Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Plataforma de inspección para la obtención de mapas 2D y 3D de un cultivo

  • Bengochea-Guevara, José M.
  • Andújar, Dionisio
  • Conesa-Muñoz, Jesús
  • Ribeiro, Ángela
[Resumen] El concepto de Gestión Integrada de Plagas (GIP) ha surgido en los últimos años con el fin de lograr un manejo sostenible de los cultivos reduciendo, entre otras cosas, la cantidad de agroquímicos empleados y con ello el impacto medioambiental. Un elemento clave es la monitorización o inspección continua de los cultivos para asegurar la detección temprana de plagas. En este artículo se presenta una plataforma móvil terrestre capaz de inspeccionar dos tipos de escenarios: los cultivos anuales (maíz, cereales, etc) y los cultivos plurianuales (árboles frutales, viñedos, etc)., Este trabajo está siendo financiado en su totalidad por el proyecto del Plan Estatal “Integración de información multisensorial y aprendizaje automático para la detección, caracterización y reconocimiento preciso de estructuras naturales en campos de cultivo” (AGL2014-52465-C4-3-R), https://doi.org/10.17979/spudc.9788497498081
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Predictive phytotoxic value of water-soluble allelochemicals in plant extracts for choosing a cover crop or mulch for specific weed control

  • Puig, Carolina G.
  • Valencia-Gredilla, Francisco
  • Pardo-Muras, María
  • Souto, X. Carlos
  • Recasens i Guinjuan, Jordi
  • Pedrol, Nuria
Cover crops and mulches have become an alternative for soil management in vineyards due to the agronomic, environmental, and economic advantages, especially the possibility of weed control. Implicitly to this objective lies the idea of assessing the potential herbicide effect of the allelochemicals released by different cover crops and mulch species. With this objective, the present work evaluated the phytotoxic effects of 12 aqueous extracts of selected species with potential use as a cover crop or mulch: a Bromus species mixture (B. hordeaceus L. and B. rubens L.), Festuca arundinacea Schreb., Hordeum murinum L., H. vulgare L., Vulpia ciliata Dumort., Medicago rugosa Desr., M. sativa L., Trifolium subterraneum L., T. incarnatum L., Phacelia tanacetifolia Benth., Sinapis alba L., and Pinus sylvestris L., on the germination and early growth of three troublesome weeds (Conyza bonariensis (L.) Cronquist, Aster squamatus (Spreng.) Hieron, and Bassia scoparia (L.) A. J.). The different in vitro bioassays showed that aqueous extracts of some species significantly inhibited or reduced germination and root and shoot growth of the target weed species in a dose-response manner. Germination of A. squamatus and C. bonariensis was reduced by 100-80% by the different extracts applied at 50% concentration and completely blocked at 100% concentration, except for M. rugosa extract, to which both species showed less sensitivity. Root elongation of A. squamatus was inhibited under every extract and concentration, whereas C. bonariensis root growth showed only some tolerance to the crude extracts of F. arundinacea and P. sylvestris. Bassia scoparia was relatively tolerant to the aqueous plant extracts, except for T. subterraneum crude extract, which reduced total germination by 80%; otherwise, B. scoparia showed higher general sensitivity of shoot growth than the other two weed species. The chemical profiles of phenolic compounds of the aqueous extracts were obtained and identified by HPLC-DAD, the phenolic profiles of H. murinum, V. ciliata, and M. rugosa being reported in this work for the first time. Using stepwise regression, the influence of certain phenolic compounds from the aqueous extracts on the germination and early growth of weeds was predicted. Among other significant compounds, the flavonoid naringenin identified in T. subterraneum aqueous extract at 8.09 μg·mL-1 was predicted to underlie its specific phytotoxicity on B. scoparia germination. These results support the use of cover crops and mulches in weed management and can help to select the most suitable species to adopt according to the target weed species.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Efficiency, profitability and carbon footprint of different management programs under no-till to control herbicide resistant Papaver rhoeas

  • Recasens i Guinjuan, Jordi
  • Royo-Esnal, Aritz
  • Valencia-Gredilla, Francisco
  • Torra Farré, Joel
The present work examines the effects of different integrated weed management (IWM) programs on multiple herbicide-resistant Papaver rhoeas populations in terms of effectiveness, profitability and carbon footprint. With this aim a trial was established in a winter cereal field under no-till in North-Eastern Spain during three consecutive seasons. Four IWM programs with different intensification levels, from less (crop rotation, mechanical control, and no herbicides) to more intense (wheat monoculture with high chemical inputs), were established. The different strategies integrated in the four programs were efficient in managing the weed after three years, with increased effectiveness after management program intensification. Whereas low input program (which includes fallow season) represented less economic cost than the other programs, on average, no differences were observed on carbon foot print, considered as kg CO2eq kg−1 product, between the different programs, except in the crop rotation program due to the low pea yield obtained. The results from this study show that in the search for a balance between crop profitability and reduction of the carbon footprint while controlling an herbicide resistant population is challenging, and particularly under notill. In this scenario the short term priority should be to reduce the presence of multiple herbicide resistant biotypes integrating the different available chemical, cultural, and physical strategies., This work has been supported by the Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF) with project AGL2014-52465-C4-2-R. Dr. J. Torra obtained a Ramon y Cajal contract from the Spanish Ministry of Science, Innovation and Universities (RYC2018-023866-I). Mr. F. Valencia-Gredilla obtained a PhD grant from the University of Lleida.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Germination behaviour of Conyza bonariensis to constant and alternating temperatures across different populations

  • Valencia-Gredilla, Francisco
  • Supiciche, María L.
  • Chantre, Guillermo R.
  • Recasens i Guinjuan, Jordi
  • Royo-Esnal, Aritz
Conyza bonariensis is one of the most problematic weed species throughout the world. It is considered highly noxious due to its interference with human activities, and especially the competition it poses with economically important crops. This research investigated the temperature requirements for seed germination of four populations of C. bonariensis with distinct origin and the influence of daily alternating temperatures. For this, a set of germination tests were performed in growth chambers to explore the effect of constant and alternating temperatures. Seeds of the four populations (from Lleida, Badajoz and Seville, Spain and Bahía Blanca, Argentina) were maintained at constant temperatures ranging from 5 to 35°C. The final germination and cardinal temperatures (base, optimum and maximum) of each population were obtained. We also tested the influence of daily alternating temperatures on final germination. To do so, seeds were exposed to two temperature regimes: 5/15, 10/20, 15/25, 20/30 and 25/35°C night/day temperature (intervals increasing 5°C, with constant oscillation of 10°C) and to 18/22, 16/24, 14/26, 12/28 and 10/30°C night/day temperature (intervals with average of 20°C, but increasing the oscillation in 4°C between intervals). In general, all populations behaved similarly, with the highest germination percentages occurring in the optimum temperature range (between 21.7°C and 22.3°C) for both constant and alternating temperatures. In general, climatic origin affected germination response, where seeds obtained from the coldest origin exhibited the highest germination percentage at the lowest temperature assayed. In addition, we observed that the alternating temperatures can positively affect total germination, especially in oscillations that were further from the average optimum temperature (20°C), with high germination percentage for the oscillations of 15/25, 20/30, 18/22, 16/24, 14/26, 12/28 and 10/30°C in all populations. The cardinal temperatures obtained were significantly different across the populations. These results provide information that will facilitate a better understanding of the behaviour of Conyza and improve current field emergence models., Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF), Grant/Award Numbers: AGL2017‐83325‐C4‐2‐R, AGL 2014‐52465‐C4‐2‐R
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Rigput brome (Bromus diandrus Roth.) management in a no tilled field in Spain

  • Royo-Esnal, Aritz
  • Recasens i Guinjuan, Jordi
  • Garrido, Jesús
  • Torra Farré, Joel
The adoption of no-till (NT) in the semi-arid region of Mediterranean Spain has promoted a weed vegetation change, where rigput brome (Bromus diandrus Roth) represents a main concern. In order to avoid complete reliance on herbicides, the combination of several control methods, without excluding chemical ones, can contribute to an integrated weed management (IWM) system for this species. In this field study, 12 three-year management programs were chosen, in which alternative non-chemical methods¿delay of sowing, crop rotation, sowing density and pattern, stubble removal¿are combined with chemical methods to manage B. diandrus in winter cereals under NT. Moreover, their effects on weed control and crop productivity were analyzed from the point of view of the efficiency of the control methods, based on a previously developed emergence model for B. diandrus. All management programs were effective in reducing the weed infestation, despite the different initial weed density between blocks. For high weed density levels (60-500 plants m􀀀2), two years of specific managements resulted in 99% reduction of its population. For even higher density levels, three years were needed to assure this reduction level. Both the emergence of the weed and the crop yields are mainly driven by the seasonal climatic conditions in this semi-arid area. For this reason, among the non-chemical methods, only crop rotation and sowing delay contributed to an effective weed population decrease as well as an increase in the economic income of the yield. The other alternative methods did not significantly contribute to controlling the weed. This work demonstrates that mid-term management programs combining chemical with non-chemical methods can effectively keep B. diandrus under control with economic gains compared to traditional field management methods in semi-arid regions., This research was funded by Bayer CropScience, grant number C14045, and the Economy Ministry of Spain, grant number AGL2014-52465-C4-2-R.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

A LiDAR-Based System to Assess Poplar Biomass

  • Andújar, Dionisio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rueda-Ayala, Victor
  • Fernandez Quintanilla, C.
  • Ribeiro, Angela
  • Dorado, José
This study evaluated the capabilities of a LiDAR-based system to characterize poplar trees for biomass production. The precision of the system was assessed by analyzing the relationship between the distance records and biophysical parameters. The terrestrial laser scanner (TLS) system consisted of a 2D time-of-flight LiDAR sensor, a gimbal to dynamically stabilize the sensor and a RTK-GPS to georeference its location and, subsequently, the sensor data. The sensor and its stabilizer were fixed facing downwards, on a metal frame designed for this purpose. Then, it was mounted on an all-terrain vehicle to perform 2D scans in planes perpendicular to the travel direction. Distances between the sensor and the surrounding objects had a high spatial resolution, providing high density 3D point clouds. Results on the reliability of the LiDAR system to estimate plant height showed a significant relationship between the sensor readings and actual poplar height and biomass data. In addition, tree biomass and tree volume were properly estimated in the point cloud. Regression analysis showed significant estimates of 0.79 and 0.89 for biomass and volume, respectively. These results reveal the potential of the LiDAR sensor to estimate both, plant height and plant biomass. This sensor's capability, added to its relative low cost, fast reaction, and the high number of readings per second consolidate the ideal system for estimating the productivity of biomass in energy crops. http://link.springer.com/article/10.1007%2Fs10343-016-0369-1, This research was funded by the CICyT (Commision Interministerial de Ciencia y Tecnología, Spain), under Agreement No. AGL2011-25243 and AGL2014-52465-C4.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Dynamics of Cynodon dactylon and weed community composition in different cover crops in a vineyard

