Skip to main content

DESARROLLO DE UN SISTEMA DE ENSAYOS HIL DE PANTOGRAFOS CON CATENARIAS VIRTUALES

TRA2017-84736-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Dynamic response of periodic infinite structure to arbitrary moving load based on the Finite Element Method

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Tur, M.
[EN] A common problem in railway engineering is the dynamic of repetitive structures subject to moving loads. Bridges, rails or catenaries are the most representative periodic structures, over which the train acts as a moving exciter. Usually, these structures are long enough to consider that their dynamic response is in permanent regime. To assume the steady-state regime some features have to be considered: infinite length structure, perfect periodicity and constant velocity of the moving load. This paper adopts these assumptions and provides the steady-state solution of a generic periodic structure subject to an arbitrary and also periodic moving load. The structure is divided into repetitive blocks modelled by the Finite Element Method. By applying the periodicity condition it is possible to consider the entire structure dynamics with only one block. The problem is stated in the frequency domain and moved back to time domain by means of Discrete Fourier Transform., The authors would like to acknowledge the financial support received from the Spanish Ministry of Economy, Industry and Competitiveness (TRA2017-84736-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A modal coordinate catenary model for the real-time simulations of the pantograph-catenary dynamic interaction

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The computational cost required to simulate the pantograph-catenary dynamic interaction can be a limiting factor in certain applications. Specifically, for Hardware-in-the-Loop (HIL) simulations, real-time capabilities of the software are imperative. In this paper, we propose to combine a modal coordinate approach with an offline/online strategy to build a very efficient simulation strategy. The proposed approach preserves the accuracy of the results, compared with those obtained by classical finite element strategies. We also define and validate a criterion for a priori truncation of the modal basis and analyse the effect of explicit treatment of the interaction force. The results show that the method presented could be used in pantograph HIL tests., The authors would like to acknowledge the funding provided by the Regional Government of Valencia (PROMETEO/2016/007) and the Spanish Ministry of Economy, Industry and Competitiveness (TRA2017-84736-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stochastic Monte Carlo simulations of the pantograph-catenary dynamic interaction to allow for uncertainties introduced during catenary installation

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The simulation of the pantograph-catenary dynamic interaction is at present mainly based on deterministic approaches. However, any errors made during the catenary stringing process are sources of variability that can affect the dynamic performance of the system. In this paper, we analyse the influence of dropper length, dropper spacing and support height errors on the current collection quality by applying a classic Monte Carlo method to obtain the probability density functions of several output quantities. The effects of installation errors are also studied for a range of train speeds. Finally, the pre-sag that, on average, produces the best behaviour of the system is identified, allowing for the uncertainty in the catenary installation. The results obtained show the convenience to consider variability in pantograph-catenary dynamic simulations., The authors would like to acknowledge the financial support received from the FPU program offered by the Spanish Ministry of Education, Culture and Sports (Ministerio de Educacion, Cultura y Deportes) [grant number FPU13/04191]. The funding provided by the Regional Government of Valencia (Generalitat Valenciana) [PROMETEO/2016/007] and the Spanish Ministry of Economy, Industry and Competitiveness (Ministerio de Economia, Industria y Competitividad) [TRA2017-84736-R] is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hardware-in-the-loop pantograph tests using analytical catenary models

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Pantograph hardware-in-the-loop (HIL) testing is an experimental method in which a physical pantograph is excited by an actuator which reproduces the movement of a virtual catenary. This paper proposes a new method that uses analytical catenary models for HIL tests. The approach is based on an iterative scheme until achieving a steady-state regime. Some of the method¿s advantages include its ability to consider the delay in the control and communication system and its applicability to a wide range of analytical catenary models. The proposed algorithm was validated both numerically and experimentally. The experimental results obtained in the HIL pantograph tests were compared with those obtained from pure numerical simulations using a linear pantograph model and showed good accuracy with pantograph running at different speeds., The authorswould like to acknowledge the financial support received from the SpanishMinistry of Economy, Industry and Competitiveness [TRA2017-84736-R].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analytical model of the pantograph¿catenary dynamic interaction and comparison with numerical simulations

