensado isostático en frío (CIP) y robocasting (RC, una técnica de fabricación aditiva), seguido de consolidación mediante sinterización por plasma por chispa sin presión (SPS). El comportamiento de oxidación de los materiales…, In order to investigate the most extreme conditions in which materials potentially applicable in reusable thermal shields can be operated, ultra-high-temperature ZrB2 ceramics with 20 vol.% MoSi2 were prepared using two different techniques, cold isostatic pressing (CIP) and robocasting (RC, an additive manufacturing technique), followed by consolidation using pressureless spark plasma sintering (SPS). The oxidation behavior of the resulting materials was analyzed in low-pressure dissociated…, This research was funded through the M-ERA.NET project 2021 “AM-ACTS” by the Agence Nationale de la Recherche, grant number ANR-22-MER3-0001; by MCIN/AEI/10.13039/501100011033, grant number PCI2022-132933; and the European Union “NextGenerationEU”/PRTR., peerReviewed



Analysis of Potential Use of Linear Fresnel Collector for Direct Steam Generation in Industries of the Southwest of Europe

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Sepúlveda Justo, Francisco José (ORCID: 0000-0002-6054-5614)

Industry sector has an important impact on primary energy consumption at the international level, and solar energy constitutes a real alternative to cover these energy needs partially. Among thermosolar concentration technologies, Linear Fresnel Collector (LFC) technology has some advantages that make it more accessible to industries. With the aim of providing new tools for easier decision-making processes, in the present work, several energy audits were carried out in industries (located in…, El sector industrial tiene un importante impacto en el consumo de energía primaria a nivel internacional, y la energía solar constituye una alternativa real para cubrir parcialmente estas necesidades energéticas. Entre las tecnologías de concentración termosolar, la tecnología de Colectores Lineales Fresnel (LFC) presenta algunas ventajas que la hacen más accesible a las industrias. Con el objetivo de proporcionar nuevas herramientas para facilitar los procesos de toma de decisiones, en el…, Junta de Extremadura and FEDER (Fondo Europeo de Desarrollo Regional “Una manera de hacer Europa”) for its support through the economic aid for research groups (GR18137), as well as Research, Development and Renewable energies for the improvement of business fabric in Centro, Extremadura and Alentejo Project (0330_IDERCEXA_4_E)., peerReviewed



Actuation Strategies for a Wearable Cable-Driven Exosuit Based on Synergies in Younger and Older Adults

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Bermejo García, Javier (ORCID: 0000000162354435)

Los adultos mayores (de 55 años o más) tienen más dificultades para realizar actividades de la vida diaria que los adultos más jóvenes (de 25 a 55 años). Aunque los cambios relacionados con la edad en la cinética de la marcha humana están bien documentados en términos cualitativos en la literatura científica, estas diferencias pueden cuantificarse y analizarse utilizando el análisis de estrategias de control motor a través de sinergias cinéticas. Se analizaron las marchas de dos grupos de…, Older adults (aged 55 years and above) have greater difficulty carrying out activities of daily living than younger adults (aged 25–55 years). Although age-related changes in human gait kinetics are well documented in qualitative terms in the scientific literature, these differences may be quantified and analyzed using the analysis of motor control strategies through kinetic synergies. The gaits of two groups of people (older and younger adults), each with ten members, were analyzed on a…, : This research was supported by the Ministry of Science and Innovation–Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) through project PID2019-107491RB-I00 and Conse jería de Economía, Ciencia y Agenda Digital, Junta de Extremadura, peerReviewed



Exoskeletons vs. Exosuits: A Comparative Analysis using Biological-based Computer Simulation

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Bermejo García, Javier (ORCID: 0000000162354435)

Publicado en Computers in Biology and Medicine, Volume 178, August 2024, 108752, con DOI https://doi.org/10.1016/j.compbiomed.2024.108752, Background: Interest in the design of gait assistance devices has experienced significant growth in recent years. Among various uses of assistive devices, those aimed at supporting the elderly have gained importance due to the rising population of this age group. Methods: This study aims to compare the efficacy of two types of assistive devices through musculoskeletal simulations. One case is an ideal device, simulating the motor actuation as it would be in a rigid exoskeleton, and, cable…, This research was supported by the Ministry of Science, Innovationand Universities—Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) through project PID2022-137525OB-C21.



The minimum or natural rate of flow and droplet size ejected by Taylor cone-jets: Physical symmetries and scaling laws

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Gañán Calvo, Alfonso Miguel (ORCID: 0000-0002-4573-5647)

We aim to establish the scaling laws for both the minimum rate of flow attainable in the steady cone-jet mode of electrospray, and the size of the resulting droplets in that limit. Use is made of a small body of literature on Taylor cone-jets reporting precise measurements of the transported electric current and droplet size as a function of the liquid properties and flow rate. The projection of the data onto an appropriate non-dimensional parameter space maps a region bounded by the minimum…, Nuestro objetivo es establecer las leyes de escala tanto para la tasa mínima de flujo alcanzable en el modo de electropulverización de chorro de cono estable como para el tamaño de las gotas resultantes en ese límite. Se hace uso de una pequeña cantidad de literatura sobre chorros cónicos de Taylor que informan mediciones precisas de la corriente eléctrica transportada y el tamaño de las gotas en función de las propiedades del líquido y el caudal. La proyección de los datos en un espacio de…, Ministerio de Educación y Ciencia (Ayuda FPI asociada al proyecto DPI201021103-C04), peerReviewed



Design, Control, and Pilot Study of a Lightweight and Modular Robotic Exoskeleton for Walking Assistance After Spinal Cord Injury

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Font Llagunes, Josep Maria (ORCID: 0000-0001-8683-6471)

Walking rehabilitation using exoskeletons is of high importance to maximize independence and improve the general well-being of spinal cord injured subjects. We present the design and control of a lightweight and modular robotic exoskeleton to assist walking in spinal cord injured subjects who can control hip flexion, but lack control of knee and ankle muscles. The developed prototype consists of two robotic orthoses, which are powered by a motor-harmonic drive actuation system that controls…, The authors acknowledge the support of the Spanish Ministry of Economy and Competitiveness (MINECO) along with the European Regional Development Fund (ERDF) under project DPI2015-65959-C3-R, the Galician Government under grant ED431B2016/031, and “la Caixa” Banking Foundation under grant LCF/TR CI17/10020001, peerReviewed



Global stability of the focusing effect of fluid jet flows

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Montanero Fernández, José María (ORCID: 0000-0002-3906-5931)

The global stability of the steady jetting mode of liquid jets focused by coaxial gas streams is analyzed both theoretically and experimentally. Numerical simulations allow one to identify the physical mechanisms responsible for instability in the low viscosity and very viscous regimes of the focused liquid. The characteristic flow rates for which global instability takes place are estimated by a simple scaling analysis. These flow rates do not depend on the pressure drop (energy) applied to…, Se analiza tanto teórica como experimentalmente la estabilidad global del modo de chorro constante de chorros de líquido enfocados por corrientes de gas coaxiales. Las simulaciones numéricas permiten identificar los mecanismos físicos responsables de la inestabilidad en los regímenes de baja y alta viscosidad del líquido enfocado. Los caudales característicos para los que se produce la inestabilidad global se estiman mediante un simple análisis de escala. Estos caudales no dependen de la caída…, Ministerio de Educación y Ciencia (DPI2010-21103), Junta de Extremadura (GR10047) y Junta de Andalucía (P08-TEP-04128), peerReviewed