  • Recasens i Guinjuan, Jordi
  • Valencia-Gredilla, Francisco
  • Cabrera-Pérez, Carlos
  • Baraibar Padró, Bàrbara
  • Royo-Esnal, Aritz
The implementation of cover crops in vineyards is an environment-friendly soil management technique that has several advantages, including weed suppression. The effectiveness of the management depends on the characteristics of both the weed community and the cover crop species. The objectives of this study were to evaluate the dynamics of Cynodon dactylon patches and the rest of the weed community composition under five different cover crops (four grasses and one dicotyledonous species) in a commercial vineyard in Spain: (1) the perennial Festuca arundinacea and the annual species (2) Hordeum vulgare, (3) Vulpia ciliata, (4) a mixture of Bromus species and (5) Medicago rugosa. The annual species were sown in November every year after tillage (from 2015 to 2018) and shredded in June, while F. arundinacea was sown in 2015 and shredded in June and in November every year. Results showed that cover crop species affected C. dactylon soil coverage and frequency across the field. After three seasons, F. arundinacea and H. vulgare were the best cover crops which controlled C. dactylon, resulting in the lowest weed coverage of 4.6% and 3.0% respectively. Although the expansion of the weed was restrained by cover crops, the soil tillage prior to sowing the annual species spreads the rhizomes and stolons to weed free areas of the field. Canonical Correspondence Analysis (CCA) showed that the weed community composition varied depending on the cover crop species, revealing the importance of its management in the weed assemblage., The authors thank the Company Raventós—Codorníu and Raimat winery for allowing and supporting field experiments, as well as Maria Casamitjana for her support with the field work. This work was funded by the Spanish Research Agency (AEI) from the Ministry of Sciences and Innovation (AGL2014‐52465‐C4‐2‐R, AGL2017‐83325‐C4‐2‐R and PID2020‐113229RB‐C4‐2) and also LISA (Low Input Sustainable Agriculture, ref. COMRDI16‐1‐0031‐0). FV and CC obtained a PhD grant from University of Lleida. BB received funding from the postdoctoral fellowships program Beatriu de Pinós (Government of Catalonia) and by the Horizon 2020 program of research and innovation of the EU under the Marie Sklodowska‐Curie grant agreement No. 801370.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Different Ground Vegetation Cover Management Systems to Manage Cynodon dactylon in an Irrigated Vineyard

  • Valencia-Gredilla, Francisco
  • Royo-Esnal, Aritz
  • Juárez Escario, Alejandro
  • Recasens i Guinjuan, Jordi
Ground cover management in vineyards in Spain is focused on minimizing soil erosion and compaction. Such practices have influenced the weed community structure in the inter-rows, contributing to the spread of the high noxious weed Cynodon dactylon (L.) Pers. This fact highlights the need for further investigation of the interaction between ground cover practices and weed control techniques. In this study, the effect of four different ground cover managements (M) in the inter-rows on C. dactylon population dynamics (changes in coverage and frequency) was assessed over three seasons (2015–2017): (M1) a no-till spontaneous vegetation ground cover managed by shredding; (M2) a no-till spontaneous vegetation ground cover managed by shredding plus herbicide application, (M3) tilled soil and spontaneous vegetation growing; and (M4) tilled soil and a barley cover crop seeded (Hordeum vulgare L.). Cynodon dactylon and the other weeds responded differently to the various weed control methods. After three seasons, the barley cover crop was the most efficient management system to control C. dactylon and other weeds. Final soil cover in barley cover crop and tilled soil with spontaneous vegetation were 0.5% and 1.1%, respectively, compared to 3.7% and 7.7% obtained by spontaneous vegetation shredded with and without herbicide application, respectively. In addition, total weed frequency varied from 9.7% for barley cover crop to 45.8% for spontaneous vegetation only shredded. Weed community composition changed due to the pressure exerted by each management and the adaptive strategy of the different species. This study highlights the importance of knowledge of how vegetation management influences weed flora to improve the sustainability of wine grape production systems., This work was funded by the Spanish Ministry of Economy and Competitiveness (AGL2014-52465-C4-2-R and AGL2017-83325-C4-2-R). The first author obtained a PhD grant from the University of Lleida (PhD grants).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Merge Fuzzy Visual Servoing and GPS-Based Planning to Obtain a Proper Navigation Behavior for a Small Crop-Inspection Robot

  • Bengochea-Guevara, José M.
  • Conesa-Muñoz, Jesús
  • Andújar, Dionisio
  • Ribeiro Seijas, Ángela
The authors wish to thank Pedro Hernáiz and his team (ICA-CSIC) for their invaluable help in the field trials. The authors wish to acknowledge the invaluable technical support of Damian Rodriguez. Author Contributions: The work was developed as a collaboration among all authors. J.M. Bengochea-Guevara and A Ribeiro designed the study. J.M. Bengochea-Guevara carried out the system integration and programming. D. Andújar posed the field experiments. J. Conesa-Muñoz mainly contributed to the development of the planner and provided support in the field tests with D. Andújar. A. Ribeiro directed the research, collaborating in the testing and the discussion of the results. The manuscript was mainly drafted by J.M. Bengochea-Guevara and A. Ribeiro and was revised and corrected by all co-authors. All authors have read and approved the final manuscript., The concept of precision agriculture, which proposes farming management adapted to crop variability, has emerged in recent years. To effectively implement precision agriculture, data must be gathered from the field in an automated manner at minimal cost. In this study, a small autonomous field inspection vehicle was developed to minimise the impact of the scouting on the crop and soil compaction. The proposed approach integrates a camera with a GPS receiver to obtain a set of basic behaviours required of an autonomous mobile robot to inspect a crop field with full coverage. A path planner considered the field contour and the crop type to determine the best inspection route. An image-processing method capable of extracting the central crop row under uncontrolled lighting conditions in real time from images acquired with a reflex camera positioned on the front of the robot was developed. Two fuzzy controllers were also designed and developed to achieve vision-guided navigation. A method for detecting the end of a crop row using camera-acquired images was developed. In addition, manoeuvres necessary for the robot to change rows were established. These manoeuvres enabled the robot to autonomously cover the entire crop by following a previously established plan and without stepping on the crop row, which is an essential behaviour for covering crops such as maize without damaging them., The Spanish Government has provided full and continuing support for this research work through projects AGL2011-30442-C02–02 and AGL2014-52465-C4-3-R., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessing Optimal Flight Parameters for Generating Accurate Multispectral Orthomosaicks by UAV to Support Site-Specific Crop Management

  • Mesas-Carrascosa, Francisco Javier
  • Torres-Sánchez, Jorge
  • Clavero-Rumbao, Inmaculada
  • García-Ferrer, Alfonso
  • Peña Barragán, José Manuel
  • Borra-Serrano, Irene
  • López Granados, Francisca
This article describes the technical specifications and configuration of a multirotor unmanned aerial vehicle (UAV) to acquire remote images using a six-band multispectral sensor. Several flight missions were programmed as follows: three flight altitudes (60, 80 and 100 m), two flight modes (stop and cruising modes) and two ground control point (GCP) settings were considered to analyze the influence of these parameters on the spatial resolution and spectral discrimination of multispectral orthomosaicked images obtained using Pix4Dmapper. Moreover, it is also necessary to consider the area to be covered or the flight duration according to any flight mission programmed. The effect of the combination of all these parameters on the spatial resolution and spectral discrimination of the orthomosaicks is presented. Spectral discrimination has been evaluated for a specific agronomical purpose: to use the UAV remote images for the detection of bare soil and vegetation (crop and weeds) for in-season site-specific weed management. These results show that a balance between spatial resolution and spectral discrimination is needed to optimize the mission planning and image processing to achieve every agronomic objective. In this way, users do not have to sacrifice flying at low altitudes to cover the whole area of interest completely., This research was partially financed by the RECUPERA-2020 (an agreement between CSIC and Spanish MINECO, EU-FEDER funds) and AGL2014-52465-C4-4-R Projects (MINECO, EU-FEDER funds). Research of Torres-Sánchez and Peña were financed by FPI and Ramon y Cajal Programs, respectively (Spanish Ministry of Economy and Competitiveness). We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An Approach to the Use of Depth Cameras for Weed Volume Estimation

  • Andújar, Dionisio
  • Dorado, José
  • Fernández-Quintanilla, César
  • Ribeiro Seijas, Ángela
The use of depth cameras in precision agriculture is increasing day by day. This type of sensor has been used for the plant structure characterization of several crops. However, the discrimination of small plants, such as weeds, is still a challenge within agricultural fields. Improvements in the new Microsoft Kinect v2 sensor can capture the details of plants. The use of a dual methodology using height selection and RGB (Red, Green, Blue) segmentation can separate crops, weeds, and soil. This paper explores the possibilities of this sensor by using Kinect Fusion algorithms to reconstruct 3D point clouds of weed-infested maize crops under real field conditions. The processed models showed good consistency among the 3D depth images and soil measurements obtained from the actual structural parameters. Maize plants were identified in the samples by height selection of the connected faces and showed a correlation of 0.77 with maize biomass. The lower height of the weeds made RGB recognition necessary to separate them from the soil microrelief of the samples, achieving a good correlation of 0.83 with weed biomass. In addition, weed density showed good correlation with volumetric measurements. The canonical discriminant analysis showed promising results for classification into monocots and dictos. These results suggest that estimating volume using the Kinect methodology can be a highly accurate method for crop status determination and weed detection. It offers several possibilities for the automation of agricultural processes by the construction of a new system integrating these sensors and the development of algorithms to properly process the information provided by them., The Spanish Ministry of Economy and Competitiveness has provided support for this research via projects AGL2014-52465-C4-3-R and AGL2014-52465-C4-1-R, and Bosch Foundation. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Detección de grama (Cynodon dactylon) en viña mediante imágenes adquiridas por un vehículo aéreo no tripulado (UAV)

