Skip to main content

Procesamiento Coloidal y Caracterización de Semiconductores Cerámicos

IJCI-2016-28538

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Incorporación
Call Juan de la Cierva Incorporación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of SrR delivery in the biomarkers of bone regeneration during the in vitro degradation of HNT/GN coatings prepared by EPD

  • Abdollahi Boraei, S. B.
  • Nourmohammadi, J.
  • Sadat Mahdavi, F.
  • Yus, Joaquín
  • Ferrández-Montero, Ana
  • Sánchez-Herencia, A. Javier
  • González Granados, Zoilo
  • Ferrari, Begoña
[EN] Among strontium-based drugs, the Strontium ranelate (SrR) is a divalent strontium salt of ranelic acid which has an overall effect over the bone microarchitecture improvement. However, some findings reveal that the SrR affects in an opposite manner to the cell proliferation and osteoblastic differentiation, based on its concentration. Consequently, its release should be controlled. The incorporation of Halloysite nanotubes (HNT) as nanocarriers of SrR, into gelatine (GN) coatings, tailors the release of this anabolic bone-forming and anti-catabolic agent to stimulate bone growth. In fact, as-prepared GN/HNT-SrR coatings release 100 % SrR in phosphate buffered saline (PBS) within 21 days, and cellular studies of the nanocomposite coatings (MTT, Alkaline Phosphatase activity (ALP) and Calcium deposition assay) confirm the valuable bio-performance of these composite coatings to enhanced bone regeneration. In the present manuscript, suspensions with HNT/GN weight ratio of 0.5 are formulated to coat AISI 316 L stainless steel foils by Electrophoretic Deposition (EPD). Zeta potential determination is used to stablish the drug loading (HNT-SrR) by electrostatic interaction, as well as to optimize the dispersion of bare HNT and HNT SrR-loaded in a GN aqueous solution. Polyethilenimnine (PEI) is used as stabilizer to buffer the suspension media, assure cargo-drug dispersion and sequential release, while the thermal gelling of the suspension controls and step up the coating formation during EPD., The authors would like to thank the University of Tehran, Tehran, Iran for support and technical assistance, and the financial support of Comunidad de Madrid: ADITIMAT: S2018/NMT-4411, and M-ERA.NETPCIN-2017-036 and IJCI-2016-28538 (MICINN, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heteroacoagulation of lignocellulose fibers-based biotemplates and functionalized TiO2 nanoparticles to tailor film microstructures

  • González Granados, Zoilo
  • Yus, Joaquín
  • Bravo, Yessica
  • Sánchez-Herencia, A. Javier
  • Rodríguez, Alejandro
  • Dewalque, Jennifer
  • Manceriu, Laura
  • Henrist, Catherine
  • Ferrari, Begoña
[EN] The heterocoagulation of lignocellulose nanofibers (LCNFs) with functionalized TiO nanoparticles (NPs) is presented as an innovative revalorization strategy for the exploitation of lignocellulose wastes. Their use as bio-templates could be considered a promising alternative in a current biorefinery scheme, since the massive production of porous materials in numerous nanotechnological applications, could offer new alternatives of exploitation. The surface modification of TiO NPs by adsorption of polyetilenimine (PEI) favors its anchorage with LCNFs through a peptide bond during heterocoagulation in aqueous suspension. The functionalization of LCNFs with TiO NPs results in organic–inorganic core–shell nanostructures, used to shape coatings by dipping, and sinter them at low temperature (450 °C). In this process, the LCNFs were used as endo-templates for shaping stable porous coatings, when they burn during the consolidation of the inorganic structure. In this work, the successful inclusion and homogeneous distribution of biomaterials (LCNF templates) in the semiconductor inorganic microstructure is discussed in terms of dye loading (by UV–Visible Spectroscopy), photovoltaic efficiency and charge transfer (by Electrochemical Impedance Spectroscopy, EIS) in a Dye Sensitized Solar Cell (DSSC). Results confirm that the TiO/template network yielded better photoefficiency and electron transport properties than mesoporous films assembled only from TiO NPs. The preparation of TiO-based photoanodes with enhanced performance (with an efficiency value around 6%, for a thickness of 8.7 µm) allows validating the successful colloidal procedure herein employed., The authors thank the support to the projects S2018/NMT-4411 (Comunidad de Madrid) and MAT2015-70780-C4-1 (MINECO/FEDER). Z. Gonzalez acknowledges to the European Ceramic Society for the funds of the ‘‘Frontiers of Research’’ program and also to the Spanish Ministry of Economy and Competitiveness for the Postdoctoral Fellowship: IJCI-2016-28538
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding the effects of different microstructural contributions in the electrochemical response of Nickel-based semiconductor electrodes with 3D hierarchical networks shapes

  • Yus, Joaquín
  • Ferrari, Begoña
  • Sánchez-Herencia, A. Javier
  • González Granados, Zoilo
[EN] It is well known that exposed surface area, nanoparticles connectivity and its consolidation level in a nanostructure are key points in the enhancement of the electrochemical performance in energy storage devices. The design and optimization of different electrodes with specific microarchitectures (based on the arrangement manipulation of NiO nanoplatelets, used as building blocks), has allowed distinguishing the effects of each microstructural contribution in their final electrochemical responses, overpassing thermal and mechanical mismatches between the semiconductor ceramic structure and the metallic collector. In all cases, the same electroactive material and the same coating technique were used, preventing the interference of secondary phenomena in the EIS studies, and allowing argue over the contribution of the microstructural features incorporated to the electrode (nature and shape of the collector, degree of sintering and consolidation of the ceramic microstructure, incorporation of non-noble metallic nanoparticles and the macro/meso/microposity effect) in the effective profiting of the Faradaic phenomena observed during their cycling. The modification of the Ni-based electrodes allows understanding how microstructural features infer the electron transport and the ion diffusion through the consolidated structure. The EIS analysis proves that the design of the porous hierarchical network of our semiconductors electrodes resulted in a good rate capability (with capacitance values of 1000 F g¿1 or 500 C g¿1), exhibiting a relaxation time constant (¿0 = 18 ms), while a slight increase of the charge-transfer resistance (Rct = 3.65¿) is negligible if the exposed surface is high enough to maintain a high ion transport. The inclusion of non-noble nanoparticles, such as Ni NPs, in the NiO semiconductor microstructure and the optimum deposited mass and sintering treatment create a metal-ceramic electrode that enhances both the charge transfer resistance (1.55 ¿) showing relaxation time in the range (¿0 = 11 ms) and maintaining an excellent capacitive behavior (750 F g¿1 or 375C g¿1) at quick charge/discharge rate., 2018/NMT-4411(Comunidad de Madrid, Spain) and MAT2015-70780-C4-1(MINECO/FEDER, Spain). J. Yus acknowledges the Comunidad de Madrid for the support from the Youth Employment Initiative,CAMPD17_ICV_002. Z. Gonzalez acknowledges the Postdoctoral Fellowship: IJCI-2016-28538 (MINECO, Spain)