Skip to main content

DISEÑANDO UNA INFRAESTRUCTURA DE RED 5G DEFINIDA MEDIANTE CONOCIMIENTO HACIA LA PROXIMA SOCIEDAD DIGITAL-B

TEC2017-90034-C2-2-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Orchestrating virtual slices in data centre infrastructures with optical DCN

  • Pagès Cruz, Albert|||0000-0002-6661-3630
  • Agraz Bujan, Fernando|||0000-0001-8958-0088
  • Montero Herrera, Rafael
  • Landi, Giada
  • Capitani, Marco
  • Gallico, Domenico
  • Biancani, Matteo
  • Nejabati, Reza
  • Simeonidou, Dimitra
  • Spadaro, Salvatore|||0000-0002-4100-1726
The emergence of new paradigms and services is pushing the limits of nowadays cloud infrastructures. It is a fact that current solutions lack in the flexibility and configurability to adapt to heterogeneous requirements coming from the applications/services to be supported over them. This results most of the time in severe underutilization of the underlying physical substrate. In light of this, newer approaches on resource provisioning and infrastructure management are needed. The Infrastructure as a Service (IaaS) paradigm is proposed as a solution to overcome these limitations. Thanks to IaaS, the physical infrastructure is partitioned onto virtual slices, encompassing heterogeneous resources (e.g. network, computing). Such a concept is expected to be harnessed by future data center (DC) infrastructures in order to cope efficiently with multi-tenancy as well as heterogeneous application requirements. However, current DC networks (DCNs) impose sever limitations onto traffic handling to fully exploit this vision. In light of this, optical technologies are seen as prime candidates for realizing the high performance network fabrics that future DC architectures will need. Under such an umbrella, it becomes primordial to develop specific provisioning solutions that account for the particularities of the optical medium, while providing the means to efficiently slice the DC infrastructure. With all of these in mind, in this article we present a solution for orchestrating and controlling virtual slices in a DC scenario with optical intra-DCN, with the scope of optimizing the underlying physical infrastructure utilization. The benefits of the presented solution are demonstrated against legacy architectures through exhaustive experiments and simulations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Route, modulation format, MIMO and spectrum assignment in Flex-Grid/MCF transparent optical core networks

  • Rumipamba Zambrano, Rubén Darío
  • Perelló Muntan, Jordi|||0000-0001-6563-2664
  • Spadaro, Salvatore|||0000-0002-4100-1726
In this paper, we target an optimal multiple-input multiple-output digital signal processing (MIMO-DSP) assignment to super-channels affected by intercore crosstalk (ICXT) in multicore fiber (MCF) enabled transparent optical core networks. MIMO-DSP undoes ICXT effects, but can be costly with high core density MCFs. Hence, its implementation in the network must be carefully decided. We address our objective as a joint route, modulation format, MIMO and spectrum assignment (RMMSA) problem, for which integer linear programming formulations are provided to optimally solve it in small network scenarios. Moreover, several heuristic approaches are also proposed to solve large-scale problem instances with good accuracy. Their goal is to minimize both network spectral requirements and the amount of MIMO equalized super-channels, taking a crosstalk-free space division multiplexing (SDM) solution as a reference, for example, based on parallel single mode fibers [i.e., a multifiber (MF) scenario]. For our evaluation, we consider several state-of-the-art MCF prototypes and different network topologies. The obtained results, with the considered MCFs, disclose that in national backbone networks, the desirable percentage of super-channels with MIMO equalization to match the performance of an equivalent crosstalk-free SDM solution ranges from 0% to 36, while in continental-wide networks this range raises from 0% to 56%. In addition, in the case of a nonideal MIMO (with a 3 dB/km of crosstalk compensation), such percentages range from 0% to 28% and from 0% to 45% in national and continental-wide backbone networks, respectively, experimenting a performance gap up to 12% with respect to the MF reference scenario., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optimal design of cost-effective OXC and ROADM nodes to maximize the throughput of mesh-based u-DWDM metro-access networks

  • Sarmiento Hernández, Samael|||0000-0001-6549-8426
  • Pagès Cruz, Albert|||0000-0002-6661-3630
  • Spadaro, Salvatore|||0000-0002-4100-1726
  • Lázaro Villa, José Antonio|||0000-0002-5592-8434
Final published version of the article can be found at: https://dl.acm.org/doi/abs/10.1007/s11107-023-01000-5, Metro-access networks will play a primary role in future network fabrics, enabling connectivity among different actors such as 5G-based radio stations, edge datacenters, businesses, and home users. To provide such heterogeneous connectivity, changes to the current metro-access networks to provide them with greater scalability, higher levels of dynamic connectivity and flexibility, reduced end-to-end latency, and increased energy efficiency are required. In this context, mesh-based ultra-dense wavelength division multiplexing (u-DWDM) metro-access networks using reconfigurable optical switching nodes constitute a promising solution. However, the designs of traditional optical switching nodes are based on wavelength selective switches (WSSs), which provide high network reconfigurability only at a high cost, making them prohibitive for metro-access networks. Moving away from this design approach, a novel cost-effective and energy-efficient reconfigurable optical add-drop multiplexer (ROADM) node design built using a modular DWDM structure was recently proposed for ring-based u-DWDM metro-access networks, showing promising performance. This paper presents an optical node design for optical cross-connects (OXCs) utilizing a modular DWDM structure, with the objective of providing performance close to that of WSS-based OXCs but at a lower cost. With this target in mind, the optimal design of mesh-based u-DWDM metro-access networks was also studied using DWDM OXCs and ROADMs, with the aim of maximizing the network throughput while minimizing the hardware required to implement the switching nodes. To this end, both exact and heuristic mechanisms are presented to address the optimal network design. The results show a maximum network performance reduction of just 10% in the DWDM case compared to the WSS-based case with a switching node cost reduction in one order magnitude., FUNDING: This work was supported by the ALLIANCE (TEC2017-90034-C2-2-R) project co-funded by FEDER., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High capacity converged passive optical network and RoF-based 5G+ fronthaul using 4-PAM and NOMA-CAP signals

