Skip to main content

RELACION ENTRE ARCILLAS FIBROSAS Y LAMINARES (MINERALES INTERMEDIOS): CRYSTALOQUIMICA Y PROPIEDADES.

CGL2016-77005-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Caracterización de minerales de arcilla y óxidos de hierro mediante espectroscopía de reflectancia difusa (VNIR–SWIR), Characterization of clay minerals and Fe oxides through diffuse reflectance spectroscopy (VNIR-SWIR)

  • Bascones López, Arturo
  • Suárez Barrios, Mercedes
  • García Meléndez, Eduardo
  • Colmenero Hidalgo, Elena
  • Quirós Carretero, Alicia
[ES] Se ha realizado el análisis mineralógico a través de las propiedades espectrales desarrolladas por muestras de suelos y sedimentos del borde noroccidental de la Cuenca del Duero. Las absorciones producidas por los óxidos y oxihidróxidos de hierro (hematites y goethita, principalmente) están localizadas en zonas del VNIR (400-1200 nm), mientras que las bandas de absorción presentes en los espectros del SWIR (1200-2500 nm) están relacionadas con la composición química de minerales arcillosos. Los espectros de reflectancia medidos en laboratorio han sido normalizados aplicando los métodos del Continuum Removal (CR) y la segunda derivada (SD). Este último puede resolver la superposición de bandas al cuantificar sutiles inflexiones de la curva. Esto ha permitido examinar las bandas de absorción por separado midiendo los parámetros geométricos desarrollados en ellas. La proporción de los minerales influye en la respuesta espectral y, por tanto, en los valores de los parámetros. Se han realizado correlaciones lineales entre estos valores y la proporción de las diferentes fases minerales obtenidas por difracción de rayos X. De los parámetros estudiados, la correlación entre la posición del centro de banda (BC) en la máxima absorción alrededor de longitudes de onda de 890-960 nm y la profundidad del rasgo de absorción a 470 nm (D470) ha permitido realizar una estimación relativa de la proporción de hematites/goethita. En cuanto a la distribución de los diferentes minerales de arcilla, se ha podido establecer una correlación entre la proporción de caolinita y la profundidad de las bandas de absorción a 1415 y 2210 nm, y en los rasgos de absorción cercanos a 1390 y 2160 nm, analizados en SD, [EN] The mineralogical analysis was carried out through the spectral properties developed by samples of soils and sediments from the northwestern edge of the Duero Basin. The absorptions produced by the oxides and Fe-oxyhydroxides (mainly hematite and goethite) are located in VNIR zones (400-1200 nm), while the absorption bands that are present in the SWIR spectra (1200-2500 nm) are related to the chemical composition of clay minerals. The reflectance spectra measured in the laboratory have been normalized by using the methods of Continuum Removal(CR) and the second derivative (SD). This last method can solve the band overlapping because it quantifies subtle drops in the curve. This has allowed the absorption bands to be examined separately by measurement of their geometrical parameters. The proportion of the minerals affects the spectral response and, accordingly, the values of the parameters. Linear correlations were conducted between these values and the proportion of the different mineral phases obtained by X-ray diffraction. In the studied parameters, the correlation between the band center (BC) position in the maximum absorption around the wavelengths at 890-960 nm and the absorption feature depth at 470 nm (D470) has enabled a relative estimation of the proportion of hematite/goethite. As for the distribution of the different clay minerals, a correlation has been established between the proportion of kaolinite and the absorption bands depth at 1415 and 2210 nm, and in the absorption features near 1390 and 2160 nm, analyzed in SD, SI, Trabajo financiado por los Proyectos CGL2016-77005-R y ESP2017-89045-R del Ministerio de Ciencia, Innovación y Universidades, y el Proyecto LE169G18 de la Junta de Castilla y León
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simulations of Theoretical 2D and 1D X-ray Diffraction Patterns of Pallygorskite

  • García-Rivas, Javier
  • Sánchez del Río, M.
  • García-Romero, Emilia
  • Suárez Barrios, Mercedes
Comunicaciones del Congreso SEM 2017, XXXVI Reunión Científica de la Sociedad Española de Mineralogía, Oviedo 4 -7 julio de 2017, Palygorskite is a modulated phyllosilicate mineral with a structure formed by 2:1 layer type polysomes which are linked by periodical inversions of the apical oxygen of the continuous tetrahedral sheet, and the octahedral sheets is the modulated component, having the following structural formula: Si8(Mg2Al2)O20(OH)2(OH2)4.4H2O. In the literature we can find several structural models of palygorskite, belonging all of them either to monoclinic (Bradley, 1940; 1963; Drits and Sokolova, 1971) or orthorhombic (Preisinger, 1963) groups. Christ et al., (1969) performed a comparative study of palygorskites from different localities, concluding that the structure of the samples studied varied from orthorhombic to monoclinic, stablishing two regions of interest comprised between 4.5 – 4.0 Å and 2.6 – 2.5 Å. Chisholm (1992) performed simulations of powder diffraction considering both a monoclinic C2/m space group and an orthorhombic Pbmn space group, defining a new region of interest, along with the ones defined by Christ et al., (1969), comprised between 3.3 – 3.05 Å. Interestingly, looking at the region comprised at 4.5 – 4.0 Å, hereafter referred to as “Chisholm zone”, one may visually determine whether the palygorskite is monoclinic or orthorhombic. Recent studies of the Rietveld refinement (Chiari et al., 2003; Giustetto and Chiari, 2004; Post and Heaney, 2008) agree that palygorskite is a mixture of, at least, two different phases a monoclinic and an orthorombic, as already proposed by Preisinger (1963) and Chisholm (1992) for some palygorskite samples., Financial support of CGL2016-77005-R MINECO project and BES-2013-065092 grant are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spanish palygorskites: geological setting, mineralogical, textural and crystal-chemical characterization

