Skip to main content

ANALISIS DEL EFECTO MULTIPACTOR Y DISEÑO DE NUEVOS DISPOSITIVOS DE ALTA POTENCIA BASADOS EN TECNOLOGIA GUIADA CON MATERIALES DIELECTRICOS Y MAGNETICOS

TEC2013-47037-C5-4-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD MIGUEL HERNANDEZ DE ELCHE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electron Emission of Pt: Experimental Study and Comparison With Models in the Multipactor Energy Range

  • Bronchalo, Enrique
  • Coves, Angela
  • Mata Sanz, Rafael
  • Gimeno Martinez, Benito
  • Montero, Isabel
  • Galán, Luis
  • Mercadé-Morales, Laura
  • Sanchis Kilders, Esteban
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
Experimental data of secondary emission yield (SEY) and electron emission spectra of Pt under electron irradiation for normal incidence and primary energies lower than 1 keV are presented. Several relevant magnitudes, as total SEY, elastic backscattering probability, secondary emission spectrum, and backscattering coefficient, are given for different primary energies. These magnitudes are compared with theoretical or semiempirical, This work was supported in part by the Ministerio de Economia y Competitividad under Project TEC2013-47037-C5-4-R, and in part by MICIIN through the Space Programme under Project AYA2012-39832-C02-01/02. The review of this paper was arranged by Editor M. Thumm.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Highly efficient full-wave electromagnetic analysis of 3D arbitrarily-shaped waveguide microwave devices using an integral equation technique

  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • San Blas Oltra, Ángel Antonio
  • Quesada Pereira, Fernando Daniel
  • Pérez Soler, Francisco Javier
  • Gil Raga, Jordi
  • Vicente Quiles, Carlos Pascual
  • Gimeno Martinez, Benito
A novel technique for the full-wave analysis of 3-D complex waveguide devices is presented. This new formulation, based on the Boundary Integral-Resonant Mode Expansion (BI-RME) method, allows the rigorous full-wave electromagnetic characterization of 3-D arbitrarily shaped metallic structures making use of extremely low CPU resources (both time and memory). The unknown electric current density on the surface of the metallic elements is represented by means of Rao-Wilton-Glisson basis functions, and an algebraic procedure based on a singular value decomposition is applied to transform such functions into the classical solenoidal and nonsolenoidal basis functions needed by the original BI-RME technique. The developed tool also provides an accurate computation of the electromagnetic fields at an arbitrary observation point of the considered device, so it can be used for predicting high-power breakdown phenomena. In order to validate the accuracy and efficiency of this novel approach, several new designs of band-pass waveguides filters are presented. The obtained results (S-parameters and electromagnetic fields) are successfully compared both to experimental data and to numerical simulations provided by a commercial software based on the finite element technique. The results obtained show that the new technique is specially suitable for the efficient full-wave analysis of complex waveguide devices considering an integrated coaxial excitation, where the coaxial probes may be in contact with the metallic insets of the component., This work was supported by the Ministerio de Economia y Competitividad, Spanish Government, under the Research Projects TEC2013-47037-C5-1-R and TEC2013-47037-C5-4-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Practical Design of Filters Using EBG Waveguides Periodically Loaded with Metal Ridges

  • MARINI, STEPHAN
  • COVES, ANGELA
  • GIMENO MARTINEZ, BENITO
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The dispersion diagram of infinite periodic structures is useful for the practical design of waveguide filters. Starting from the dispersion diagram of a unit cell, it is possible to generate a finite structure with very similar pass- and stop-bands (gaps). However, truncation of the infinite periodic structure degrades the pass-band performance. In this paper, these impairments are overcome by means of suitable waveguide tapers matching the impedance of the periodic structure to the access ports. As a result, the design of practical low-pass filters, derived from passive structures based on Electromagnetic Band-Gap (EBG) waveguides periodically loaded with metal ridges, is successfully addressed. According to this procedure, a five-order and an eight-order EBG low-pass filters are obtained after an optimization step. Measurements of a manufactured prototype fully validate the proposed approach., This work was supported by the Ministerio de Economía y Competitividad (MINECO), Spanish Government, under the R&D projects TEC2013-47037-C5-1-R and TEC2013-47037-C5-4-R. The authors would like to thank ITACA (Instituto de Aplicaciones de las Tecnologías y de las Comunicaciones Avanzadas), from Technical University of Valencia (Valencia, Spain), for their support in the accurate manufacturing of the low-pass filter prototype
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-Power Multicarrier Generation for RF Breakdown Testing