Applicability of near-field electrospinning for the development of TCP-based thin fibres and scaffold 3D printing, Aplicabilidad del electrohilado de campo cercano para la obtención de fibras delgadas basadas en TCP y la impresión 3D de andamiajes

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
García Galán, Manuel (ORCID: 0000-0002-4573-5647)

A novel method for obtaining ceramic (tricalcium phosphate, TCP) fibres with a small diameter (below 0.1 mm) is proposed and its potential use in the 3D printing of scaffolds for biomedical applications is explored. An ink consisting of a high solid content (40 vol%) ceramic slurry in a photocurable resin was prepared and extruded using near-field electrospinning. The influence of the electric potential, flow rate, and distance between tip and collector on the fabrication process in static mode…, Se propone un nuevo método para obtener fibras cerámicas (fosfato tricálcico, TCP) con un diámetro pequeño (por debajo de 0,1 mm) y se explora su uso potencial en la impresión 3D de estructuras para aplicaciones biomédicas. Se preparó y extruyó una tinta que consiste en una suspensión cerámica con un alto contenido de sólidos (40 vol.%) en una resina fotocurable mediante electrohilado de campo cercano. Se estudió la influencia del potencial eléctrico, la velocidad de flujo y la distancia entre…, Este trabajo fue financiado por las subvenciones RTI2018-095566-B-I00, PID2019-108278RB-C32 y PEJ2018-003586-P financiadas por MCIN/AEI/10.13039/501100011033 y cofinanciadas por el Fondo Europeo de Desarrollo Regional (FEDER, una manera de hacer Europa) o el Fondo Social Europeo (FSE invierte en tu futuro)., peerReviewed



A particulate blood analogue based on artificial viscoelastic blood plasma and RBC-like microparticles at a concentration matching the human haematocrit

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rubio González, Alejandro (ORCID: 0000000262065104)

Publicado en Soft Matter, Issue 39, 2022,con DOI: https://doi.org/10.1039/D2SM00947A, There has been enormous interest in the production of fluids with rheological properties similar to those of real blood over the last few years. Application fields range from biomicrofluidics (microscale) to forensic science (macroscale). The inclusion of flexible microparticles in blood analogue fluids has been demonstrated to be essential in order to reproduce the behaviour of blood flow in these fields. Here, we describe a protocol to produce a whole human blood analogue composed of a…, En los últimos años, ha habido un enorme interés en la producción de fluidos con propiedades reológicas similares a las de la sangre real. Los campos de aplicación van desde la biomicrofluídica (microescala) hasta la ciencia forense (macroescala). Se ha demostrado que la inclusión de micropartículas flexibles en fluidos análogos de la sangre es esencial para reproducir el comportamiento del flujo sanguíneo en estos campos. Aquí, describimos un protocolo para producir un análogo de sangre humana…, A. R., M. L. and E. J. V. gratefully acknowledge the support of the Spanish Ministry of Science and Education (grant no. PID2019-108278RB-C32/AEI/10.13039/501100011033) and Gobierno de Extremadura (grants no. GR21091 and IB18005, partially supported through FEDER). TR and LCD acknowledge FEDER (COMPETE 2020 and NORTE 2020), FCT/MCTES (PIDDAC) and FCT for funding support under grants no. PTDC/EME-EME/ 30764/2017, PTDC/EME-APL/3805/2021, 2021.06532.BD, LA/P/0045/ 2020, UIDB/00532/2020, UIDP/00532…



Bubble rising in the presence of a surfactant at very low concentrations

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rubio González, Alejandro (ORCID: 0000000262065104)

Publicado en Physics of Fluids 36, 062112 (2024) con DOI https://doi.org/10.1063/5.0206793, This paper analyzes experimentally and numerically the steady bubble rising in water with a surfactant dissolved at very low concentrations. We explain how traces of surfactant can significantly change the bubble dynamics. The tiny surface tension variation produced by the surfactant monolayer has a negligible effect on the capillary pressure. However, this variation occurs within an extremely thin diffusive boundary layer, which produces a Marangoni stress three orders of magnitude larger than…, En este artículo se analiza experimental y numéricamente el ascenso constante de burbujas en agua con un surfactante disuelto en concentraciones muy bajas. Explicamos cómo trazas de surfactante pueden cambiar significativamente la dinámica de las burbujas. La pequeña variación de la tensión superficial producida por el surfactante monocapa tiene un efecto insignificante sobre la presión capilar. Sin embargo, esta variación ocurre dentro de una capa límite difusiva extremadamente delgada, lo que…, Support from the Spanish Ministry of Science and Innovation (MCIN) through Grant Nos. PID2022-140951OB-C21 and PID2022-140951OB-C22/AEI/10.13039/501100011033/FEDER, UE, is gratefully acknowledged., peerReviewed



Blood particulate analogue fluids: A review

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Sadek, Samir Hassan

Microfluidics has proven to be an extraordinary working platform to mimic and study blood flow phenomena and the dynamics of components of the human microcirculatory system. However, the use of real blood increases the complexity to perform these kinds of in vitro blood experiments due to diverse problems such as coagulation, sample storage, and handling problems. For this reason, interest in the development of fluids with rheological properties similar to those of real blood has grown over the…, La microfluídica ha demostrado ser una plataforma de trabajo extraordinaria para imitar y estudiar los fenómenos del flujo sanguíneo y la dinámica de los componentes del sistema microcirculatorio humano. Sin embargo, el uso de sangre real aumenta la complejidad para realizar este tipo de experimentos sanguíneos in vitro debido a diversos problemas como la coagulación, el almacenamiento de la muestra y los problemas de manipulación. Por esta razón, el interés en el desarrollo de fluidos con…, This research was funded by the Spanish Ministry of Science and Education Grant No. PID2019-108278RB-C32/AEI/10.13039/501100011033, and Junta de Extremadura (Spain) Grant Nos. GR18175 and IB18005 (partially financed by FEDER funds). The authors also acknowledge the Fundação para a Ciência e a Tecnologia (FCT) for partially financing the research under the strategic grants UIDB/04077/2020, UIDB/00532/2020, and the project NORTE-01-0145-FEDER- 030171 (PTDC/EME-SIS/30171/2017) funded by…, peerReviewed



A Comparative Study on Teaching Methodologies Applied in Engineering and Manufacturing Process Subjects during the COVID-19 Pandemic in 2020 and 2021

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
López Pérez, Óscar (ORCID: 0000000231711062)