  • Suárez Barrios, Mercedes
  • García-Rivas, Javier
  • Morales Sánchez-Migallón, Juan
  • García-Romero, Emilia
A representative group of palygorskites from the six most important Spanish deposits and six other occurrences were studied comparing their mineralogy, textural features, crystal-chemistry, and surface properties. These palygorskites have different geological origin: (1) sedimentary in large Tertiary continental basins, (2) hydrothermally altered volcanic rocks in the southern Spanish Peninsula, also Tertiary in age; and (3) fault-hosted pure palygorskites. The most common impurities are quartz and carbonates, both calcite and dolomite, but also feldspar, illite, smectite, and sepiolite have been identified. The structural formulae obtained show great variability between samples, as well as with respect to the theoretical formula for palygorskite, as they range from magnesian to aluminous palygorskites. The most common fibre length ranges between 1 and 10 µm but the palygorskites of hydrothermal origin are much longer, with lengths over 10 µm. The shorter fibres give rise to tightened textures, while longer fibres usually generate more open textures. These properties, along with the degree of compaction, condition the porosity of the sample, which in turn influences its surface properties. The specific surface areas obtained range between 30 m2 g−1 and 263 m2 g−1, depending on the impurities content and on the texture and crystal-chemistry; the highest values correspond to Mg-rich palygorskite., Financial support for this work was provided byMINECO(CGL2016-77005-R). JavierGarcía- Rivas thanks the MINECO grant (BES-2013-065092)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identification and classification of mineralogical associations by VNIR-SWIR spectroscopy in the Tajo basin (Spain)

  • García-Rivas, Javier
  • Suárez Barrios, Mercedes
  • García-Romero, Emilia
  • García Meléndez, E.
41 soil samples were collected at the Tajo Basin (Spain), in an area where Mg-rich clays are benefitted, whit the aim of studying their spectral response in the Visible, Near Infrared (VNIR) – Short Wave Infrared (SWIR) range (350–2500 nm) in terms of mineralogical composition and exploring the possibility of using these data as the basis of a geological mapping through hyperspectral imaging in this wavenumber interval in future research. The samples, belonging to nine different stratigraphic units, were characterized by X-Ray diffraction and VNIR – SWIR laboratory reflectance spectroscopy. The mineralogical associations are formed by complex mixtures of carbonates, gypsum, quartz, feldspars, illite, and smectites in variable proportions depending on the stratigraphic unit. The samples were classified into different groups and subgroups according to their spectral response. The resulting groups allow to extrapolate certain type-spectra to different mineralogical associations corresponding to the stratigraphic units sampled within the area of study. This work is of upmost importance for future works through remote-sensing techniques using VNIR – SWIR imaging of the area. The classification of the samples in different groups, according to their spectral response, and their attribution to the different stratigraphic units sampled, according to their mineralogical content, could help improve the geological mapping of the area of study as well as detecting deposits of Mg-rich clays of economic interest., Financial support by the projects CGL2016-77005-R and ESP2017-89045-R of the Spanish Ministerio de Economía y Competitividad projects. Javier García-Rivas thanks the Spanish Ministerio de Economía y Competitividad for the BES-2013-065092 grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A structure-based argument for non-classical crystal growth in natural clay minerals

  • García-Romero, Emilia
  • Suárez Barrios, Mercedes
Evidence of crystallization by particle attachment in synthetic materials is described in numerous contributions. However, efforts to establish the contribution of the particle attachment mechanism to inorganic crystallization in natural environments have barely begun. Here, we show, for the first time, evidence that confirms oriented particle attachment as a crystal growth mechanism that is relevant in sedimentary environments. In these natural settings, oriented particle attachment operates during the formation of highly anisotropically structured clay minerals, which constitute one of the most extensively distributed groups of minerals in the Earth's crust. High-resolution transmission electron microscopy images show that the clay minerals aggregation process occurs in different manners. Smectites aggregate by semi-oriented attachment, while kaolinite, sepiolite and palygorskite aggregate by oriented attachment., The authors acknowledge Dr. Lurdes Fernandez-Díaz and Dr. Cristobal Viedma for their valuable comments and the MINECO CGL2016-77005R project for providing financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Geochemistry and Biomarker Analysis of the Bentonites from Esquivias (Toledo, Spain)

