Skip to main content

ANALISIS DEL EFECTO MULTIPACTOR Y DISEÑO DE NUEVOS DISPOSITIVOS DE ALTA POTENCIA BASADOS EN TECNOLOGIA GUIADA CON MATERIALES DIELECTRICOS Y MAGNETICOS

TEC2013-47037-C5-4-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD MIGUEL HERNANDEZ DE ELCHE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Study of Periodic Dielectric Frequency-selective Surfaces under 3D Plane Wave Incidence

  • Coves Soler, Ángela María
  • Marini, Stephan
  • Gimeno Martínez, Benito
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
A periodic Dielectric Frequency-Selective Surface (DFSS) is studied under 3D plane-wave incidence, whose unit cell in the periodic direction is composed of a dielectric grating and a homogeneous dielectric layer. The structure is excited by a linearly polarized plane-wave. The procedure for computing the Brillouin diagram of the structure under 2D plane-wave incidence with TE or TM polarization was already described by the authors, and the extension to the 3D incidence case has been performed in a similar way. Following the same formalism, it has been obtained the Generalized Scattering Matrix (GSM) of one period of the infinite periodic lattice. This requires the knowledge of the modal spectrum in both homogeneous and periodic dielectric media. To this end, a numerical technique based on a vectorial modal method originally proposed by the authors has been used. Once the S matrix of one period of the periodic medium is computed, the corresponding generalized ABCD matrix of the unit cell can be easily derived, which provides a standard multimodal eigenvalue matrix problem whose solution yields the transverse field distributions and the modal propagation constants in the periodic lattice. In the 3D incidence case, a given number of modes considered in the construction of the ABCD matrix yields the dispersion diagram of TE and TM modes simultaneously. The identification of the modes can be easily performed through the comparison of their dispersion diagram with the reflectance spectra of the structure under a given incidence polarization (TE or TM). Finally, some numerical result effects, varying the incidence direction of the exciting plane-wave in the dispersion diagram of an Electromagnetic Band Gap (EBG) material, are shown.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A novel band-pass filter based on a periodically drilled SIW structure

  • Coves Soler, Ángela María
  • Torregrosa-Penalva, Germán
  • San Blas Oltra, Ángel Antonio
  • Sánchez-Soriano, Miguel Ángel
  • Martellosio, Andrea
  • Bronchalo, Enrique
  • Bozzi, Maurizio
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
The design and fabrication of a band-pass step impedance filter based on high and low dielectric constant sections has been realized on substrate integrated waveguide (SIW) technology. The overall process includes the design of the ideal band-pass prototype filter, where the implementation of the impedance inverters has been carried out by means of waveguide sections of lower permittivity. This can be practically achieved by implementing arrays of air holes along the waveguide. Several SIW structures with and without arrays of air holes have been simulated and fabricated in order to experimentally evaluate their relative permittivity. Additionally, the equivalent filter in SIW technology has been designed and optimized. Finally, a prototype of the designed filter has been fabricated and measured, showing a good agreement between measurements and simulations, which demonstrates the validity of the proposed design approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Computation of Ohmic Losses in Arbitrarily Shaped Waveguide Structures Using Perturbation of Boundary Conditions and BI-RME Method

  • Marini, Stephan
  • Soto Pacheco, Pablo
  • Mattes, Michael
  • Coves Soler, Ángela María
  • Gimeno Martínez, Benito
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
In this work, ohmic losses present in arbitrarily shaped waveguide-based structures are rigorously considered. For such purpose, a software tool based on the perturbation of the boundary conditions on the metallic walls of the waveguides combined with an Integral-Equation (IE) analysis technique is proposed. In order to obtain the modal chart of waveguides with arbitrary cross-section, the Boundary Integral – Resonant Mode Expansion (BI-RME) method is also employed. To show the advantages of the proposed technique a computer-aided design software package based on this modal analysis tool has been applied to predict the propagation loss effects in complex waveguide components.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Low-cost Implementation of a Waveguide-based Microwave Filter in Substrate Integrated Waveguide (SIW) Technology

  • Coves Soler, Ángela María
  • San Blas Oltra, Ángel Antonio
  • Marini, Stephan
  • Torregrosa, Germán
  • Bronchalo, Enrique
  • Martellosio, Andrea
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
This paper presents the design and practical implementation of a waveguide-based microwave filter in Substrate Integrated Waveguide (SIW) technology. The use of SIW technology for implementing waveguide filters makes the presented design specially aimed for being used in undergraduate courses related to microwave engineering and filter designing. Their low cost and easiness from the filter fabrication point of view allows their use in microwave laboratory courses where students can implement their own theoretical filter designs and measure their frequency response. The requiring mechanics in the manufacturing of microwave filters in waveguide technology (both rectangular and circular) makes its use practically unfeasible in academic laboratories because of its cost. For this reason, a practical design example of a waveguide iris filter using the impedance inverter model is proposed in this paper for academic laboratories, using SIW technology. This is a low cost and easy to manufacture technology. The overall process includes the design of the ideal band-pass prototype filter using the impedance inverter and its implementation in an inductive iris-coupled waveguide filter, by using a developed electromagnetic simulator based on the mode-matching technique. Finally, the equivalent filter in SIW technology is obtained and optimized by using HFSS simulator, including a SIW to microstrip transition. A prototype of the designed filter has been fabricated and measured, showing a good agreement between measurements and simulations.