Skip to main content

THE VARIABILITY CHALLENGE IN NANO-CMOS AND BEYOND-CMOS: NOVEL IC DESIGN PARADIGMS FOR MITIGATION AND EXPLOITATION (VIGILANT-UPC)

PID2019-103869RB-C33

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Circuit reliability prediction: Challenges and solutions for the device time-dependent variability characterization roadblock

  • Nafria, M.
  • Díaz-Fortuny, Javier
  • Saraza-Canflanca, P.
  • Martín-Martínez, Javier
  • Roca, Elisenda
  • Castro-López, Rafael
  • Rodríguez, Rosana
  • Martín-Lloret, P.
  • Toro-Frias, A.
  • Mateo, D.
  • Barajas, Enrique
  • Aragones, X.
  • Fernández, Francisco V.
Copyright IEEE, The characterization of the MOSFET Time-Dependent Variability (TDV) can be a showstopper for reliability-Aware circuit design in advanced CMOS nodes. In this work, a complete MOSFET characterization flow is presented, in the context of a physics-based TDV compact model, that addresses the main TDV characterization challenges for accurate circuit reliability prediction at design time. The pillars of this approach are described and illustrated through examples., This work was supported by the VIGILANT Project (PID2019-103869RB / AEI / 10.13039/501100011033) and the TEC2016-75151-C3-R Project (AEI/FEDER, UE)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Stochastic resonance exploration in current-driven ReRAM devices

  • Cirera Hernandez, Albert
  • Vourkas, Ioannis
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
  • Pérez Leiva, Marcelo Alejandro
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Advances in emerging resistive random-access memory (ReRAM) technology show promise for its use in future computing systems, enabling neuromorphic and memory-centric computing architectures. However, one aspect that holds back the widespread practical use of ReRAM is the behavioral variability of resistive switching devices. In this context, a radically new path towards ReRAM-based electronics concerns the exploitation of noise and the Stochastic Resonance (SR) phenomenon as a mechanism to mitigate the impact of variability. While SR has been already demonstrated in ReRAM devices and its potential impact has been analyzed for memory applications, related works have only focused on voltage input signals. In this work we present preliminary results concerning the exploration of SR in current-driven ReRAM devices, commercially available by Knowm Inc. Our results indicate that additive noise of amplitude s = 0.125uA can stabilize the cycling performance of the devices, whereas higher noise amplitude improves the HRS-LRS resistance window, thus could affect positively the Bit Error Rate (BER) metric in ReRAM memory applications., Supported by the Chilean research grants FONDECYT INICIACION 11180706 and ANID-Basal FB0008, and by the Spanish MCIN grants PID2019-105658RB-I00, and MCIN/AEI/10.13039/501100011033 grant PID2019-103869RB-C33., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Two examples of approximate arithmetic to reduce hardware complexity and power consumption

  • Fornt Mas, Jordi
  • Jin, Leixin
  • Etxezarreta, Imanol
  • Fontova, Pau
  • Altet Sanahujes, Josep|||0000-0002-6939-6475
  • Calomarde Palomino, Antonio|||0000-0002-4459-8505
  • Morancho Llena, Enrique|||0000-0003-2403-8145
  • Moll Echeto, Francisco de Borja|||0000-0002-1290-3253
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., As the end of Moore's Law approaches, electronic system designers must find ways to keep up with the ever increasing computational demands of the modern era. Some computationally intensive applications, such as multimedia processing, computer vision and artificial intelligence, present a unique feature that makes them especially suitable for hardware-level optimizations: their inherent robustness to noise and errors. This allows circuit designers to relax the constraint that arithmetic operations, such as multiplications and additions, must be completely accurate. Instead, approximations can be used in the arithmetic units, enabling system-level reductions in hardware area and power consumption, as well as improvements in performance, while hardly affecting the output of the final application. In this work, we explore two approximate arithmetic techniques. First, we consider approximations at the circuit design level by implementing several approximate multiplier units and evaluating their accuracy when used in executing YOLOv3, a state-of-the-art camera-based object detection deep neural network. Second, we apply the technique of overscaling to induce approximations in adder circuits by aggressively undervoltaging and overclocking them, and we compare the behavior of exact and approximate adders under these conditions. We find that, on one hand, some approximate multipliers are able to execute the YOLO network with almost no effect on the results, and on the other, approximate adder circuits are much more resilient to overscaling techniques than exact adders., This work was partially supported by Spanish MCIN/AEI/10.13039/501100011033, Project PID2019-103869RB-C33., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Stochastic resonance effect in binary STDP performed by RRAM devices

