Skip to main content

DESARROLLO DE UN SISTEMA DE ENSAYOS HIL DE PANTOGRAFOS CON CATENARIAS VIRTUALES

TRA2017-84736-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A modal coordinate catenary model for the real-time simulations of the pantograph-catenary dynamic interaction

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The computational cost required to simulate the pantograph-catenary dynamic interaction can be a limiting factor in certain applications. Specifically, for Hardware-in-the-Loop (HIL) simulations, real-time capabilities of the software are imperative. In this paper, we propose to combine a modal coordinate approach with an offline/online strategy to build a very efficient simulation strategy. The proposed approach preserves the accuracy of the results, compared with those obtained by classical finite element strategies. We also define and validate a criterion for a priori truncation of the modal basis and analyse the effect of explicit treatment of the interaction force. The results show that the method presented could be used in pantograph HIL tests., The authors would like to acknowledge the funding provided by the Regional Government of Valencia (PROMETEO/2016/007) and the Spanish Ministry of Economy, Industry and Competitiveness (TRA2017-84736-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stochastic Monte Carlo simulations of the pantograph-catenary dynamic interaction to allow for uncertainties introduced during catenary installation

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The simulation of the pantograph-catenary dynamic interaction is at present mainly based on deterministic approaches. However, any errors made during the catenary stringing process are sources of variability that can affect the dynamic performance of the system. In this paper, we analyse the influence of dropper length, dropper spacing and support height errors on the current collection quality by applying a classic Monte Carlo method to obtain the probability density functions of several output quantities. The effects of installation errors are also studied for a range of train speeds. Finally, the pre-sag that, on average, produces the best behaviour of the system is identified, allowing for the uncertainty in the catenary installation. The results obtained show the convenience to consider variability in pantograph-catenary dynamic simulations., The authors would like to acknowledge the financial support received from the FPU program offered by the Spanish Ministry of Education, Culture and Sports (Ministerio de Educacion, Cultura y Deportes) [grant number FPU13/04191]. The funding provided by the Regional Government of Valencia (Generalitat Valenciana) [PROMETEO/2016/007] and the Spanish Ministry of Economy, Industry and Competitiveness (Ministerio de Economia, Industria y Competitividad) [TRA2017-84736-R] is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hardware-in-the-loop pantograph tests using analytical catenary models

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Pantograph hardware-in-the-loop (HIL) testing is an experimental method in which a physical pantograph is excited by an actuator which reproduces the movement of a virtual catenary. This paper proposes a new method that uses analytical catenary models for HIL tests. The approach is based on an iterative scheme until achieving a steady-state regime. Some of the method¿s advantages include its ability to consider the delay in the control and communication system and its applicability to a wide range of analytical catenary models. The proposed algorithm was validated both numerically and experimentally. The experimental results obtained in the HIL pantograph tests were compared with those obtained from pure numerical simulations using a linear pantograph model and showed good accuracy with pantograph running at different speeds., The authorswould like to acknowledge the financial support received from the SpanishMinistry of Economy, Industry and Competitiveness [TRA2017-84736-R].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analytical model of the pantograph¿catenary dynamic interaction and comparison with numerical simulations

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Catenaries are large cable structures which transmit electric current to trains through sliding contact with a pantograph. The finite element method is widely used to model this dynamic interaction problem and obtain the contact force between the pantograph and the catenary. As an alternative, analytical models can also be used to study catenary dynamics, although they require certain simplifications of the features considered in numerical models. In this paper, an analytical model composed of an infinite string and a visco-elastic support is introduced and enhanced by considering a Kelvin-Voigt damping model and the initial height of the contact wire. Considering the finite element (FE) model as a reference, the analytical model parameters are properly adjusted through static and wave propagation analyses to achieve similar behaviour in both the analytical and the FE models. To check the performance of the proposed model, the steady-state response of the pantograph¿catenary coupled system is calculated and compared with the results of the FE model. Finally, the analytical model is used to analyse the interference phenomenon produced during two-pantograph operation., The authors would like to acknowledge the financial support received from the Regional Government of Valencia [PROMETEO/2016/007] and the Spanish Ministry of Economy, Industry and Competitiveness [TRA2017-84736-R], also the funds received jointly from the Regional Government of Valencia and the European Social Fund [grant number APOSTD/2019/205].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the overlap section in a high-speed railway catenary by means of numerical simulations

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The transition between catenary tensioning sections is accomplished smoothly by overlapping a number of spans in each catenary section. This work presents an analysis of the overlap section in a high-speed railway catenary based on numerical simulations. The paper studies the influence on the system¿s dynamic behaviour of features such as double cantilevers and tensioning devices efficiency. Four and five-span overlaps are compared and the effect of train speed and overlap contact wire geometry are also analysed. Finally, an entire catenary section is optimised by Bayesian Optimisation techniques, leading to a catenary configuration with an interaction force with a standard deviation notably lower than that provided by the nominal catenary design., The authors would like to acknowledge the financial support received from the Regional Government of Valencia (PROMETEO/2016/007) and the Spanish Ministry of Economy, Industry and Competitiveness (TRA2017-84736-R). The funds received jointly from the Regional Government of Valencia and the European Social Fund under Grant APOSTD/2019/205 are also acknowledged. The authors wish to express their gratitude for the comments and useful information provided by Jose Antonio Martinez Lopez and the `Sociedad Espanola de Montajes Industriales' (SEMI Group).