  • Castro, Ana Isabel de
  • Peña Barragán, José Manuel
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • Valencia, Francisco
  • López Granados, Francisca
Trabajo presentado a las II Jornadas del Grupo de Viticultura y Enología (SECH), celebradas en Madrid el 3 y 4 de noviembre de 2016., equilibrar el vigor y rendimiento de la viña, resultando en una mejora de la calidad de la cosecha. Un problema creciente de este sistema de cultivo es el aumento de las poblaciones de la mala hierba gramínea Cynodon dactylon, especie perenne altamente competitiva y difícilmente controlable. El objetivo de este trabajo consistió en la detección en época temprana de C. dactylon en viñedos con cubierta vegetal y, seguidamente, el diseño de mapas de tratamiento localizado aplicando tecnología basada en vehículos aéreos no tripulados (UAV). El trabajo se realizó en parcelas de viña localizadas en Raimat (Lleida), en donde se tomaron imágenes con el UAV en Febrero-2016, coincidiendo con la parada vegetativa de la grama. Aplicando técnicas de análisis de imágenes basado en objetos, se desarrolló un algoritmo que permitió la clasificación automática de las imágenes en cuatro clases principales (viña, suelo desnudo, grama y cubierta vegetal) y la generación de mapas de grama para su control localizado. La aplicación de estas técnicas de viticultura de precisión de forma prolongada (2-3 años agrícolas), además de disminuir el coste económico y medioambiental del tratamiento, podría erradicar la mala hierba y favorecer el paso a producción ecológica, aumentando su valor añadido., Esta investigación fue financiada por el proyecto AGL2014-52465-C4-4R (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional). La investigación de Jorge Torres-Sánchez y el Dr. José M. Peña fue financiada por los programas FPI (BES-2012-052424) y Ramón y Cajal (MINECO), respectivamente., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Caracterización 3-D de viñas mediante imágenes procedentes de un vehículo aéreo no tripulado para el diseño de tratamientos localizados

  • Torres-Sánchez, Jorge
  • López Granados, Francisca
  • Castro, Ana Isabel de
  • Jiménez-Brenes, Francisco Manuel
  • Peña Barragán, José Manuel
Trabajo presentado a las II Jornadas del Grupo de Viticultura y Enología (SECH), celebradas en Madrid el 3 y 4 de noviembre de 2016., El manejo localizado de cultivos tiene como objetivo reducir la cantidad de insumos aplicados al campo, racionalizando los tratamientos según las necesidades reales derivadas de un análisis pormenorizado del cultivo. Este tipo de manejo implica un ahorro de costes para el agricultor e importantes beneficios medioambientales al reducirse el uso excesivo de agroquímicos. Antes del diseño de los tratamientos localizados es necesaria una completa y exacta caracterización morfológica del cultivo, tarea para la cual los vehículos aéreos no tripulados (conocidos como drones o UAVs) son una de las mejores opciones debido a que pueden tomar información en el momento deseado y con una resolución espacial muy elevada. En el presente trabajo se utilizó un multirrotor volando a 30 m de altura para capturar imágenes con una cámara convencional (RGB: rango visible) de bajo coste sobre dos parcelas comerciales de viña. Las imágenes fueron procesadas para obtener el modelado 3D del cultivo, tras lo que se diseñó un algoritmo de análisis de imagen completamente automatizado para la clasificación de la viña, su caracterización 3D y la detección de huecos en las hileras de cultivo. La validación de los resultados demostró una precisión cercana al 90 % en la clasificación de la viña y al 100 % en la detección de huecos. Además, la estimación de la altura de la viña tuvo un error medio cuadrático de 0,14 m., Esta investigación fue financiada por el proyecto AGL2014-52465-C4-4-R (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional). La investigación de Jorge Torres-Sánchez y el Dr. José M. Peña fue financiada por los programas FPI (BES-2012-052424) y Ramón y Cajal (MINECO), respectivamente., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantifying pruning impacts on olive tree architecture and annual canopy growth by using UAV-based 3D modelling

  • Jiménez-Brenes, Francisco Manuel
  • López Granados, Francisca
  • Castro, Ana Isabel de
  • Torres-Sánchez, Jorge
  • Serrano, Nicolás
  • Peña Barragán, José Manuel
[Background] Tree pruning is a costly practice with important implications for crop harvest and nutrition, pest and disease control, soil protection and irrigation strategies. Investigations on tree pruning usually involve tedious on-ground measurements of the primary tree crown dimensions, which also might generate inconsistent results due to the irregular geometry of the trees. As an alternative to intensive field-work, this study shows a innovative procedure based on combining unmanned aerial vehicle (UAV) technology and advanced object-based image analysis (OBIA) methodology for multi-temporal three-dimensional (3D) monitoring of hundreds of olive trees that were pruned with three different strategies (traditional, adapted and mechanical pruning). The UAV images were collected before pruning, after pruning and a year after pruning, and the impacts of each pruning treatment on the projected canopy area, tree height and crown volume of every tree were quantified and analyzed over time., [Results] The full procedure described here automatically identified every olive tree on the orchard and computed their primary 3D dimensions on the three study dates with high accuracy in the most cases. Adapted pruning was generally the most aggressive treatment in terms of the area and volume (the trees decreased by 38.95 and 42.05% on average, respectively), followed by trees under traditional pruning (33.02 and 35.72% on average, respectively). Regarding the tree heights, mechanical pruning produced a greater decrease (12.15%), and these values were minimal for the other two treatments. The tree growth over one year was affected by the pruning severity and by the type of pruning treatment, i.e., the adapted-pruning trees experienced higher growth than the trees from the other two treatments when pruning intensity was low (<10%), similar to the traditionally pruned trees at moderate intensity (10–30%), and lower than the other trees when the pruning intensity was higher than 30% of the crown volume., [Conclusions] Combining UAV-based images and an OBIA procedure allowed measuring tree dimensions and quantifying the impacts of three different pruning treatments on hundreds of trees with minimal field work. Tree foliage losses and annual canopy growth showed different trends as affected by the type and severity of the pruning treatments. Additionally, this technology offers valuable geo-spatial information for designing site-specific crop management strategies in the context of precision agriculture, with the consequent economic and environmental benefits., This research was funded by the AGL2014-52465-C4-4R Project (The Spanish Ministry of Economy, Industry and Competitiveness, MINECO) and the CSIC-Intramural-Project (Ref. 201640E034). The research performed by Dr. de Castro, Dr. Torres-Sánchez and Dr. Peña was financed by the Juan de la Cierva, FPI and Ramón y Cajal Programmes (Spanish MINECO funds), respectively. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Uso de drones (UAV) para la detección de grama en cubiertas de viña

  • Castro, Ana Isabel de
  • Peña Barragán, José Manuel
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • Valencia, Francisco
  • López Granados, Francisca
El manejo adecuado de las cubiertas vegetales en viñedos permite equilibrar el vigor y rendimiento de la viña, resultando en una mejora de la calidad de la cosecha. Estas ventajas quedan mermadas con las infestaciones de grama (Cynodon dactylon), una mala hierba perenne difícilmente controlable. Por ello se analizaron imágenes obtenidas en viñedos con vehículos aéreos no tripulados (UAV), mediante técnicas basadas en objetos (OBIA) para determinar la posición de los rodales de grama. El algoritmo desarrollado permitió la clasificación automática de las cuatro clases (viña, suelo desnudo, grama y cubierta vegetal) y la generación de mapas de grama para su control localizado. Esta técnica de viticultura de precisión conlleva una disminución del coste económico y medioambiental del tratamiento., Esta investigación fue financiada por el proyecto AGL2014-52465-C4-4R (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional). La investigación del Dr. Jorge Torres-Sánchez, Dr. Ana de Castro y el Dr. José M. Peña fue financiada por los programas FPI (BES-2012-052424), Juan de la Cierva (MINECO) y Ramón y Cajal (MINECO), respectivamente., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accurate ortho-mosaicked six-band multispectral UAV images as affected by mission planning for precision agriculture proposes

  • Mesas-Carrascosa, Francisco Javier
  • Clavero-Rumbao, Inmaculada
  • Torres-Sánchez, Jorge
  • García-Ferrer, Alfonso
  • Peña Barragán, José Manuel
  • López Granados, Francisca
Weed mapping at very early phenological stages of crop and weed plants for site-specific weed management can be achieved by using ultra-high spatial and high spectral resolution imagery provided by multispectral sensors on-board an unmanned aerial vehicle (UAV). These UAV images cannot cover the whole field, resulting in the need to take a sequence of multiple overlapped images. Therefore, the overlapped images must be oriented and ortho-rectified to create an accurate ortho-mosaicked image of the entire field for further classification. Because the spatial quality of ortho-mosaicked images mainly depend on the flight altitude and percentage of overlap, this paper describes the effect of flight parameters using a multirotor UAV and a multispectral camera on the mosaicking workflow. The objective is to define the best configuration for the mission planning to generate accurate ortho-images. A set of flights with a range of altitudes (30, 40, 50, 60, 70, 80, and 90 m) above ground level (AGL) and two end-lap and side-lap settings (60–30% and 70–40%) were studied. The spatial accuracy of ortho-mosaics was evaluated taking into consideration the ASPRS test. The results showed that the best flight setting to keep the spatial accuracy in the bundle adjustment was 70–40% overlap and altitudes AGL ranging from 60 to 90 m. At these flight altitudes, the spatial resolution was quite similar, making it possible to optimize the mission planning, flying at a higher altitude and increasing the area overflow without decreasing the ortho-mosaic spatial quality. This study has relevant implications for further use in detecting weed seedlings in crops., This research was partly funded by the AGL2014-52465-C4-4R project (Spanish Ministry of Economy and Competition, FEDER Funds: Fondo Europeo de Desarrollo Regional). Research of Mr Torres-Sánchez and Dr Peña was financed by the FPI [grant number BES-2012-052424] and Ramón y Cajal [grant number RYC-2013-14874] Programs (Spanish MINECO funds), respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Object-based early monitoring of a grass weed in a grass crop using high resolution UAV imagery