  • Salvador Aguilera, Emili
  • Rodríguez Martínez, Rosana
  • Martin Martínez, Javier
  • Crespo Yepes, Albert
  • Miranda Castellano, Enrique Alberto
  • Nafría Maqueda, Montserrat|||0000-0002-9549-2890
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
  • Ntinas, Vasileios|||0000-0002-2367-5567
  • Sirakoulis, Georgios Ch.
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The beneficial role of noise in the binary spike time dependent plasticity (STDP) learning rule, when implemented with memristors, is experimentally analyzed. The two memristor conductance states, which emulate the neuron synapse in neuromorphic architectures, can be better distinguished if a gaussian noise is added to the bias. The addition of noise allows to reach memristor conductances which are proportional to the overlap between pre- and post-synaptic pulses., This research was funded by the Spanish MCIN/AEI/10.13039/501100011033, Projects PID2019- 103869RB and TEC2017-90969-EXP. The Spanish MicroNanoFab ICTS is acknowledged for sample fabrication., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Circuit topology and synthesis flow co-design for the development of computational ReRAM

  • Fernandez Hernandez, Carlos
  • Vourkas, Ioannis
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Emerging memory technologies will play a decisive role in the quest for more energy-efficient computing systems. Computational ReRAM structures based on resistive switching devices (memristors) have been explored for in-memory computations using the resistance of ReRAM cells for storage and for logic I/O representation. Such approach presents three major challenges: the support for a memristor-oriented logic style, the ad-hoc design of memory array driving circuitry for memory and logic operations, and the development of dedicated synthesis tools to instruct the multi-level operations required for the execution of an arbitrary logic function in memory. This work contributes towards the development of an automated design flow for ReRAM-based computational memories, highlighting some important HW-SW co-design considerations. We briefly present a case study concerning a synthesis flow for a nonstateful logic style and the co-design of the underlying 1T1R crossbar array driving circuit. The prototype of the synthesis flow is based on the ABC tool and the Z3 solver. It executes fast owing to the level-by-level mapping of logic gates. Moreover, it delivers a mapping that minimizes the logic function latency through parallel logic operations, while also using the less possible ReRAM cells., Supported by Synopsys, Chile, by the Chilean grants FONDECYT Regular 1221747 and ANID-Basal FB0008, and by the Spanish MCIN/AEI/10.13039/501100011033 grant PID2019-103869RB-C33, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An ultra low-voltage RF front-end receiver for IoT devices

  • Malena, Francesco
  • Aragonès Cervera, Xavier|||0000-0003-1352-8675
  • Mateo Peña, Diego|||0000-0001-5996-9092
  • Caselli, Michele
  • Boni, Andrea
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the design of an RF receiver front-end for IoT application, integrating a low noise amplifier (LNA) and an active mixer. The circuit is designed in 28-nm FDSOI technology, to operate on the ISM 2.4-2.5 GHz band. The inductor-less LNA exploits the parasitic package inductance as resonant load, limiting chip area and costs. The receiver, designed for the stringent requirements of the application, operates with a voltage supply of 0.35 V, and it exhibits in simulation a power consumption below 45 µW. Besides, it achieves a voltage gain of 27.4 dB, a Third Order Input Intercept Point (IIP3) of-26.8dBm, and a noise Figure (NF) of 12.8 dB, with an intermediate frequency (FI) of 2 MHz. The small area of only 0.0021 mm2, combined with the low power consumption and operating voltage, makes the proposed RF receiver well-suited for the IoT application domain., This research was funded by Spanish MCIN/AEI/10.13039/501100011033, Project PID2019- 103869RB-C33., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

On the fitting and improvement of RRAM stanford-based model parameters using TiN/Ti/HfO2/W experimental data