  • Monerris Belda, Óscar
  • Díaz Caballero, Elena
  • Gimeno Martinez, Benito
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
Testing of satellite components for high RF power breakdown effects, such as multipactor and corona or passive-intermodulation, is a topic of growing interest in the aerospaceindustry. Switching fromthe classical single carrier approach to the more realisticmulticarrier scenario is very challenging from the experimental point of view. Themulticarrier signals, amplifiedby several RF power amplifiers, need to have controlled phase, amplitude, and frequency in each carrier. Fine tuning of the signal generator phases is required in order to compensate the phase drift occurring in the active elements of the test bed. This paper presents an efficient and low-cost technique to generate multicarrier signals, valid for testing vacuum breakdown phenomena in satellite components., This work was supported in part by the European High RF Power Space Laboratory of European Space Agency and Val Space Consortium, Laboratory co-Funded by the European Regional Development Fund and in part by the Ministerio de Economia y Competitividad, Spanish Government, under the Research Project TEC 2013-47037-C5-1-R and Project TEC 2013-47037-C5-4-R. The review of this paper was arranged by Editor L. Kumar.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of Narrow-Band Dielectric Frequency-Selective Surfaces for Microwave Applications

  • Coves, Angela
  • Marini, Stephan
  • Gimeno, Benito
  • Sánchez-Escuderos, Daniel
  • Rodriguez Perez, Ana Maria
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
Two types of narrow-band dielectric frequency-selective surfaces (DFSSs) have been designed at microwave frequencies. First, a DFSS showing total reflection has been analysed under guided-mode resonance conditions, based on a single dielectric grating which is illuminated by a TM polarised two-dimensional plane wave at Brewster-angle incidence, presenting extremely low-reflectance sidebands adjacent to the resonance peak. Second, a DFSS exhibiting total transmission at normal TE incidence has been designed, by superimposing the resonance condition of a dielectric grating on the classical high-reflectance response of a periodic (band-gap based) structure formed by alternating homogeneous dielectric layers. Finally, the oblique incidence and polarisation effects on the spectral response of the designed DFSSs have been also studied. In addition, dielectric ohmic losses and the problem of the finite size of the periodic structures have been accounted for in both structures. The obtained results have been successfully validated with the commercial software tool high frequency structure simulator., This work was supported in part by Ministerio de Economia y Competitividad (MINECO) under Coordinated Project TEC2013-47037-C5.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compensation of the impact of low-cost manufacturing techniques in the design of E-plane multiport waveguide junctions

  • San Blas Oltra, Ángel Antonio
  • Roca, J. M.
  • Morro, J. V.
  • Gimeno Martinez, Benito
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this work, a full-wave tool for the accurate analysis and design of compensated E-plane multiport junctions is proposed. The implemented tool is capable of evaluating the undesired effects related to the use of low-cost manufacturing techniques, which are mostly due to the introduction of rounded corners in the cross section of the rectangular waveguides of the device. The obtained results show that, although stringent mechanical effects are imposed, it is possible to compensate for the impact of the cited low-cost manufacturing techniques by redesigning the matching elements considered in the original device. Several new designs concerning a great variety of E-plane components (such as right-angled bends, T-junctions and magic-Ts) are presented, and useful design guidelines are provided. The implemented tool, which is mainly based on the boundary integral-resonant mode expansion technique, has been successfully validated by comparing the obtained results to simulated data provided by a commercial software based on the finite element method., All the data necessary to understand, evaluate, replicate, and generate the figures and results presented in this paper have been included in the present manuscript. A full-wave custom code and the commercial software Ansys HFSS have been used to generate the simulated results provided by the authors. This work was supported by the Ministerio de Economia y Competitividad, Spanish Government, under the Research Projects TEC2013-47037-C5-1-R and TEC2013-47037-C5-4-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Flexible and Efficient Computer-Aided Design (CAD) Tool for Advanced Comb-Line Rectangular Waveguide Filters

