Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Influence of Operational and Control Parameters in Thermal Response Testing of Borehole Heat Exchangers

  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Lemus Zúñiga, Lenin Guillermo|||0000-0002-6361-6019
  • Saiz Mauleón, María Begoña|||0000-0002-8650-0916
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
[EN] Thermal response test (TRT) is a common procedure for characterization of ground and borehole thermal properties needed for the design of a shallow geothermal heat pump system. In order to investigate and to develop more accurate and robust procedures for TRT control, modelling, and evaluation in semi-permeable soils with large water content, a pilot borehole heat exchanger was built in the main campus of the Universitat Politècnica de València. The present work shows the results of the experiments performed at the site, analysing the improvements that have been introduced both in the control of the heat injected during TRTs and in the methods to infer the ground thermal parameter. Three models are compared: two based on the infinite-line source theory and one based on the finite-line source scheme. The models were tested under two possible configurations of the equipment, i.e., with and without strict control of injected heat. Our results show the importance of heat injection control for a robust parameter assessment and the existence of additional heat transfer processes that the used models cannot completely characterize and that are related to the presence of significant groundwater flow at the site. In addition, our experience with the current installation and the knowledge about its strengths and weaknesses have allowed us to design a new and more complete test-site to help in the analysis and validation of new ground heat exchanger geometries., This work has received funding from the European Union’s Horizon 2020 Research and Innovation program under grant agreement Nos. (657982) and (727583).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spatial analysis of indicators affecting the exploitation of shallow geothermal energy at European scale

  • Ramos-Escudero, Adela
  • Garcia-Cascales, M. Socorro
  • Cuevas Castell, José Manuel
  • Sanner, Burkhard
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
[EN] Shallow Geothermal Energy (SGE) exploited by vertical close loop Ground Source Heat Pumps (GSHP) is a proven, reliable, and widespread renewable heating and cooling technology. However, in many regions there is still a lack of awareness among policy makers and end users, constituting a major constraint to wider deployment of SGE. In order to contribute to its market consolidation, this work focuses on bringing to light relevant spatial information affecting the suitability of SGE exploitation. This information is the result of the systematization of geological, climatic, and environmental open and available data translated into performance indicators. A set of thematic maps was created using Geographic Information Systems (GIS) comprising the European Member States and other European countries. The relative area and the amount of population affected per indicator was spatially analyzed to determine the most common values found and the affected population. The relationship between area percentage and population affected percentage per indicator was also analyzed and allowed to identify the most common indicators values in areas where high energy demands are expected. Additionally, an example of how this data can be used into a Multi-Criteria Decision-Making (MCDM) framework is shown. (c) 2020 Elsevier Ltd. All rights reserved., This work was partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO), reference TIN2017-86647-P. The authors also acknowledge the support of the Fundacion Seneca (Region of Murcia, Spain through the Grant 19882-GERM-15.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Adapted composite two-region line source methods for evaluation of borehole heat exchangers with advanced materials

  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Javadi, Hossein|||0000-0002-2059-7145
  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Armengot-Carbó, B.|||0000-0001-7424-2975
[EN] The results of a large number of Thermal Response Tests (TRTs) performed on four different borehole heat exchangers (BHEs) were analyzed to explore the effect of the novel grouting and plastic pipe materials developed in a previous project on their thermal performance. For this purpose, two versions of the composite two-region line source approach have been adapted for its use for evaluating BHEs in practical situations, allowing us to obtain more comprehensive and consistent information on key thermal parameters of ground and fillers. We develop a scheme that combines the composite two-region model with unsteady TRT injection data to avoid some shortcomings that have appeared in previous implementations of this approach. Our new method enables us to obtain parameters otherwise difficult to obtain, such as the diffusivities, heat capacities, and conductivities of ground and grout. In comparison with standard line source based analysis, it allows to improve and enrich TRT execution, with a reduction in the test time required, lower uncertainties of the parameters obtained, and a deeper understanding of the thermal properties of the grout, ground, and borehole heat exchanger as all estimates are correlated to actual physical, mensurable soil and ground properties, which allows independent critical revision and check against alternative estimation methods.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical Study on the Thermal Performance of a Single U-Tube Borehole Heat Exchanger Using Nano-Enhanced Phase Change Materials