  • Mahboubi, Vahab|||0000-0001-7859-4230
  • Arumi Delgado, Daniel|||0000-0002-6638-7485
  • Gómez Pau, Álvaro|||0000-0002-7774-1662
  • Rodríguez Montañés, Rosa|||0000-0001-6231-0862
  • Manich Bou, Salvador|||0000-0001-5265-1209
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The use of Resistive Random Access Memory (RRAM) devices is becoming pervasive in many applications. In particular, security based primitives can exploit their variability and non-volatility for generating cells for Non-Volatile Secure Memory (NVSM) and Physically Unclonable Function (PUF). Stanford-PKU Resistive Random Access Memory (RRAM) model is a successful model that has been used for simulating different types of RRAM-based systems. However, some circuit-related problems appear when more than one device are coupled together. In this paper, a parameter fitting is performed for a real TiN/Ti/HfO 2 /W RRAMs and the statistical characteristics of the variability in the experimental data are analyzed and included in order to obtain a more reliable model for simulations., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities under Grant PID2019-103869RB-C33/ AEI /10.13039/501100011033, and through FEDER funds under Grant TEC2017- 84321-C4-1-R., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Novel circuit design methodology with graphene nanoribbon based devices

  • Rallis, Konstantinos|||0000-0003-0501-5554
  • Dimitrakopoulos, Giorgos
  • Dimitrakis, Panagiotis
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
  • Cotofana, Sorin
  • Karafyllidis, Ioannis
  • Sirakoulis, Georgios Ch.
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene has attracted a high amount of interest in recent years in many research fields, including the field of electronics. Due to its spectacular properties, it is investigated as a candidate material for the realization of nanodevices that will constitute conventional or even unconventional computing circuits. In this work, we explore the ability of Graphene Nanoribbon based topologies to create a universal computing set. We propose the design of an AND, OR and NOT gate, as well as the design of a Buffer, for the first time in a configuration similar to the Pass Transistor Logic (PTL) configuration. The valid operation of the proposed topologies is verified through accurate SPICE simulations, providing the ability to design combinational logic using Graphene, based on PTL methodology., This research was supported in part by the Spanish MCIN/AEI/10.13039/501100011033, Project PID2019-103869RB-C33 and grant 391 (with the support of the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Beneficial role of noise in Hf-based memristors

  • Rodriguez, Rosana
  • Martin Martinez, Javier
  • Salvador, Emili
  • Crespo Yepes, Albert
  • Miranda, Enrique Alberto
  • Nafria, Montserrat
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
  • Ntinas, Vasileios|||0000-0002-2367-5567
  • Sirakoulis, Georgios Ch.
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The beneficial role of noise in the performance of Hf-based memristors has been experimentally studied. The addition of an external gaussian noise to the bias circuitry positively impacts the memristors characteristics by increasing the OFF/ON resistances ratio. The known stochastic resonance effect has been observed, when changing the standard deviation of the noise. The influence of the additive noise on the memristor current-voltage characteristic and on the set and reset related parameters are also presented., This research was funded by Spanish MCIN/AEI/10.13039/501100011033, Project PID2019- 103869RB and TEC2017-90969-EXP., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Using current to drive two SDC memristors connected in series and in anti-series

  • Cirera Hernandez, Albert
  • Garrido, Blas
  • Miribel, Pere
  • Colomer-Farrarons, Jordi
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
  • Vourkas, Ioannis
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Networks of bipolar memristors have a rich collective switching behavior, which can be exploited in computing applications. Such a small network is formed by a pair of bipolar memristors connected in a series or anti-series configuration. The latter is known as complementary resistive switch (CRS), and has been studied for memory and for logic applications. While CRS structures have been investigated with voltage-based driving schemes, the collective behavior of current-driven networks of memristors has not yet been explored. To this end, here we present preliminary experimental results from two bipolar self-directed channel (SDC) memristors by Knowm Inc., connected in series with the same or the opposite polarity, driven by current. The amplitude of the applied current pulses varied between |0.1 uA| and |1.0 uA|. The results demonstrate that current-based driving is effective for programming simultaneously memristors that are connected in series. Moreover, the devices in the CRS configuration respond in a complementary way to the applied input current. We observed a stable and uniform performance of the devices in all our experiments. Current pulses of |0.1 uA| did not affect the state of the memristors, so they can be used to perform READ operations in current-driven resistive memory modules., Funded in part by ANID (Chile) grants Basal FB0008 and FONDECYT No. 1221747; also by MICINN (Spain) Grants TED2021-129643B-I00 (FLEXRRAM Project) and PID2019-105658RB-I00 (PRITES Project), and by MCIN/AEI/10.13039/501100011033 Project PID2019-103869RB-C33, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A circuit-level SPICE modeling strategy for the simulation of behavioral variability in ReRAM

