Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the use of the Theory of Critical Distances with mesh control for fretting fatigue lifetime assessment

  • Zabala, A.
  • Infante-Garcia, D.
  • Goel, S.
  • Endrino, J. L.
  • Llavori, I.
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] This work analyses the viability of the theory of critical distances (TCD) using mesh control for fretting fatigue lifetime assessment. More than seven hundred sets of simulations were performed by taking seventy different experimental tests reported previously in the literature. The outcome of the present study suggests that the TCD mesh control method can be extended to fretting fatigue problems by the reasonable assumption of setting the right element size proportional to critical distance. In this study, a significant computational time reduction of up to 97% was obtained. Thus, this study provides a simple method to design complex 3D industrial components subjected to fretting fatigue phenomena using finite element analysis efficiently without requiring complex remeshing techniques, Surface Technologies Research Group at Mondragon University gratefully acknowledge the financial support given by the Eusko Jaurlaritza under the "Programa de apoyo a la investigacion colaborativa en areas estrategicas" (Project MULTIMAT+: Ref. KK-2019/00067) program. The financial support given by the Spanish Ministerio de Ciencia, Innovacion y Universidades and the FEDER program through the projects DPI2017-89197-C2-1-R, DPI2017-89197-C2-2-R and the FPI subprogram with the reference BES-2015-072070. The support of the Generalitat Valenciana, Programme PROMETEO 2016/007, is also acknowledged. SG and JLE acknowledges the support of the "Centre for Doctoral Training in Ultra-Precision" at Cranfield University (EP/L016567/1). We would like to acknowledge the support from the Isambard Bristol, UK supercomputing service extended via the Resource Allocation Panel (RAP) grant and financial help from other grants such as RCUK (Grant No. EP/S013652/1 and EP/S036180/1), Cost Actions (CA15102 and CA18125) from H2020 and Royal Academy of Engineering (Grant No. IAPP18-19\295). JLE would like to acknowledge the Department of Economic Development and Infrastructure of the Basque Country (Elkartek Program, KK-2019/00062)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing a Comprehensive View of the Infrastructure Life Cycle through Project-Based Learning

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Montalbán-Domingo, Laura|||0000-0002-9506-0350
  • Sanz-Benlloch, Amalia|||0000-0001-8051-0649
  • Domingo Cabo, Alberto|||0000-0002-4298-2263
  • Catalá Alís, Joaquín
  • Pellicer, Eugenio|||0000-0001-9100-0644
[EN] This paper describes a teaching innovation project that adopts the project-based learning approach to introduce civil engineering students to their future professional roles and tasks throughout the infrastructure life cycle. The successful development of the whole process and completion of the infrastructure in the best technical and sustainable conditions require a comprehensive view of the infrastructure life cycle. Courses on Project Design and Project and Business Management at the B.Sc. in Civil Engineering simulated practical experiences in bidding, design, estimation, preliminary analysis, and construction planning, linking theory to professional practice. This study describes the organization of both courses to implement the simulations. To analyze the experience from the student¿s point of view, a survey examined the students¿ perceptions of the achievement of higher-order learning and their comprehensive view of the infrastructure life cycle. In addition, the learning results were compared with the students¿ perceptions. Results indicated that students are aware of the learning improvement after performing the proposed activities. In addition, this approach helps the students to develop the professional competencies needed for the curricula. The coordination of the courses to align the learning activities with the life cycle phases enables students to deepen their understanding of the phases of the infrastructure life cycle while they acquire a comprehensive view of the process. In addition, this approach has improved the motivation and engagement of the students. This teaching innovation project is easily adaptable to other engineering curricula., The authors acknowledge the financial support of the Universitat Politècnica de València (Teaching Innovation Project PIME/18-19/84).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integration of Project-Based Learning (PjBL) Methodology in the Course &quot, Bioprocesses Applied to the Environment&quot