  • Sarmiento Hernández, Samael|||0000-0001-6549-8426
  • Delgado Mendinueta, José Manuel
  • Altabas Navarro, Jose Antonio
  • Spadaro, Salvatore|||0000-0002-4100-1726
  • Shinada, Satoshi
  • Furukawa, Hideaki
  • Vegas Olmos, Juan José
  • Lázaro Villa, José Antonio|||0000-0002-5592-8434
  • Wada, Naoya
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Network architectural changes to satisfy all the 5G+ mobile network specifications and requirements are necessary due to the popularization of streaming and cloud applications on omnipresent portable devices. The combination of massive installation of micro-cell antenna sites with the cloud access radio network (C-RAN) architecture has recently been nominated as a promising technology for high-capacity mobile fronthaul links, albeit at a high cost. An alternative approach for next-generation fronthaul networks is to utilize the already deployed passive optical networks (PONs) where wireless and wired services may coexist in a converged manner. Non-orthogonal multiple access (NOMA) modulation with multi-band carrierless amplitude and phase modulation (NOMA-CAP) has recently been investigated as a promising 5G+ modulation format candidate to increase the capacity and flexibility of future mobile networks. Here, we experimentally demonstrate the convergence of a NOMA-CAP wireless waveform with a single-carrier wired signal in a PON scenario using radio-over-fiber (RoF) technology. Specifically, fifteen NOMA-CAP bands, with two NOMA power levels to double the capacity, transmit 15 Gb/s multiplexed with a digital 10 Gb/s four-level pulse amplitude modulation (PAM-4) signal for downlink application. Two converged system implementations have been considered, first using electrical frequency division multiplexing (EFDM) and secondly using the hybrid EFDM-wavelength division multiplexing (EFDM-WDM). Successful transmission through a 25 km span of standard single-mode fiber is achieved with negligible transmission penalty for both proposed converged solutions., This work was supported in part by ALLIANCE (TEC2017-90034-C2-2-R) project co-funded by FEDER, the European Union’s Horizon 2020 research and innovation programme under grant agreements no 761989 and 871900 (5G-PHOS and 5G-COMPLETE), as well as MINECO, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optical power budget enhancement in 50-90 Gb/s IM-DD PONs with NOMA-CAP and SOA-Based amplification

  • Delgado Mendinueta, José Manuel
  • Altabas, Jose Antonio
  • Spadaro, Salvatore|||0000-0002-4100-1726
  • Shinada, Satoshi
  • Furukawa, Hideaki
  • Vegas Olmos, Juan José
  • Lázaro Villa, José Antonio|||0000-0002-5592-8434
  • Wada, Naoya
  • Sarmiento Hernández, Samael|||0000-0001-6549-8426
We report experimental results of a semiconductor optical amplifier (SOA) for optical amplification in a 50-90 Gb/s IM-DD optical access system using non-orthogonal multiple access multiplexing combined with multi-band carrierless amplitude phase modulation format (NOMA-CAP). Specifically, the SOA has been investigated as both booster and pre-amplifier for downstream applications in PONs. The measured optical power budgets resulting from performing booster amplification and pre-amplification simultaneously, assuming a BER threshold at 2.2 × 10 -3 , are 28.7(23.7) dB and 23.6(18.9) dB at 50(90) Gb/s for the strong and weak NOMA levels, respectively, compared to the budgets for the strong and weak NOMA levels of 12.4(8.7) dB and 9.4(5.2) dB when no optical amplification is used., This work was supported in part by ALLIANCE (TEC2017-90034-C2-2-R) project co-funded by FEDER, the European Union’s Horizon 2020 research and innovation programme under grant agreement no 780997 (plaCMOS), as well as MINECO FPI-BES-2015-074302., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Real-time maintenance of latency-sensitive 5G services through network slicing

  • Montero Herrera, Rafael
  • Agraz Bujan, Fernando|||0000-0001-8958-0088
  • Pagès Cruz, Albert|||0000-0002-6661-3630
  • Spadaro, Salvatore|||0000-0002-4100-1726
This is a post-peer-review, pre-copyedit version of an article published in Photonic Network Communications. The final authenticated version is available online at: http://dx.doi.org/10.1007/s11107-020-00897-6., Network Slicing appears as one of the enabling technologies for 5G networks to accommodate services with different requirements and availability. The present work, seizes the use of network slicing and focuses on the deployment and maintenance of services which are sensitive to latency constraints. For this purpose, the design and use of a VNF Latency-sensor are presented, considering its aggregation to the internal chain of services and the retrieval of latency data from the sensor. In this way, and by making use of such data, the expected service performance can be guaranteed. A multi-level orchestration and control architecture is then introduced to provide all the required functionalities for this mechanism. In order to assess this method experimentally, an emulated multi-segment testbed, considering specific 5G network segments (i.e., Access, Metro and Core), is used. The experimental results demonstrate the correct latency sensing of a particular slice and the process of service maintenance through the triggering of proper network actuations such as path reconfiguration or slice reallocation, This work has been supported by the H2020 5GPPP SLICENET project (H2020-ICT-2016-2/761913) and the Spanish Government through project ALLIANCE-B (TEC2017-90034-C2-2-R) with FEDER contribution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Results and achievements of the ALLIANCE Project: New network solutions for 5G and beyond