  • San Blas Oltra, Ángel Antonio
  • Müller, Andrei
  • Mira Pérez, Fermín Elías
  • Pérez Soler, Francisco Javier
  • Gimeno Martinez, Benito
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] A very flexible and efficient computer-aided design (CAD) tool, specifically suited for advanced comb-line rectangular waveguide filters, is presented in this work. The developed software tool, which makes use of a full-wave analysis technique based on the Boundary Integral-Resonant Mode Expansion method, allows loading the considered comb-line resonators with any number of radially symmetrical partial-height metallic posts. The implemented CAD tool also allows dealing with coupling windows of arbitrary cross-section, thus drastically enhancing the flexibility of the CAD process. The excitation of the analyzed components, which is performed using generalized coaxial probes, has also been integrated in the implemented software tool, thus achieving a full-wave electromagnetic characterization of the whole component. Furthermore, a novel simple procedure to efficiently connect all the obtained wide-band matrices is proposed. To validate the accuracy and efficiency of this novel CAD tool, several new designs concerning advanced band-pass comb-line waveguide filters are presented. The accuracy of the developed CAD tool has been successfully validated by comparing the obtained results with numerical data provided by a commercial tool based on the finite-element method. (C) 2015 Wiley Periodicals, Inc., This work has been supported by the Ministerio de Economia y Competitividad, Spanish Government, under the Research Projects TEC2013-47037-C5-1-R and TEC2013-47037-C5-4-R, as well as by the FP7 PCIG11-2012-322162 Marie Curie CIG grant.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Study of Periodic Dielectric Frequency-selective Surfaces under 3D Plane Wave Incidence

  • Coves Soler, Ángela María
  • Marini, Stephan
  • Gimeno Martínez, Benito
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
A periodic Dielectric Frequency-Selective Surface (DFSS) is studied under 3D plane-wave incidence, whose unit cell in the periodic direction is composed of a dielectric grating and a homogeneous dielectric layer. The structure is excited by a linearly polarized plane-wave. The procedure for computing the Brillouin diagram of the structure under 2D plane-wave incidence with TE or TM polarization was already described by the authors, and the extension to the 3D incidence case has been performed in a similar way. Following the same formalism, it has been obtained the Generalized Scattering Matrix (GSM) of one period of the infinite periodic lattice. This requires the knowledge of the modal spectrum in both homogeneous and periodic dielectric media. To this end, a numerical technique based on a vectorial modal method originally proposed by the authors has been used. Once the S matrix of one period of the periodic medium is computed, the corresponding generalized ABCD matrix of the unit cell can be easily derived, which provides a standard multimodal eigenvalue matrix problem whose solution yields the transverse field distributions and the modal propagation constants in the periodic lattice. In the 3D incidence case, a given number of modes considered in the construction of the ABCD matrix yields the dispersion diagram of TE and TM modes simultaneously. The identification of the modes can be easily performed through the comparison of their dispersion diagram with the reflectance spectra of the structure under a given incidence polarization (TE or TM). Finally, some numerical result effects, varying the incidence direction of the exciting plane-wave in the dispersion diagram of an Electromagnetic Band Gap (EBG) material, are shown.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A novel band-pass filter based on a periodically drilled SIW structure

