Skip to main content

ENSAYOS HIL DE PANTOGRAFOS CON MODELOS AVANZADOS DE CATENARIAS VIRTUALES

PID2020-113458RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Railway catenary optimisation with span variability by an iterative optimisation algorithm for large numbers of parameters

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Song, Y.
  • Rønnquist, A.
[EN] Optimising the catenary topology to improve the pantograph-catenary interaction is computationally expensive. Especially in the case of large numbers of parameters. Unfortunately, varying span lengths and dropper distribution in realistic systems requires the inclusion of a vast number of parameters, making the optimisation problem extremely complicated. Published optimisation works assume that the catenary is a perfectly periodical structure to reduce the number of parameters involved in the optimisation and keep the computational cost below a feasible limit. This paper attempts to deal with the scientific challenge of optimising a realistic system by proposing an iterative optimisation strategy consisting of optimising groups of parameters separately and repeating the optimisations iteratively to consider the dependence between parameters that otherwise would need to be optimised together. This solution performs topological catenary optimisation in catenary zones with span variability or transition zones in which optimisations that assume periodicity are no longer valid., The authors would like to acknowledge the financial support received from the State Research Agency of the Spanish Science and Innovation Ministry, Spain (PID2020-113458RB-I00) and from the Valencian Regional Government, Spain (PROMETEO/2021/046).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hardware-in-the-Loop Test Bench for Simulation of Catenary¿Pantograph Interaction (CPI) with Linear Camera Measurement

  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Ricolfe Viala, Carlos|||0000-0002-2980-4569
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Salvador-Muñoz, Mario|||0000-0002-6087-6528
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Pedrosa, Ana M.|||0000-0001-8069-5620
[EN] Catenary-pantograph contact force is generally used for assessment of the current collection quality. A good current collection quality not only increases catenary lifetime but also keeps a stable electric supply and helps to avoid accidents. Low contact forces lead to electric arcs that degrade the catenary, and high contact forces generate excessive wear on the sliding surfaces. Railway track operators require track tests to ensure that catenary-pantograph force remains between safe values. However, a direct measure of the contact force requires an instrumented pantograph which is generally costly and complicated. This paper presents a test bench that allows testing virtual catenaries over real pantographs. Therefore, the contact point force behavior can be tested before the track test to guarantee that the test is passed. Moreover, due to its flexibility, the system can be used for model identification and validation, catenary testing, or contact loss simulation. The test bench also explores using computer vision as an additional sensor for each application. Results show that the system has high precision and flexibility in the available tests., This research was funded by grants PID2020-113458RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and PROMETEO/2021/046 by GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hardware-in-the-loop simulations of a railway pantograph with a finite element periodic catenary model

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The pantograph-catenary dynamic interaction problem is addressed by Hardware-in-the-Loop (HIL) tests to simulate the dynamic interaction between a numerical model (the catenary) and a physical device (the pantograph). The real-time simulation requires a computationally efficient numerical model and an on time and accurate transference of the response to the pantograph, for which a Periodic Finite Element Model (PFEM) of the catenary is considered. Firstly because of the acceptable computation time required to solve it, makes it suitable for real-time simulations and, secondly, its ability to allow for the delay caused by the transfer of the numerical model response. The catenary PFEM we used considers the non-linear behaviour of the dropper slackening, leading to highly accurate HIL test results, which were validated up to a frequency of 25 Hz., The authors would like to acknowledge the financial support received from the Generalitat Valenciana (PROMETEO/2021/046) and (PID2020-113458RB-I00) funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cantilever modelling in the railway catenary shape-finding problem

  • Aldaz-Saca, Nelson Hernán
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Catenary designers need accurate numerical simulation tools to improve the system performance, increase operational speed, minimize wear and prevent arcing. To obtain reliable results, the catenary numerical model must avoid over-simplifying the hypotheses, which significantly affect the outcome, even if this involves increasing the model¿s complexity and computational cost. While the cantilevers that support the catenary wires are frequently omitted or over-simplified in many published studies, we incorporate the cantilevers into the catenary model to examine their impact on the static and dynamic behaviour of the catenary, and to develop a shape-finding procedure to include the cantilevers by a substructuring approach. For this we compared three scenarios: (i) a conventional catenary model without cantilevers, plus two other more realistic models that include the cantilevers: (ii) considering cantilever deformation in the geometric design, and (iii) disregarding cantilever deformation in the geometric design. The findings suggest that including the cantilevers reduces the stiffness of the system and produces a similar contact force. Although the two cantilever design options analysed result in slightly different initial catenary configurations, they also yield a very similar contact force. These findings therefore validate using simplified supports, provided they are appropriately calibrated, for which the proposed comprehensive cantilever model can be applied., The authors wish to thank the financial support received from Generalitat Valenciana (PROMETEO/2021/046) , and the project (PID2020-113458RB-I00) funded by MICIU/AEI/10.13039/501100011033. The useful information provided by Jose Antonio Fernandez Lopez is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Pantograph-Catenary Dynamic Models and their Implementation in Hardware-in-the-Loop Tests

