Skip to main content

INFLUENCIA DE LOS TRATAMIENTOS SELVICOLAS DE CLARAS EN LA PRODUCCION, ESTABILIDAD MECANICA Y RIESGO DE INCENDIOS FORESTALES EN MASAS DE PINUS RADIATA D. DON Y PINUS PINASTER AIT. EN EL NOROESTE DE ESP

AGL2008-02259

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2008
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD DE LEÓN

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Influencia de variables dendrométricas y de estación en el grado de daños por "Rhyacionia buoliana" en masas de "Pinus radiata"

  • Román Devesa, Almudena
  • Castedo Dorado, Fernando
  • Lombardero Díaz, María Josefa
[ES] En el presente trabajo se determinó si el grado de afectación de los árboles por "Rhyacionia buoliana" en pies de "Pinus radiata" está influenciado por la calidad de la estación, y se estableció el tipo de brote más apetecible por el insecto en cuanto a diámetro y a longitud. Para ello se llevó a cabo un inventario de los daños causados por "R. buoliana" en seis parcelas de cinco años de edad con calidades de estación diferenciadas (tres de buena calidad y tres de mala calidad) en masas de "P. radiata" de la comarca de El Bierzo (Léon). En cada parcela se estudiaron 100 árboles en los que se analizó si alguno de sus ramillos o la guía terminal se encontraban dañados. Asimismo, en cada parcela se localizaron 15 árboles no atacados y otros 15 atacados. En estos últimos se escogieron aleatoriamente cuatro brotes (dos atacados y dos no atacados) situados en los dos verticilos terminales, en los que se midió su diámetro y su longitud. Los resultados mostraron que calidad de estación no es relevante en el nivel de daños. Asimismo, se comprobó que el diámetro de los brotes atacados es mayor y significativamente distinto al de los brotes no atacados, hecho que parece estar relacionado con la mayor disponibilidad de espacio para la alimentación y crecimiento de las larvas. Sin embargo, la longitud de los ramillos no tuvo influencia en el nivel de daños. En más de la mitad de los árboles muestreados existían daños en la guía terminal, que es el más importante desde el punto de vista económico, ya que produce deformaciones permanentes en el fuste, SI, Este trabajo fue financiado por el Ministerio de Ciencia e Innovación (MICINN) a través del proyecto de investigación AGL2008-02259/FOR
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Modelización de variables de copa de importancia en incendios forestales para "Pinus Radiata" D. Don en el noroeste de España

  • Gómez Vázquez, I.
  • Crecente Campo, Felipe
  • Diéguez Aranda, Ulises
  • Castedo Dorado, Fernando
[ES] En este trabajo se presenta el rango de variación de la densidad aparente de la cubierta de copas (CBD) y de la altura de la base de la cubierta de copas (CBH) para masas de "Pinus radiata" con necesidad de clara en el noroeste de España. Para ello se realizó un muestreo destructivo de 106 árboles que permitió modelizar el perfil vertical de combustible disponible. El modelo obtenido fue aplicado a 412 inventarios de parcelas permanentes de la especie con índice de Hart inferior a 0,20. Los resultados mostraron que las masas estudiadas se caracterizan por una baja CBH, lo que se traduce en una elevada probabilidad de transición del fuego de superficie a las copas, y por valores reducidos de CBD, lo que implica una limitada capacidad de propagación del fuego por los combustibles aéreos. Estos resultados difieren significativamente de los obtenidos por otros autores para la especie en Galicia. Las discrepancias pueden ser debidas a las diferentes metodologías utilizadas par ala distribución vertical del combustible disponible y a las diferentes características de las parcelas empleadas. Estas variables representativas de las características del combustible aéreo fueron modelizadas satisfactoriamente a partir de variables de rodal, lo que permite una determinación precisa de las mismas bajo un esfuerzo de muestreo. Los modelos desarrollados posibilitan simular diferentes alternativas selvícolas teniendo en cuenta el riesgo de inicio y propagación de incendios de copa, por lo que resultan herramientas útiles para la toma de decisiones en prevención de incendios forestales, SI, Este trabajo fue financiado por el Ministerio de Ciencia e Innovación (MICINN) a través del proyecto de investigación AGL2008-02259/FOR
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Delimiting the spatio-temporal uncertainty of climate-sensitive forest productivity projections using Support Vector Regression