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Catenaries are large cable structures which transmit electric current to trains through sliding contact with a pantograph. The finite element method is widely used to model this dynamic interaction problem and obtain the contact force between the pantograph and the catenary. As an alternative, analytical models can also be used to study catenary dynamics, although they require certain simplifications of the features considered in numerical models. In this paper, an analytical model composed of an infinite string and a visco-elastic support is introduced and enhanced by considering a Kelvin-Voigt damping model and the initial height of the contact wire. Considering the finite element (FE) model as a reference, the analytical model parameters are properly adjusted through static and wave propagation analyses to achieve similar behaviour in both the analytical and the FE models. To check the performance of the proposed model, the steady-state response of the pantograph¿catenary coupled system is calculated and compared with the results of the FE model. Finally, the analytical model is used to analyse the interference phenomenon produced during two-pantograph operation., The authors would like to acknowledge the financial support received from the Regional Government of Valencia [PROMETEO/2016/007] and the Spanish Ministry of Economy, Industry and Competitiveness [TRA2017-84736-R], also the funds received jointly from the Regional Government of Valencia and the European Social Fund [grant number APOSTD/2019/205].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Pantograph-Catenary Dynamic Models and their Implementation in Hardware-in-the-Loop Tests

  • Gil-Romero, Jaime|||0000-0001-5597-5938
[ES] Existe una extensa red de líneas ferroviarias electrificadas en todo el mundo. La mayoría de ellas utilizan líneas aéreas de contacto o catenarias para suministrar electricidad a los trenes. Las catenarias son estructuras de cables ubicadas sobre las vías ferroviarias, diseñadas para ser contactadas por los pantógrafos que se encuentran sobre la parte superior de los trenes. El correcto funcionamiento del sistema requiere un alto nivel de exigencia, especialmente a alta velocidad, cuando la continuidad del contacto se ve comprometida. La herramienta más empleada el sistema pantógrafo-catenaria es el uso de simulaciones numéricas. En particular, el Método de los Elementos Finitos (MEF) es la técnica más extendida para modelar y simular la interacción dinámica del pantógrafo con la catenaria. Después de la etapa de simulación, el pantógrafo y la catenaria tienen que ser testados mediante ensayos experimentales en vía. Sin embargo, existe una alternativa que puede reemplazar esos ensayos con una reducción significativa de costes. Dicha alternativa, llamada Hardware In the Loop (HIL), permite testar pantógrafos en el laboratorio mediante un banco de ensayos que emula la interacción con una catenaria virtual. Diferentes grupos de investigación han implementado HIL; sin embargo, en todos los intentos se han adoptado soluciones de compromiso, lo que demuestra el reto que supone la aplicación de HIL. Esta Tesis pretende avanzar en el campo de ensayos HIL, impulsando las capacidades de la técnica y solventando algunas de las limitaciones encontradas en la literatura. Para ello se proponen dos tipos diferentes de modelos de catenaria para su uso en ensayos HIL. El primero es un modelo analítico basado en un cable tensado con perfil geométrico periódico que proporciona la solución estacionaria del sistema. Este enfoque reduce la complejidad de la catenaria, pero mantiene las principales características que intervienen en la dinámica. El modelo ha demostrado ser útil para explicar el comportamiento fundamental de la catenaria, ayudando a comprender el fenómeno de interferencia entre dos pantógrafos. Este modelo analítico es adecuado para HIL debido a su bajo coste computacional. En el presente trabajo se propone un algoritmo iterativo para utilizar el modelo analítico en HIL. El hecho de que el modelo sea periódico permite la aplicación de una estrategia específica para compensar el retraso del lazo de control. Esta estrategia tiene un excelente rendimiento y precisión, validados al comparar ensayos HIL con simulaciones. La validación se realiza con un peso en el lugar del pantógrafo para eliminar las potenciales diferencias en el modelo. Si bien la precisión alcanzada es buena, el modelo analítico de catenaria carece de fidelidad, lo que ha motivado el desarrollo del siguiente modelo. El segundo modelo de catenaria para ensayos HIL es el Modelo Periódico de Elementos Finitos (MPEF), discretizado con el MEF para evitar adicionales simplificaciones topológicas y estructurales. En la formulación se incluye la condición de periodicidad y la dinámica se resuelve mediante análisis en frecuencia. Además, las no linealidades de la catenaria se consideran en la formulación. Un algoritmo iterativo, similar al utilizado para los ensayos HIL con catenaria analítica, es usado para realizar ensayos HIL con catenarias MPEF. La estrategia anterior de utilización de un peso se emplea para validar el sistema de ensayos, resultando tener una gran precisión. Los resultados son gratificantes debido a la sofisticación del modelo de catenaria, la precisión de los ensayos y la cancelación del retraso. Los ensayos realizados simulan la respuesta de catenarias realistas con la hipótesis simplificativa de periodicidad. Son adecuados para la dinámica de catenarias de vanos iguales en la zona central de cada cantón, sin embargo es necesario seguir realizando esfuerzos para eliminar la condición de periodicidad sin comprometer la precisión de los resultados., [CA] Existeix una extensa xarxa de línies ferroviàries electrificades a tot el món. La majoria d'elles utilitzen Línies Aèries de Contacte o catenàries per a subministrar electricitat als trens. Les catenàries són estructures de cables situades sobre les vies ferroviàries, dissenyades per a ser contactades pels pantògrafs que es troben sobre la part superior de la locomotora. El correcte funcionament del sistema requereix un alt nivell d'exigència, especialment a alta velocitat, quan la continuïtat del contacte es veu compromesa. L'eina majoritària per el sistema pantògraf-catenària és l'ús de simulacions numèriques. En particular, el Mètode dels Elements Finits (MEF) és la tècnica més usada per a modelar i simular la interacció dinàmica del pantògraf amb la catenària. Aquest mètode permet modelar catenàries. Després de l'etapa de simulació, el pantògraf i les catenàries han de ser testats en assajos experimentals en via. No obstant això, existeix una alternativa que pot reemplaçar eixos assajos amb una reducció significativa de costos. Aquesta alternativa, anomenada Hardware in the Loop (HIL), permet testar pantògrafs en el laboratori amb un banc d'assajos que emula la interacció amb una catenària virtual. Diferents grups d'investigació han implementat HIL; no obstant això, en