  • Coves Soler, Ángela María
  • Torregrosa-Penalva, Germán
  • San Blas Oltra, Ángel Antonio
  • Sánchez-Soriano, Miguel Ángel
  • Martellosio, Andrea
  • Bronchalo, Enrique
  • Bozzi, Maurizio
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
The design and fabrication of a band-pass step impedance filter based on high and low dielectric constant sections has been realized on substrate integrated waveguide (SIW) technology. The overall process includes the design of the ideal band-pass prototype filter, where the implementation of the impedance inverters has been carried out by means of waveguide sections of lower permittivity. This can be practically achieved by implementing arrays of air holes along the waveguide. Several SIW structures with and without arrays of air holes have been simulated and fabricated in order to experimentally evaluate their relative permittivity. Additionally, the equivalent filter in SIW technology has been designed and optimized. Finally, a prototype of the designed filter has been fabricated and measured, showing a good agreement between measurements and simulations, which demonstrates the validity of the proposed design approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Computation of Ohmic Losses in Arbitrarily Shaped Waveguide Structures Using Perturbation of Boundary Conditions and BI-RME Method

  • Marini, Stephan
  • Soto Pacheco, Pablo
  • Mattes, Michael
  • Coves Soler, Ángela María
  • Gimeno Martínez, Benito
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
In this work, ohmic losses present in arbitrarily shaped waveguide-based structures are rigorously considered. For such purpose, a software tool based on the perturbation of the boundary conditions on the metallic walls of the waveguides combined with an Integral-Equation (IE) analysis technique is proposed. In order to obtain the modal chart of waveguides with arbitrary cross-section, the Boundary Integral – Resonant Mode Expansion (BI-RME) method is also employed. To show the advantages of the proposed technique a computer-aided design software package based on this modal analysis tool has been applied to predict the propagation loss effects in complex waveguide components.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Low-cost Implementation of a Waveguide-based Microwave Filter in Substrate Integrated Waveguide (SIW) Technology

  • Coves Soler, Ángela María
  • San Blas Oltra, Ángel Antonio
  • Marini, Stephan
  • Torregrosa, Germán
  • Bronchalo, Enrique
  • Martellosio, Andrea
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
This paper presents the design and practical implementation of a waveguide-based microwave filter in Substrate Integrated Waveguide (SIW) technology. The use of SIW technology for implementing waveguide filters makes the presented design specially aimed for being used in undergraduate courses related to microwave engineering and filter designing. Their low cost and easiness from the filter fabrication point of view allows their use in microwave laboratory courses where students can implement their own theoretical filter designs and measure their frequency response. The requiring mechanics in the manufacturing of microwave filters in waveguide technology (both rectangular and circular) makes its use practically unfeasible in academic laboratories because of its cost. For this reason, a practical design example of a waveguide iris filter using the impedance inverter model is proposed in this paper for academic laboratories, using SIW technology. This is a low cost and easy to manufacture technology. The overall process includes the design of the ideal band-pass prototype filter using the impedance inverter and its implementation in an inductive iris-coupled waveguide filter, by using a developed electromagnetic simulator based on the mode-matching technique. Finally, the equivalent filter in SIW technology is obtained and optimized by using HFSS simulator, including a SIW to microstrip transition. A prototype of the designed filter has been fabricated and measured, showing a good agreement between measurements and simulations.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Secondary electron emission of Pt: experimental study and comparison with models in the multipactor energy range

  • Bronchalo, Enrique
  • Coves, Angela
  • Mata, Rafael
  • Gimeno, Benito
  • Montero, Isabel
  • Galán, Luis
  • Boria, Vicente E.
  • Mercadé, Laura
  • Sanchís, Esteban
Experimental data of secondary emission yield (SEY) and electron emission spectra of Pt under electron irradiation for normal incidence and primary energies lower than 1 keV are presented. Several relevant magnitudes, as total SEY, elastic backscattering probability, secondary emission spectrum, and backscattering coefficient, are given for different primary energies. These magnitudes are compared with theoretical or semiempirical formulas commonly used in the related literature., This work was supported by the MINECO under the Research Project TEC2013-47037-C5-4-R, and by the MICIIN under the Research Project AYA2012-39832-C02-01/02 (Space Programme).