Specific disciplines in engineering, such as manufacturing processes, require students in their academic stage to pay special attention, given the possible changes that may affect the acquisition of competencies. In an environment of uncertainty, such as a global pandemic, teaching must adapt without losing the effective delivery of content to students. The health and safety measures applied during the first months of the pandemic led to a different type of teaching to that which had…, This research was funded by Junta de Extremadura (Spain) and FEDER funds (GR18029), peerReviewed



Maintenance management and Optimization of the thermoforming process for the agri-food industry using the S2 model

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Álvarez García, Francisco Javier (ORCID: 0000-0002-2353-1539)

IOP Conference Series: Materials Science and Engineering, Volume 1193, 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain, The agri-food industry has been greatly enhanced in recent years with the introduction of process control and the automation [1] of certain links in the production chain. The seasons of the year in which these machines must be operational and show robust and reliable operation, have short durations (2 to 4 months) and are therefore greatly affected by unexpected failures that cause stops on the production lines. This paper attempts to expose a comparative advantages that can be obtained in…, The authors wish to thank the European Regional Development Fund “Una manera de hacer Europa” for their support towards this research. This study has been carried out through the Research’s Projects GR-18029 and GR-18059 linked to the VI Regional Research and Innovation Plan of the Regional Government of Extremadura., peerReviewed



Indoor Air Quality and Thermal Comfort in University Classrooms in Southwestern Spain: A Longitudinal Analysis from Pandemic to Post‐Pandemic

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Romero Muñoz, Pilar (ORCID: 0000-0003-1048-7804)

Tras el confinamiento por la COVID‐19, las autoridades sanitarias establecieron estrictos protocolos para ventilar los espacios interiores y reducir el contagio. Aunque el control de la enfermedad permitió relajar estas medidas, la calidad del aire interior (CAI) y la ventilación natural (VN) siguen siendo esenciales. Sin embargo, en determinadas condiciones climáticas, esto puede afectar al confort térmico de los ocupantes. Esta situación es relevante en los edificios educativos, donde el…, After the COVID‐19 lockdown, the health authorities established strict protocols for ventilating indoor spaces and reducing contagion. Although the control of the disease allowed these measures to be relaxed, indoor air quality (IAQ) and natural ventilation (NV) are still essential. However, in certain climatic conditions, this can affect the thermal comfort of the occupants. This situation is relevant in educational buildings, where thermal discomfort can influence students’ academic…, This research was funded by the grants to research groups in Extremadura (GR21021) and by the General Direction of Employment of the Regional Government of Extremadura within the framework of the “University Master’s Degree in Occupational Risk Prevention”, peerReviewed



Design of an action protocol for bioconstruction

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Díaz Parralejo, Antonio (ORCID: 0000-0002-5125-3687)

A la hora de diseñar un edificio cómodo y saludable hay que tener en cuenta numerosos elementos. Nos referimos principalmente al emplazamiento, los distintos materiales de construcción, la orientación del trazado, la presencia de líneas eléctricas y antenas de telefonía móvil cercanas, entre otros. Cada vez se reconoce más la relación entre el lugar donde vivimos o trabajamos y nuestra salud en general. En esta línea, hemos realizado diversos estudios y mediciones de los factores más…, Numerous elements are to be considered when designing a comfortable and healthy building. We are mainly referring to the site, different construction materials, layout orientation, the presence of power lines and nearby mobile phone antennae, among others. There is an increasingly recognized relationship between where we live or work and our overall health. Along these lines, we have undertaken several studies and measurements of the most influential factors, from the point of view of…, peerReviewed



Design of Semirigid Wearable Devices Based on Skin Strain Analysis

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Barrios Muriel, Jorge Claudio (ORCID: 0000000162354435)

Nowadays, both usability and comfort play a key role in the development of medical and wearable products. When designing any device that is in contact with the human body, the mechanical behavior of the embraced soft tissue must be known. The unavoidable displacement of the soft tissue during motion may lead to discomfort and, thus, the removal of the wearable product. This paper presents a new methodology to design and test a wearable device based on the measurement of the dynamic skin strain…, European Union through EFRD funds and Govern of Extremadura (Grant No. TPR-010). Spanish Ministry of Economy and Competitiveness (Grant No. DPI2015-65959-C3-3R)., peerReviewed



Design, preparation, and characterization of Yttria-Stabilized Zirconia (YSZ) coatings obtained by electrophoretic deposition (EPD)

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Pantoja Pertegal, Juan Luis (ORCID: 0000-0002-5125-3687)

Versión aceptada publicada en: Ceramics International, Volume 47, Issue 10, Part A, 15 May 2021, Pages 13312-13321, con DOI https://doi.org/10.1016/j.ceramint.2020.12.279, The main objective of this work is the design, preparation, and characterization of YSZ coatings by electrophoretic deposition (EPD) technique. The suspensions used for the preparation of zirconia-derived coatings by EPD have been thoroughly characterized. YSZ suspensions containing particles of different morphology and size have been used to optimize the electrophoretic characteristics of the suspensions. The correlation between the experimental results and the theoretical values predicted by…, Financial support of this work by the European Regional Development Fund and Junta de Extremadura through projects GR18013 and GR18192 is gratefully acknowledged., peerReviewed



Systematic Literature Reviews in Kansei Engineering for Product Design—A Comparative Study from 1995 to 2020

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
López Pérez, Óscar (ORCID: 0000000231711062)

Individual products and models on the market must be specifically differentiated from the rest to meet user demand. In terms of consumer purchasing behaviour, consumers increasingly base their decisions on subjective terms or the impression that the product leaves on them, both in terms of functionality, usability, safety, and price adequacy, and regarding the emotions and feelings that it triggers in them. This demand has lead both Asia and Europe to implement new methodologies to develop new…, The authors wish to thank the Consejería de Economía e Infraestructuras de Junta de Extremadura and the European Regional Development Fund ‘‘Una manera de hacer Europa’’ for their support of this research. This study was carried out through Research Projects GR-18029 and GR-18112 linked to the VI Regional Research and Innovation Plan of the General Government of Extremadura. This work was also supported by project 0499 4IE PLUS 4 E (Interreg V-A España-Portugal 2014–2020), and by the Department…, peerReviewed



Influence of the gas viscosity on the stability of flow focusing

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rubio González, Alejandro (ORCID: 0000000262065104)

Publicado en: Experimental Thermal and Fluid Science, Volume 141, 1 February 2023, 110788, con DOI: https://doi.org/10.1016/j.expthermflusci.2022.110788, En este trabajo medimos el caudal mínimo Qmín que permite producir un chorro estable mediante enfocamiento gaseoso con diámetros de hasta 30 micras. Comparamos los resultados obtenidos con distintos líquidos y diámetros. Utilizando análisis dimensional, determinamos la influencia de la viscosidad del gas sobre este límite de estabilidad. Par líquidos de viscosidad baja o moderadamente baja, existe un valor óptimo de la viscosidad del gas para la que Qmín alcanza su valor más bajo. Este valor…, Authors gratefully acknoledge the support from the Spanish Ministry of Science, Innovation, and Universities, Spain (grant no. PID2019-108278RB-C32/AEI/10.13039/501100011033) and Gobierno de Extremadura, Spain (grant no. GR21091)., peerReviewed