  • Bes-Piá, M.A.|||0000-0001-8005-7450
  • Mendoza Roca, José Antonio
  • Ferrer-Polonio, Eva|||0000-0001-6412-3825
  • Iborra Clar, Alicia|||0000-0001-5937-8428
  • Zuriaga Agusti, Elena|||0000-0002-5383-1313
  • Lujan Facundo, Maria Jose|||0000-0001-6871-0584
[EN] This paper explains the steps carried out for the design of an educational innovation and the outcomes of its implementation. The innovation consists of integrating the contents of two courses ('biological wastewater treatment' and 'bioprocesses applied to the treatment of wastes') for the same academic year using project-based learning methodology to connect knowledge between subjects and to utilize transversal competences. Students from the second year of a chemical engineering master's degree worked on an open-ended project based on a current environmental problem. This methodology lets the students properly acquire several transversal competences, such as 'Design and project', 'Teamwork and leadership', and 'Effective communication', which were evaluated with rubrics. However, according to the students' perception, other skills, such as 'Comprehension and integration, analysis and problem solving', 'Knowledge of contemporary problems', and 'Planning and time management', were also worked on and improved. Based on the results from the matrix analysis and the Likert questionnaire, the organization and development of the activity were positively assessed, highlighting the importance of the lecturers' feedback. The learning outcome in terms of knowledge integration was accomplished, reaching project marks 8.5-10 on a 0-10 scale., This research was granted by Vice-Rectorate for Studies, Quality and Accreditation of the Universitat Politecnica de Valencia through the program INNOVATION AND EDUCATIONAL IMPROVEMENT PROJECTS (Reference of the projects: PIME/18-19/Ref. 91 and PIME/19-20/Ref. 150/Ref. 151/Ref. 152).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Active methods in electricity and magnetism courses: Influence of degree, academic level and gender on student performance

  • Serrano, María-Antonia|||0000-0002-1508-6893
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Quiles Casado, Susana De La Salud
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Molina Mateo, José|||0000-0002-0531-9876
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Riera Guasp, Jaime|||0000-0002-4183-7195
  • Meseguer-Dueñas, José M.
  • García-Sanchez, Tania
  • Bernal-Pérez, Soledad
  • Gámiz-González, M. Amparo
[EN] The performance of first-year students in electromagnetism (E&M) courses of different engineering degrees at a Spanish public university was measured using the Brief Electricity and Magnetism Assessment (BEMA), a standard research-based instrument to assess students' understanding after attending introductory courses in electricity and magnetism. In all cases, Flipped classroom (FC) built on information and communications technology was used. The objective of this paper is to analyse if the gain in the BEMA pre and post-test results is influenced by several factors such as the degree, the students' academic grade, and gender. Moreover, as some studies have shown that the students' retention of the concepts was significantly stronger in active learning than in traditional approaches, a third BEMA test was performed by the students to analyse the long-term retention gain dependence on the same factors. Students from different engineering degree programs were asked to complete two BEMA tests during the course and a third one after a few months. ANOVA tests were used to analyse the existence of significant differences in gain between student degree programs, student academic level and student gender. Results have shown no differences in the BEMA performance by degree program, but significant differences were found by academic level and gender. Retention did not depend on the degree course but on the academic level. Mean gain value by academic level, and gender was obtained and concluded that the best students presented the best gain results and that gain depends on the students' gender: males outperformed females in the BEMA tests, although there were no significant differences in the course grades. It is thus necessary to understand these differences and to implement measures in daily teaching work to improve women's performance., Authors would like to thank the Instituto de Ciencias de la Educacion (ICE) in the Universitat Politecnica de Valencia for their help, through the Innovation and Educational Quality Program and for supporting the team of the Innovacion en Metodologias Activas para el Aprendizaje de la Fisica (e-MACAFI) . This work has been supported by the UPV through the Project of Innovation and Educational Improvement Program (Projects PIME/18-19/76, PIME/18-19/88 and PIME/20-21/220 Convocatoria de Proyectos de Innovacion y Convergencia de la UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental analysis of propeller thrust in an undergraduate physics laboratory

  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Riera Guasp, Jaime|||0000-0002-4183-7195
  • Blasco-Pérez, Eduard
[EN] As propulsive systems are challenging for undergraduates to understand, it is essential to design experiments that can help their visualization and testing. The development of digital technology (high-speed cameras, digital tracking software, or 3D printers) facilitates the implementation of such designs. We proposed to study the thrust produced by a propeller, whose operating principles are based on the conservation of linear momentum. The study was carried out on an air track to avoid frictional forces. Several system characteristics were established, such as the propellor's rotation speed and angle of attack and different magnitudes were determined, including the dynamic thrust and static force values. 3D CAD software was used to design the propellers for the experiments, and 3D printers to produce them., We would like to thank the Instituto de Ciencias de la Educación (ICE) in the Universitat Politècnica de València for their help, through the Innovation and Educational Quality Program and for supporting the team Innovación en Metodologías Activas para el Aprendizaje de la Física (e-MACAFI). This work has been supported by the UPV through the Project of Innovation and Educational Improvement Program (Projects PIME/18-19/76 and PIME/22-23/309 Convocatoria de Proyectos de Innovación y Convergencia de la UPV).