  • González Rodríguez, Miguel Ángel
  • Diéguez Aranda, Ulises
As climate change makes many traditional empirical growth approaches not functional for forest dynamics modelling, new climate-sensitive models are needed. However, using these newly developed models for extrapolation, such as predicting forest productivity for new areas or future scenarios is still a difficult task. In this study, we proposed a method for delimiting the uncertainty of climate-sensitive extrapolations of forest productivity (site index, ) using the regularisation approach implicit in distance-based Support Vector Regression. As a case study, we predicted forest productivity with a dataset of 165 permanent research plots of radiata pine forests in Galicia (NW of Spain) as a function of bioclimatic variables from the Worldclim 2 raster datasets. The developed model was based on the radial basis kernel and, after calibrating it using cross-validation, produced adequate performance metrics, explaining up to 56% of the site index’ variability. Then, we predicted forest productivity for the Galician territory basing on climate raster maps for current conditions and six future scenarios (using different Global Climate Models) and evaluated the resulting maps by delimiting the surfaces with predictions strongly regressed to the mean. This analysis revealed that the extrapolations for unseen climatic conditions were extremely regularised, even for current climate, being 60–99% of the territory regressed to the observational site index mean. In other words, the validity area delimited for the fitted model was narrow in comparison with the prediction extent. These results imply that the climatic conditions in these areas/scenarios were too different from the training datastet for making reliable predictions, at least under the optimum model setup defined by cross-validation. However, when we reduced the parameter, responsible for controlling distance-based regularisation, we observed a noticeable increase in validity area of the model, together with a drop in performance. This fact revealed the existence of a trade–off between highly specific models, with high performance and a small applicability area, and more generalisable models, with a broad validity area but lower performance. We concluded that the tested methodology could be a useful starting point for assessing the spatio-temporal uncertainty of forest productivity predictions in the future
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Modeling extreme values for height distributions in Pinus pinaster, Pinus radiata and Eucalyptus globulus stands in northwestern Spain

  • Gorgoso Varela, José Javier
  • García Villabrille, Juan Daniel
  • Rojo Alboreca, Alberto
Methods of estimating extreme height values can be used in forest modeling to improve fits to the marginal distribution of heights in the following bivariate diameter-height models: the SBB Johnson’s distribution, the bivariate beta (GDB-2) distribution, the bivariate Logit-Logistic (LL-2) distribution and the power-normal (PN) distribution. Some applications to LiDAR derived data are also possible, e.g., for error calibration. Practical applications in forest management may also be considered, e.g., for pruning. In probability theory and statistics, the generalized extreme value (GEV) distribution, also known as the Fisher-Tippett distribution, is a family of continuous probability distributions that combine the Gumbel, Fréchet and Weibull distributions. This study compared the three distributions for fitting extreme values of tree heights (maximum and minimum heights), which were measured in 185 permanent research plots in Pinus pinaster Ait. stands, 97 research plots in Pinus radiata D. Don stands, and 128 research plots in Eucalyptus globulus Labill. Most of the eucalyptus stands were measured three times giving a total of 304 measurements. All plots are located in northwestern Spain. The Bias, Mean Absolute Error (MAE) and Mean Square Error (MSE) of the mean relative frequency of trees were used to evaluate the goodness-of-fit of the different functions, as well as the Kolmogorov-Smirnov statistic Dn. The Gumbel and the Weibull cumulative distribution functions (CDFs) proved suitable for describing extreme values of height distributions of the above-mentioned tree species in northwestern Spain. The Fréchet distribution was only used to model maximum values and yielded the poorest results in all cases.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Estimación de las existencias maderables de Pinus radiata a escala provincial utilizando datos LiDAR de baja resolución, Estimation of timber stocks of Pinus radiata stands at the provincial scale using low resolution LiDAR data

  • Martín García, Saray
  • Diéguez Aranda, Ulises
  • Álvarez González, Juan Gabriel
  • Pérez Cruzado, César
  • Buján Seoane, Sandra
  • González Ferreiro, Eduardo
[ESP] Se estimó el volumen de madera de rodal (V, m3 ha-1) de Pinus radiata en la provincia de Lugo (NO España) a partir de métricasde datos LiDAR de baja resolución del PNOA (Plan Nacional de Ortofotografía de España). La estimación se basó en un diseño de muestreo orientado para mejorar el ajuste del modelo y en un método inferencial basado en la variabilidad de la estimación de los parámetros del modelo y en la variabilidad de la variable LiDAR en la población objetivo, lo que permitió estimar la media poblacional y el error en la estimación de V. Se usaron 25 parcelas permanentes, que cubren el rango existente de calidad, edad y densidad en los rodales de la especie en la provincia y se ajustaron modelos lineales y potenciales. El mejor resultado se obtuvo con un modelo potencial entre V y el percentil 70 de la altura normalizada (h70) (R2 = 0,899; REMC = 63,4 m3 ha-1 ). Dicho modelo se aplicó a todas las teselas de P. radiata de la provincia de Lugo con estados de desarrollo de latizal y fustal y con ocupación de la especie superior al 60 % según el Mapa Forestal de España. Luego, se elaboró un mapa espacialmente explícito que describe V a escala provincial. En 2009 la media poblacional estimada para V fue de 166,3 m3 ha-1 , con un error relativo de muestreo del 13,9 %. Esta metodología permitirá generar mapas temáticos cada seis años (periodicidad programada para los vuelos LiDAR del PNOA).
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Fitting and calibrating a multilevel mixed-effects stem taper model for maritime pine in NW Spain