  • Careglio, Davide|||0000-0002-7931-8147
  • Spadaro, Salvatore|||0000-0002-4100-1726
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Lázaro Villa, José Antonio|||0000-0002-5592-8434
  • Barlet Ros, Pere|||0000-0001-7837-0886
  • Gené Bernaus, Joan M.|||0000-0002-1082-9408
  • Perelló Muntan, Jordi|||0000-0001-6563-2664
  • Agraz Bujan, Fernando|||0000-0001-8958-0088
  • Suárez-Varela Maciá, José Rafael|||0000-0002-7141-3414
  • Pagès Raventós, Albert
  • Paillissé Vilanova, Jordi|||0000-0001-7733-9713
  • Almasan Puscas, Felician Paul|||0000-0003-3903-6759
  • Domingo Pascual, Jordi|||0000-0001-6277-7542
  • Solé Pareta, Josep|||0000-0002-9411-6308
Leaving the current 4th generation of mobile communications behind, 5G will represent a disruptive paradigm shift integrating 5G Radio Access Networks (RANs), ultra-high-capacity access/metro/core optical networks, and intra-datacentre (DC) network and computational resources into a single converged 5G network infrastructure. The present paper overviews the main achievements obtained in the ALLIANCE project. This project ambitiously aims at architecting a converged 5G-enabled network infrastructure satisfying those needs to effectively realise the envisioned upcoming Digital Society. In particular, we present two networking solutions for 5G and beyond 5G (B5G), such as Software Defined Networking/Network Function Virtualisation (SDN/NFV) on top of an ultra-high-capacity spatially and spectrally flexible all-optical network infrastructure, and the clean-slate Recursive Inter-Network Architecture (RINA) over packet networks, including access, metro, core and DC segments. The common umbrella of all these solutions is the Knowledge-Defined Networking (KDN)-based orchestration layer which, by implementing Artificial Intelligence (AI) techniques, enables an optimal end-to-end service provisioning. Finally, the cross-layer manager of the ALLIANCE architecture includes two novel elements, namely the monitoring element providing network and user data in real time to the KDN, and the blockchain-based trust element in charge of exchanging reliable and confident information with external domains., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness under contract FEDER TEC2017-90034-C2 (ALLIANCE project) and by the Generalitat de Catalunya under contract 2017SGR-1037 and 2017SGR-605., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Experimental assessment of 10 Gbps 5G multicarrier waveforms for high-layer split U-DWDM-PON-based fronthaul

  • Sarmiento Hernández, Samael|||0000-0001-6549-8426
  • Altabas, Jose Antonio
  • Spadaro, Salvatore|||0000-0002-4100-1726
  • Lázaro Villa, José Antonio|||0000-0002-5592-8434
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The current constant growth in mobile networks' traffic demands caused by the popularization of cloud and streaming services on personal devices, requires architectural changes so as to fulfill all new 5G mobile network requirements. Cloud access radio network (C-RAN) architecture in combination with the massive deployment of small cell antenna sites have recently been proposed as a promising solution but will be demanding for high-capacity mobile fronthaul links. An efficient way for performing that connectivity is to make use of the dense wavelength multiplexing passive optical network (DWDM-PON) infrastructure. In this context, orthogonal frequency division multiplexing (OFDM) has been extensively explored as a potential candidate. Nevertheless, the main drawback of OFDM is its high out-of-band radiation. In order to overcome that drawback, new 5G multicarrier waveforms (FBMC, UFMC, and GFDM) have recently been proposed. In this paper, we experimentally assess and compare 10 Gbps 32-QAM-OFDM/FBMC/UFMC/GFDM system performance for high-layer split ultra-DWDM-PON-based fronthaul using a radio-over-fiber technique. The performance has been done in terms of spectral efficiency, peak-to-average power ratio, spectral density, and receiver sensitivity. In particular, intensity-modulation with direct-detection and quasi-coherent-detection have been considered. In order to improve the multicarrier system energy efficiency, the effect of using a hard clipping technique over transmitted signals is also studied. Finally, we evaluated the crosstalk interference between two adjacent channels of the same modulation scheme, as a function of their electrical frequency span for downlink application., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Split-enabled 350–630 Gb/s optical interconnect with direct detection NOMA-CAP and 7-core multi-core fiber

  • Sarmiento Hernández, Samael|||0000-0001-6549-8426
  • Delgado Mendinueta, José Manuel
  • Altabas, Jose Antonio
  • Spadaro, Salvatore|||0000-0002-4100-1726
  • Shinada, Satoshi
  • Furukawa, Hideaki
  • Vegas Olmos, Juan José
  • Lázaro Villa, José Antonio|||0000-0002-5592-8434
  • Wada, Naoya
The ever-growing data traffic volume inside data centers caused by the popularization of cloud services and edge computing demands scalable and cost-efficient network infrastructures. With this premise, optical interconnects have recently gained more and more research attention as a key building block to ensure end-to-end energy efficient solutions, offering high throughput, low latency and reduced energy consumption compared to current networks based on active optical cables. An efficient way for performing such optical interconnects is to make use of multi-core fibers (MCFs), which enables the multiplexing of several spatial channels, each using a different core inside the same fiber cladding. Moreover, non-orthogonal multiple access combined with multi-band carrierless amplitude and phase modulation (NOMA-CAP) has been recently proposed as a potential candidate to increase the network capacity and an efficiency/flexibility resource management. In this paper, using direct detection we experimentally demonstrate the transmission of NOMA-CAP signals through a 2 km MCF with 7 spatial channels for high capacity optical interconnect applications. The results show negligible transmission penalty for different total aggregated traffics ranging from 350 Gb/s to 630 Gb/s., This work was supported in part by ALLIANCE (TEC2017-90034-C2-2-R) project co-funded by FEDER, the European Union’s Horizon 2020 research and innovation programme under grant agreement no780997 (plaCMOS), as well as MINECO FPI-BES-2015-074302, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Applying cognitive dynamic learning strategies for margins reduction in operational optical networks

  • Notivol Calleja, Luis David
  • Spadaro, Salvatore|||0000-0002-4100-1726
  • Perelló Muntan, Jordi|||0000-0001-6563-2664
  • Junyent Giralt, Gabriel|||0000-0003-0059-7700
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Today's optical transport networks are complex already and the support of the new arising services will further increase such complexity. Traditional deterministic network procedures will need to be revisited, especially their operations. Network Operators will require more dynamic approaches to get the best out of their infrastructure. In this context, cognition and machine learning techniques can provide innovative management solutions for traditional telecom operators. In this paper, we explore a dynamic cognitive approach to improve the adaption of Network Operators' operational processes to the new digital age. We propose a dynamic strategy considering the Case-Base Reasoning (CBR) technique for helping to reduce overall costs by optimizing operation margins. In this way, highly competitive exploitation methods to support new services can be deployed. The proposed dynamic algorithms can achieve higher transmitted power efficiency, up to 20% versus previously proposed static solutions, prolonging the transceivers' lifetime and thus addressing telco operator costs reduction., This work has been supported by the Spanish Government through project ALLIANCE (TEC2017-90034-C2-2-R) with FEDER contribution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Real-time 10Gbps polarization independent quasicoherent receiver for NG-PON2 access networks