  • Gil-Romero, Jaime|||0000-0001-5597-5938
[ES] Existe una extensa red de líneas ferroviarias electrificadas en todo el mundo. La mayoría de ellas utilizan líneas aéreas de contacto o catenarias para suministrar electricidad a los trenes. Las catenarias son estructuras de cables ubicadas sobre las vías ferroviarias, diseñadas para ser contactadas por los pantógrafos que se encuentran sobre la parte superior de los trenes. El correcto funcionamiento del sistema requiere un alto nivel de exigencia, especialmente a alta velocidad, cuando la continuidad del contacto se ve comprometida. La herramienta más empleada el sistema pantógrafo-catenaria es el uso de simulaciones numéricas. En particular, el Método de los Elementos Finitos (MEF) es la técnica más extendida para modelar y simular la interacción dinámica del pantógrafo con la catenaria. Después de la etapa de simulación, el pantógrafo y la catenaria tienen que ser testados mediante ensayos experimentales en vía. Sin embargo, existe una alternativa que puede reemplazar esos ensayos con una reducción significativa de costes. Dicha alternativa, llamada Hardware In the Loop (HIL), permite testar pantógrafos en el laboratorio mediante un banco de ensayos que emula la interacción con una catenaria virtual. Diferentes grupos de investigación han implementado HIL; sin embargo, en todos los intentos se han adoptado soluciones de compromiso, lo que demuestra el reto que supone la aplicación de HIL. Esta Tesis pretende avanzar en el campo de ensayos HIL, impulsando las capacidades de la técnica y solventando algunas de las limitaciones encontradas en la literatura. Para ello se proponen dos tipos diferentes de modelos de catenaria para su uso en ensayos HIL. El primero es un modelo analítico basado en un cable tensado con perfil geométrico periódico que proporciona la solución estacionaria del sistema. Este enfoque reduce la complejidad de la catenaria, pero mantiene las principales características que intervienen en la dinámica. El modelo ha demostrado ser útil para explicar el comportamiento fundamental de la catenaria, ayudando a comprender el fenómeno de interferencia entre dos pantógrafos. Este modelo analítico es adecuado para HIL debido a su bajo coste computacional. En el presente trabajo se propone un algoritmo iterativo para utilizar el modelo analítico en HIL. El hecho de que el modelo sea periódico permite la aplicación de una estrategia específica para compensar el retraso del lazo de control. Esta estrategia tiene un excelente rendimiento y precisión, validados al comparar ensayos HIL con simulaciones. La validación se realiza con un peso en el lugar del pantógrafo para eliminar las potenciales diferencias en el modelo. Si bien la precisión alcanzada es buena, el modelo analítico de catenaria carece de fidelidad, lo que ha motivado el desarrollo del siguiente modelo. El segundo modelo de catenaria para ensayos HIL es el Modelo Periódico de Elementos Finitos (MPEF), discretizado con el MEF para evitar adicionales simplificaciones topológicas y estructurales. En la formulación se incluye la condición de periodicidad y la dinámica se resuelve mediante análisis en frecuencia. Además, las no linealidades de la catenaria se consideran en la formulación. Un algoritmo iterativo, similar al utilizado para los ensayos HIL con catenaria analítica, es usado para realizar ensayos HIL con catenarias MPEF. La estrategia anterior de utilización de un peso se emplea para validar el sistema de ensayos, resultando tener una gran precisión. Los resultados son gratificantes debido a la sofisticación del modelo de catenaria, la precisión de los ensayos y la cancelación del retraso. Los ensayos realizados simulan la respuesta de catenarias realistas con la hipótesis simplificativa de periodicidad. Son adecuados para la dinámica de catenarias de vanos iguales en la zona central de cada cantón, sin embargo es necesario seguir realizando esfuerzos para eliminar la condición de periodicidad sin comprometer la precisión de los resultados., [CA] Existeix una extensa xarxa de línies ferroviàries electrificades a tot el món. La majoria d'elles utilitzen Línies Aèries de Contacte o catenàries per a subministrar electricitat als trens. Les catenàries són estructures de cables situades sobre les vies ferroviàries, dissenyades per a ser contactades pels pantògrafs que es troben sobre la part superior de la locomotora. El correcte funcionament del sistema requereix un alt nivell d'exigència, especialment a alta velocitat, quan la continuïtat del contacte es veu compromesa. L'eina majoritària per el sistema pantògraf-catenària és l'ús de simulacions numèriques. En particular, el Mètode dels Elements Finits (MEF) és la tècnica més usada per a modelar i simular la interacció dinàmica del pantògraf amb la catenària. Aquest mètode permet modelar catenàries. Després de l'etapa de simulació, el pantògraf i les catenàries han de ser testats en assajos experimentals en via. No obstant això, existeix una alternativa que pot reemplaçar eixos assajos amb una reducció significativa de costos. Aquesta alternativa, anomenada Hardware in the Loop (HIL), permet testar pantògrafs en el laboratori amb un banc d'assajos que emula la interacció amb una catenària virtual. Diferents grups d'investigació han implementat HIL; no obstant això, en tots els intents s'han adoptat solucions de compromís, la qual cosa demostra el repte que suposa l'aplicació de HIL. Aquesta Tesi pretén avançar en el camp dels assajos HIL, impulsant les capacitats de la tècnica i solucionant algunes de les limitacions trobades en la literatura. Aquesta Tesi proposa dos tipus diferents de models de catenària per al seu ús en assajos HIL. El primer és un model analític basat en un cable tens amb perfil geomètric periòdic que proporciona la solució estacionària del sistema. Aquest model redueix la complexitat de la catenària, però manté les principals característiques que intervenen en la dinàmica. El model ha demostrat ser útil per a explicar la dinàmica fonamental de la catenària, ajudant a comprendre el fenomen d'interferència entre dos pantògrafs. Aquest model analític és adequat per a realitzar assajos HIL a causa