Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Thermoelectric performance boost by chemical order in epitaxial L21 (100) and (110) oriented undoped Fe2VAl thin films: an experimental and theoretical study [Dataset]

  • Domínguez-Vázquez, José María
  • Caballero-Calero, Olga
  • Lohani, Ketan
  • Plata, José J.
  • Marquez, Antonio M.
  • Manzano, Cristina V.
  • Tenaguillo Arrese, Miguel Ángel
  • Ohta, Hiromichi
  • Cebollada, Alfonso
  • Conca, André
  • Martín-González, Marisol
According to the open access nature and its exceptions in the datasets regulation of the Call ERC-2021-ADG, and having reflected the following statements in the Data Management Plan of such project (ID: 101052603; POWERbyU; ERC-2021-ADG), the authors of the data associated with this publication state the following: The datasets associated with this publication will be available upon request, due to these datasets being subjected to Intellectual Property Restrictions; requests by externals for the use of these datasets will be approved by the project coordinator. Please, contact Prof. Marisol Martín-González: marisol.martin@csic.es This modus operandi will remain in effect, at least until the end of the project., This Dataset refers to the following study which demonstrates the direct correlation between the presence of the L21 ordered phase and the significant enhancement in the thermoelectric performance of Fe2VAl thin films deposited on MgO and Al2O3 substrates at temperatures varying between room temperature and 950 °C. The researchers employ both experimental techniques and computational modeling to analyze the influence of crystallographic orientation and deposition temperature on the thermoelectric properties, including the Seebeck coefficient, electrical conductivity, and thermal conductivity. Their findings indicate that the presence of the L21 phase significantly enhances the power factor (PF) and figure of merit (zT), surpassing previously reported values for both bulk and thin film forms of Fe2VAl, achieving a PF of 480 μW m−1 K−2 and a zT of 0.025., The authors would also like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). This work was funded by projects THERMHEUS grant TED2021-131746B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and ERC Adv. POWERbyU grant agreements ID: 101052603 funded by European Research Council (ERC), and grant PID2022-138063OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. We gratefully acknowledge the computer resources at Lusitania (Cenits-COMPUTAEX), Red Española de Supercomputación, RES (QHS-2023-1-0028) and Albaicín (Centro de Servicios de Informática y Redes de Comunicaciones – CSIRC, Universidad de Granada)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Template‐Assisted 3D‐PVDF Nanonetworks for Passive Daytime Radiative Cooling [Dataset]

  • Iglesias-Elcano, Amaia
  • Moreno-Sanabria, Luis
  • Martín-González, Marisol
  • Manzano, Cristina V.
Passive daytime radiative cooling (PDRC), which dissipates heat through infrared emission to outer space while reflecting solar radiation, represents a promising strategy for reducing energy consumption in cooling technologies. This Dataset is from the study in which we introduced a template-assisted strategy to fabricate nanostructured polyvinylidene fluoride (PVDF) radiative coolers via polymer infiltration into three-dimensional anodic aluminum oxide (3D-AAO) nanoporous templates. The optical properties and cooling performance of the 3D-PVDF nanostructures are investigated with and without the AAO template. To tune the crystalline phase composition and its influence on optical response, three post-infiltration cooling methods—natural, fast, and ultra-fast—are applied. A UV treatment further enhances solar reflectance through photo-oxidation-induced whitening. The optimized free-standing 3D-PVDF obtained via ultra-fast cooling exhibits an average solar reflectance of 82.4% (0.32–2.5 μm) and an infrared emissivity of 96.7% within the 8–13 μm atmospheric window. These properties correspond to a theoretical daytime cooling power density of 182.3 W m−2 under a solar irradiance of 1000 W m−2. Outdoor measurements demonstrate a daytime temperature reduction of 12.9°C under peak solar irradiance of 962 W m−2 relative to an empty reference box. This work establishes a scalable strategy for engineering three-dimensional polymer nanostructures for high-performance radiative cooling and energy-efficient building technologies., We acknowledge financial support from “ERC Consolidator Grant No. 101087974 COOLed”. We acknowledge the service from the MiNa Laboratory at IMN and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supplementary Material Sustainable thermoelectric materials based on metallic alloys and intermetallic compounds [Dataset]

  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Martín-González, Marisol
Additional tables (SI and SII) and alternative text descriptions, This review provides an overview of recent advances in metallic and intermetallic alloys, which have emerged as promising alternatives to traditional semiconductor thermoelectrics for power generation and active solid-state cooling. Driven by the abundance, low toxicity, mechanical robustness, and manufacturability of these materials, we examine current trends in metallic (e.g., Cu–Ni, Ni–Fe, Ni–Au) and intermetallic (Heuslers, skutterudites, Zintl phases, silicon-rich silicides, clathrates, stannides, etc.) families to gain insight into the physical basis of their performance and to inform future developments. Unlike the traditional focus on high-zT semiconductors, we highlight the importance of high-power factor (PF = σ·S2) in these materials for achieving compelling device-level performance, particularly for Peltier cooling under realistic thermal-resistance constraints. We also discuss phonon-engineering strategies to reduce lattice thermal conductivity while preserving electrical transport. The review concludes by exploring opportunities in thin films and microfabrication to unlock nanostructured architectures, conformal modules, and material-efficient devices. While some of the systems discussed (e.g., Ni–Au or Hf-rich half-Heuslers) are not intrinsically sustainable in terms of elemental abundance or cost, they are included to illustrate key physical mechanisms that can be translated to more sustainable material platforms., The authors would like to acknowledge financial support from “ERC Advanced Grant No. 01052602 PowerbyU.” We acknowledge the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033, and Next Generation EU/PRTR (Grant No. EQC2021-006944-P)., Peer reviewed