  • Altabas, Jose Antonio
  • Silva Valdecasa, Guillermo
  • Suhr, Lau F.
  • Lázaro Villa, José Antonio|||0000-0002-5592-8434
  • Garces, Ignacio
  • Tafur Monroy, Idelfonso
  • Jensen, J.B.
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, In this paper, we propose and test experimentally a real-time 10 Gbps polarization independent quasicoherent receiver for NG-PON2 access networks. The proposed 10 Gbps quasicoherent receiver exhibits a sensitivity of -35.2 dBm after 40 km SSMF transmission with a commercial generic EML as transmitter. This sensitivity means a 14.9 dB improvement over a direct detection scheme with a photodiode after 40 km SSMF transmission. Therefore, the use of the proposed 10 Gbps quasicoherent receiver with the tested EML will provide a power budget of 34.76 dB (class E1) and a splitting ratio of 128 after the 40 km SSMF transmission. Finally, the proposed 10 Gbps quasicoherent receiver allows a colorless and optical filterless operation because wavelength selection is done by tuning the local oscillator wavelength and using electrical intermediate frequency filtering., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Enabling multi-segment 5G service provisioning and maintenance through network slicing

  • Montero Herrera, Rafael
  • Agraz Bujan, Fernando|||0000-0001-8958-0088
  • Pagès Cruz, Albert|||0000-0002-6661-3630
  • Spadaro, Salvatore|||0000-0002-4100-1726
This is a post-peer-review, pre-copyedit version of an article published in Journal of Network and Systems Management . The final authenticated version is available online at: http://dx.doi.org/10.1007/s10922-019-09509-9, The current deployment of 5G networks in a way to support the highly demanding service types defined for 5G, has brought the need for using new techniques to accommodate legacy networks to such requirements. Network Slicing in turn, enables sharing the same underlying physical infrastructure among services with different requirements, thus providing a level of isolation between them to guarantee their proper functionality. In this work, we analyse from an architectural point of view, the required coordination for the provisioning of 5G services over multiple network segments/domains by means of network slicing, considering as well the use of sensors and actuators to maintain slices performance during its lifetime. We set up an experimental multi-segment testbed to demonstrate end-to-end service provisioning and its guarantee in terms of specific QoS parameters, such as latency, throughput and Virtual Network Function (VNF) CPU/RAM consumption. The results provided, demonstrate the workflow between different network components to coordinate the deployment of slices, besides providing a set of examples for slice maintenance through service monitoring and the use of policy-based actuations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Dual polarization full-field signal waveform reconstruction using intensity only measurements for coherent communications

  • Chen, Haoshuo
  • Fontaine, Nicolas K.
  • Gené Bernaus, Joan M.|||0000-0002-1082-9408
  • Ryf, Roland
  • Neilson, David T.
  • Raybon, Gregory
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Conventional optical coherent receivers capture the full electrical field, including amplitude and phase, of a signal waveform by measuring its interference against a stable continuous-wave local oscillator (LO). In optical coherent communications, powerful digital signal processing (DSP) techniques operating on the full electrical field can effectively undo transmission impairments such as chromatic dispersion (CD) and polarization mode dispersion (PMD). Simpler direct detection techniques do not have access to the full electrical field and therefore lack the ability to compensate for these impairments. We present a full-field measurement technique using only direct detection that does not require any beating with a strong carrier LO. Rather, phase retrieval algorithms based on alternating projections that makes use of dispersive elements are discussed, allowing to recover the optical phase from intensity-only measurements. In this demonstration, the phase retrieval algorithm is a modified Gerchberg-Saxton (GS) algorithm that achieves a simulated optical signal-to-noise ratio (OSNR) penalty of less than 4 dB compared to theory at a bit-error rate of 2 ×10 -2 . Based on the proposed phase retrieval scheme, we experimentally demonstrate signal detection and subsequent standard 2 × 2 multiple-input-multiple-output (MIMO) equalization of a polarization-multiplexed 30-Gbaud QPSK transmitted over a 520-km standard single-mode fiber (SMF) span., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Medium access control in wireless network-on-chip: a context analysis

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Mestres Sugrañes, Albert|||0000-0001-5332-8606
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Wireless on-chip communication is a promising candidate to address the performance and efficiency issues that arise when scaling current NoC techniques to manycore processors. A WNoC can serve global and broadcast traffic with ultra-low latency even in thousand-core chips, thus acting as a natural complement to conventional and throughput-oriented wireline NoCs. However, the development of MAC strategies needed to efficiently share the wireless medium among the increasing number of cores remains a considerable challenge given the singularities of the environment and the novelty of the research area. In this position article, we present a context analysis describing the physical constraints, performance objectives, and traffic characteristics of the on-chip communication paradigm. We summarize the main differences with respect to traditional wireless scenarios, and then discuss their implications on the design of MAC protocols for manycore WNoC, with the ultimate goal of kickstarting this arguably unexplored research area., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

5G Connected Vehicles Supported by Optical Fiber Access

  • Lazaro, J.A.
  • Coves, M.
  • Sarmiento, S.
  • Altabas, J.A.
  • Lerin, A.
Future autonomous vehicle will require a high level of computation, communication, sensing and fast response actuation. Communication among vehicles, and vehicles to infrastructure, accessing to remote systems and services will help to reduce other requirements in computation and sensing. This paper revise current state of the art of wireless technologies as: LTE, LTE-A Pro, IEEE802.11p and 5G, as well as optical fiber access technologies as: TDM, WDM, D-WDM and uD-WDM, for the different communications requirements in diverse scenarios as: Vehicle-to-Infrastructure (V2I), Vehicle-to-Vehicle (V2V), Vehicle-to-Pedestrian (V2P) and Vehicle-to-Network (V2N).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Real-time 10Gbps Polarization Independent Quasicoherent Receiver for NG-PON2 Access Networks