  • Javadi, Hossein|||0000-0002-2059-7145
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Mousavi Ajarostaghi, Seyed Soheil
[EN] To investigate the impacts of using nano-enhanced phase change materials on the thermal performance of a borehole heat exchanger in the summer season, a three-dimensional numerical model of a borehole heat exchanger is created in the present work. Seven nanoparticles including Cu, CuO, Al2O3, TiO2, SiO2, multi-wall carbon nanotube, and graphene are added to the Paraffin. Considering the highest melting rate and lowest outlet temperature, the selected nano-enhanced phase change material is evaluated in terms of volume fraction (0.05, 0.10, 0.15, 0.20) and then the shape (sphere, brick, cylinder, platelet, blade) of its nanoparticles. Based on the results, the Paraffin containing Cu and SiO2 nanoparticles are found to be the best and worst ones in thermal performance improvement, respectively. Moreover, it is indicated that the increase in the volume fraction of Cu nanoparticles could enhance markedly the melting rate, being 0.20 the most favorable value which increased up to 55% the thermal conductivity of the nano-enhanced phase change material compared to the pure phase change material. Furthermore, the blade shape is by far the most appropriate shape of the Cu nanoparticles by considering about 85% melting of the nano-enhanced phase change materia, This research work has been supported financially by the European project GEOCOND (funded by the European Union's Horizon 2020 research and innovation program under grant agreement No 727583) and by the European project GEO4CIVHIC (funded by the European Union's Horizon 2020 research and innovation program under grant agreement No 792355).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of advanced materials guided by numerical simulations to improve performance and cost-efficiency of borehole heat exchangers (BHEs)

  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Lemus Zúñiga, Lenin Guillermo|||0000-0002-6361-6019
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
  • Sanner, Burkhard
  • Cuevas, José Manuel
  • Bartoli, Flavia
  • Ciardelli, Francesco
  • González, Rosa M.
  • Ghafar, Ali Nejad
  • Fontana, Patrick
[EN] One promising way to improve the efficiency of borehole heat exchangers (BHEs) in shallow geothermal applications is to enhance the thermal properties of the materials involved in its construction. Early attempts, such as using metal tubes in the 1980s or the utilization of thin-foil hoses, did not succeed in being adopted by the market for diverse reasons (cost, corrosion, fragility, etc...). In parallel, the optimization of pipe size, the use of double-U-tubes, thermally enhanced grout, etc. were able to bring the measure for the BHE efficiency, the borehole thermal resistance, from 0.20 to 0.15 K/(Wm) down to 0.08-0.06 K/(Wm) in the best solutions today. A further improvement cannot be expected without development of new, dedicated materials, combining the versatility of plastic like PE with an increased thermal conductivity that matches the respective properties of the rock and soil. This goal was included in the Strategic Research and Innovation Agenda of the European Technology Platform on Renewable Heating and Cooling in 2013. Within an EU supported project, both BHE pipes and grouting materials have been produced prototypically in small amounts, suitable for the first tests in the intended environment. The present work explains the research pathways envisaged and the resulting sensitivity analysis to highlight the influence of some of the most critical parameters that affect the overall performance of a GSHP system. The results have allowed guiding the real development of more efficient new advanced materials for different scenarios representative of different European regions. Finally the developed materials and their properties are discussed, including a comparative assessment about their compliance with reference material properties as currently seen in the BHE market., This article is part of a project that has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 727583.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Laboratory and numerical study on innovative grouting materials applicable to borehole heat exchangers (BHE) and borehole thermal energy storage (BTES) systems

  • Javadi, Hossein|||0000-0002-2059-7145
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Lemus Zúñiga, Lenin Guillermo|||0000-0002-6361-6019
  • Ghafar, Ali Nejad
  • Arun Chaudhari, Ojas
  • Zirgulis, Giedrius
[EN] In this study, a laboratory-scale prototype of a borehole field has been designed and built to assess various innovative grouting products in a fully controlled environment. Three novel grout formulations are developed and evaluated: enhanced grout, a mixture of enhanced grout and microencapsulated phase change material, and a mixture of enhanced grout and shape stabilized phase change material. The objective is to evaluate the enhancement in their thermal properties (i.e., thermal conductivity and thermal energy storage capacity) compared to those using a commercial reference grout. Besides, threedimensional numerical modeling is performed to provide a better understanding of the heat transfer and phase transition inside and outside the grout columns and to study the capability of the developed grouts to be used in a borehole heat exchanger or as borehole thermal energy storage system. To the best of the authors' knowledge, there have been just a few numerical studies on using phase change materials inside borehole heat exchangers to assess thermal energy storage applications. The experimental and numerical results showed much higher efficiency of the grout developed with a high thermal conductivity than the reference grout in terms of heat transfer in both the grout column and the surrounding sand. Furthermore, the results indicated the noticeable influence of the microencapsulated phase change material's presence in the grout formulation in terms of heat absorption/storage during the phase transition (from solid to liquid). However, it is concluded that reengineering shape stabilized phase change material should be conducted to make it more appropriate for thermal energy storage applications, This article is part of a project that has received funding from the European Union's Horizon 2020 research and innovation pro-gramme under grant agreement No 727583.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Use of advanced pipe and grout materials in an experimental Single-U BHE: Installation procedure assessment and thermal properties comparison using C2RLSM