del seu baix cost computacional. Aquest treball proposa un algoritme iteratiu per a utilitzar el model analític en assajos HIL de pantògrafs. El fet que el model siga periòdic permet l'aplicació d'una estratègia específica per a compensar el retard del llaç de control. Aquesta estratègia té un excel·lent rendiment i precisió, validats en comparar assajos HIL amb simulacions numèriques. La validació es realitza amb una massa en el lloc del pantògraf per a eliminar les potencials diferències en el model. Si bé la precisió aconseguida és bona, el model analític de catenària manca de fidelitat, la qual cosa ha motivat el desenvolupament d'un model periòdic més avançat. El segon model de catenària per a assajos HIL és el Model Periòdic d'Elements Finits MPEF, discretitzat amb el MEF per a evitar simplificacions topològiques i estructurals addicionals. El model inclou la condició de periodicitat i la dinàmica es resol mitjançant anàlisi en freqüència. A més, les no linealitats de la catenària es consideren en la formulació. Un algoritme iteratiu, similar a l'utilitzat per als assajos HIL amb catenària analítica, és usat per a realitzar assajos HIL amb catenàries MPEF. L'estratègia anterior d'utilització d'una massa s'empra per a validar el sistema d'assajos, resultant tindre una gran precisió. Els resultats són gratificants a causa de la sofisticació del model de catenària, la precisió dels assajos i la cancel·lació del retard. Els assajos realitzats simulen la resposta de catenàries realistes amb la hipòtesi simplificativa de periodicitat. Són adequats per a la dinàmica de catenàries de vans iguals en la zona central dels seccionaments, no obstant això és necessari continuar fent esforços per a eliminar la condició de periodicitat sense comprometre la precisió dels res, [EN] There is an extensive network of electrified railway lines over the world. Most of them use overhead contact lines or catenaries to provide the trains with electrical power. Catenaries consist of electrified wires placed over the rail track, designed to contact the pantograph placed on the roof of the train. The proper operation of the system is very demanding, especially at high speed, when the continuity of the contact is compromised. The most predominant tool for studying and designing the pantograph-catenary system is the use of numerical simulations. Notably, the Finite Element Method (FEM) is the most popular technique for modelling and simulating the dynamic interaction of the pantograph and the catenary. This method allows modelling catenaries with outstanding fidelity and without any loss of generality. After the simulation stage, the pantograph and the catenaries have to be assessed by in-line experimental tests. However, there is an alternative that can replace those tests with a significant reduction in costs. The alternative method, called Hardware In the Loop (HIL), allows testing pantographs in the laboratory with a test rig that emulates the interaction with a virtual catenary. Different research groups have implemented HIL; however, in every attempt, a compromise solution has been adopted, demonstrating the challenging nature of HIL. This Thesis aims to advance in the field of HIL tests, pushing forward the capabilities of the technique and solving some of the limitations found in the literature. This Thesis proposes two different kinds of catenary models for their use in HIL tests. The first is an analytical model based on a string of periodic geometric profile that accounts for the steady state. It reduces the complexity of the catenary but keeps the main features involved in the dynamic. The model has proven useful in explaining the fundamental dynamics of the catenary, helping understand the interference between two pantographs. This analytical model is suitable for HIL because of its low computational cost. An iterative algorithm is proposed to use the analytical model in HIL. The fact that the model is periodic permits a specific strategy to compensate the control loop delay. This strategy has excellent performance and accuracy, validated by comparing HIL tests with numerical simulations and getting an agreement. This agreement will not be possible if the pantograph model of the simulations is inaccurate. Therefore, the validation is carried out with a weight or mass model in place of the pantograph to eliminate potential differences. Even though the precision achieved is good, the analytical catenary model lacks fidelity, which has motivated the development of a more advanced periodic model. The second catenary model for HIL tests is the Periodic Finite Element Model (PFEM), discretised with FEM to avoid further topological and structural simplifications. The model includes the periodicity condition, and the dynamics are solved by frequency analysis. Furthermore, the catenary non-linearities are considered in the formulation. An iterative algorithm, similar to the one used for the HIL tests with the analytical catenary, is used to realise HIL tests with PFEM catenaries. The previous strategy with a mass model is used to validate the test, confirming great precision. The results are gratifying due to the sophistication of the model, the accuracy of the tests and the cancellation of the delay. The tests simulate the response of realistic catenaries with the simplifying periodicity hypothesis. They are adequate for the dynamic of equal-span catenary at the central zone of every section, but future efforts have to be made to get rid of the periodicity condition while keeping the accuracy of the results., The authors would like to acknowledge the financial support received from the State Research Agency of the Spanish Science and Innovation Ministry (PID2020- 113458RB-I00) and from the Valencian Regional Government (PROMETEO/2021/046) (PROMETEO/2016/007) and the Spanish Ministry of Economy, Industry and Competitiveness (TRA2017-84736-R), also the funds received jointly from the Regional Government of Valencia and the Euro- pean Social Fund, under Grant APOSTD/2019/205
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hardware-in-the-Loop pantograph tests with general overhead contact line geometry