  • Altabas, J.A.
  • Silva Valdecasa, G.
  • Suhr, L.F.
  • Didriksen, M.
  • Lazaro, J.A.
  • Garces, I.
  • Monroy, T.
  • Clausen, A.T.
  • Jensen, J.
In this paper, we propose and test experimentally a real-time 10 Gbps polarization independent quasicoherent receiver for NG-PON2 access networks. The proposed 10 Gbps quasicoherent receiver exhibits a sensitivity of -35.2 dBm after 40 km SSMF transmission with a commercial generic EML as transmitter. This sensitivity means a 14.9 dB improvement over a direct detection scheme with a photodiode after 40 km SSMF transmission. Therefore, the use of the proposed 10 Gbps quasicoherent receiver with the tested EML will provide a power budget of 34.76 dB (class E1) and a splitting ratio of 128 after the 40 km SSMF transmission. Finally, the proposed 10 Gbps quasicoherent receiver allows a colorless and optical filterless operation because wavelength selection is done by tuning the local oscillator wavelength and using electrical intermediate frequency filtering. IEEE
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Flexible resource provisioning of polarization independent coherent PONs based on non-orthogonal multiple access and multiCAP modulation

  • Izquierdo, David
  • Altabas, Jose A.
  • Barrio, Miguel
  • Clemente, Jesus
  • Millan, Pablo
  • Sarmiento, Samael
  • Lazaro, Jose A.
  • Rommel, Simon
  • Puerta, Rafael
  • Vegas-Olmos, Juan J.
  • Tafur Monroy, Idelfonso
  • Garces, Ignacio
A combined non-orthogonal multiple access (NOMA) and multiband carrierless amplitude and phase modulation (multiCAP) scheme is proposed for flexible resource provisioning in coherent passive optical networks (PONs). While the proposed combination increases the data-rate and the number of users through the inclusion of NOMA and multiCAP, the coherent reception increases the range and splitting factor of the network through optical power budget enhancement. The proposed system is experimentally evaluated providing a 20 Gb/s aggregated data-rate per wavelength with 10G optoelectronics and applied in two main PON scenarios with four spectral configurations from full-band CAP to four-band multiCAP. The first PON scenario consists of an existing PON that the network operator requires to increase the number of users; NOMA with full-band CAP or multiCAP can be introduced replacing one or more users of the existing PON by one or several new sub-networks and multiplexing the sub-networks by NOMA. In the other PON scenario, several PONs can be nested sharing an initial splitter and achieving a larger number of users by the combination of NOMA and multiCAP. The proposed techniques are fully compatible with other multiplexing techniques such as dense wavelength division multiplexing, which should be considered to achieve higher numbers of users.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Enabling multi-segment 5G service provisioning and maintenance through network slicing

  • Montero Herrera, Rafael
  • Agraz Bujan, Fernando
  • Pagès Cruz, Albert
  • Spadaro, Salvatore
This is a post-peer-review, pre-copyedit version of an article published in Journal of Network and Systems Management . The final authenticated version is available online at: http://dx.doi.org/10.1007/s10922-019-09509-9, The current deployment of 5G networks in a way to support the highly demanding service types defined for 5G, has brought the need for using new techniques to accommodate legacy networks to such requirements. Network Slicing in turn, enables sharing the same underlying physical infrastructure among services with different requirements, thus providing a level of isolation between them to guarantee their proper functionality. In this work, we analyse from an architectural point of view, the required coordination for the provisioning of 5G services over multiple network segments/domains by means of network slicing, considering as well the use of sensors and actuators to maintain slices performance during its lifetime. We set up an experimental multi-segment testbed to demonstrate end-to-end service provisioning and its guarantee in terms of specific QoS parameters, such as latency, throughput and Virtual Network Function (VNF) CPU/RAM consumption. The results provided, demonstrate the workflow between different network components to coordinate the deployment of slices, besides providing a set of examples for slice maintenance through service monitoring and the use of policy-based actuations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Split-enabled 350–630 Gb/s optical interconnect with direct detection NOMA-CAP and 7-core multi-core fiber

  • Sarmiento Hernández, Samael
  • Delgado Mendinueta, José Manuel
  • Altabas, Jose Antonio
  • Spadaro, Salvatore
  • Shinada, Satoshi
  • Furukawa, Hideaki
  • Vegas Olmos, Juan José
  • Lázaro Villa, José Antonio
  • Wada, Naoya
The ever-growing data traffic volume inside data centers caused by the popularization of cloud services and edge computing demands scalable and cost-efficient network infrastructures. With this premise, optical interconnects have recently gained more and more research attention as a key building block to ensure end-to-end energy efficient solutions, offering high throughput, low latency and reduced energy consumption compared to current networks based on active optical cables. An efficient way for performing such optical interconnects is to make use of multi-core fibers (MCFs), which enables the multiplexing of several spatial channels, each using a different core inside the same fiber cladding. Moreover, non-orthogonal multiple access combined with multi-band carrierless amplitude and phase modulation (NOMA-CAP) has been recently proposed as a potential candidate to increase the network capacity and an efficiency/flexibility resource management. In this paper, using direct detection we experimentally demonstrate the transmission of NOMA-CAP signals through a 2 km MCF with 7 spatial channels for high capacity optical interconnect applications. The results show negligible transmission penalty for different total aggregated traffics ranging from 350 Gb/s to 630 Gb/s., This work was supported in part by ALLIANCE (TEC2017-90034-C2-2-R) project co-funded by FEDER, the European Union’s Horizon 2020 research and innovation programme under grant agreement no780997 (plaCMOS), as well as MINECO FPI-BES-2015-074302, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High capacity converged passive optical network and RoF-based 5G+ fronthaul using 4-PAM and NOMA-CAP signals