  • López Granados, Francisca
  • Torres-Sánchez, Jorge
  • Castro, Ana Isabel de
  • Serrano Pérez, Angélica
  • Mesas-Carrascosa, Francisco Javier
  • Peña Barragán, José Manuel
Sorghum halepense (johnsongrass) is a perennial weed with a vegetative reproductive system and one of the most competitive weeds in maize showing a spatial distribution in compact patches. When maize is irrigated, successive weed emergences occur in the early phenological phases of the crop, which require several herbicide applications. Our aim was to provide an accurate tool for an early detection and mapping of johnsongrass patches and delineate the actual surface area requiring a site-specific herbicide treatment based on the weed coverage. This early detection represents a major challenge in actual field scenarios because both species are in the Poaceae family, and show analogous spectral patterns, an extraordinarily similar appearance and a parallel phenological evolution. To solve this, an automatic OBIA (object-based-image-analysis) procedure was developed to be applied on orthomosaicked images using visible (red-green-blue bands) and multispectral (red-green-blue and near infrared bands) cameras collected by an unmanned aerial vehicle (UAV) that flew at altitudes of 30, 60 and 100 m on two maize fields. One of our first phases was the generation of accurate orthomosaicked images of an herbaceous crop such as maize, which presented a repetitive pattern and nearly no invariant parameters to conduct the aerotriangulation. Here, we show that high-quality orthomosaicks were produced from both cameras and that they were able to be the first step for mapping the johnsongrass patches. The most accurate weed maps were obtained using the multispectral camera at an altitude of 30 m in both fields. These maps were then used to design a site-specific weed management program, and we demonstrated that potential herbicide savings ranged from 85 to 96 %. Our results showed that accurate and timely maps of johnsongrass patches in maize can be a key element in achieving site-specific and sustainable herbicide applications for reducing spraying herbicides and costs., This research was partially financed by the AGL2014-52465-C4-4-R Spanish MINECO, EU-FEDER funds. Research of Mr. Torres-Sánchez and Dr. Peña was financed by the FPI (BES-2012-052424) and Ramón y Cajal (RYC-2013-14874) Programs, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Detección automática de vegetación en estado de plántulas en imágenes procedentes de un vehículo aéreo no tripulado (UAV): aplicación para la discriminación de malas hierbas, Automatic detection of vegetation in early season for weed detection in UAV images

  • Torres-Sánchez, Jorge
  • Peña Barragán, José Manuel
  • Serrano Pérez, Angélica
  • López Granados, Francisca
Trabajo presentado en el XV Congreso de la Sociedad Española de Malherbologia (SEMh), celebrado en Sevilla del 19 al 22 de octubre de 2015., [ES] Investigaciones recientes han demostrado la capacidad de las imágenes procedentes de vehículos aéreos no tripulados (UAV) para la cartografía de malas hierbas en fase de plántula, entre otros usos. El primer paso para su detección es la discriminación de suelo desnudo y vegetación (malas hierbas + cultivo). Para ello, es necesario definir un método que calcule automáticamente el umbral óptimo del índice de vegetación que facilita su detección. Uno de los métodos de cálculo de umbrales más extendido es el método de Otsu. Se presenta la adaptación de este método a un entorno de análisis de imagen orientado a objetos para su utilización en imágenes UAV de girasol, maíz y trigo tomadas con dos sensores de distinto rango espectral a bordo de un UAV. Se obtuvieron valores de R2 en torno a 0,7 para la relación entre la vegetación observada y la detectada automáticamente., [EN] Recent research has demonstrated the ability of Unmanned Aerial Vehicle (UAV) images for weed mapping in early season. First step is the discrimination between bare soil and vegetation (weeds + crop) throughout the definition of a method for optimal thresholding of the vegetation indices that allows vegetation detection. One of the best known thresholding procedures is the Otsu’s method. The adaptation of this method to an Object-based image analysis framework is presented for its application for vegetation detection in UAV images acquired over sun flower, maize and wheat crop. R2 values about 0.7 were achieved for the regression between observed and automatically detected vegetation., Este trabajo fue financiado por el proyecto AGL2014-52465-C4-4-R MINECO-FEDER. La investigación de Jorge Torres Sánchez y José Manuel Peña Barragán fue financiada por los programas FPI y Ramón y Cajal, respectivamente., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Cartografía de Cynodon dactylon en viñedo mediante imágenes UAV y tecnología OBIA para un uso sostenible y localizado de herbicidas, Mapping Cynodon dactylon in vineyard by using UAV-images and OBIA technology for site-specific weed management

  • Castro, Ana Isabel de
  • Peña Barragán, José Manuel
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • Recasens, Jordi
  • Valencia, Francisco
  • López Granados, Francisca
Trabajo presentado en el XVI Congreso de la Sociedad Española de Malherbología, celebrado en Pamplona-Iruña, entre los días 25 y 27 de octubre de 2017., [ES] El manejo adecuado de las cubiertas vegetales en viñedos de regadío protege el suelo de la erosión y permite equilibrar el vigor y rendimiento de la viña, lo que redunda en una mejora de la calidad de la cosecha. Estas ventajas quedan mermadas con las infestaciones de grama (Cynodon dactylon) en las cubiertas, una especie perenne, altamente competitiva y difícilmente controlable. El objetivo de este trabajo consistió en la detección temprana y mapeo de C. dactylon en viñedos con cubierta vegetal mediante el uso de imágenes UAV (vehículos aéreos no tripulados) y técnicas de análisis de imágenes basadas en objetos (OBIA). El algoritmo desarrollado permitió la clasificación de los 4 usos principales presentes en el viñedo (viña, suelo desnudo, grama y cubierta vegetal) y la generación de mapas de grama para su control localizado, disminuyendo de esta manera el coste económico y medioambiental del tratamiento., [EN] The use of cover crops is a usual management practice for irrigated vineyards that allows controlling vineyard vigor and yield, also improving the crop quality. However, those advantages have been reduced by bermudagrass (C. dactylon) populations infesting cover crop areas. Bermudagrass is a perennial, very competitive grass and tolerant of reap, pretty difficult to control. The objective of this research was the early mapping of C. dactylon patches in order to provide an optimized site-specific weed management. Object-based image analysis (OBIA) techniques applied to unmanned aerial vehicle (UAV) imagery solved the limitation of spectral similarity between bermudagrass and cover crops or bare soil. The classified maps showed the four main classes in the vineyard (vine, cover crop, C. dactylon and bare soil) with 85% overall accuracy, that allow developing new strategies for site-specific control of C. dactylon infestations and decreasing economical and environmental costs., Esta investigación fue financiada por el proyecto AGL2014-52465-C4-4-R (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional). La investigación del Dr. Jorge Torres-Sánchez, Dr. Ana de Castro y el Dr. José M. Peña fue financiada por los programas FPI (BES-2012-052424), Juan de la Cierva (MINECO) y Ramón y Cajal (MINECO), respectivamente., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Detección temprana de malas hierbas dentro y fuera de la línea de cultivo mediante imágenes- UAV y modelos 3D, Early weed detection between and within the crop row using UAV images and 3D models

  • Torres-Sánchez, Jorge
  • López Granados, Francisca
  • Castro, Ana Isabel de
  • Jiménez-Brenes, Francisco Manuel
  • Peña Barragán, José Manuel
Trabajo presentado en el XVI Congreso de la Sociedad Española de Malherbología, celebrado en Pamplona-Iruña, entre los días 25 y 27 de octubre de 2017., [ES] Se ha desarrollado una metodología automática para la detección temprana de malas hierbas dentro y fuera de la línea de cultivo en fase temprana usando como variable discriminante la altura de las plantas (cultivo y malas hierbas), calculada mediante técnicas fotogramétricas. Se utilizó un UAV equipado con una cámara modificada para captar información en las bandas del Rojo, Verde e Infrarrojo Cercano. Se tomaron imágenes sobre una parcela de girasol infestada por diferentes especies de malas hierbas en fase temprana. Las imágenes fueron procesadas para generar una ortoimagen y un modelo tridimensional del cultivo y malas hierbas para su posterior análisis usando métodos orientados a objetos y el clasificador Random Forest. Se comparó la infestación de malas hierbas detectada con la realmente existente en el campo en una serie de marcos de referencia, obteniéndose un coeficiente de determinación de 0,91 entre ambas variables., [EN] An automatic methodology for early season weed detection between and within the crop rows has been developed, where the main innovation was the use of plant height as discriminant feature. An UAV equipped with a conventional camera modified for R (red), G (green) and NIR (near infrared) acquisition was used for taken images over a sunflower plot infested with different weed species in early season. The images were processed to generate an orthomosaic and a digital surface model (DSM) representing both the crop and weeds, and they were analyzed using object based image analysis (OBIA) and Random Forest classifier. Automatically detected weed cover was compared with the real weed cover in the field in a number of reference frames, and the determination coefficient between both variables was 0.91., Este trabajo fue financiado por el proyecto AGL2014-52465-C4-4-R MINECO-FEDER. La investigación de Jorge Torres Sánchez, Ana Isabel de Castro Megías y José Manuel Peña Barragán fue financiada por los programas FPI, Juan de la Cierva, y Ramón y Cajal, respectivamente. La estancia de Jorge Torres Sánchez en la Universidad de Salzburgo fue financiada por el programa FPI., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Optimización de la cartografía de malas hierbas mediante técnicas geoestadísticas y teledetección con UAV, Optimization of weed mapping using geostatistical techniques and remote sensing with UAV