  • Cayo, Jose
  • Vourkas, Ioannis
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The intrinsic behavioral variability in resistive switching devices (also known as 'memristors' or 'ReRAM devices') can be a reliability limiting factor or an opportunity for applications where randomness of resistance switching is essential, such as hardware security and stochastic computing. The realistic assessment of ReRAM-based circuits & systems towards practical exploitation requires variability-aware ReRAM modeling. In this context, here we present a versatile, circuit-level implementation strategy to incorporate cycle-to-cycle (C2C) variability to the ReRAM model parameters in SPICE simulations. We evaluated the proposed approach with threshold-based models of a voltage-controlled bipolar ReRAM device and managed to reproduce the main features observed in experimental curves for different pulsed voltage inputs. With key upgrades, compared to previous approaches found in the literature, our strategy enables the enhancement of any ReRAM device model towards the exploration of new ways to make the most of the C2C ReRAM variability, and to test the robustness of any designed circuits & systems against ReRAM variability., Supported by the Chilean research grants ANID-Basal FB0008 and FONDECYT Regular 1221747, and by the Spanish MCIN/AEI/10.13039/501100011033 grant PID2019-103869RB-C33., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An ultra low-voltage RF front-end receiver for IoT devices

  • Malena, Francesco
  • Aragonès Cervera, Xavier
  • Mateo Peña, Diego
  • Caselli, Michele
  • Boni, Andrea
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the design of an RF receiver front-end for IoT application, integrating a low noise amplifier (LNA) and an active mixer. The circuit is designed in 28-nm FDSOI technology, to operate on the ISM 2.4-2.5 GHz band. The inductor-less LNA exploits the parasitic package inductance as resonant load, limiting chip area and costs. The receiver, designed for the stringent requirements of the application, operates with a voltage supply of 0.35 V, and it exhibits in simulation a power consumption below 45 µW. Besides, it achieves a voltage gain of 27.4 dB, a Third Order Input Intercept Point (IIP3) of-26.8dBm, and a noise Figure (NF) of 12.8 dB, with an intermediate frequency (FI) of 2 MHz. The small area of only 0.0021 mm2, combined with the low power consumption and operating voltage, makes the proposed RF receiver well-suited for the IoT application domain., This research was funded by Spanish MCIN/AEI/10.13039/501100011033, Project PID2019- 103869RB-C33., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Design and simulation of peripheral driving circuitry for computational ReRAM, Diseño y simulación de circuito periférico de actuación para ReRAM computacional

  • Fernández López, Cristina
  • Vourkas, Ioannis
  • Rubio Sola, Jose Antonio
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., As an alternative approach to the von Neumann architecture, the notion of computational resistive random- access memory (ReRAM) has emerged, promising faster and more energy-efficient computing systems. In this context, we present a classification of ReRAM-compatible logic design strategies and highlight the potential of nonstateful ratioed logic for computational ReRAM modules. We provide insights towards the design of ad-hoc peripheral circuitry that allows the fusion of memory and ratioed logic operations in the ReRAM module in a reliable manner; i.e., the driving/sensing circuitry allows carrying out memory operations and in-memory multi- level ratioed logic operations. To this end, we present in detail a computational ReRAM driver and focus our description on the operational features that enable memory/logic operations in every row of the crossbar array. We validate circuit functionality through LTSpice simulations for read/write memory and logic operations using a threshold-type bipolar ReRAM device model. The presented practical solutions contribute to the viable development of computational ReRAM., Supported by Synopsys, Chile, by the Chilean grants FONDECYT Regular 1221747 and ANID-Basal FB0008, by the UTFSM Initiation in Scientific Investigation Program (PIIC) grant 016/2021, and by the Spanish MCIN/AEI/10.13039/501100011033 grant PID2019-103869RB-C33., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A circuit-level SPICE modeling strategy for the simulation of behavioral variability in ReRAM