  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Armengot-Carbó, B.|||0000-0001-7424-2975
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
  • Cuevas-Castell, José Manuel
  • Sanner, Burkhard
[EN] The performance of a Shallow Geothermal Energy System (SGES) is significantly influenced by the materials that conform its borehole heat exchangers (BHEs). Traditionally, plastic pipes and cement-based grouts, originally developed for other applications, have been employed in these systems due to their accessibility and ease of installation. However, these materials impose certain efficiency limitations. This article reports the installation process of two BHEs using new grout and pipe materials designed to increase their suitability for SGE systems. The validation process included material characterization tests during installation. Once installed, the new boreholes were compared with a reference BHE (based on standard pipes and grout) by performing standard Thermal Response Tests (TRT) on each borehole at the same thermal power injection rate. The Composite 2 Region Line Source Model (C2RLSM) has been used to analyse the TRT data. C2RLSM gives plausible estimates on the thermal properties of the ground and the BHE, including a comparable borehole thermal resistance R*b. We report improved R*b from 0.15 mK/W for standard materials to 0.1 mK/W for new materials. The use of these materials could imply CAPEX reductions of more than 20% in common BHE., This work has received funding from the European Union s Horizon 2020 Research and Innovation program under grants agreement No [792355] and No [727583].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

How Reliable Are Standard Thermal Response Tests? An Assessment Based on Long-TermThermal Response Tests Under Different Operational Conditions

  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
  • Lemus Zúñiga, Lenin Guillermo|||0000-0002-6361-6019
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Cuevas-Castell, José Manuel
[EN] In this contribution, we analyze the results of a number of thermal response test (TRT) experiments performed during several years at the same location at our university campus in Valencia (Spain), a permeable saturated soil area with possible groundwater flow conditions. A combination of different heat injection rates, TRT operation times of up to 32 days, and various methods for parameter estimation of ground thermal properties have been applied to study their influence on the result and accuracy of TRTs. Our main objective has been to experimentally quantify the influence of groundwater flow heat advection using moving infinite and finite line-source theories, as well as to analyze the influence of factors such as test duration, sensor accuracy, and external thermal influences. We have shown that the traditionally used infinite and finite line-source models, as well as the moving line-source models, can accurately represent experimental temperature evolution, but that there are many caveats regarding the significance parameters extracted and its reproducibility and stability. These features can be improved if data from the first test days are disregarded for the analysis, obtaining a much faster convergence to the definitive soil parameter estimates, including the effective Peclet number that represents groundwater flow in our particular case., This research was funded by the European Union's Horizon 2020 Research and Innovation program under grant agreement No [657982] and [727583].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of Employing Hybrid Nanofluids as Heat Carrier Fluid on the Thermal Performance of a Borehole Heat Exchanger

  • Javadi, Hossein|||0000-0002-2059-7145
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Ajarostaghi, Seyed Soheil Mousavi
[EN] In this numerical study, 4 types of hybrid nanofluid, including Ag-MgO/water, TiO2-Cu/water, Al2O3-CuO/water, and Fe3O4-multi-wall carbon nanotube/water, have been considered potential working fluid in a single U-tube borehole heat exchanger. The selected hybrid nanofluid is then analyzed by changing the volume fraction and the Reynolds number. Based on the numerical results, Ag-MgO/water hybrid nanofluid is chosen as the most favorable heat carrier fluid, among others, considering its superior effectiveness, minor pressure drop, and appropriate thermal resistance compared to the pure water. Moreover, it was indicated that all cases of Ag-MgO/water hybrid nanofluid at various volume fractions (from 0.05 to 0.20) and Reynolds numbers (from 3200 to 6200) could achieve better effectiveness and lower thermal resistances, but higher pressure drops compared to the corresponding cases of pure water. Nevertheless, all the evaluated hybrid nanofluids present lower coefficient of performance (COP)-improvement than unity which means that applying them as working fluid is not economically viable because of having higher pressure drop than the heat transfer enhancement., This research work has been supported financially by the European project GEOCOND (funded by the European Union's Horizon 2020 research and innovation program under grant agreement No 727583) and by the European project GEO4CIVHIC (funded by the European Union's Horizon 2020 research and innovation program under grant agreement No 792355).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

New trilobular geometry using advanced materials for experimentally validated enhanced heat transfer in shallow geothermal applications

