Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

A One-Step Novel Method to Fabricate Multigrade Ti6Al4V/TiN Composites Using Laser Powder Bed Fusion

  • SANCHEZ DE ROJAS CANDELA, CARMEN
  • Riquelme, A.
  • Rodrigo Herrero, Pilar
  • Bonache, Victoria
  • Bedmar Sanz, Javier
  • Torres, B.
  • Rams, Joaquin
We proposed a novel methodology to fabricate in one step a multigrade titanium matrix composite reinforced with in situ TiN and a proof-of-concept hip implant by incorporating nitrogen during the L-PBF (Laser powder bed fusion) process.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Effect of post-processing heat treatments on the high-temperature oxidation of additively manufactured 316L stainless steel

  • García Rodríguez, Sonia
  • Bedmar Sanz, Javier
  • ABU-WARDA, Najib
  • Torres, B.
  • Rams, Joaquin
We present the study of the influence of different heat treatment in the high-temperature oxidation of the 316 L stainless Steel made by LPBF.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Wear behavior of additively manufactured 316L/SiCp composites with up to 60 wt% SiCp

  • SANCHEZ DE ROJAS CANDELA, CARMEN
  • Riquelme Aguado, Ainhoa
  • Rodrigo Herrero, Pilar
  • Torres, B.
  • Rams, Joaquin
We studied the wear behavior of DED additively manufatured 316L/SiC composites reinforced with 20-80 wt.% of SiC ceramic particles and compared with 316L stainless Steel. The microstructure and microhardness of the samples were studied, and the friction coefficient, pin and disc mass loss, and wear rate have been correlated with them
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Synergization of LPBF shell‑infll lattice structures: experimental and modelling

  • Garcia Zapata, Juan Manuel
  • Torres, B.
  • Rams, Joaquin
This study aims to analyse the synergization between the shell and the lattice structure through compression testing and fnite element modelling (FEM), evaluating how diferent shell thicknesses and strut sizes contribute to the mechanical response of the integrated structures. Shell contribution was compared with that of the strut to examine where the added volume is more efective for resisting compressive loads. The results proved that thinner lattices with thicker shells were more efcient for resisting compression loads, doubling its resistance for the same volume fraction. In addition, the load application direction with respect to the lattice free surface has also been reported to infuence the mechanical response of the integrated structures. The results experimentally obtained agree with those obtained by FEM proving that the solid body model used is accurate enough to reproduce the mechanical response of the integrated structures.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

A Review of Additive Manufacturing of Biodegradable Fe and Zn Alloys for Medical Implants Using Laser Powder Bed Fusion (LPBF)

  • Limón Velo, Irene
  • Bedmar Sanz, Javier
  • Fernández Hernán, Juan Pablo
  • Multigner, Marta
  • Belén Torres Barreiro
  • Joaquín Rams
  • CIFUENTES CUELLAR, SANDRA CAROLINA
This review explores the advancements in additive manufacturing (AM) of biodegradable iron (Fe) and zinc (Zn) alloys, focusing on their potential for medical implants, particularly in vascular and bone applications. This review focuses on the advancements in AM, with a particular emphasis on LPBF for processing Fe and Zn biodegradable alloys. It explores how LPBF can optimize the microstructure, mechanical performance, and corrosion behavior of these materials to meet clinical requirements. The review also examines the biocompatibility of Fe and Zn alloys in both in vitro and in vivo settings, aiming to advance their development as next-generation bioresorbable implants for medical applications. Methodology: Review of the advancements in additive manufacturing (AM) of biodegradable iron (Fe) and zinc (Zn) alloys
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Effects of building direction, process parameters and border scanning on the mechanical properties of Laser Powder Bed Fusion AlSi10Mg

  • Garcia Zapata, Juan Manuel
  • Torres, B.
  • Rams, Joaquin
In this study we present the analysis of the effect of building direction, process parameters and border scanning on the mechanical properties of LPBF manufactured AlSi10Mg alloy through hardness, tensile, shear and fracture testing.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Influence of the surface state on the corrosion behavior of the 316 L stainless steel manufactured by laser powder bed fusion

  • García Rodríguez, Sonia
  • Bedmar Sanz, Javier
  • ABU-WARDA, Najib
  • Torres, B.
  • Rams, Joaquin
We present the study of the corrosion behavior and the comparison of 316L stainless Steel manufactured by LPBF as-built and grounded.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Impact of molten salts composition on the corrosion behavior of NiMoCr and CoNiCrAl coatings on L-PBF 316L stainless steel for CSP plants

  • García Rodríguez, Sonia
  • Bedmar Sanz, Javier
  • ABU-WARDA, Najib
  • Torres, B.
  • Rams, Joaquin
  • UTRILLA, M.V.
We present the study of the influence of different coatings made by HVOF in 316 L stainless Steel manufactured by LPBF on the corrosión behavior.