  • Sarmiento Hernández, Samael
  • Delgado Mendinueta, José Manuel
  • Altabas Navarro, Jose Antonio
  • Spadaro, Salvatore
  • Shinada, Satoshi
  • Furukawa, Hideaki
  • Vegas Olmos, Juan José
  • Lázaro Villa, José Antonio
  • Wada, Naoya
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Network architectural changes to satisfy all the 5G+ mobile network specifications and requirements are necessary due to the popularization of streaming and cloud applications on omnipresent portable devices. The combination of massive installation of micro-cell antenna sites with the cloud access radio network (C-RAN) architecture has recently been nominated as a promising technology for high-capacity mobile fronthaul links, albeit at a high cost. An alternative approach for next-generation fronthaul networks is to utilize the already deployed passive optical networks (PONs) where wireless and wired services may coexist in a converged manner. Non-orthogonal multiple access (NOMA) modulation with multi-band carrierless amplitude and phase modulation (NOMA-CAP) has recently been investigated as a promising 5G+ modulation format candidate to increase the capacity and flexibility of future mobile networks. Here, we experimentally demonstrate the convergence of a NOMA-CAP wireless waveform with a single-carrier wired signal in a PON scenario using radio-over-fiber (RoF) technology. Specifically, fifteen NOMA-CAP bands, with two NOMA power levels to double the capacity, transmit 15 Gb/s multiplexed with a digital 10 Gb/s four-level pulse amplitude modulation (PAM-4) signal for downlink application. Two converged system implementations have been considered, first using electrical frequency division multiplexing (EFDM) and secondly using the hybrid EFDM-wavelength division multiplexing (EFDM-WDM). Successful transmission through a 25 km span of standard single-mode fiber is achieved with negligible transmission penalty for both proposed converged solutions., This work was supported in part by ALLIANCE (TEC2017-90034-C2-2-R) project co-funded by FEDER, the European Union’s Horizon 2020 research and innovation programme under grant agreements no 761989 and 871900 (5G-PHOS and 5G-COMPLETE), as well as MINECO, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Dual polarization full-field signal waveform reconstruction using intensity only measurements for coherent communications

  • Chen, Haoshuo
  • Fontaine, Nicolas K.
  • Gené Bernaus, Joan M.
  • Ryf, Roland
  • Neilson, David T.
  • Raybon, Gregory
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Conventional optical coherent receivers capture the full electrical field, including amplitude and phase, of a signal waveform by measuring its interference against a stable continuous-wave local oscillator (LO). In optical coherent communications, powerful digital signal processing (DSP) techniques operating on the full electrical field can effectively undo transmission impairments such as chromatic dispersion (CD) and polarization mode dispersion (PMD). Simpler direct detection techniques do not have access to the full electrical field and therefore lack the ability to compensate for these impairments. We present a full-field measurement technique using only direct detection that does not require any beating with a strong carrier LO. Rather, phase retrieval algorithms based on alternating projections that makes use of dispersive elements are discussed, allowing to recover the optical phase from intensity-only measurements. In this demonstration, the phase retrieval algorithm is a modified Gerchberg-Saxton (GS) algorithm that achieves a simulated optical signal-to-noise ratio (OSNR) penalty of less than 4 dB compared to theory at a bit-error rate of 2 ×10 -2 . Based on the proposed phase retrieval scheme, we experimentally demonstrate signal detection and subsequent standard 2 × 2 multiple-input-multiple-output (MIMO) equalization of a polarization-multiplexed 30-Gbaud QPSK transmitted over a 520-km standard single-mode fiber (SMF) span., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Real-time 10Gbps polarization independent quasicoherent receiver for NG-PON2 access networks

  • Altabas, Jose Antonio
  • Silva Valdecasa, Guillermo
  • Suhr, Lau F.
  • Lázaro Villa, José Antonio
  • Garces, Ignacio
  • Tafur Monroy, Idelfonso
  • Jensen, J.B.
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, In this paper, we propose and test experimentally a real-time 10 Gbps polarization independent quasicoherent receiver for NG-PON2 access networks. The proposed 10 Gbps quasicoherent receiver exhibits a sensitivity of -35.2 dBm after 40 km SSMF transmission with a commercial generic EML as transmitter. This sensitivity means a 14.9 dB improvement over a direct detection scheme with a photodiode after 40 km SSMF transmission. Therefore, the use of the proposed 10 Gbps quasicoherent receiver with the tested EML will provide a power budget of 34.76 dB (class E1) and a splitting ratio of 128 after the 40 km SSMF transmission. Finally, the proposed 10 Gbps quasicoherent receiver allows a colorless and optical filterless operation because wavelength selection is done by tuning the local oscillator wavelength and using electrical intermediate frequency filtering., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Real-time maintenance of latency-sensitive 5G services through network slicing

  • Montero Herrera, Rafael
  • Agraz Bujan, Fernando
  • Pagès Cruz, Albert
  • Spadaro, Salvatore
This is a post-peer-review, pre-copyedit version of an article published in Photonic Network Communications. The final authenticated version is available online at: http://dx.doi.org/10.1007/s11107-020-00897-6., Network Slicing appears as one of the enabling technologies for 5G networks to accommodate services with different requirements and availability. The present work, seizes the use of network slicing and focuses on the deployment and maintenance of services which are sensitive to latency constraints. For this purpose, the design and use of a VNF Latency-sensor are presented, considering its aggregation to the internal chain of services and the retrieval of latency data from the sensor. In this way, and by making use of such data, the expected service performance can be guaranteed. A multi-level orchestration and control architecture is then introduced to provide all the required functionalities for this mechanism. In order to assess this method experimentally, an emulated multi-segment testbed, considering specific 5G network segments (i.e., Access, Metro and Core), is used. The experimental results demonstrate the correct latency sensing of a particular slice and the process of service maintenance through the triggering of proper network actuations such as path reconfiguration or slice reallocation, This work has been supported by the H2020 5GPPP SLICENET project (H2020-ICT-2016-2/761913) and the Spanish Government through project ALLIANCE-B (TEC2017-90034-C2-2-R) with FEDER contribution., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optimal design of cost-effective OXC and ROADM nodes to maximize the throughput of mesh-based u-DWDM metro-access networks