  • Jurado-Expósito, Montserrat
  • Castro, Ana Isabel de
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • López Granados, Francisca
Trabajo presentado en el XVI Congreso de la Sociedad Española de Malherbología, celebrado en Pamplona-Iruña, entre los días 25 y 27 de octubre de 2017., [ES] Se evalúa una metodología para la cartografía de malas hierbas en época tardía del cultivo combinando datos espaciales georreferenciados (variable primaria) con información espectral (variables secundarias). Como variable 1ia se ha estudiado Papaver rhoeas L. en trigo y como variables 2ias: las bandas Rojo, Verde, Azul y NIR (Near-InfraRed) de imágenes UAV (Unmanned Aerial Vehicles) tomadas en campo el día del muestreo. Se comparan dos tipos de estimadores: krigeado ordinario (análisis de la variable 1iª) y cokrigeado (análisis incorporando variables 2ias). La comparación de la precisión de los mapas de infestación obtenidos se ha realizado en base a la incertidumbre de las estimas. Los resultados muestran que la incorporación de variables secundarias espectrales al proceso de interpolación geoestadística mejora la estimación de la variable 1ia, especialmente cuando se incluye en el análisis la banda Verde., [EN] A methodology for late weed mapping combining georeferenced spatial data (1st variable) with spectral information (2nd variables) is evaluated. The Papaver rhoeas L. spatial data in wheat was used as1st variable and Red, Green, Blue and NIR bands from UAV images as 2nd variables. Two types of algorithms were compared: Ordinary Kriging (analysis of 1st variable) and CoKriging (to incorporate the 2nd variables). Comparison of infestations maps accuracy was based on cross validation statistics. Results showed that including spectral secondary variables into geostatistical analysis improves the accuracy of 1st variable estimations, especially when band G is included as 2nd variable., Estudio financiado por el proyecto AGL2014-52465-C4-4-R MINECO-FEDER. Agradecemos al Dr. Recasens y su grupo su valiosa ayuda en las prospecciones de campo. La investigadora Dr. Ana Isabel de Castro fue financiada por el programas Juan de la Cierva (MINECO)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Principales variables para la detección de plántulas de amapola (Papaver rhoeas) en imágenes tomadas con un vehículo aéreo no tripulado, Main features for the detection of Papaver rhoeas seedlings in images collected with an unmanned aerial vehicle

  • Peña Barragán, José Manuel
  • Castro, Ana Isabel de
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • Valencia, Francisco
  • López Granados, Francisca
Trabajo presentado en el XVI Congreso de la Sociedad Española de Malherbología, celebrado en la Universidad Pública de Navarra, Pamplona-Iruña, entre los días 25 y 27 de octubre de 2017., [ES] En este trabajo se han evaluado variables espectrales, morfológicas (forma, tamaño), contextuales (posición) y texturales que permitan desarrollar un procedimiento automático de clasificación de plántulas de amapola, otras malas hierbas, cultivo y suelo desnudo en imágenes adquiridas con un vehículo aéreo no tripulado (UAV). Las imágenes se tomaron con una cámara modificada para la obtención de información en infrarrojo-color y a una resolución espacial de 0,60 cm/píxel. Se aplicaron técnicas avanzadas de análisis de imágenes basadas en objetos para la obtención de las variables descritas y se desarrolló un modelo tipo árbol de decisión para cuantificar la importancia de cada variable en la clasificación. Los resultados indicaron que la información espectral basada en el índice de vegetación de diferencias normalizadas (NDVI, por sus siglas en inglés) aportó un 46% al modelo de clasificación, principalmente para la discriminación de objetos de vegetación y suelo desnudo. Por otra parte, para la identificación de las plántulas de amapola fue necesario incorporar además variables morfológicas (principalmente, el área [tamaño] del objeto, que aportó un 36% al modelo) y texturales (p.ej., textura media y entropía, con un 11% de contribución en el modelo). Por su parte, la distancia relativa de los objetos a la línea de cultivo tuvo escasa importancia en la clasificación total., [EN] A group of spectral, morphological (shape-based, size), contextual (location), and textural features were evaluated with the aim of automatic classification of Papaver rhoeas seedlings, other weeds, crop plants and bare soil in images collected with an unmanned aerial vehicle (UAV). The images were taken with a color-infrared modified camera at 0,60 cm/pixel of spatial resolution. The features were obtained by applying advanced object-based images techniques, and their contribution to the classification was analyzed with decision tree modeling. Spectral information from the normalized difference vegetation index (NDVI) contributed 46% to the model, mainly due to its capacity to discriminate vegetation and bare soil objects. Additionally, identification of Papaver rhoeas seedlings was possible by incorporating morphological (mainly object size, which contributed to 36% to the model) and textural features (e.g., mean and entropy, which contributed to 11% to the model). Finally, relative distance of the objects to the crop-rows had a low importance in the total classification results., Investigación financiada por el proyecto MINECO AGL2014-52465-C4-4R. La investigación de Dr. José M. Peña, Dr. Ana de Castro y Dr. Jorge Torres-Sánchez fue financiada por los programas Ramón y Cajal (MINECO), Juan de la Cierva (MINECO) y FPI (BES-2012-052424), respectivamente, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spatial Analysis of Digital Imagery of Weeds in a Maize Crop

  • San Martín, Carolina
  • Milne, Alice E.
  • Webster, Richard
  • Storkey, Jonathan
  • Andújar, Dionisio
  • Fernández-Quintanilla, César
  • Dorado, José
Modern photographic imaging of agricultural crops can pin-point individual weeds, the patterns of which can be analyzed statistically to reveal how they are affected by variation in soil, by competition from other species and by agricultural operations. This contrasts with previous research on the patchiness of weeds that has generally used grid sampling and ignored processes operating at a fine scale. Nevertheless, an understanding of the interaction of biology, environment and management at all scales will be required to underpin robust precise control of weeds. We studied the spatial distributions of six common weed species in a maize field in central Spain. We obtained digital imagery of a rectangular plot 41.0 m by 10.5 m (= 430.5 m<sup>2</sup>) and from it recorded the exact coordinates of every seedling: more than 82,000 individuals in all. We analyzed the resulting body of data using three techniques: an aggregation analysis of the punctual distributions, a geostatistical analysis of quadrat counts and wavelet analysis of quadrat counts. We found that all species were aggregated with average distances across patches ranging from 3 cm–18 cm. Species with small seeds tended to occur in larger patches than those with large seeds. Several species had aggregation patterns that repeated periodically at right angles to the direction of the crop rows. Wheel tracks favored some species (e.g., thornapple), whereas other species (e.g., johnsongrass) were denser elsewhere. Interactions between species at finer scales (<1 m) were negligible, although a negative correlation between thornapple and cocklebur was evident. We infer that the spatial distributions of weeds at the fine scales are products both of their biology and local environment caused by cultivation, with interactions between species playing a minor role. Spatial analysis of such high-resolution imagery can reveal patterns that are not immediately evident from sampling at coarser scales and aid our understanding of how and why weeds aggregate in patches., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) under Project AGL2014-52465-C4-1-R. We thank the Ministry and also David Campos and José Manuel Martín for the substantial task of processing the images. The contributions of Alice E. Milne and Jonathan Storkey form part the Soil to Nutrition (S2N) strategic programme (BBS/E/C/000I0330) funded by the Biological Sciences Research Council (BBSRC) and NE/N018125/1 LTS-M ASSIST - Achieving Sustainable Agricultural Systems, funded by NERC and BBSRC (BBS/E/C/000I0140) of the United Kingdom.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Cuantificación de la influencia de la poda sobre la arquitectura 3D del olivo mediante tecnología UAV

  • Jiménez-Brenes, Francisco Manuel
  • López Granados, Francisca
  • Torres-Sánchez, Jorge
  • Castro, Ana Isabel de
  • Serrano, Nicolás
  • Peña Barragán, José Manuel
Comunicaciones Científicas Simposium Expoliva 2017. Jaén (España), 10-12 mayo., El tipo y la intensidad de la poda del olivo modifican la copa del árbol con diferente grado de severidad lo que afecta al crecimiento y a la calidad de su fruto. En esta investigación se ha desarrollado un conjunto tecnológico que consiste en la combinación de la adquisición de imágenes procedentes de un vehículo aéreo no tripulado (UAV) y el correspondiente análisis de dichas imágenes basado en objetos (OBIA). El objetivo de este trabajo ha sido la monitorización 3D de cada uno de los árboles de una parcela de olivar en la que se llevaron a cabo tres tratamientos distintos de poda (tradicional, adaptada y mecanizada). Se realizaron tres vuelos UAV sobre la parcela en tres momentos diferentes (antes de la poda, un mes después de la poda y un año después de la poda) y se analizaron 3 variables geométricas: altura, área proyectada y volumen de copa de cada árbol. Los resultados obtenidos muestran que existen diferencias significativas entre las variables geométricas analizadas dependiendo de la poda, siendo los olivos bajo poda tradicional los que registraron mayores crecimientos de altura, área proyectada y volumen. Debido a que actualmente no existen referencias científicas que cuantifiquen los efectos de la poda con tecnología UAV y algoritmos de clasificación OBIA, este trabajo tiene potencialidad para aplicaciones en otros cultivos leñosos., Esta investigación fue financiada por el proyecto AGL2014-52465-C4-4-R (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional). La investigación del Dr. Jorge Torres-Sánchez, Dr. Ana de Castro y el Dr. José M. Peña fue financiada por los programas FPI (BES-2012-052424), Juan de la Cierva (MINECO) y Ramón y Cajal (MINECO), respectivamente., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Mapping Cynodon dactylon in vineyards using UAV images for site-specific weed control

  • Castro, Ana Isabel de
  • Peña Barragán, José Manuel
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • López Granados, Francisca
Paper presented at the 11th European Conference on Precision Agriculture (ECPA 2017), John McIntyre Centre, Edinburgh, UK, July 16–20 2017)., In Spain, the use of annual cover crops is a crop management practice for irrigated vineyards that allows controlling vineyard vigor and yield, which also leads to improve the crop quality. Recently, Cynodon dactylon (bermudagrass) has been reported to infest those cover crops and colonize the grapevine rows, resulting in significant yield and economic losses due to the competition for water and nutrients. From timely unmanned aerial vehicle (UAV) imagery, the objective of this research was to map C. dactylon patches in order to provide an optimized site-specific weed management. A quadrocopter UAV equipped with a point-and-shoot camera was used to collect a set of aerial red-green-blue (RGB) images over a commercial vineyard plot, coinciding with the dormant period of C. dactylon (February 2016). Object-based image analysis (OBIA) techniques were used to develop an innovative algorithm for early discrimination and mapping of C. dactylon, which had the ability to solve the limitation of spectral similarity of this weed with cover crops or bare soil. As a general result, the classified maps of the studied vineyard showed four main classes, i.e. vine, cover crop, C. dactylon and bare soil, with 85% overall accuracy. These weed maps allow developing new strategies for site-specific control of C. dactylon populations in the context of precision viticulture., This research was partly financed by the AGL2014-52465-C4-4R project (Spanish Ministry of Economy and Competition, FEDER Funds). Research of Dr. de Castro, Dr. Peña and Dr. Torres-Sánchez were financed by the Juan de la Cierva, Ramón y Cajal and FPI (MINECO), Programs, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Últimos avances en tecnologías para la detección y el control de las malas hierbas

