Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Study of the effect of magnetic fields on static degradation of Fe and Fe-12Mn-1.2C in balanced salts modified Hanks’ solution

  • Limón, Irene
  • Multigner, Marta
  • Paternoster, Carlo
  • Lieblich, Marcela
  • Torres, Belén
  • Mantovani, Diego
  • Rams, Joaquín
Iron and its alloys are attractive as biodegradable materials because of their low toxicity and suitable mechanical properties; however, they generally have a slow degradation rate. Given that corrosion is an electrochemical phenomenon where an exchange of electrons takes place, the application of magnetic fields from outside the body may accelerate the degradation of a ferrous temporary implant. In the present study, we have investigated the effect of alternating and direct low magnetic field (H = 6.5 kA/m) on the corrosion process of pure iron (Fe) and an iron-manganese alloy (FeMnC) in modified Hanks' solution. A 14-day static immersion test was performed on the materials. The corrosion rate was assessed by mass and cross-sectional loss measurements, scanning electron microscopy, X-ray diffractometry, Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy before and after degradation. The results show that the presence of magnetic fields significantly accelerates the degradation rate of both materials, with the corrosion rate being twice as high in the case of Fe and almost three times as high for FeMnC. In addition, a homogenous degradation layer is formed over the entire surface and the chemical composition of the degradation products is the same regardless of the presence of a magnetic field., Financial support of Ministry of Science and Innovation of Spain (MICINN) PID2021-123891OB-I00. PID2021-124341OB-C21 and PID2022-139323NB-I00 funded by MCIN/AEI/10.13039/ 501100011033. Rey Juan Carlos University, Móstoles (Madrid) Spain has funded the C1PREDOC2020 grant of Irene Limon. This work was partially supported by the Natural Science and Engineering Research Council of Canada, the Fonds de la Recherche du Québec sur les Natures et les Technologies, and the Canada Foundation for Innovation, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Past, Present, and Future of Fe-Mg Bioresorbable Alloys for Medical Applications

  • Estrada, Rafael Guillermo
  • Fagali, Natalia S.
  • Multigner, Marta
  • Lieblich, Marcela
The search for biocompatible and bioabsorbable metallic materials for temporary medical implants dates back to the late nineteenth century. Interest in these materials arises from their potential social and medical benefits. However, extensive research did not start until the early twentieth century, primarily focusing on magnesium (Mg), iron (Fe), and zinc (Zn) as biocompatible and biodegradable base metals. In this work, we explore the combination of two of these metals, Fe and Mg, and the opportunity to investigate Fe-Mg alloys as potential candidates for biomedical applications through a review of their development from their initial production to the present, as well as their future prospects. A distinctive characteristic of Fe-Mg systems is their mutual immiscibility in thermodynamic equilibrium, which poses significant processing challenges and explains why Fe-Mg alloys have been relatively unexplored. However, it is precisely this immiscibility that offers the opportunity to achieve a metastable state that potentiates degradation. As evidenced by the review of recent research on bioabsorbable Fe-Mg alloys developed specifically for biomedical applications, given their promising properties and potential applications, a more comprehensive exploration of this alloy system appears warranted., Grant PID2022-139323NB-I00, PRE2020-092118 (R.E.), PID2021-123891OB-I00 funded by MCIN/AEI/ https://doi.org/10.13039/501100011033, RTI2018-101506-B-C33 by MICIU/FEDER Spain. CONICET [PIP 2021 11220200100315CO]; ANPCyT [PICT 2019-00631, PICT-2020-02169, PICT Start Up 2020-0034]; and UNLP [Project 11/X900].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Past, Present, and Future of Fe-Mg Bioresorbable Alloys for Medical Applications

  • Estrada, Rafael Guillermo
  • Fagali, Natalia S.
  • Multigner, Marta
  • Lieblich, Marcela
The search for biocompatible and bioabsorbable metallic materials for temporary medical implants dates back to the late nineteenth century. Interest in these materials arises from their potential social and medical benefits. However, extensive research did not start until the early twentieth century, primarily focusing on magnesium (Mg), iron (Fe), and zinc (Zn) as biocompatible and biodegradable base metals. In this work, we explore the combination of two of these metals, Fe and Mg, and the opportunity to investigate Fe-Mg alloys as potential candidates for biomedical applications through a review of their development from their initial production to the present, as well as their future prospects. A distinctive characteristic of Fe-Mg systems is their mutual immiscibility in thermodynamic equilibrium, which poses significant processing challenges and explains why Fe-Mg alloys have been relatively unexplored. However, it is precisely this immiscibility that offers the opportunity to achieve a metastable state that potentiates degradation. As evidenced by the review of recent research on bioabsorbable Fe-Mg alloys developed specifically for biomedical applications, given their promising properties and potential applications, a more comprehensive exploration of this alloy system appears warranted., Grant PID2022-139323NB-I00, PRE2020-092118 (R.E.), PID2021-123891OB-I00 funded by MCIN/AEI/ https://doi.org/10.13039/501100011033, RTI2018-101506-B-C33 by MICIU/FEDER Spain. CONICET [PIP 2021 11220200100315CO]; ANPCyT [PICT 2019-00631, PICT-2020-02169, PICT Start Up 2020-0034]; and UNLP [Project 11/X900].
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