  • Sarmiento Hernández, Samael
  • Pagès Cruz, Albert
  • Spadaro, Salvatore
  • Lázaro Villa, José Antonio
Final published version of the article can be found at: https://dl.acm.org/doi/abs/10.1007/s11107-023-01000-5, Metro-access networks will play a primary role in future network fabrics, enabling connectivity among different actors such as 5G-based radio stations, edge datacenters, businesses, and home users. To provide such heterogeneous connectivity, changes to the current metro-access networks to provide them with greater scalability, higher levels of dynamic connectivity and flexibility, reduced end-to-end latency, and increased energy efficiency are required. In this context, mesh-based ultra-dense wavelength division multiplexing (u-DWDM) metro-access networks using reconfigurable optical switching nodes constitute a promising solution. However, the designs of traditional optical switching nodes are based on wavelength selective switches (WSSs), which provide high network reconfigurability only at a high cost, making them prohibitive for metro-access networks. Moving away from this design approach, a novel cost-effective and energy-efficient reconfigurable optical add-drop multiplexer (ROADM) node design built using a modular DWDM structure was recently proposed for ring-based u-DWDM metro-access networks, showing promising performance. This paper presents an optical node design for optical cross-connects (OXCs) utilizing a modular DWDM structure, with the objective of providing performance close to that of WSS-based OXCs but at a lower cost. With this target in mind, the optimal design of mesh-based u-DWDM metro-access networks was also studied using DWDM OXCs and ROADMs, with the aim of maximizing the network throughput while minimizing the hardware required to implement the switching nodes. To this end, both exact and heuristic mechanisms are presented to address the optimal network design. The results show a maximum network performance reduction of just 10% in the DWDM case compared to the WSS-based case with a switching node cost reduction in one order magnitude., FUNDING: This work was supported by the ALLIANCE (TEC2017-90034-C2-2-R) project co-funded by FEDER., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Results and achievements of the ALLIANCE Project: New network solutions for 5G and beyond

  • Careglio, Davide
  • Spadaro, Salvatore
  • Cabellos Aparicio, Alberto
  • Lázaro Villa, José Antonio
  • Barlet Ros, Pere
  • Gené Bernaus, Joan M.
  • Perelló Muntan, Jordi
  • Agraz Bujan, Fernando
  • Suárez-Varela Maciá, José Rafael
  • Pagès Raventós, Albert
  • Paillissé Vilanova, Jordi
  • Almasan Puscas, Felician Paul
  • Domingo Pascual, Jordi
  • Solé Pareta, Josep
Leaving the current 4th generation of mobile communications behind, 5G will represent a disruptive paradigm shift integrating 5G Radio Access Networks (RANs), ultra-high-capacity access/metro/core optical networks, and intra-datacentre (DC) network and computational resources into a single converged 5G network infrastructure. The present paper overviews the main achievements obtained in the ALLIANCE project. This project ambitiously aims at architecting a converged 5G-enabled network infrastructure satisfying those needs to effectively realise the envisioned upcoming Digital Society. In particular, we present two networking solutions for 5G and beyond 5G (B5G), such as Software Defined Networking/Network Function Virtualisation (SDN/NFV) on top of an ultra-high-capacity spatially and spectrally flexible all-optical network infrastructure, and the clean-slate Recursive Inter-Network Architecture (RINA) over packet networks, including access, metro, core and DC segments. The common umbrella of all these solutions is the Knowledge-Defined Networking (KDN)-based orchestration layer which, by implementing Artificial Intelligence (AI) techniques, enables an optimal end-to-end service provisioning. Finally, the cross-layer manager of the ALLIANCE architecture includes two novel elements, namely the monitoring element providing network and user data in real time to the KDN, and the blockchain-based trust element in charge of exchanging reliable and confident information with external domains., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness under contract FEDER TEC2017-90034-C2 (ALLIANCE project) and by the Generalitat de Catalunya under contract 2017SGR-1037 and 2017SGR-605., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optical power budget enhancement in 50-90 Gb/s IM-DD PONs with NOMA-CAP and SOA-Based amplification

  • Delgado Mendinueta, José Manuel
  • Altabas, Jose Antonio
  • Spadaro, Salvatore
  • Shinada, Satoshi
  • Furukawa, Hideaki
  • Vegas Olmos, Juan José
  • Lázaro Villa, José Antonio
  • Wada, Naoya
  • Sarmiento Hernández, Samael
We report experimental results of a semiconductor optical amplifier (SOA) for optical amplification in a 50-90 Gb/s IM-DD optical access system using non-orthogonal multiple access multiplexing combined with multi-band carrierless amplitude phase modulation format (NOMA-CAP). Specifically, the SOA has been investigated as both booster and pre-amplifier for downstream applications in PONs. The measured optical power budgets resulting from performing booster amplification and pre-amplification simultaneously, assuming a BER threshold at 2.2 × 10 -3 , are 28.7(23.7) dB and 23.6(18.9) dB at 50(90) Gb/s for the strong and weak NOMA levels, respectively, compared to the budgets for the strong and weak NOMA levels of 12.4(8.7) dB and 9.4(5.2) dB when no optical amplification is used., This work was supported in part by ALLIANCE (TEC2017-90034-C2-2-R) project co-funded by FEDER, the European Union’s Horizon 2020 research and innovation programme under grant agreement no 780997 (plaCMOS), as well as MINECO FPI-BES-2015-074302., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Applying cognitive dynamic learning strategies for margins reduction in operational optical networks

  • Notivol Calleja, Luis David
  • Spadaro, Salvatore
  • Perelló Muntan, Jordi
  • Junyent Giralt, Gabriel
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Today's optical transport networks are complex already and the support of the new arising services will further increase such complexity. Traditional deterministic network procedures will need to be revisited, especially their operations. Network Operators will require more dynamic approaches to get the best out of their infrastructure. In this context, cognition and machine learning techniques can provide innovative management solutions for traditional telecom operators. In this paper, we explore a dynamic cognitive approach to improve the adaption of Network Operators' operational processes to the new digital age. We propose a dynamic strategy considering the Case-Base Reasoning (CBR) technique for helping to reduce overall costs by optimizing operation margins. In this way, highly competitive exploitation methods to support new services can be deployed. The proposed dynamic algorithms can achieve higher transmitted power efficiency, up to 20% versus previously proposed static solutions, prolonging the transceivers' lifetime and thus addressing telco operator costs reduction., This work has been supported by the Spanish Government through project ALLIANCE (TEC2017-90034-C2-2-R) with FEDER contribution., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Route, modulation format, MIMO and spectrum assignment in Flex-Grid/MCF transparent optical core networks