Editorial: Rehabilitation robotics: Challenges in design, control, and real applications

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Romero Sánchez, Francisco (ORCID: 0000000162354435)

In the last decade, research focused on rehabilitation robotics has progressed from proposing restricted or rigid solutions in a clinical setting to portable devices compliant with the user and also adapted to the their requirements, based on their disability and the rehabilitation training program. Novel techniques have inspired the evolution of rehabilitation devices from hard and bulky to soft, lightweight, and fully wearable. For example, biologically inspired actuators have relaxed the…, The authors, in order of appearance, wish to thank the following support given by: the Ministry of Science and Innovation—Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) through project PID2019-107491RB-I00 (FR-S), the National Council for Scientific and Technological Development (CNPq) though the Productivity Grant No. 311715/2021-4 (LL), the Ministry of Science and Innovation—Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) and ERDF A way of making Europe through…, notPeerReviewed



Editorial: Rehabilitation robotics: challenges in design, control, and real applications, volume II

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Romero Sánchez, Francisco (ORCID: 0000000162354435)

Rehabilitation Robotics is a relatively new field of study that requires a combination of knowledge and skills across multiple disciplines, ranging from mechanical design methodology and control systems theory to clinical neurosciences. The landscape of rehabilitation robotics has undergone a transformative shift, moving from rigid, clinical-centric solutions to more adaptable and user-centric approaches. The transition from conventional, hard-bodied systems to soft, lightweight, and fully…, The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. The authors, in order of appearance, wish to thank the following support given by: (FR-S) the Ministry of Science and Innovation—Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) through project PID2022-137525OB-C21, (LM) the National Council for Scientific and Technological Development (CNPq) though the Productivity Grant No. 311715/2021-4 and Carlos Chagas…, notPeerReviewed



Impact of personal protective equipment in preventing occupational injuries: a systematic review and meta-analysis

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Santos, Weiner (ORCID: 0000-0001-9241-7388)

Este artículo tiene información suplementaria disponible online en la siguiente dirección: https://www.frontiersin.org/articles/10.3389/fpubh.2025.1720363/full#supplementary-material, Background: Occupational injuries remain a significant public health concern across diverse industries, with personal protective equipment (PPE) widely advocated to mitigate risk. However, the real-world effectiveness of PPE and factors influencing its use require synthesis. Our objective is to determine whether the use of personal protective equipment (PPE) reduces the occurrence of occupational injuries among workers in high-risk industries. Methods: A comprehensive search was done to include…, peerReviewed



Compressive strength as a screening tool for quality control of tubular honeycomb ceramic filters

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
García Galán, Manuel (ORCID: 0000000225203125)

Este artículo tiene información suplementaria disponible online en la siguiente dirección: https://ars.els-cdn.com/content/image/1-s2.0-S0272884225023892-mmc1.pdf, Strength-based screening is proposed to complement the filtration-based screening for the quality control of tubular honeycomb ceramic filters. It is first shown how compressive failure loads can be measured, converted to failure strengths, and analysed with Weibull plots, and then this method is applied to industrial SiC filters at their four stages of the production chain demonstrating that toughness, not porosity or dominant pore size, determines the strength of these filters. Specifically,…, The authors acknowledge the financial support provided by the Innovation Fund Denmark (Government of Denmark) under Grant no. 2079-00012B (Grand Solutions Program; SusBrane project)., peerReviewed



The impact of cyclic oxidation in dissociated air on the mechanical properties of freeze-cast ZrB2/MoSi2 ceramics

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Charpentier, Ludovic (ORCID: 0009000209565377)

Creating reusable thermal shields would decrease our carbon footprint by eliminating the need for the reapplication of single-use ablative alternatives. Our previous investigations identified ultra-high-temperature ZrB2 with 20 vol.% MoSi2 ceramics as a promising candidate for the fabrication of reusable thermal shields. Therefore, in this study, this material was exposed to cyclic oxidation at 1800 and 2150 K in dissociated air in order to investigate how it might withstand multiple…, This research was funded through the M-ERA.NET project 2021 “AM-ACTS” by the Agence Nationale de la Recherche, grant number ANR-22-MER3-0001; by MCIN/AEI/10.13039/501100011033, grant number PCI2022-132933; and by the European Union “NextGenerationEU”/PRTR., peerReviewed



Low-temperature pressureless sintering B4C with Si aids: is it feasible?

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Fernández Ortíz, Antonio (ORCID: 0009-0002-4522-5783)

Una corrección de este artículo fue publicada en: Ceramics International, Volume 51, Issue 23PA, September 2025, Page 39348. DOI: https://doi.org/10.1016/j.ceramint.2025.06.083. Dicha corrección fue incluida al final del artículo original., The feasibility of fabricating dense boron carbide–SiC biparticulate composites by low-temperature pressureless sintering of B4C with Si aids was investigated. Firstly, it was found with 6 types of powder compacts (Si aids in the range 5–30 vol%) that low-temperature conventional pressureless sintering is unfeasible, with hardly any densification even after 1 h at 1600 ◦C (well above Si melting point) with as much as 30 vol% Si aids (excess Si). Secondly, it was also found with some of these…, This work is part of the project PID2022-137393NB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Antonio Fernández-Ortiz thanks his PhD grant PREP2022-000140, funded by MCIN/AEI/10.13039/501100011033 and by “ESF+”., peerReviewed



Facile preparation of glycine-based mesoporous graphitic carbons with embedded cobalt nanoparticles

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Wang, Wenhai (ORCID: 0000-0002-9797-7904)

Financiación Open Access proporcionada gracias al acuerdo CRUE-CSIC con Springer Nature., Este artículo tiene información suplementaria disponible online en la versión del editor del artículo., A simple route has been developed for the preparation of mesoporous graphitic carbons with embedded cobalt nanoparticles just using glycine as a nitrogen source, cobalt nitrate and distilled water. After heating the mixture to 300 ºC under magnetic stirring, a dry solid product was obtained, which was then carbonized at 900 ºC under argon atmosphere. Changing the glycine/Co molar ratio allowed controlling the size of the cobalt particles and their dispersion in the carbon matrix, the porosity…, This research was supported by the Spanish Ministry of Science and Innovation, through the ‘‘Severo Ochoa’’ Programme for Centers of Excellence in R&D (CEX2019-000917-S), the projects MAT2017-91404-EXP, RTI2018-096273-B-I00, RTI2018-3097753-B-I00, with FEDER co-funding, the CSIC program for the Spanish Recovery, Transformation and Resilience Plan ‘‘Plataforma Temática Interdisciplinar Transición Energética Sostenible+ (PTI-TRANSENER +)’’ funded by the Recovery and Resilience Facility of the…, peerReviewed



Organic polyradicals as redox mediators: effect of intramolecular radical interactions on their efficiency

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Badetti, Elena (ORCID: 0000-0002-9797-7904)