tots els intents s'han adoptat solucions de compromís, la qual cosa demostra el repte que suposa l'aplicació de HIL. Aquesta Tesi pretén avançar en el camp dels assajos HIL, impulsant les capacitats de la tècnica i solucionant algunes de les limitacions trobades en la literatura. Aquesta Tesi proposa dos tipus diferents de models de catenària per al seu ús en assajos HIL. El primer és un model analític basat en un cable tens amb perfil geomètric periòdic que proporciona la solució estacionària del sistema. Aquest model redueix la complexitat de la catenària, però manté les principals característiques que intervenen en la dinàmica. El model ha demostrat ser útil per a explicar la dinàmica fonamental de la catenària, ajudant a comprendre el fenomen d'interferència entre dos pantògrafs. Aquest model analític és adequat per a realitzar assajos HIL a causa del seu baix cost computacional. Aquest treball proposa un algoritme iteratiu per a utilitzar el model analític en assajos HIL de pantògrafs. El fet que el model siga periòdic permet l'aplicació d'una estratègia específica per a compensar el retard del llaç de control. Aquesta estratègia té un excel·lent rendiment i precisió, validats en comparar assajos HIL amb simulacions numèriques. La validació es realitza amb una massa en el lloc del pantògraf per a eliminar les potencials diferències en el model. Si bé la precisió aconseguida és bona, el model analític de catenària manca de fidelitat, la qual cosa ha motivat el desenvolupament d'un model periòdic més avançat. El segon model de catenària per a assajos HIL és el Model Periòdic d'Elements Finits MPEF, discretitzat amb el MEF per a evitar simplificacions topològiques i estructurals addicionals. El model inclou la condició de periodicitat i la dinàmica es resol mitjançant anàlisi en freqüència. A més, les no linealitats de la catenària es consideren en la formulació. Un algoritme iteratiu, similar a l'utilitzat per als assajos HIL amb catenària analítica, és usat per a realitzar assajos HIL amb catenàries MPEF. L'estratègia anterior d'utilització d'una massa s'empra per a validar el sistema d'assajos, resultant tindre una gran precisió. Els resultats són gratificants a causa de la sofisticació del model de catenària, la precisió dels assajos i la cancel·lació del retard. Els assajos realitzats simulen la resposta de catenàries realistes amb la hipòtesi simplificativa de periodicitat. Són adequats per a la dinàmica de catenàries de vans iguals en la zona central dels seccionaments, no obstant això és necessari continuar fent esforços per a eliminar la condició de periodicitat sense comprometre la precisió dels res, [EN] There is an extensive network of electrified railway lines over the world. Most of them use overhead contact lines or catenaries to provide the trains with electrical power. Catenaries consist of electrified wires placed over the rail track, designed to contact the pantograph placed on the roof of the train. The proper operation of the system is very demanding, especially at high speed, when the continuity of the contact is compromised. The most predominant tool for studying and designing the pantograph-catenary system is the use of numerical simulations. Notably, the Finite Element Method (FEM) is the most popular technique for modelling and simulating the dynamic interaction of the pantograph and the catenary. This method allows modelling catenaries with outstanding fidelity and without any loss of generality. After the simulation stage, the pantograph and the catenaries have to be assessed by in-line experimental tests. However, there is an alternative that can replace those tests with a significant reduction in costs. The alternative method, called Hardware In the Loop (HIL), allows testing pantographs in the laboratory with a test rig that emulates the interaction with a virtual catenary. Different research groups have implemented HIL; however, in every attempt, a compromise solution has been adopted, demonstrating the challenging nature of HIL. This Thesis aims to advance in the field of HIL tests, pushing forward the capabilities of the technique and solving some of the limitations found in the literature. This Thesis proposes two different kinds of catenary models for their use in HIL tests. The first is an analytical model based on a string of periodic geometric profile that accounts for the steady state. It reduces the complexity of the catenary but keeps the main features involved in the dynamic. The model has proven useful in explaining the fundamental dynamics of the catenary, helping understand the interference between two pantographs. This analytical model is suitable for HIL because of its low computational cost. An iterative algorithm is proposed to use the analytical model in HIL. The fact that the model is periodic permits a specific strategy to compensate the control loop delay. This strategy has excellent performance and accuracy, validated by comparing HIL tests with numerical simulations and getting an agreement. This agreement will not be possible if the pantograph model of the simulations is inaccurate. Therefore, the validation is carried out with a weight or mass model in place of the pantograph to eliminate potential differences. Even though the precision achieved is good, the analytical catenary model lacks fidelity, which has motivated the development of a more advanced periodic model. The second catenary model for HIL tests is the Periodic Finite Element Model (PFEM), discretised with FEM to avoid further topological and structural simplifications. The model includes the periodicity condition, and the dynamics are solved by frequency analysis. Furthermore, the catenary non-linearities are considered in the formulation. An iterative algorithm, similar to the one used for the HIL tests with the analytical catenary, is used to realise HIL tests with PFEM catenaries. The previous strategy with a mass model is used to validate the test, confirming great precision. The results are gratifying due to the sophistication of the model, the accuracy of the tests and the cancellation of the delay. The tests simulate the response of realistic catenaries with the simplifying periodicity hypothesis. They are adequate for the dynamic of equal-span catenary at the central zone of every section, but future efforts have to be made to get rid of the periodicity condition while keeping the accuracy of the results., The authors would like to acknowledge the financial support received from the State Research Agency of the Spanish Science and Innovation Ministry (PID2020- 113458RB-I00) and from the Valencian Regional Government (PROMETEO/2021/046) (PROMETEO/2016/007) and the Spanish Ministry of Economy, Industry and Competitiveness (TRA2017-84736-R), also the funds received jointly from the Regional Government of Valencia and the Euro- pean Social Fund, under Grant APOSTD/2019/205
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the overlap section in a high-speed railway catenary by means of numerical simulations