  • Fernández-Quintanilla, César
  • Dorado, José
  • Andújar, Dionisio
  • Peña Barragán, José Manuel
  • Ribeiro Seijas, Ángela
  • Castro, Ana Isabel de
  • López Granados, Francisca
Durante los últimos años el desarrollo de nuevas tecnologías para la agricultura de precisión ha alcanzado un considerable grado de madurez. En el ámbito específico de la gestión de las malas hierbas se han desarrollado numerosas tecnologías tanto de detección como de actuación. A los procedimientos disponibles para la detección desde satélite o d,esde avión se han unido otros mucho más precisos para la detección desde drones volando a baja altura. Por otro lado, la disponibilidad actual de sensores y cámaras 2D y 3D de muy alta resolución y de ordenadores más rápidos capaces de procesar grandes volúmenes de datos abre la posibilidad de llevar a cabo actuaciones en tiempo real. En este trabajo se expone una breve síntesis de los últimos avances producidos en sistemas de detección aérea y terrestre así como de algunos de los equipos inteligentes disponibles para el control físico o químico de las malas hierbas detectadas., Parte de los trabajos expuestos están siendo financiados por los proyectos AGL2014-52465-C4-1R; C4-3R y C4-4R integrados todos en un proyecto coordinado (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Papaver rhoeas L. mapping with cokriging using UAV imagery

  • Jurado-Expósito, Montserrat
  • Castro, Ana Isabel de
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • López Granados, Francisca
Accurately mapping the spatial distribution of weeds within a field is a first step towards effective Site-specific Weed Management. The main objective of this study was to investigate if the multivariate geostatistical method of cokriging (COK) can be used to improve the accuracy of Papaver rhoeas L. infestations maps in winter wheat fields using high-resolution UAV imagery as ancillary information. The primary variable was obtained by intensive grid weed density field samplings and the secondary variables were derived from the UAV imagery taken the same day as the weed field samplings (e.g. wavebands and derivative products, such as band ratios and vegetation indexes). Univariate Ordinary Kriging (OK) and multivariate cokriging (COK) interpolation methods were used and compared for Papaver density mapping. The performances of the different methods were assessed by cross-validation. The results indicated that COK outperformed OK in the spatial interpolation of Papaver density. COK reduced the prediction errors and enhanced the accuracy of Papaver estimates maps. The best performances were obtained when COK was performed with the UAV-secondary variables that yielded the highest correlation with Papaver density and produced the strongest spatial cross-semivariograms. On average, the COK with UAV-derived ancillary variables improved the accuracy of mapping Papaver density by 11 to 21% compared with OK. The results suggest the great potential of high-resolution UAV imagery as a source of ancillary information to improve the accuracy of spatial mapping of sparsely sampled target variables using COK., This research was financed by the AGL2014-52465-C4-4-R and AGL2017-83325-C4-4-R MINECO (Spanish Ministry of Economy and Competition, FEDER Funds). Research of AI. de Castro was financed by Juan de la Cierva (MINECO) program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Is the current state of the art of weed monitoring suitable for site-specific weed management in arable crops?

  • Fernández‐Quintanilla, C.
  • Peña, J. M.
  • Andújar, Dionisio
  • Dorado, José
  • Ribeiro Seijas, Ángela
  • López Granados, Francisca
Weed monitoring is the first step in any site‐specific weed management programme. A relatively large variety of platforms, cameras, sensors and image analysis procedures are available to detect and map weed presence/abundance at various times and spatial scales. Remote sensing from satellites or aircraft can provide accurate weed maps when the images are obtained at late weed phenological stages. Cameras located on unmanned aerial vehicles (UAVs) have been shown to be adequate for early‐season weed detection in a variety of wide‐row crops, providing images with relatively high spatial resolutions. Alternatively, weed detection/mapping systems from ground‐based platforms can achieve even higher resolutions using a variety of non‐imaging and imaging technologies. These ground systems are suited, in some cases, for real‐time site‐specific weed management. Despite this rich arsenal of technologies, their commercial adoption is, apparently, low. In this study, we describe the state of the art of remotely sensed and ground‐based weed monitoring in arable crops and the current level of adoption of these technologies, exploring major constraints for adoption and trying to identify research gaps and bottlenecks., Spanish Ministry of Economy, Industry and Competitiveness. Grant Numbers: AGL2014‐52465‐C4, AGL2017‐83325‐C4, RYC‐2013‐14874, RYC‐2016‐20355. FEDER (or ERDF in English), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Geometrical Model to Predict the Spatial Expansion of Sorghum Halepense in Maize Fields

  • Andújar, Dionisio
  • Rodriguez, X.
  • Rueda-Ayala, Víctor
  • Ribeiro Seijas, Ángela
  • Fernández Quintanilla, Cesar
  • Dorado, Jose
New technologies, such as Differential Global Positioning Systems (DGPS) and Geographic Information Systems (GIS), may be useful in order to create models to predict the spatio-temporal behaviour of weeds. The aim of this study was to generate a geometric model able to predict the patch expansion of S. halepense, a problematic perennial weed in maize crops in Central Spain. From previous infestation maps, the model describes new possible spreading areas for the upcoming growing season, and therefore, herbicide treatments can be planned on time. Two different experiments were implemented, in which initial patch density and size were examined. Patches of different size (1, 10 and 100 m2) and density (4, 20 and 100 shoots m−2), were established. These patches were visually identified, their perimeter defined and their density characterized, during three growing seasons (from 2008 to 2010 campaigns). According to this information different descriptors were built: (1) area and density of each patch; (2) the relative growth in width and length, according to space and time and compared with previous years; and (3) the increased density ratio, calculated in relation of patch size and distance to previous patch in the new infestation areas of expansion. All these descriptors were added to the model in order to predict the patch expansion in the last studied season (i. e., 2010) using previous maps (i. e., season 2008 and 2009). The model uses geometrical assimilation to predict, and two expansion assumptions were considered: (a) a conservative approach based on triangular geometry; and (b) a rectangular geometry which maximizes the simulated infested area. The results were compared with the ground truth map created in 2010. Each method showed weaknesses and strengths. The triangular approach minimized the infested area, mainly in the small patches, and therefore it could predict the expansion of previously established patches, but not the emergence of new ones. In contrast, the rectangular approach simulated the position of new foci, maximizing the infested area. Therefore, although a substantial reduction of herbicides is possible using both models, a final decision must be taken individually for each field., The Spanish Ministry of Economy and Competitiveness has provided support for this research via project AGL2014-52465-C4-3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Weed Decision Threshold as a Key Factor for Herbicide Reductions in SiteSpecific Weed Management

  • San Martín, Carolina
  • Andújar, Dionisio
  • Barroso, Judit
  • Fernández Quintanilla, Cesar
  • Dorado, José
The objective of this research was to explore the influence that weed decision threshold (DT; expressed as plants m−2), weed spatial distribution patterns, and spatial resolution of sampling have on potential reduction in herbicide use under site-specific weed management. As a case study, a small plot located in a typical corn field in central Spain was used, constructing very precise distribution maps of the major weeds present. These initial maps were used to generate herbicide prescription maps for each weed species based on different DTs and sampling resolutions. The simulation of herbicide prescription maps consisted of on/off spraying decisions based on information from two different approaches for weed detection: ground-based vs. aerial sensors. In general, simulations based on ground sensors resulted in higher herbicide savings than those based on aerial sensors. The extent of herbicide reductions derived from patch spraying was directly related to the density and the spatial distribution of each weed species. Herbicide savings were potentially high (up to 66%) with relatively sparse patchy weed species (e.g., johnsongrass) but were only moderate (10 to 20%) with abundant and regularly distributed weed species (e.g., velvetleaf). However, DT has proven to be a key factor, with higher DTs resulting in reductions in herbicide use for all the weed species and all sampling procedures and resolutions. Moreover, increasing DT from 6 to 12 plants m−2 resulted in additional herbicide savings of up to 50% in the simulations for johnsongrass and up to 28% savings in the simulations for common cocklebur. Nonetheless, since DT determines the accuracy of patch spraying, the consequences of using higher DTs could be leaving areas unsprayed, which could adversely affect crop yields and future weed infestations, including herbicide-resistant weeds. Considering that the relationship between DT and accuracy of herbicide application depends on weed spatial pattern, this work has demonstrated the possibility of using higher DT values in weeds with a clear patchy distribution compared with weeds distributed regularly., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) under Project AGL2014-52465-C4-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A LiDAR-Based System to Assess Poplar Biomass

  • Andújar, Dionisio
  • Escolà, A.
  • Rosell Polo, Joan R.
  • Rueda Ayala, Víctor
  • Fernández Quintanilla, César
  • Ribeiro Seijas, Ángela
  • Dorado, José
This study evaluated the capabilities of a LiDAR-based system to characterize poplar trees for biomass production. The precision of the system was assessed by analyzing the relationship between the distance records and biophysical parameters. The terrestrial laser scanner (TLS) system consisted of a 2D time-of-flight LiDAR sensor, a gimbal to dynamically stabilize the sensor and a RTK-GPS to georeference its location and, subsequently, the sensor data. The sensor and its stabilizer were fixed facing downwards, on a metal frame designed for this purpose. Then, it was mounted on an all-terrain vehicle to perform 2D scans in planes perpendicular to the travel direction. Distances between the sensor and the surrounding objects had a high spatial resolution, providing high density 3D point clouds. Results on the reliability of the LiDAR system to estimate plant height showed a significant relationship between the sensor readings and actual poplar height and biomass data. In addition, tree biomass and tree volume were properly estimated in the point cloud. Regression analysis showed significant estimates of 0.79 and 0.89 for biomass and volume, respectively. These results reveal the potential of the LiDAR sensor to estimate both, plant height and plant biomass., This research was funded by the CICyT (Commision Interministerial de Ciencia y Tecnología, Spain), under Agreement No. AGL2011-25243 and AGL2014-52465-C4., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Using depth cameras to extract structural parameters to assess the growth state and yield of cauliflower crops