  • Cayo, Jose
  • Vourkas, Ioannis
  • Rubio Sola, Jose Antonio
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The intrinsic behavioral variability in resistive switching devices (also known as 'memristors' or 'ReRAM devices') can be a reliability limiting factor or an opportunity for applications where randomness of resistance switching is essential, such as hardware security and stochastic computing. The realistic assessment of ReRAM-based circuits & systems towards practical exploitation requires variability-aware ReRAM modeling. In this context, here we present a versatile, circuit-level implementation strategy to incorporate cycle-to-cycle (C2C) variability to the ReRAM model parameters in SPICE simulations. We evaluated the proposed approach with threshold-based models of a voltage-controlled bipolar ReRAM device and managed to reproduce the main features observed in experimental curves for different pulsed voltage inputs. With key upgrades, compared to previous approaches found in the literature, our strategy enables the enhancement of any ReRAM device model towards the exploration of new ways to make the most of the C2C ReRAM variability, and to test the robustness of any designed circuits & systems against ReRAM variability., Supported by the Chilean research grants ANID-Basal FB0008 and FONDECYT Regular 1221747, and by the Spanish MCIN/AEI/10.13039/501100011033 grant PID2019-103869RB-C33., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

On the fitting and improvement of RRAM stanford-based model parameters using TiN/Ti/HfO2/W experimental data

  • Mahboubi, Vahab
  • Arumi Delgado, Daniel
  • Gómez Pau, Álvaro
  • Rodríguez Montañés, Rosa
  • Manich Bou, Salvador
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The use of Resistive Random Access Memory (RRAM) devices is becoming pervasive in many applications. In particular, security based primitives can exploit their variability and non-volatility for generating cells for Non-Volatile Secure Memory (NVSM) and Physically Unclonable Function (PUF). Stanford-PKU Resistive Random Access Memory (RRAM) model is a successful model that has been used for simulating different types of RRAM-based systems. However, some circuit-related problems appear when more than one device are coupled together. In this paper, a parameter fitting is performed for a real TiN/Ti/HfO 2 /W RRAMs and the statistical characteristics of the variability in the experimental data are analyzed and included in order to obtain a more reliable model for simulations., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities under Grant PID2019-103869RB-C33/ AEI /10.13039/501100011033, and through FEDER funds under Grant TEC2017- 84321-C4-1-R., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Circuit topology and synthesis flow co-design for the development of computational ReRAM

  • Fernandez Hernandez, Carlos
  • Vourkas, Ioannis
  • Rubio Sola, Jose Antonio
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Emerging memory technologies will play a decisive role in the quest for more energy-efficient computing systems. Computational ReRAM structures based on resistive switching devices (memristors) have been explored for in-memory computations using the resistance of ReRAM cells for storage and for logic I/O representation. Such approach presents three major challenges: the support for a memristor-oriented logic style, the ad-hoc design of memory array driving circuitry for memory and logic operations, and the development of dedicated synthesis tools to instruct the multi-level operations required for the execution of an arbitrary logic function in memory. This work contributes towards the development of an automated design flow for ReRAM-based computational memories, highlighting some important HW-SW co-design considerations. We briefly present a case study concerning a synthesis flow for a nonstateful logic style and the co-design of the underlying 1T1R crossbar array driving circuit. The prototype of the synthesis flow is based on the ABC tool and the Z3 solver. It executes fast owing to the level-by-level mapping of logic gates. Moreover, it delivers a mapping that minimizes the logic function latency through parallel logic operations, while also using the less possible ReRAM cells., Supported by Synopsys, Chile, by the Chilean grants FONDECYT Regular 1221747 and ANID-Basal FB0008, and by the Spanish MCIN/AEI/10.13039/501100011033 grant PID2019-103869RB-C33, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Using current to drive two SDC memristors connected in series and in anti-series