  • Arias Rodil, Manuel
  • Castedo Dorado, Fernando
  • Cámara Obregón, Asunción
  • Diéguez Aranda, Ulises
Stem taper data are usually hierarchical (several measurements per tree, and several trees per plot), making application of a multilevel mixed-effects modelling approach essential. However, correlation between trees in the same plot/stand has often been ignored in previous studies. Fitting and calibration of a variable-exponent stem taper function were conducted using data from 420 trees felled in even-aged maritime pine (Pinus pinaster Ait.) stands in NW Spain. In the fitting step, the tree level explained much more variability than the plot level, and therefore calibration at plot level was omitted. Several stem heights were evaluated for measurement of the additional diameter needed for calibration at tree level. Calibration with an additional diameter measured at between 40 and 60% of total tree height showed the greatest improvement in volume and diameter predictions. If additional diameter measurement is not available, the fixed-effects model fitted by the ordinary least squares technique should be used. Finally, we also evaluated how the expansion of parameters with random effects affects the stem taper prediction, as we consider this a key question when applying the mixed-effects modelling approach to taper equations. The results showed that correlation between random effects should be taken into account when assessing the influence of random effects in stem taper prediction
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of direct and indirect methods for modelling the joint distribution of tree diameter and height data with the bivariate Johnson’s SBB function to forest stands

  • Gorgoso-Varela, José Javier
  • Ogana, Friday N.
  • Alonso Ponce, R.
10 Pág., Aim of study: In this study, both the direct and indirect methods by conditional maximum likelihood (CML) and moments for fitting Johnson’s SBB were evaluated. To date, Johnson’s SBB has been fitted by either indirect (two-stage) method using well-known procedures for the marginal diameter and heights, or direct methods, where all parameters are estimated at once. Application of bivariate Johnson’s SBB for predicting height and improving volume estimation requires a suitable fitting method. Area of study: E. globulus, P. pinaster and P. radiata stands in northwest Spain. Material and methods: The data set comprised of 308, 184 and 96 permanent sample plots (PSPs) from the aforementioned species. The suitability of the method was evaluated based on height and volume prediction. Indices including coefficient of determination (R2), root mean square Error (RMSE), model efficiency (MEF), Bayesian Information Criterion (BIC) and Hannan-Quinn Criterion (HQC) were used to assess the model predictions. Significant difference between observed and predicted tree height and volumes were tested using paired sample t-test at 5% level for each plot by species. Main results: The indirect method by CML was the most suitable method for height and volume prediction in the three species. The R2 and RMSE for height prediction ranged from 0.994 – 0.820 and 1.454 – 1.676, respectively. The percentage of plot in which the observed and predicted heights were significant was 0.32%. The direct method was the least performed method especially for height prediction in E. globulus. Research highlights: The indirect (two-stage) method, especially by conditional maximum likelihood, was the most suitable method for the bivariate Johnson’s SBB distribution., This work was supported by the Government of Spain, Department of Economy, Industry and Competitiveness under the Torres Quevedo Contract PTQ-16-08445. The study also was financially supported by the Gobierno del Principado de Asturias through the project entitled “Estudio del crecimiento y producción de Pinus pinaster Ait. en Asturias” (CN-07-094); by the Ministerio de Ciencia e Innovación through the project entitled “Influencia de los tratamientos selvícolas de claras en la producción, estabilidad mecánica y riesgo de incendios forestales en masas de Pinus radiata D. Don y Pinus pinaster Ait. en el Noroeste de España” (AGL2008-02259), and an ongoing research project entitled “Growth and yield modelling of clonal and seedling plantations of Eucalyptus globulus Labill. of NW Spain” (code AGL2010-22308-C02-01), funded by the Ministry of Science and Innovation of Spain and the European Union through the ERDF programme for the period 2011-2013., Peer reviewed