A One-Step Novel Method to Fabricate Multigrade Ti6Al4V/TiN Composites Using Laser Powder Bed Fusion

  • SANCHEZ DE ROJAS CANDELA, CARMEN
  • Riquelme, A.
  • Rodrigo Herrero, Pilar
  • Bonache, Victoria
  • Bedmar Sanz, Javier
  • Torres, B.
  • Rams, Joaquin
We proposed a novel methodology to fabricate in one step a multigrade titanium matrix composite reinforced with in situ TiN and a proof-of-concept hip implant by incorporating nitrogen during the L-PBF (Laser powder bed fusion) process.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Effect of post-processing heat treatments on the high-temperature oxidation of additively manufactured 316L stainless steel

  • García Rodríguez, Sonia
  • Bedmar Sanz, Javier
  • ABU-WARDA, Najib
  • Torres, B.
  • Rams, Joaquin
We present the study of the influence of different heat treatment in the high-temperature oxidation of the 316 L stainless Steel made by LPBF.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Wear behavior of additively manufactured 316L/SiCp composites with up to 60 wt% SiCp

  • SANCHEZ DE ROJAS CANDELA, CARMEN
  • Riquelme Aguado, Ainhoa
  • Rodrigo Herrero, Pilar
  • Torres, B.
  • Rams, Joaquin
We studied the wear behavior of DED additively manufatured 316L/SiC composites reinforced with 20-80 wt.% of SiC ceramic particles and compared with 316L stainless Steel. The microstructure and microhardness of the samples were studied, and the friction coefficient, pin and disc mass loss, and wear rate have been correlated with them
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Synergization of LPBF shell‑infll lattice structures: experimental and modelling

  • Garcia Zapata, Juan Manuel
  • Torres, B.
  • Rams, Joaquin
This study aims to analyse the synergization between the shell and the lattice structure through compression testing and fnite element modelling (FEM), evaluating how diferent shell thicknesses and strut sizes contribute to the mechanical response of the integrated structures. Shell contribution was compared with that of the strut to examine where the added volume is more efective for resisting compressive loads. The results proved that thinner lattices with thicker shells were more efcient for resisting compression loads, doubling its resistance for the same volume fraction. In addition, the load application direction with respect to the lattice free surface has also been reported to infuence the mechanical response of the integrated structures. The results experimentally obtained agree with those obtained by FEM proving that the solid body model used is accurate enough to reproduce the mechanical response of the integrated structures.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

A Review of Additive Manufacturing of Biodegradable Fe and Zn Alloys for Medical Implants Using Laser Powder Bed Fusion (LPBF)

  • Limón Velo, Irene
  • Bedmar Sanz, Javier
  • Fernández Hernán, Juan Pablo
  • Multigner, Marta
  • Belén Torres Barreiro
  • Joaquín Rams
  • CIFUENTES CUELLAR, SANDRA CAROLINA
This review explores the advancements in additive manufacturing (AM) of biodegradable iron (Fe) and zinc (Zn) alloys, focusing on their potential for medical implants, particularly in vascular and bone applications. This review focuses on the advancements in AM, with a particular emphasis on LPBF for processing Fe and Zn biodegradable alloys. It explores how LPBF can optimize the microstructure, mechanical performance, and corrosion behavior of these materials to meet clinical requirements. The review also examines the biocompatibility of Fe and Zn alloys in both in vitro and in vivo settings, aiming to advance their development as next-generation bioresorbable implants for medical applications. Methodology: Review of the advancements in additive manufacturing (AM) of biodegradable iron (Fe) and zinc (Zn) alloys
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Effects of building direction, process parameters and border scanning on the mechanical properties of Laser Powder Bed Fusion AlSi10Mg

  • Garcia Zapata, Juan Manuel
  • Torres, B.
  • Rams, Joaquin
In this study we present the analysis of the effect of building direction, process parameters and border scanning on the mechanical properties of LPBF manufactured AlSi10Mg alloy through hardness, tensile, shear and fracture testing.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Influence of the surface state on the corrosion behavior of the 316 L stainless steel manufactured by laser powder bed fusion

  • García Rodríguez, Sonia
  • Bedmar Sanz, Javier
  • ABU-WARDA, Najib
  • Torres, B.
  • Rams, Joaquin
We present the study of the corrosion behavior and the comparison of 316L stainless Steel manufactured by LPBF as-built and grounded.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Impact of molten salts composition on the corrosion behavior of NiMoCr and CoNiCrAl coatings on L-PBF 316L stainless steel for CSP plants

  • García Rodríguez, Sonia
  • Bedmar Sanz, Javier
  • ABU-WARDA, Najib
  • Torres, B.
  • Rams, Joaquin
  • UTRILLA, M.V.
We present the study of the influence of different coatings made by HVOF in 316 L stainless Steel manufactured by LPBF on the corrosión behavior.