  • Cirera Hernandez, Albert
  • Garrido, Blas
  • Miribel, Pere
  • Colomer-Farrarons, Jordi
  • Rubio Sola, Jose Antonio
  • Vourkas, Ioannis
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Networks of bipolar memristors have a rich collective switching behavior, which can be exploited in computing applications. Such a small network is formed by a pair of bipolar memristors connected in a series or anti-series configuration. The latter is known as complementary resistive switch (CRS), and has been studied for memory and for logic applications. While CRS structures have been investigated with voltage-based driving schemes, the collective behavior of current-driven networks of memristors has not yet been explored. To this end, here we present preliminary experimental results from two bipolar self-directed channel (SDC) memristors by Knowm Inc., connected in series with the same or the opposite polarity, driven by current. The amplitude of the applied current pulses varied between |0.1 uA| and |1.0 uA|. The results demonstrate that current-based driving is effective for programming simultaneously memristors that are connected in series. Moreover, the devices in the CRS configuration respond in a complementary way to the applied input current. We observed a stable and uniform performance of the devices in all our experiments. Current pulses of |0.1 uA| did not affect the state of the memristors, so they can be used to perform READ operations in current-driven resistive memory modules., Funded in part by ANID (Chile) grants Basal FB0008 and FONDECYT No. 1221747; also by MICINN (Spain) Grants TED2021-129643B-I00 (FLEXRRAM Project) and PID2019-105658RB-I00 (PRITES Project), and by MCIN/AEI/10.13039/501100011033 Project PID2019-103869RB-C33, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Stochastic resonance effect in binary STDP performed by RRAM devices

  • Salvador Aguilera, Emili
  • Rodríguez Martínez, Rosana
  • Martin Martínez, Javier
  • Crespo Yepes, Albert
  • Miranda Castellano, Enrique Alberto
  • Nafría Maqueda, Montserrat
  • Rubio Sola, Jose Antonio
  • Ntinas, Vasileios
  • Sirakoulis, Georgios Ch.
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The beneficial role of noise in the binary spike time dependent plasticity (STDP) learning rule, when implemented with memristors, is experimentally analyzed. The two memristor conductance states, which emulate the neuron synapse in neuromorphic architectures, can be better distinguished if a gaussian noise is added to the bias. The addition of noise allows to reach memristor conductances which are proportional to the overlap between pre- and post-synaptic pulses., This research was funded by the Spanish MCIN/AEI/10.13039/501100011033, Projects PID2019- 103869RB and TEC2017-90969-EXP. The Spanish MicroNanoFab ICTS is acknowledged for sample fabrication., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Exploring different circuit-level approaches to the forming of resistive random access memories

  • Cirera, Albert
  • Fernandez, Carlos
  • Vourkas, Ioannis
  • Rubio Sola, Jose Antonio
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Advances in emerging resistive random-access memory (ReRAM) technology show promise to be used in future memory-centric computing systems. In ReRAM arrays that consist of two-terminal bipolar resistive switching (RS) devices, SET/RESET programming voltage pulses are used to switch them from low resistance state (LRS) to high resistance state (HRS). The recent commercialization of discrete and crossbar-array organized RS devices have certainly pushed forward experimentation with such emerging memory technology. One barrier still preventing their widespread practical use is the behavioral variability and the lack of a straightforward manner to implement the forming process and achieve uniform SET/RESET programing. In this paper, different circuit topologies and approaches are explored to perform the forming of the conductive channel in commercial discrete RS devices by Knowm Inc. A target-resistance is pursued through pulsed voltage stress, followed by cycle-to-cycle stabilization using a custom transimpedance amplifier circuit. Moreover, a voltage controlled low-current source is proposed as an approach to alleviate the complexity and risk of the forming process in device characterization., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Beneficial role of noise in Hf-based memristors

  • Rodriguez, Rosana
  • Martin Martinez, Javier
  • Salvador, Emili
  • Crespo Yepes, Albert
  • Miranda, Enrique Alberto
  • Nafria, Montserrat
  • Rubio Sola, Jose Antonio
  • Ntinas, Vasileios
  • Sirakoulis, Georgios Ch.
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The beneficial role of noise in the performance of Hf-based memristors has been experimentally studied. The addition of an external gaussian noise to the bias circuitry positively impacts the memristors characteristics by increasing the OFF/ON resistances ratio. The known stochastic resonance effect has been observed, when changing the standard deviation of the noise. The influence of the additive noise on the memristor current-voltage characteristic and on the set and reset related parameters are also presented., This research was funded by Spanish MCIN/AEI/10.13039/501100011033, Project PID2019- 103869RB and TEC2017-90969-EXP., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Two examples of approximate arithmetic to reduce hardware complexity and power consumption