The spin−spin interactions between unpaired electrons in organic (poly)-radicals, especially nitroxides, are largely investigated and are of crucial importance for their applications in areas such as organic magnetism, molecular charge transfer, or multiple spin labeling in structural biology. Recently, 2,2,6,6-tetramethylpiperidinyloxyl and polymers functionalized with nitroxides have been described as successful redox mediators in several electrochemical applications; however, the study of…, This work was supported by: DGICT-MINECO (MAT2016-80826-R, MAT2017-91404-EXP, RTI2018-09273-B-I00), AGAUR (2017 SGR 918, 2014 SGR 1505, 2017 SGR 1687) and University of Padova. ICMAB acknowledges Spanish MINECO through the Severo Ochoa Centres of Excellence Programme Grant SEV- 2015-0496 and S.Z. his CSC grant., peerReviewed



Aqueous tape casting of super-hard B4C laminates with rGO-enriched reinforcing interlayers

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ojalvo Guiberteau, Cristina (ORCID: 0000-0002-1797-6611)

Superhard B4C parts with microarchitectures constituted by ceramic layers and evenly-spaced rGO-enriched reinforcing interlayers were fabricated for the first time. To this end, a concentrated slurry of B4C with its Ti-Al sintering additive was first prepared by aqueous colloidal processing, optimizing its total solids loading and content of both binder and plasticizer to obtain, by tape casting, handleable and flexible green tapes. A semidilute aqueous suspension of B4C with Ti-Al and abundant…, This work was supported by the Ministerio de Ciencia, Innovación y Universidades (Spain) and FEDER Funds under Grant nº RTI2018-099033-B-C33. Financial support from the Junta de Extremadura under Grant nº GR18149, also co-financed with FEDER Funds, is gratefully acknowledged as well. Cristina Ojalvo thanks the Junta de Extremadura for funding her PhD Grant nº PD16027., peerReviewed



A novel microfluidic method to produce monodisperse micrometer bubbles

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rubio González, Alejandro (ORCID: 0000000262065104)

Este artículo tiene información suplementaria disponible online en la versión del editor del artículo., We present a novel microfluidic method to produce quasi-monodisperse bubbles with diameters from tens to very few microns. A gaseous rivulet flows over the shallow groove printed on a T-junction exit channel. The triple contact line delimiting the rivulet is pinned to the groove edges. The rivulet breaks up into bubbles much smaller than the exit channel. When operating under adequate conditions, the flow transitions toward a singular mode where the rivulet remains quasi-static and emits…, This work was financially supported by the Spanish Ministry of Science, Innovation and Universities (grant no. PID2022-140951OB-C22/AEI/10.13039/501100011033/FEDER, UE)., peerReviewed



Recent advances of PDMS in vitro biomodels for flow visualizations and measurements: from macro to nanoscale applications

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Souza, Andrews (ORCID: 0000-0002-2274-1374)

Polydimethylsiloxane (PDMS) has become a popular material in microfluidic and macroscale in vitro models due to its elastomeric properties and versatility. PDMS-based biomodels are widely used in blood flow studies, offering a platform for improving flow models and validating numerical simulations. This review highlights recent advances in bioflow studies conducted using both PDMS microfluidic devices and macroscale biomodels, particularly in replicating physiological environments. PDMS…, C. Ferrera gratefully acknowledges funding from the Junta de Extremadura through grant IB20105 (partially funded by FEDER). The authors additionally acknowledge the projects 2022.02085.PTDC (https://doi.org/10.54499/2022.02085.PTDC), 2022.06207.PTDC (https://doi.org/10.54499/2022.06207.PTDC), and PTDC/EEI-EEE/2846/2021 (https://doi.org/10.54499/PTDC/EEI-EEE/2846/2021) for the financial support, through national funds (OE), within the scope of the Scientific Research and Technological…, peerReviewed



Superstability of micrometre jets surrounded by a polymeric shell

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rubio González, Alejandro (ORCID: 0000000262065104)

We have produced superstable compound liquid microjets with a 3D-printed coaxial flow-focusing injector. The aqueous jet core is surrounded by a shell, a few hundred nanometres in thickness, of a low-concentration aqueous solution of a low-molecular-weight polymer. Due to the stabilizing effect of the polymeric shell, the minimum liquid flow rate leading to stable flow-focusing is decreased by one order of magnitude, resulting in much thinner and longer jets. Possible applications of this…, This work was supported financially by the Spanish Ministry of Science, Innovation and Universities (grant No. PID2022-140951OB/AEI/10.13039/501100011033/FEDER, UE). We acknowledge additional support by DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, and by the Cluster of Excellence “Advanced Imaging of Matter” of the Deutsche Forschungsgemeinschaft (DFG), EXC 2056, project ID 390715994., peerReviewed



Fatigue behavior of H-section piles under lateral loads in cohesive soil

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Pérez Díaz, José Antonio (ORCID: 0009-0004-9337-2715)

Most structures supporting solar panels are found on thin-walled metal piles partially driven into the ground, optimizing costs and construction time. These pile foundations are subjected to repetitive lateral loads from various external forces, such as wind, which can compromise the integrity of the pile-soil system. Given that the expected operational lifespan of photovoltaic solar plants is generally 20–30 years, predicting their service life under fatigue loads is crucial. This research…, This research was partially funded by AUSCULTIA corporation (Madrid, Spain)., peerReviewed



Effect of sintering temperature and compaction pressure on the microstructure and mechanical strength of B4C supports for ceramic membrane filtration

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Madrigal Martínez, Juan Ramón (ORCID: 0000-0003-0102-2677)

The effect of sintering temperature and compaction pressure—used as a model for extrusion pressure—on the microstructure and mechanical strength of porous B4C supports for ceramic membrane filtration was investigated using extrudates prepared from a mixture of super-coarse (∼22–59 μm) and ultrafine (∼0.3–0.6 μm) powders. Total porosity (∼44 %) and mechanical reliability (Weibull moduli 4.1–4.3) were largely unaffected by sintering temperature (1900–2100 °C), but complete recrystallisation of…, This work has been financially supported by the project IB24012, funded by the Junta de Extremadura and co-financed by European Regional Development Funds, and by the project TED2021-129188B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., peerReviewed



Electrochemical corrosion behaviour of ZrB2–Inconel 718 composites

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Sández Gómez, Álvaro (ORCID: 0009000209565377)

The electrochemical corrosion behaviour of ZrB2–Inconel 718 composites fabricated by freeze casting followed by pressureless spark plasma sintering was investigated in a 0.5 M NaCl solution and compared with that of the reference monolithic ZrB2 and commercial Inconel 718. Electrochemical techniques, including open‑circuit potential measurements, potentiodynamic polarisation, and electrochemical impedance spectroscopy, were used alongside microstructural characterisation by optical microscopy…, The authors are grateful to the JECS Trust for funding the research stay of Álvaro Sández-Gómez at the Department of Materials and Ceramic Engineering, University of Aveiro (Portugal), under Contract No. 2024‑433. Álvaro Sández-Gómez sincerely thanks Prof. Ana M.R. Senos for her support as host supervisor for his JECS Trust grant. This work is part of the projects PID2022-137393NB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and PID2024-157151OB-I00,…, peerReviewed