  • Rumipamba Zambrano, Rubén Darío
  • Perelló Muntan, Jordi
  • Spadaro, Salvatore
In this paper, we target an optimal multiple-input multiple-output digital signal processing (MIMO-DSP) assignment to super-channels affected by intercore crosstalk (ICXT) in multicore fiber (MCF) enabled transparent optical core networks. MIMO-DSP undoes ICXT effects, but can be costly with high core density MCFs. Hence, its implementation in the network must be carefully decided. We address our objective as a joint route, modulation format, MIMO and spectrum assignment (RMMSA) problem, for which integer linear programming formulations are provided to optimally solve it in small network scenarios. Moreover, several heuristic approaches are also proposed to solve large-scale problem instances with good accuracy. Their goal is to minimize both network spectral requirements and the amount of MIMO equalized super-channels, taking a crosstalk-free space division multiplexing (SDM) solution as a reference, for example, based on parallel single mode fibers [i.e., a multifiber (MF) scenario]. For our evaluation, we consider several state-of-the-art MCF prototypes and different network topologies. The obtained results, with the considered MCFs, disclose that in national backbone networks, the desirable percentage of super-channels with MIMO equalization to match the performance of an equivalent crosstalk-free SDM solution ranges from 0% to 36, while in continental-wide networks this range raises from 0% to 56%. In addition, in the case of a nonideal MIMO (with a 3 dB/km of crosstalk compensation), such percentages range from 0% to 28% and from 0% to 45% in national and continental-wide backbone networks, respectively, experimenting a performance gap up to 12% with respect to the MF reference scenario., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Medium access control in wireless network-on-chip: a context analysis

  • Abadal Cavallé, Sergi
  • Mestres Sugrañes, Albert
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Wireless on-chip communication is a promising candidate to address the performance and efficiency issues that arise when scaling current NoC techniques to manycore processors. A WNoC can serve global and broadcast traffic with ultra-low latency even in thousand-core chips, thus acting as a natural complement to conventional and throughput-oriented wireline NoCs. However, the development of MAC strategies needed to efficiently share the wireless medium among the increasing number of cores remains a considerable challenge given the singularities of the environment and the novelty of the research area. In this position article, we present a context analysis describing the physical constraints, performance objectives, and traffic characteristics of the on-chip communication paradigm. We summarize the main differences with respect to traditional wireless scenarios, and then discuss their implications on the design of MAC protocols for manycore WNoC, with the ultimate goal of kickstarting this arguably unexplored research area., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Experimental assessment of 10 Gbps 5G multicarrier waveforms for high-layer split U-DWDM-PON-based fronthaul

  • Sarmiento Hernández, Samael
  • Altabas, Jose Antonio
  • Spadaro, Salvatore
  • Lázaro Villa, José Antonio
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The current constant growth in mobile networks' traffic demands caused by the popularization of cloud and streaming services on personal devices, requires architectural changes so as to fulfill all new 5G mobile network requirements. Cloud access radio network (C-RAN) architecture in combination with the massive deployment of small cell antenna sites have recently been proposed as a promising solution but will be demanding for high-capacity mobile fronthaul links. An efficient way for performing that connectivity is to make use of the dense wavelength multiplexing passive optical network (DWDM-PON) infrastructure. In this context, orthogonal frequency division multiplexing (OFDM) has been extensively explored as a potential candidate. Nevertheless, the main drawback of OFDM is its high out-of-band radiation. In order to overcome that drawback, new 5G multicarrier waveforms (FBMC, UFMC, and GFDM) have recently been proposed. In this paper, we experimentally assess and compare 10 Gbps 32-QAM-OFDM/FBMC/UFMC/GFDM system performance for high-layer split ultra-DWDM-PON-based fronthaul using a radio-over-fiber technique. The performance has been done in terms of spectral efficiency, peak-to-average power ratio, spectral density, and receiver sensitivity. In particular, intensity-modulation with direct-detection and quasi-coherent-detection have been considered. In order to improve the multicarrier system energy efficiency, the effect of using a hard clipping technique over transmitted signals is also studied. Finally, we evaluated the crosstalk interference between two adjacent channels of the same modulation scheme, as a function of their electrical frequency span for downlink application., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Orchestrating virtual slices in data centre infrastructures with optical DCN

  • Pagès Cruz, Albert
  • Agraz Bujan, Fernando
  • Montero Herrera, Rafael
  • Landi, Giada
  • Capitani, Marco
  • Gallico, Domenico
  • Biancani, Matteo
  • Nejabati, Reza
  • Simeonidou, Dimitra
  • Spadaro, Salvatore
The emergence of new paradigms and services is pushing the limits of nowadays cloud infrastructures. It is a fact that current solutions lack in the flexibility and configurability to adapt to heterogeneous requirements coming from the applications/services to be supported over them. This results most of the time in severe underutilization of the underlying physical substrate. In light of this, newer approaches on resource provisioning and infrastructure management are needed. The Infrastructure as a Service (IaaS) paradigm is proposed as a solution to overcome these limitations. Thanks to IaaS, the physical infrastructure is partitioned onto virtual slices, encompassing heterogeneous resources (e.g. network, computing). Such a concept is expected to be harnessed by future data center (DC) infrastructures in order to cope efficiently with multi-tenancy as well as heterogeneous application requirements. However, current DC networks (DCNs) impose sever limitations onto traffic handling to fully exploit this vision. In light of this, optical technologies are seen as prime candidates for realizing the high performance network fabrics that future DC architectures will need. Under such an umbrella, it becomes primordial to develop specific provisioning solutions that account for the particularities of the optical medium, while providing the means to efficiently slice the DC infrastructure. With all of these in mind, in this article we present a solution for orchestrating and controlling virtual slices in a DC scenario with optical intra-DCN, with the scope of optimizing the underlying physical infrastructure utilization. The benefits of the presented solution are demonstrated against legacy architectures through exhaustive experiments and simulations., Peer Reviewed, Postprint (author's final draft)