  • Andújar, Dionisio
  • Ribeiro Seijas, Ángela
  • Fernández Quintanilla, César
  • Dorado, José
The use of robotic systems for horticultural crops is widely known. However, the use of these systems in cruciferous vegetables remains a challenge. The case of cauliflower crops is of special relevance because it is a hand-harvested crop for which the cutting time is visually chosen. This methodology leads to a yield reduction, as some inflorescences are cut before ripening because the leaves hide their real state of maturity. This work proposes the use of depth cameras instead of visual estimation. Using Kinect Fusion algorithms, depth cameras create a 3D point cloud from the depth video stream and consequently generate solid 3D models, which have been compared to the actual structural parameters of cauliflower plants. The results show good consistency among depth image models and ground truth from the actual structural parameters. In addition, the best time for individual fruit cutting could be detected using these models, which enabled the optimization of harvesting and increased yields. The accuracy of the models deviated from the ground truth by less than 2 cm in diameter/height, whereas the fruit volume estimation showed an error below 0.6% overestimation. Analysis of the structural parameters revealed a significant correlation between estimated and actual values of the volume of plants and fruit weight. These results show the potential of depth cameras to be used as a precise tool in estimating the degree of ripeness during the harvesting of cauliflower and thereby optimizing the crop profitability., The Spanish Ministry of Economy and Competitiveness has provided support for this research via projects: AGL2011-25243 and AGL2014-52465-C4-3-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Merge Fuzzy Visual Servoing and GPS-Based Planning to Obtain a Proper Navigation Behavior for a Small Crop-Inspection Robot

  • Bengochea Guevara, José M.
  • Conesa Muñoz, Jesús
  • Andújar, Dionisio
  • Ribeiro Seijas, Ángela
The concept of precision agriculture, which proposes farming management adapted to crop variability, has emerged in recent years. To effectively implement precision agriculture, data must be gathered from the field in an automated manner at minimal cost. In this study, a small autonomous field inspection vehicle was developed to minimise the impact of the scouting on the crop and soil compaction. The proposed approach integrates a camera with a GPS receiver to obtain a set of basic behaviours required of an autonomous mobile robot to inspect a crop field with full coverage. A path planner considered the field contour and the crop type to determine the best inspection route. An image-processing method capable of extracting the central crop row under uncontrolled lighting conditions in real time from images acquired with a reflex camera positioned on the front of the robot was developed. Two fuzzy controllers were also designed and developed to achieve vision-guided navigation. A method for detecting the end of a crop row using camera-acquired images was developed. In addition, manoeuvres necessary for the robot to change rows were established. These manoeuvres enabled the robot to autonomously cover the entire crop by following a previously established plan and without stepping on the crop row, which is an essential behaviour for covering crops such as maize without damaging them, The Spanish Government has provided full and continuing support for this research work through projects AGL2011-30442-C02–02 and AGL2014-52465-C4-3-R. The authors wish to thank Pedro Hernáiz and his team (ICA-CSIC) for their invaluable help in the field trials. The authors wish to acknowledge the invaluable technical support of Damian Rodriguez., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Germination behaviour of Conyza bonariensis to constant and alternating temperatures across different populations

  • Valencia-Gredilla, Francisco
  • Supiciche, María L.
  • Chantre, Guillermo R.
  • Recasens i Guinjuan, Jordi
  • Royo-Esnal, Aritz
Conyza bonariensis is one of the most problematic weed species throughout the world. It is considered highly noxious due to its interference with human activities, and especially the competition it poses with economically important crops. This research investigated the temperature requirements for seed germination of four populations of C. bonariensis with distinct origin and the influence of daily alternating temperatures. For this, a set of germination tests were performed in growth chambers to explore the effect of constant and alternating temperatures. Seeds of the four populations (from Lleida, Badajoz and Seville, Spain and Bahía Blanca, Argentina) were maintained at constant temperatures ranging from 5 to 35°C. The final germination and cardinal temperatures (base, optimum and maximum) of each population were obtained. We also tested the influence of daily alternating temperatures on final germination. To do so, seeds were exposed to two temperature regimes: 5/15, 10/20, 15/25, 20/30 and 25/35°C night/day temperature (intervals increasing 5°C, with constant oscillation of 10°C) and to 18/22, 16/24, 14/26, 12/28 and 10/30°C night/day temperature (intervals with average of 20°C, but increasing the oscillation in 4°C between intervals). In general, all populations behaved similarly, with the highest germination percentages occurring in the optimum temperature range (between 21.7°C and 22.3°C) for both constant and alternating temperatures. In general, climatic origin affected germination response, where seeds obtained from the coldest origin exhibited the highest germination percentage at the lowest temperature assayed. In addition, we observed that the alternating temperatures can positively affect total germination, especially in oscillations that were further from the average optimum temperature (20°C), with high germination percentage for the oscillations of 15/25, 20/30, 18/22, 16/24, 14/26, 12/28 and 10/30°C in all populations. The cardinal temperatures obtained were significantly different across the populations. These results provide information that will facilitate a better understanding of the behaviour of Conyza and improve current field emergence models., Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF), Grant/Award Numbers: AGL2017‐83325‐C4‐2‐R, AGL 2014‐52465‐C4‐2‐R
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Rigput brome (Bromus diandrus Roth.) management in a no tilled field in Spain

  • Royo-Esnal, Aritz
  • Recasens i Guinjuan, Jordi
  • Garrido, Jesús
  • Torra Farré, Joel
The adoption of no-till (NT) in the semi-arid region of Mediterranean Spain has promoted a weed vegetation change, where rigput brome (Bromus diandrus Roth) represents a main concern. In order to avoid complete reliance on herbicides, the combination of several control methods, without excluding chemical ones, can contribute to an integrated weed management (IWM) system for this species. In this field study, 12 three-year management programs were chosen, in which alternative non-chemical methods¿delay of sowing, crop rotation, sowing density and pattern, stubble removal¿are combined with chemical methods to manage B. diandrus in winter cereals under NT. Moreover, their effects on weed control and crop productivity were analyzed from the point of view of the efficiency of the control methods, based on a previously developed emergence model for B. diandrus. All management programs were effective in reducing the weed infestation, despite the different initial weed density between blocks. For high weed density levels (60-500 plants m􀀀2), two years of specific managements resulted in 99% reduction of its population. For even higher density levels, three years were needed to assure this reduction level. Both the emergence of the weed and the crop yields are mainly driven by the seasonal climatic conditions in this semi-arid area. For this reason, among the non-chemical methods, only crop rotation and sowing delay contributed to an effective weed population decrease as well as an increase in the economic income of the yield. The other alternative methods did not significantly contribute to controlling the weed. This work demonstrates that mid-term management programs combining chemical with non-chemical methods can effectively keep B. diandrus under control with economic gains compared to traditional field management methods in semi-arid regions., This research was funded by Bayer CropScience, grant number C14045, and the Economy Ministry of Spain, grant number AGL2014-52465-C4-2-R.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Different Ground Vegetation Cover Management Systems to Manage Cynodon dactylon in an Irrigated Vineyard

  • Valencia-Gredilla, Francisco
  • Royo-Esnal, Aritz
  • Juárez Escario, Alejandro
  • Recasens i Guinjuan, Jordi
Ground cover management in vineyards in Spain is focused on minimizing soil erosion and compaction. Such practices have influenced the weed community structure in the inter-rows, contributing to the spread of the high noxious weed Cynodon dactylon (L.) Pers. This fact highlights the need for further investigation of the interaction between ground cover practices and weed control techniques. In this study, the effect of four different ground cover managements (M) in the inter-rows on C. dactylon population dynamics (changes in coverage and frequency) was assessed over three seasons (2015–2017): (M1) a no-till spontaneous vegetation ground cover managed by shredding; (M2) a no-till spontaneous vegetation ground cover managed by shredding plus herbicide application, (M3) tilled soil and spontaneous vegetation growing; and (M4) tilled soil and a barley cover crop seeded (Hordeum vulgare L.). Cynodon dactylon and the other weeds responded differently to the various weed control methods. After three seasons, the barley cover crop was the most efficient management system to control C. dactylon and other weeds. Final soil cover in barley cover crop and tilled soil with spontaneous vegetation were 0.5% and 1.1%, respectively, compared to 3.7% and 7.7% obtained by spontaneous vegetation shredded with and without herbicide application, respectively. In addition, total weed frequency varied from 9.7% for barley cover crop to 45.8% for spontaneous vegetation only shredded. Weed community composition changed due to the pressure exerted by each management and the adaptive strategy of the different species. This study highlights the importance of knowledge of how vegetation management influences weed flora to improve the sustainability of wine grape production systems., This work was funded by the Spanish Ministry of Economy and Competitiveness (AGL2014-52465-C4-2-R and AGL2017-83325-C4-2-R). The first author obtained a PhD grant from the University of Lleida (PhD grants).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Dynamics of Cynodon dactylon and weed community composition in different cover crops in a vineyard