Wear of the ultrahard B4C–SiC–TiB2 ceramic composite in unlubricated sliding contact with ceramic counter-parts

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rodríguez Rojas, Fernando (ORCID: 0000-0001-5329-9550)

Versión aceptada publicada en: Journal of the European Ceramic Society, Volume 44, Issue 10, August 2024, Pages 5555-5568 con https://doi.org/10.1016/j.jeurceramsoc.2024.03.032., Embargado hasta agosto 2026., The wear performance of the ultrahard B4C–SiC–TiB2 ceramic composite was investigated in unlubricated sliding contact in various friction pairs with other ceramics of very different mechanical properties (diamond, Y2O3-stabilised ZrO2, Al2O3, Si3N4, and borosilicate glass) under otherwise identical contact conditions. It was found that this composite is, due to its ultra-high hardness (∼35(1) GPa), a promising material for tribological applications (sliding-wear resistance of the order of 105…, The authors acknowledge the financial support provided by the Junta de Extremadura under Grant no. IB20017 (co-financed with FEDER funds)., peerReviewed



Effect of polymer infiltration on the flexural behavior of β-tricalcium phosphate robocast scaffolds

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Martínez Vázquez, Francisco Javier (ORCID: 0000-0002-1086-7586)

Se analiza la influencia de la infiltración de polímero sobre la resistencia a la flexión y la resistencia de los andamios de β-fosfato tricálcico (β-TCP) fabricados mediante robocasting (montaje de escritura directa). Las estructuras porosas constituidas por un enrejado tridimensional tetragonal de barras interpenetrantes se impregnaron con polímeros biodegradables (poli (ácido láctico) (PLA) y poli (ε-caprolactona) (PCL)) por inmersión de la estructura en una masa fundida polimérica. La…, The influence of polymer infiltration on the flexural strength and toughness of β-tricalcium phosphate (β-TCP) scaffolds fabricated by robocasting (direct-write assembly) is analyzed. Porous structures consisting of a tetragonal three-dimensional lattice of interpenetrating rods were impregnated with biodegradable polymers (poly(lactic acid) (PLA) and poly(ε-caprolactone) (PCL)) by immersion of the structure in a polymer melt. Infiltration increased the flexural strength of these model…, Trabajo financiado por: • el Séptimo Programa Marco de la Unión Europea de Investigación y Desarrollo Tecnológico (FP7/2007-2013, grant 604036) y • Fondos FEDER, peerReviewed



Preparation, characterization and study of morphology of activated carbon fibers, Preparación, caracterización y estudio morfológico de fibras de carbón activado

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Macías García, Antonio (ORCID: 0000-0002-4387-1119)

Utilizando fibras de kenaf larga, se ha llevado a cabo la preparación, caracterización y estudio morfológico de las fibras de carbón activado (ACFs). La caracterización era realizada mediante las isotermas de adsorción de N2 a -196 C, porosimetría de Hg y microscopia electrónica de barrido. La activación a 700 ºC con CO2 durante 2h (FBC4A72) y 4 h (FBC4A74) de la muestra carbonizada a 400 ºC durante 0.5 h en N2 (FBC4), mostraban un incremento en el tamaño del poro, como se observa en las…, Using kenaf as starting material, a study about the preparation and characterization of activated carbon fibers (ACFs) from long fibers was carried out. The carbonization products of kenaf fibers and ACFs were texturally characterized by N2 adsorption at -196 ºC, mercury porosimetry, and scanning electron microscopy. The activation of the raw material of Kenaf by its carbonization at 400 ºC for 0.5 h in a N2 atmosphere increase the porosity of the samples, particularly the activation at 700 ºC…, peerReviewed



Design and implementation of a data acquisition system for combustion tests

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Miranda García-Cuevas, María Teresa (ORCID: 0000-0002-2641-0820)

En los últimos años, el mercado de la biomasa ha aumentado constantemente. La industria de fabricación de pellets ha comenzado a buscar nuevos productos, como desechos de bosques, agricultura y residuos agroindustriales, entre otros, con el potencial de ser utilizados como biocombustibles. Sin embargo, algunos de estos desechos tienen algunas características que dificultan tanto el proceso de combustión como las condiciones de operación y mantenimiento de los equipos térmicos. Por lo tanto, se…, In recent years, the biomass market has constantly increased. The pellet manufacture industry has started looking for new products, such as wastes from forest, agriculture, and agroindustrial residues, among others, with the potential to be used as biofuels. However, some of these wastes have some characteristics that make both the combustion process and operating and maintenance conditions of thermal equipment difficult. Thus, further research to optimize the performance and ensure the…, • Gobierno de Extremadura . Ayuda GR10151, peerReviewed



Analysis of the average annual consumption of water in the hospitals of Extremadura (Spain)

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
García Sanz-Calcedo, Justo (ORCID: 0000-0003-4449-2636)

El objetivo de este documento es cuantificar el consumo medio anual de agua en 13 hospitales públicos de Extremadura (España). Se llevó a cabo un estudio analítico para reducir la demanda de agua de 2010 a 2014 en los hospitales mencionados. El estudio concluyó que, para determinar el consumo promedio anual de agua, una proporción fija no es la herramienta adecuada. En su lugar, se debe utilizar un tipo paramétrico relacionado con el área de la superficie construida y / o la cantidad de camas…, The aim of this paper is to quantity the annual average consumption of water in 13 public hospitals in Extremadura (Spain). An analytical study in order to reduce water demand was conducted from 2010 to 2014 in the above-mentioned hospitals. The study concluded that, in order to determine the average annual water consumption, a fixed ratio is not the appropriate tool. A parametric type related to the built surface area and/or number of beds by hospital should be used instead. The average annual…, • Ministerio de Educación, Cultura y Deporte y Fondo Social Europeo. Ayuda • Gobierno de Extremadura . Ayuda GR151057, peerReviewed



A new manual wheelchair propulsion system with self-locking capability on ramps

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Rodríguez Jiménez, Gaspar (ORCID: 0000-0002-9743-8281)

Una persona en silla de ruedas se enfrenta a muchas dificultades en sus intentos cotidianos de utilizar rampas, especialmente las de cierta longitud. En el presente trabajo se describe el diseño y la construcción de un sistema de propulsión para sillas de ruedas manuales para su uso en rampas largas ascendentes o descendentes. El diseño se caracteriza por un mecanismo de auto-bloqueo que se activa automáticamente para frenar la silla cuando el usuario deja de empujar. El sistema consiste en una…, A wheelchair user faces many difficulties in their everyday attempts to use ramps, especially those of some length. The present work describes the design and build of a propulsion system for manual wheelchairs for use in ascending or descending long ramps. The design is characterized by a self-locking mechanism that activates automatically to brake the chair when the user stops pushing. The system consists of a planetary transmission with a self-locking capacity coupled to a push rim with which…



Selective use of corn crop residues: energy viability

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Miranda García-Cuevas, María Teresa (ORCID: 0000-0002-2641-0820), Botet Jiménez, Almudena Blanca