  • Fornt Mas, Jordi
  • Jin, Leixin
  • Etxezarreta, Imanol
  • Fontova, Pau
  • Altet Sanahujes, Josep
  • Calomarde Palomino, Antonio
  • Morancho Llena, Enrique
  • Moll Echeto, Francisco de Borja
  • Rubio Sola, Jose Antonio
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., As the end of Moore's Law approaches, electronic system designers must find ways to keep up with the ever increasing computational demands of the modern era. Some computationally intensive applications, such as multimedia processing, computer vision and artificial intelligence, present a unique feature that makes them especially suitable for hardware-level optimizations: their inherent robustness to noise and errors. This allows circuit designers to relax the constraint that arithmetic operations, such as multiplications and additions, must be completely accurate. Instead, approximations can be used in the arithmetic units, enabling system-level reductions in hardware area and power consumption, as well as improvements in performance, while hardly affecting the output of the final application. In this work, we explore two approximate arithmetic techniques. First, we consider approximations at the circuit design level by implementing several approximate multiplier units and evaluating their accuracy when used in executing YOLOv3, a state-of-the-art camera-based object detection deep neural network. Second, we apply the technique of overscaling to induce approximations in adder circuits by aggressively undervoltaging and overclocking them, and we compare the behavior of exact and approximate adders under these conditions. We find that, on one hand, some approximate multipliers are able to execute the YOLO network with almost no effect on the results, and on the other, approximate adder circuits are much more resilient to overscaling techniques than exact adders., This work was partially supported by Spanish MCIN/AEI/10.13039/501100011033, Project PID2019-103869RB-C33., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Novel circuit design methodology with graphene nanoribbon based devices

  • Rallis, Konstantinos
  • Dimitrakopoulos, Giorgos
  • Dimitrakis, Panagiotis
  • Rubio Sola, Jose Antonio
  • Cotofana, Sorin
  • Karafyllidis, Ioannis
  • Sirakoulis, Georgios Ch.
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene has attracted a high amount of interest in recent years in many research fields, including the field of electronics. Due to its spectacular properties, it is investigated as a candidate material for the realization of nanodevices that will constitute conventional or even unconventional computing circuits. In this work, we explore the ability of Graphene Nanoribbon based topologies to create a universal computing set. We propose the design of an AND, OR and NOT gate, as well as the design of a Buffer, for the first time in a configuration similar to the Pass Transistor Logic (PTL) configuration. The valid operation of the proposed topologies is verified through accurate SPICE simulations, providing the ability to design combinational logic using Graphene, based on PTL methodology., This research was supported in part by the Spanish MCIN/AEI/10.13039/501100011033, Project PID2019-103869RB-C33 and grant 391 (with the support of the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Stochastic resonance exploration in current-driven ReRAM devices

  • Cirera Hernandez, Albert
  • Vourkas, Ioannis
  • Rubio Sola, Jose Antonio
  • Pérez Leiva, Marcelo Alejandro
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Advances in emerging resistive random-access memory (ReRAM) technology show promise for its use in future computing systems, enabling neuromorphic and memory-centric computing architectures. However, one aspect that holds back the widespread practical use of ReRAM is the behavioral variability of resistive switching devices. In this context, a radically new path towards ReRAM-based electronics concerns the exploitation of noise and the Stochastic Resonance (SR) phenomenon as a mechanism to mitigate the impact of variability. While SR has been already demonstrated in ReRAM devices and its potential impact has been analyzed for memory applications, related works have only focused on voltage input signals. In this work we present preliminary results concerning the exploration of SR in current-driven ReRAM devices, commercially available by Knowm Inc. Our results indicate that additive noise of amplitude s = 0.125uA can stabilize the cycling performance of the devices, whereas higher noise amplitude improves the HRS-LRS resistance window, thus could affect positively the Bit Error Rate (BER) metric in ReRAM memory applications., Supported by the Chilean research grants FONDECYT INICIACION 11180706 and ANID-Basal FB0008, and by the Spanish MCIN grants PID2019-105658RB-I00, and MCIN/AEI/10.13039/501100011033 grant PID2019-103869RB-C33., Peer Reviewed, Postprint (author's final draft)