  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Armengot-Carbó, B.|||0000-0001-7424-2975
  • Javadi, Hossein|||0000-0002-2059-7145
[EN] The Adapted Conductivity Trilobular (ACT) design, comprising an up -flow central pipe and three satellite downward pipes, represents a novel configuration of a borehole heat exchanger. The novelty lies not only in the geometry of the heat exchanger, but also in the use of materials perfectly adapted to the thermal use for which they have been specified. The central pipe is constructed of a composite bilayer material with very low thermal conductivity, whereas the satellite pipes are based on a novel highly conductive plastic material. The primary objective behind this design was to simplify installation, by using essentially the same drilling and grouting methods used for conventional single -U or double -U borehole heat exchangers. In response to the rising demand for more efficient and affordable ground heat exchangers to be connected to Ground Source Heat Pump (GSHP) systems, this innovation was one of the promising outcomes of the GEOCOND European project. To assess ACT performance, the Geothermal Laboratory on the campus of the Universitat Politecnica de Valencia conducted a number of thermal response tests (TRTs), the experimental results of which are collected and analyzed in this paper. Additionally, a modified version of the Composite Two Region Line Source modeling scheme is described and used to assess the experimental data. A total of four demonstration boreholes - two single -U baseline and two ACT boreholes - have been tested. The experimental investigation using the C2RLS methodology reveals that the ACT configuration has a significantly lower thermal than the typical BHE arrangement and allows a greater specific heat injection rate. Specifically, a borehole resistance drop from 0.149 (m.K)/W to 0.07 (m.K)/W allowing higher injection rates to be achieved without an unsustainable increase in ground temperature. These findings may have significant implications for the development of more efficient and cost-effective GSHP systems., This work was developed within the European project GEOCOND and continued with the European project GEO4CIVHIC, funded by the European Union's Horizon 2020 research and innovation program, under grant agreement s No 727583 and No 792355, respectively.Acknowledgment to the support from the Program for the Re-qualification of the Spanish university system for 2021-2023 (in the framework of the call of the Universitat Politecnica de Valencia) , subsidized by the European Recovery Instrument (financed by the European Union by Next Generation EU) in the framework of the Spanish Recovery, Transformation and Resilience Plan, through the Ministry of Universities, regulated by RD 289/2021 and Order UNI/551/2021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermodynamic Performance Analysis of High Thermal Conductivity Materials in Borehole Heat Exchangers in the European Climate

  • Khattak, Sanober
  • Sanner, Burkhard
  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
[EN] While heat pumps have been acknowledged as a key enabling technology to achieve Net Zero goals, their uptake is limited by their performance and cost. In this paper, a simulation-based study is conducted to analyse the performance of ground source heat pumps (GSHPs) utilising high thermal conductivity materials for the borehole heat exchanger (BHE) pipe (1 W/mK) and grouting (3 W/mK) developed in the GEOCOND project. Exergy analysis is conducted to account for energy quantity and quality with a focus on BHE performance. An annual hourly simulation was performed using DesignBuilder V5.4 and Earth Energy Designer (EED4) for representative cool and hot locations in Europe-Stockholm and Valencia, respectively. For a constant BHE length, the results for Stockholm show that the high conductivity materials result in an increase of about 13% BHE exergy extraction compared to the standard grout and pipe, but no such improvement was observed for Valencia. The difference between outdoor temperature and its dynamic variation from the indoor setpoint is identified as a key factor in the overall GSHP exergetic performance. In future research, we propose a thorough life cycle analysis across diverse locations and varying indoor comfort criteria to pinpoint areas where the high thermal conductivity material can enable cost-effective, sustainable heating and cooling., This research work has been supported financially by the European project GEOCOND (funded by the European Union's Horizon 2020 research and innovation program under grant agreement No. 727583) and by the European project GEO4CIVHIC (funded by the European Union's Horizon 2020 research and innovation program under grant agreement No. 792355).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Theoretical and experimental cost-benefit assessment of borehole heat exchangers (BHEs) according to working fluid flow rate

  • Badenes Badenes, Borja|||0000-0002-3469-9265
  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Magraner, Teresa|||0000-0001-5292-1432
  • Soriano Olivares, Javier|||0000-0003-1649-102X
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
[EN] In ground-source heat-pump systems, the heat exchange rate is influenced by various design and operational parameters that condition the thermal performance of the heat pump and the running costs during exploitation. One less-studied area is the relationship between the pumping costs in a given system and the heat exchange rate. This work analyzes the investment and operating costs of representative borehole heat-exchanger configurations with varying circulating flow rate by means of a combination of analytical formulas and case study simulations to allow a precise quantification of the capital and operational costs in typical scenario. As a conclusion, an optimal flow rate minimizing either of both costs can be determined. Furthermore, it is concluded that in terms of operating costs, there is an operational pumping rate above which performance of geothermal systems is energetically strongly penalized., This research work has been supported financially by the European project GEOCOND (funded by the European Union's Horizon 2020 research and innovation program under grant agreement No 727583) and by the European project GEO4CIVHIC (funded by the European Union's Horizon 2020 research and innovation program under grant agreement No 792355).