Junta de Extremadura: IB18083, GR18137, GR18057, GR18035, peerReviewed



Fabrication of B4C ultrafiltration membranes on SiC supports

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ojalvo Guiberteau, Cristina (ORCID: 0000-0002-0110-2231)

Se describe la fabricación de membranas de ultrafiltración de B4C. En primer lugar, se preparó una suspensión semidiluida de B4C de B4C semidiluido mediante procesamiento coloidal acuoso, optimizando su dispersión por sonicación, y se utilizó para depositar membranas de B4C sobre soportes macroporosos de SiC mediante sonicación. se utilizó para depositar membranas de B4C sobre soportes macroporosos de SiC mediante recubrimiento por inmersión. En segundo lugar, las membranas verdes membranas…, The fabrication of B4C ultrafiltration membranes is described. Firstly, a semi-dilute B4C slurry was environmentally-friendly prepared by aqueous colloidal processing, optimizing its dispersion by sonication, and used to deposit B4C membranes onto SiC macro-porous supports by dip-coating. Secondly, the resulting green membranes were characterised microstructurally by scanning electron microscopy (SEM), and pressureless sintered within the intermediate sintering regime. Thirdly, the sintered…, • JECS Trusts. Beca de movilidad para Cristina Ojalvo Guiberteau • Junta de Extremadura. Beca de doctorado n. PD16027. • Junta de Extremadura y Fondo Europeo de Desarrollo Regional. Ayudas IB20017 y GR18149, peerReviewed



Manufacturing B4C parts with Ti-Al intermetallics by aqueous colloidal processing

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ojalvo Guiberteau, Cristina (ORCID: 0000-0002-0110-2231)

Publicado en: Journal of the European Ceramic Society. Volume 40, Issue 2, 2020, Pages 226-233, ISSN 0955-2219, https://doi.org/10.1016/j.jeurceramsoc.2019.10.002., The aqueous colloidal processing of submicrometre B4C powder (∼0.6 μm) with coarse Ti-Al powder (∼40 μm) as sintering additive was investigated. Firstly, by measuring the zeta potential, pHs were identified that promote the individual colloidal stability of the B4C and Ti-Al particles as well as their co-dispersion in water with two different deflocculants (one anionic and the other cationic). It was found that the anionic and cationic deflocculants shift the isoelectric points of B4C and Ti-Al…, Se investigó el procesamiento coloidal acuoso de polvo submicrométrico de B4C (∼0,6 μm) con polvo grueso de Ti-Al (∼40 μm) como aditivo de sinterización. En primer lugar, midiendo el potencial zeta, se identificaron los pH que promueven la estabilidad coloidal individual de las partículas de B4C y Ti-Al, así como su codispersión en agua con dos defloculantes diferentes (uno aniónico y otro catiónico). Se descubrió que los defloculantes aniónico y catiónico desplazan los puntos isoeléctricos del…, This work was supported by the Ministerio de Economía y Competitividad (Government of Spain) and FEDER Funds under the Grants nºMAT2016-76638-R andMAT2015-67586-C3-2-R. Financial support from the Junta de Extremadura under the Grant nºGR15078, also co-financed with FEDER Funds, is gratefully acknowledged as well. Cristina Ojalvo thanks the Junta de Extremadura for the funding provided under her PhD Grant nº PD16027., peerReviewed



Biological properties of solid free form designed ceramic scaffolds with BMP-2: “In vitro” and “in vivo” evaluation

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Abarrategi López, Ander (ORCID: 0000-0003-4348-110X)

Los andamios cerámicos porosos se estudian ampliamente en el campo de la ingeniería de tejidos debido a su potencial en aplicaciones médicas como sustitutos óseos o como materiales de relleno óseo. Los métodos de fabricación de forma libre sólida (SFF) permiten la fabricación de armazones cerámicos con una arquitectura de poros totalmente controlada, lo que abre nuevas perspectivas en los materiales de regeneración de tejido óseo. Sin embargo, se ha realizado poca experimentación sobre las…, Porous ceramic scaffolds are widely studied in the tissue engineering field due to their potential in medical applications as bone substitutes or as bone-filling materials. Solid free form (SFF) fabrication methods allow fabrication of ceramic scaffolds with fully controlled pore architecture, which opens new perspectives in bone tissue regeneration materials. However, little experimentation has been performed about real biological properties and possible applications of SFF designed 3D ceramic…, Ministerio de Ciencia e Innovación. Plan Nacional Proyectos I+D+i año 2008 (PET2008-0168). Ministerio de Ciencia e Innovación. Dirección General de Investigación y Gestión del Plan Nacional I+D+i. Ayudas de financiación para Programas de Actividad Investigadora, en el marco del Programa Consolider-Ingenio 2010 (CSD2009-00088). Ministerio de Ciencia e Innovación. Secretaria de Estado de Universidades. Ayudas del Programa Torres Quevedo, convocatoria para 2006, cofinanciadas con Fondo Social…, peerReviewed



Pressureless ultrafast sintering of near-net-shaped superhard isotropic B4C/rGO composites with Ti-Al additives

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ojalvo Guiberteau, Cristina (ORCID: 0000-0002-0110-2231)

Publicado en: Journal of the European Ceramic Society. Volume 40, Issue 12, 2020, Pages 4354-4360, https://doi.org/10.1016/j.jeurceramsoc.2020.05.033., Superhard composites of B4C reinforced with randomly-oriented reduced graphene oxide (rGO) nanoplatelets are manufactured by a near-net-shape fabrication route based on three successive steps. Firstly, aqueous colloidal processing is used for the environmentally-friendly preparation of a semi-concentrated multi-component slurry (B4C as main component, Ti-Al as sintering additive, and rGO as toughening reinforcement), whose suitability for wet shaping is demonstrated by rheological measurements.…, Los compuestos superduros de B4C reforzado con nanoplaquetas de óxido de grafeno reducido (rGO) orientadas al azar se fabrican mediante una ruta de fabricación casi en forma de red basada en tres pasos sucesivos. En primer lugar, se utiliza un proceso coloidal acuoso para la preparación respetuosa con el medio ambiente de una pasta multicomponente semiconcentrada (B4C como componente principal, Ti-Al como aditivo de sinterización y rGO como refuerzo endurecedor), cuya idoneidad para el…, This work was supported by the Ministerio de Economía y Competitividad (Government of Spain) and FEDER Funds under the Grants nº MAT2016-76638-R and RTI2018-099033-B-C33. Financial support from the Junta de Extremadura under the Grant nº GR18149, also co-financed with FEDER Funds, is gratefully acknowledged as well. The authors thank Abalonyx AS for kindly providing the prGO starting powders. Cristina Ojalvo thanks the Junta de Extremadura for funding her PhD Grant nº PD16027., peerReviewed



A simple graphite-based support material for robocasting of ceramic parts

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Martínez Vázquez, Francisco Javier (ORCID: 0000-0002-1086-7586)