  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Hardware-in-the-loop testing serves as a method to examine the dynamic interaction between the pantograph and catenary within controlled laboratory environments. This task involves measuring the force from the pantograph, using a real-time catenary model to determine the next pantograph position, and generating the desired pantograph movement to complete the loop. To address potential instability issues arising from communication delays and the inherent stiffness in the interaction with pantograph strips, a mass¿spring system and a Linear Quadratic Gaussian controller are integrated into the system. The catenary is a finite element model of a complete section, incorporating the non-linearity introduced by dropper slackening. Validation of the results demonstrates a good level of accuracy in the HiL test approach within the frequency range of 0¿20 Hz., The authors wish to express their gratitude for the financial support received from Grant PID2020-113458RB-I00 funded by MCIN/AEI/10.13039/501100011033 and Valencian Regional Government (PROMETEO/2021/046) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Finite element periodic catenary model to perform HIL pantograph tests considering non-linear dropper behaviour

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] In this paper, we propose a general approach to compute the dynamic response of periodic infinite structures subjected to a moving load. The method only considers one repetitive block of the structure which is modelled by the Finite Element Method. The problem is first shifted to the frequency domain where the periodicity condition is easily applied and then the temporal response is obtained. An infinite periodic catenary system has been chosen to illustrate the proposed formulation. The linear formulation is extended to include the non-linear behaviour of droppers. The efficiency and accuracy of the catenary model obtained makes it very suitable for use in Hardware in the Loop (HIL) pantograph tests. We propose to combine this catenary model with an iterative strategy to achieve the steady-state response of the coupled system and its performance is analysed in a virtual HIL simulation., The authors would like to acknowledge the financial support received from the State Research Agency of the Spanish Science and Innovation Ministry (PID2020-113458RB-I00) and from the Valencian Regional Government (PROMETEO/2021/046).