Skip to main content

EVALUACION EXPERIMENTAL DE VIGAS CONTINUAS PRETENSADAS, CON Y SIN REFUERZO, Y PIEZAS COMPUESTAS DE DOS HORMIGONES, PARA LA EXTENSION DE SU VIDA UTIL.

BIA2015-64672-C4-4-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Safety Assessment of Shear Strength Current Formulations for Composite Concrete Beams without Web Reinforcement

  • Rueda-García, Lisbel|||0000-0002-2061-1656
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Fernández Prada, Miguel Ángel|||0000-0001-5527-7793
[EN] Construction with precast concrete elements without web reinforcement and cast-in-place concrete on them to enhance the overall structure's integrity is a widespread practice in building construction. However as these composite elements' vertical shear strength has not been studied in-depth, a clear criterion about cast-in-place concrete's contribution to shear resistance is still a pending matter. The present study intends to reach practical conclusions about the shear strength assessment of composite concrete elements without web reinforcement. To do so, the shear strengths of 36 specimens, provided by existing shear formulations, were compared: 19 specimens tested by the authors, in which the existence of an interface between concretes, the cross-sectional shape and the concrete compressive strengths of the beam and slab were studied; and 17 specimens taken from a previous study about composite elements by Kim et al. (2016). The applied shear formulations were those of EC2-04, Draft 7 of EC2-20, fib MC-10, ACI 318-19 and the model proposed by Kim et al. (2016). Firstly, specimens' shear strength was calculated by considering that only the beam resisted shear. Secondly according to ACI 318-19 indications about assessing composite elements¿ shear strength, the entire composite element's effective depth was used considering the lower of the compressive strengths of the beam's and slab's concretes and the weighted average of the compressive strengths. Additionally,the entire effective depth and the beam's concrete compressive strength were used. Codes formulations were more precise when estimating the monolithic specimens' shear strengths than those of composites. Therefore, the development of an adapted methodology to assess these elements¿ shear strengths is needed. EC2-20 obtained the most accurate results and gave quite good estimations for composite elements when the entire effective depth and weighted average of the concretes compressive strengths were considered., This study forms part of the research conducted at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politècnica de València (UPV, Spain) with concrete supplied by Caplansa. The project has been supported by the Spanish Ministry of Science and Innovation through Projects BIA2015-64672-C4-4-R and RTI2018-099091-B-C21-AR; the Regional Government of Valencia through Project AICO/2018/250, and the European Union with FEDER funds. The authors thank the Spanish Ministry of Economy and Business for Grant BES-2016-078010.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Shear strength assessment of RC members: influence of shear reinforcement and yielding of the flexural reinforcement

  • Monserrat López, Andrea
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
[EN] An extensive experimental programme consisting of 15 shear tests on continuous reinforced concrete beams was carried out to assess the shear strength of beams with and without shear reinforcement. The influence of large flexural strains in the shear strength was analysed as the tests were designed to fail in shear after yielding of the flexural reinforcement. The assessment of the shear strength was investigated based on the contribution of the various potential shear-transfer actions following the possibilities offered by Digital Image Correlation (DIC). In this field, several approaches accounting for the role of the various shear-transfer actions have recently been proposed, such as the Critical Shear Crack Theory or the Compression Chord Capacity Model, and significant advances on the analysis of the activation of these shear-transfer actions have been performed by the use of DIC. In this work, detailed surface displacement measurements were performed by means of DIC, allowing to track the development and kinematics of the critical shear crack leading to failure. Based on this information, together with suitable constitutive models, the amount of shear transferred by each shear-transfer action was estimated at different load levels and at failure. The calculated shear strength of the specimens was obtained as the sum of the contribution of the various shear-transfer actions at failure and its comparison with the experimental results showed consistent agreement for the different cases. Based on the results, different conclusions and implications about the contribution of the various shear-transfer actions at shear failure are presented. In general, the contribution of each shear-transfer action is strongly influenced by cracking patterns and by the location, shape and kinematics of the critical shear crack., This research was funded through grants from the Ministerio de Economía y Competitividad of Spain with the research project BIA2015-64672-C4-4-R. The experimental program was developed in the Laboratory of Concrete of the Institute of Concrete Science and Technology (ICITECH) of the Universitat Politècnica de València (UPV). Andrea Monserrat has been particularly supported by the Conselleria d'Educació, Investigació, Cultura i Esport of Generalitat Valenciana (Orden 6/2015, DOCV n. 7615 15.09.2015) with the European Regional Development Fund (ERDF) allocated by the EU. VIC2D software was employed during the research stay of Andrea Monserrat at the EPFL (Lausanne, Switzerland).