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The transition between catenary tensioning sections is accomplished smoothly by overlapping a number of spans in each catenary section. This work presents an analysis of the overlap section in a high-speed railway catenary based on numerical simulations. The paper studies the influence on the system¿s dynamic behaviour of features such as double cantilevers and tensioning devices efficiency. Four and five-span overlaps are compared and the effect of train speed and overlap contact wire geometry are also analysed. Finally, an entire catenary section is optimised by Bayesian Optimisation techniques, leading to a catenary configuration with an interaction force with a standard deviation notably lower than that provided by the nominal catenary design., The authors would like to acknowledge the financial support received from the Regional Government of Valencia (PROMETEO/2016/007) and the Spanish Ministry of Economy, Industry and Competitiveness (TRA2017-84736-R). The funds received jointly from the Regional Government of Valencia and the European Social Fund under Grant APOSTD/2019/205 are also acknowledged. The authors wish to express their gratitude for the comments and useful information provided by Jose Antonio Martinez Lopez and the `Sociedad Espanola de Montajes Industriales' (SEMI Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Simulation of the contact wire wear evolution in high speed overhead contact lines

  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Tur, Manuel
[EN] The overhead contact line or catenary is the structure composed of support elements and wires responsible for the power supply of the locomotive through sliding contact with the pantograph. This contact causes wear not only on the pantograph contact strips but also in the contact wire, which produces a reduction on its effective section and eventually its replacement, resulting in the stoppage of the rolling stock with its associate economical and operational drawbacks. For this reason, it is important for catenary designers to count with appropriate tools able to predict the contact wire wear behaviour for extending the service life of the system. This work proposes a strategy to simulate the long-term contact wire wear evolution considering the mutual influence between the dynamic behaviour and wear of the system. The method is based on two pillars: the efficient simulation of the catenary-pantograph dynamic interaction and a heuristic wear model which considers mechanical wear due to friction and electrical wear produced by Joule effect and electric arcs. With the proposed simulation tool, we analyse the effect on the long-term contact wire worn height of the train speed., The authors would like to acknowledge the financial support received from the Spanish Ministry of Economy, Industry and Competitiveness (TRA2017-84736-R).