  • Recasens i Guinjuan, Jordi
  • Valencia-Gredilla, Francisco
  • Cabrera-Pérez, Carlos
  • Baraibar Padró, Bàrbara
  • Royo-Esnal, Aritz
The implementation of cover crops in vineyards is an environment-friendly soil management technique that has several advantages, including weed suppression. The effectiveness of the management depends on the characteristics of both the weed community and the cover crop species. The objectives of this study were to evaluate the dynamics of Cynodon dactylon patches and the rest of the weed community composition under five different cover crops (four grasses and one dicotyledonous species) in a commercial vineyard in Spain: (1) the perennial Festuca arundinacea and the annual species (2) Hordeum vulgare, (3) Vulpia ciliata, (4) a mixture of Bromus species and (5) Medicago rugosa. The annual species were sown in November every year after tillage (from 2015 to 2018) and shredded in June, while F. arundinacea was sown in 2015 and shredded in June and in November every year. Results showed that cover crop species affected C. dactylon soil coverage and frequency across the field. After three seasons, F. arundinacea and H. vulgare were the best cover crops which controlled C. dactylon, resulting in the lowest weed coverage of 4.6% and 3.0% respectively. Although the expansion of the weed was restrained by cover crops, the soil tillage prior to sowing the annual species spreads the rhizomes and stolons to weed free areas of the field. Canonical Correspondence Analysis (CCA) showed that the weed community composition varied depending on the cover crop species, revealing the importance of its management in the weed assemblage., The authors thank the Company Raventós—Codorníu and Raimat winery for allowing and supporting field experiments, as well as Maria Casamitjana for her support with the field work. This work was funded by the Spanish Research Agency (AEI) from the Ministry of Sciences and Innovation (AGL2014‐52465‐C4‐2‐R, AGL2017‐83325‐C4‐2‐R and PID2020‐113229RB‐C4‐2) and also LISA (Low Input Sustainable Agriculture, ref. COMRDI16‐1‐0031‐0). FV and CC obtained a PhD grant from University of Lleida. BB received funding from the postdoctoral fellowships program Beatriu de Pinós (Government of Catalonia) and by the Horizon 2020 program of research and innovation of the EU under the Marie Sklodowska‐Curie grant agreement No. 801370.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Efficiency, profitability and carbon footprint of different management programs under no-till to control herbicide resistant Papaver rhoeas

  • Recasens i Guinjuan, Jordi
  • Royo-Esnal, Aritz
  • Valencia-Gredilla, Francisco
  • Torra Farré, Joel
The present work examines the effects of different integrated weed management (IWM) programs on multiple herbicide-resistant Papaver rhoeas populations in terms of effectiveness, profitability and carbon footprint. With this aim a trial was established in a winter cereal field under no-till in North-Eastern Spain during three consecutive seasons. Four IWM programs with different intensification levels, from less (crop rotation, mechanical control, and no herbicides) to more intense (wheat monoculture with high chemical inputs), were established. The different strategies integrated in the four programs were efficient in managing the weed after three years, with increased effectiveness after management program intensification. Whereas low input program (which includes fallow season) represented less economic cost than the other programs, on average, no differences were observed on carbon foot print, considered as kg CO2eq kg−1 product, between the different programs, except in the crop rotation program due to the low pea yield obtained. The results from this study show that in the search for a balance between crop profitability and reduction of the carbon footprint while controlling an herbicide resistant population is challenging, and particularly under notill. In this scenario the short term priority should be to reduce the presence of multiple herbicide resistant biotypes integrating the different available chemical, cultural, and physical strategies., This work has been supported by the Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF) with project AGL2014-52465-C4-2-R. Dr. J. Torra obtained a Ramon y Cajal contract from the Spanish Ministry of Science, Innovation and Universities (RYC2018-023866-I). Mr. F. Valencia-Gredilla obtained a PhD grant from the University of Lleida.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Predictive phytotoxic value of water-soluble allelochemicals in plant extracts for choosing a cover crop or mulch for specific weed control

  • Puig, Carolina G.
  • Valencia-Gredilla, Francisco
  • Pardo-Muras, María
  • Souto, X. Carlos
  • Recasens i Guinjuan, Jordi
  • Pedrol, Nuria
Cover crops and mulches have become an alternative for soil management in vineyards due to the agronomic, environmental, and economic advantages, especially the possibility of weed control. Implicitly to this objective lies the idea of assessing the potential herbicide effect of the allelochemicals released by different cover crops and mulch species. With this objective, the present work evaluated the phytotoxic effects of 12 aqueous extracts of selected species with potential use as a cover crop or mulch: a Bromus species mixture (B. hordeaceus L. and B. rubens L.), Festuca arundinacea Schreb., Hordeum murinum L., H. vulgare L., Vulpia ciliata Dumort., Medicago rugosa Desr., M. sativa L., Trifolium subterraneum L., T. incarnatum L., Phacelia tanacetifolia Benth., Sinapis alba L., and Pinus sylvestris L., on the germination and early growth of three troublesome weeds (Conyza bonariensis (L.) Cronquist, Aster squamatus (Spreng.) Hieron, and Bassia scoparia (L.) A. J.). The different in vitro bioassays showed that aqueous extracts of some species significantly inhibited or reduced germination and root and shoot growth of the target weed species in a dose-response manner. Germination of A. squamatus and C. bonariensis was reduced by 100-80% by the different extracts applied at 50% concentration and completely blocked at 100% concentration, except for M. rugosa extract, to which both species showed less sensitivity. Root elongation of A. squamatus was inhibited under every extract and concentration, whereas C. bonariensis root growth showed only some tolerance to the crude extracts of F. arundinacea and P. sylvestris. Bassia scoparia was relatively tolerant to the aqueous plant extracts, except for T. subterraneum crude extract, which reduced total germination by 80%; otherwise, B. scoparia showed higher general sensitivity of shoot growth than the other two weed species. The chemical profiles of phenolic compounds of the aqueous extracts were obtained and identified by HPLC-DAD, the phenolic profiles of H. murinum, V. ciliata, and M. rugosa being reported in this work for the first time. Using stepwise regression, the influence of certain phenolic compounds from the aqueous extracts on the germination and early growth of weeds was predicted. Among other significant compounds, the flavonoid naringenin identified in T. subterraneum aqueous extract at 8.09 μg·mL-1 was predicted to underlie its specific phytotoxicity on B. scoparia germination. These results support the use of cover crops and mulches in weed management and can help to select the most suitable species to adopt according to the target weed species.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A LiDAR-Based System to Assess Poplar Biomass

  • Andújar, Dionisio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rueda-Ayala, Victor
  • Fernandez Quintanilla, C.
  • Ribeiro, Angela
  • Dorado, José
This study evaluated the capabilities of a LiDAR-based system to characterize poplar trees for biomass production. The precision of the system was assessed by analyzing the relationship between the distance records and biophysical parameters. The terrestrial laser scanner (TLS) system consisted of a 2D time-of-flight LiDAR sensor, a gimbal to dynamically stabilize the sensor and a RTK-GPS to georeference its location and, subsequently, the sensor data. The sensor and its stabilizer were fixed facing downwards, on a metal frame designed for this purpose. Then, it was mounted on an all-terrain vehicle to perform 2D scans in planes perpendicular to the travel direction. Distances between the sensor and the surrounding objects had a high spatial resolution, providing high density 3D point clouds. Results on the reliability of the LiDAR system to estimate plant height showed a significant relationship between the sensor readings and actual poplar height and biomass data. In addition, tree biomass and tree volume were properly estimated in the point cloud. Regression analysis showed significant estimates of 0.79 and 0.89 for biomass and volume, respectively. These results reveal the potential of the LiDAR sensor to estimate both, plant height and plant biomass. This sensor's capability, added to its relative low cost, fast reaction, and the high number of readings per second consolidate the ideal system for estimating the productivity of biomass in energy crops. http://link.springer.com/article/10.1007%2Fs10343-016-0369-1, This research was funded by the CICyT (Commision Interministerial de Ciencia y Tecnología, Spain), under Agreement No. AGL2011-25243 and AGL2014-52465-C4.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Predictive phytotoxic value of water-soluble allelochemicals in plant extracts for choosing a cover crop or mulch for specific weed control

  • González Puig, Carolina Beatriz
  • Valencia Gredilla, Francisco
  • Pardo Muras, María
  • Souto Otero, Jose Carlos
  • Recasens, Jordi
  • Pedrol Bonjoch, María Nuria
Cover crops and mulches have become an alternative for soil management in vineyards due to the agronomic, environmental, and economic advantages, especially the possibility of weed mme control. Implicitly to this objective lies the idea of assessing the potential herbicide effect of the allelochemicals released by different cover crops and mulch species. With this objective, the present work evaluated the phytotoxic effects of 12 aqueous extracts of selected species with potential use as a cover crop or mulch: a Bromus species mixture (B. hordeaceus L. and B. rubens L.), Festuca arundinacea Schreb., Hordeum murinum L., H. vulgare L., Vulpia ciliata Dumort., Medicago rugosa Desr., M. sativa L., Trifolium subterraneum L., T. incarnatum L., Phacelia tanacetifolia Benth., Sinapis alba L., and Pinus sylvestris L., on the germination and early growth of three troublesome weeds (Conyza bonariensis (L.) Cronquist, Aster squamatus (Spreng.) Hieron, and Bassia scoparia (L.) A. J.). The different in vitro bioassays showed that aqueous extracts of some species significantly inhibited or reduced germination and root and shoot growth of the target weed species in a dose-response manner. Germination of A. squamatus and C. bonariensis was reduced by 100-80% by the different extracts applied at 50% concentration and completely blocked at 100% concentration, except for M. rugosa extract, to which both species showed less sensitivity. Root elongation of A. squamatus was inhibited under every extract and concentration, whereas C. bonariensis root growth showed only some tolerance to the crude extracts of F. arundinacea and P. sylvestris. Bassia scoparia was relatively tolerant to the aqueous plant extracts, except for T. subterraneum crude extract, which reduced total germination by 80%; otherwise, B. scoparia showed higher general sensitivity of shoot growth than the other two weed species. The chemical profiles of phenolic compounds of the aqueous extracts were obtained and identified by HPLC-DAD, the phenolic profiles of H. murinum, V. ciliata, and M. rugosa being reported in this work for the first time. Using stepwise regression, the influence of certain phenolic compounds from the aqueous extracts on the cia germination and early growth of weeds was predicted. Among other significant compounds, the flavonoid naringenin identified in T. subterraneum aqueous extract at 8.09 µg·mL–1 was predicted to underlie its specific phytotoxicity on B. scoparia germination. These results support the use of cover crops and mulches in weed management and can help to select the most suitable species to adopt according to the target weed species., Ministerio de Economía y Competitividad | Ref. AGL2014-52465-C4-2-R, Agencia Estatal de Investigación | Ref. AGL2017-83325-C4-2-R, Centro para el Desarrollo Tecnológico y la Innovación (CDTI)