Publicado en: Journal of the European Ceramic Society. 38 (4), pp. 2247 - 2250, DOI: 10.1016/j.jeurceramsoc.2017.10.016, Se propone una receta sencilla a base de grafito para su uso como tinta secundaria fugitiva para robocasting. La tinta presenta un excelente rendimiento reológico y compatibilidad fisicoquímica con otras tintas cerámicas. compatibilidad fisicoquímica con otras tintas cerámicas y puede quemarse completamente mediante un tratamiento térmico a 800 °C durante 2 horas. La sencillez del proceso de preparación, junto con su bajo coste, la convierten en una opción óptima para esta tarea. El desarrollo…, A simple graphite-based recipe is proposed for use as secondary fugitive ink for robocasting. The ink exhibits excellent rheological performance and physico-chemical compatibility with other ceramic inks and can be completely burned-out by a heat treatment at 800 °C for 2h. The simplicity of the preparation process, together with its low cost, make it an optimal choice for this task. The development of such an ink will greatly facilitate the manufacture of complex ceramic parts requiring the…, This work was supported by the Ministerio de Economía y Competitividad [grant MAT2015-64670-R (MINECO/FEDER)], the Junta de Extremadura [grant IB16094] and the Fondo Europeo de Desarrollo Regional (FEDER)., peerReviewed



Evaluation of direct light processing for the fabrication of bioactive ceramic scaffolds: Effect of pore/strut size on manufacturability and mechanical performance

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Paredes Sánchez, Claudia Isabel (ORCID: 0000-0002-1086-7586)

Publicado en: Journal of the European Ceramic Society. Volume 41, Issue 1, 2021, Pages 892-900, ISSN 0955-2219, https://doi.org/10.1016/j.jeurceramsoc.2020.09.002., Bioactive ceramic scaffolds for bone regeneration consisting of a three-dimensional mesh of interpenetrating struts with square section were fabricated via Digital Light Processing (DLP). The ability of the technique to manufacture 3D porous structures from β-tricalcium phosphate (β-TCP) powders with different dimensions of struts and pores was evaluated, identifying the possibilities and limitations of the manufacturing process. Small pore sizes were found to seriously complicate the…, Se fabricaron andamiajes cerámicos bioactivos para la regeneración ósea consistentes en una malla tridimensional de puntales interpenetrantes de sección cuadrada mediante Procesado Digital de la Luz (DLP). Se evaluó la capacidad de la técnica para fabricar estructuras porosas tridimensionales a partir de polvos de β-fosfato tricálcico (β-TCP) con diferentes dimensiones de puntales y poros, identificando las posibilidades y limitaciones del proceso de fabricación. Se observó que los tamaños de…, This work was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades, co-funded by the European Regional Development Funds [grants RTI2018-095566-B-I00 (MCIU/AEI/FEDER, UE) and MAT2015-64670-R (MINECO/FEDER, UE)]., peerReviewed



In-situ formation of ZrB2–ZrO2 ultra-high-temperature ceramic composites from high-energy ball-milled ZrB2 powders

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Zamora Rodríguez, Víctor (ORCID: 0000-0003-0102-2677)

Publicado en: Journal of Alloys and Compounds. Vol 518. pag 38-43. DOI: https://doi.org/10.1016/j.jallcom.2011.12.102, Se informa de la formación in situ de una cerámica de ultra alta temperatura (UHTC) de grano fino de ZrB2 que contiene ZrO2 distribuido uniformemente y de tamaño uniforme situado en las juntas triples y los límites de grano de los granos de ZrB2, descubierta durante la sinterización por chispa-plasma de polvos de ZrB2 sometidos a molienda de bolas de alta energía en aire. Se ha descubierto que este tipo de microestructura se forma porque la película de óxido de ZrO2, desarrollada en la…, The in situ formation is reported of a fine-grained ZrB2 ultra-high-temperature ceramic (UHTC) containing evenly distributed ZrO2 of uniform size located at triple joints and grain boundaries of the ZrB2 grains, discovered during the spark-plasma sintering of ZrB2 powders subjected to high-energy ball-milling in air. It is found that this type of microstructure forms because the oxide film of ZrO2, developed on the surface of the ZrB2 particles during the high-energy ball-milling in air, creeps…, This work was supported by the Ministerio de Ciencia y Tecnología (Government of Spain) and FEDER funds under Grant N° MAT 2007-61609, peerReviewed



Of the oxidation of ZrB2 powders during high-energy ball-milling in air

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Ortiz Seco, Ángel Luis (ORCID: 0000-0002-1797-6611)

Publicado en: Ceramics International. Con título: A study of the oxidation of ZrB2 powders during high-energy ball-milling in air. Volume 38, Issue 4, Pages 2857-2863, ISSN 0272-8842, https://doi.org/10.1016/j.ceramint.2011.11.058., Las impurezas de óxido en los polvos de ZrB2 favorecen el engrosamiento, lo que se traduce en una menor sinterabilidad. Dada su importancia para la sinterización, hemos estudiado la oxidación de los polvos de ZrB2 durante la molienda de bolas de alta energía (la forma de molienda capaz de refinar los polvos de ZrB2 hasta la nanoescala) con ayuda de varias técnicas de caracterización, a saber, fusión en gas inerte, difractometría de rayos X, picnometría de helio, microscopía electrónica de…, Oxide impurities in ZrB2 powders promote coarsening, resulting in lower sinterability. Given its importance for sintering, we studied the oxidation of ZrB2 powders during high-energy ball-milling (the form of milling able to refine ZrB2 powders to the nanoscale) with the aid of various characterization techniques, namely fusion in inert gas, X-ray diffractometry, helium pycnometry, transmission electron microscopy, and Fourier-transform infrared, Raman, and X-ray photoemission spectroscopy. It…, This work was supported by the Ministerio de Ciencia y Tecnología (Government of Spain) under Grant Nº MAT 2007-61609., peerReviewed



Enhanced human-induced pluripotent stem cell derived cardiomyocyte maturation using a dual microgradient substrate

Repositorio: Dehesa. Repositorio Institucional de la Universidad de Extremadura
Huethorst, Eline (ORCID: 0000-0001-5531-1779)

Human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CM) raise many possibilities for cardiac research but they exhibit an immature phenotype, which influences experimental outcomes. The aim of our research is to investigate the effects of a topographical gradient substrate on the morphology and function of commercially available hiPSC-CM. The lateral dimensions the microgrooves on the substrate varied from 8 to 100 μm space between the 8 μm grooves on one axis and from ∼5 nm to ∼1…, El objetivo de nuestra investigación es investigar los efectos de un sustrato con gradiente topográfico sobre la morfología y la función de hiPSC-CM disponibles en el mercado. Las dimensiones laterales las microranuras del sustrato variaron de 8 a 100 μm de espacio entre las ranuras de 8 μm en un eje y de ∼5 nm a ∼1 μm de profundidad en el otro eje. Las células se sembraron de forma homogénea en todo el sustrato y según los protocolos del fabricante. En los días 4 y 10, se tomaron medidas de…, BBSRC grant BB/K011235/1 and ERC funding through FAKIR 648892 Consolidator Award., peerReviewed