  • García-Rivas, Javier
  • Suárez Barrios, Mercedes
  • Torres, Trinidad
  • Sánchez-Palencia, Yolanda
  • García-Romero, Emilia
  • Ortiz, José E.
The Tajo Basin is one of the richest in Mg-clays known around the world. Mg-bentonites, kwon as pink clays and green clays, alter in the Intermediate Unit of the Miocene sediments. In this work, a new approach to the genesis of these bentonites is performed by studying for the first time the biomarkers present in these clays in relation to the mineralogy and geochemistry, as well as using discriminatory criteria between green and pink clays. Samples were collected at a quarry of Mg-bentonites, in the proximities of Esquivias (Toledo, Spain). Mineralogical characterization and semi-quantification (X-ray diffraction (XRD)) allowed a well-defined classification according to the mineralogical content of the samples to be established, differentiating four associations. Geochemical analyses are clearly linked to the mineralogy and provide criteria to differentiate the genesis of the materials studied. In this regard, green clays are interpreted as having a more detrital character than pink clays, which present a more authigenic character. Biomarkers (n-alkanes and n-alkanoic acids) were studied, not showing a clear link with the mineralogy as in the case of the geochemistry, but providing interesting information about the origin and degradation of the organic matter. Pink clays have higher contents in biomarkers than green clays, providing a discriminative criterion., This research was funded by the Spanish Ministerio de Economía y Competitividad project CGL2016-77005-R. The Spanish Ministerio de Economía y Competitividad is acknowledged for the funding of the predoctoral contract of Javier García-Rivas (BES-2013-065092)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comments on “Influence of thermally modified palygorskite on the viability of polycyclic aromatic hydrocarbon-degrading bacteria” by B. Biswas, B. Sarkar, and R. Naidy Applied Clay Science 134 (2016) 153–160, DOI 10.1016/j.clay.2016.07.003

  • Suárez Barrios, Mercedes
  • García-Romero, Emilia
Biswas et al. (2016) have recently reported “Influence of thermally modified palygorskite on the viability of polycyclic aromatic hydrocarbon-degrading bacteria”. This topic is very interesting because is related to a clay-mediated bioremediation technology and the authors investigated the compatibility of heat treated palygorskite products (100–900 °C) with a polycyclic aromatic hydrocarbons -degrading soil bacterium Burkholderia sartisoli. Nevertheless, the discussion of the results shows a lack of knowledge of the structure and thermal behaviour of palygorskite, and consequently, the conclusions reached are not correct., Financial support by MINECO (CGL2016-77005R) is acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Simulations of theoretical 2D and 1D X-Ray Diffraction patterns of palygorskite

  • García-Rivas, Javier
  • Sánchez del Río, M.
  • García-Romero, Emilia
  • Suárez Barrios, Mercedes
Trabajo presentado en la XXXVI Reunión de la Sociedad Española de Mineralogía, celebrada en Oviedo (España) del 4 al 7 de julio de 2017, Palygorskite is a modulated phyllosilicate mineral with a structure formed by 2:1 layer type polysomes which are linked by periodical inversions of the apical oxygen of the continuous tetrahedral sheet, and the octahedral sheets is the modulated component, having the following structural formula: Si8(Mg2Al2)O20(OH)2(OH2)4.4H2O. In the literature we can find several structural models of palygorskite, belonging all of them either to monoclinic (Bradley, 1940; 1963; Drits and Sokolova, 1971) or orthorhombic (Preisinger, 1963) groups. Christ et al., (1969) performed a comparative study of palygorskites from different localities, concluding that the structure of the samples studied varied from orthorhombic to monoclinic, stablishing two regions of interest comprised between 4.5 ¿ 4.0 Å and 2.6 ¿ 2.5 Å. Chisholm (1992) performed simulations of powder diffraction considering both a monoclinic C2/m space group and an orthorhombic Pbmn space group, defining a new region of interest, along with the ones defined by Christ et al., (1969), comprised between 3.3 ¿ 3.05 Å. Interestingly, looking at the region comprised at 4.5 ¿ 4.0 Å, hereafter referred to as ¿Chisholm zone¿, one may visually determine whether the palygorskite is monoclinic or orthorhombic. Recent studies of the Rietveld refinement (Chiari et al., 2003; Giustetto and Chiari, 2004; Post and Heaney, 2008) agree that palygorskite is a mixture of, at least, two different phases a monoclinic and an orthorombic, as already proposed by Preisinger (1963) and Chisholm (1992) for some palygorskite samples. The aim of this work is to perform theoretical simulations of the 2D and 1D diffraction patterns of palygorskite, according to the structural models proposed by Chisholm (1992), prior to their comparison with experimental data., Financial support of CGL2016-77005-R MINECO project and BES-2013-065092 grant are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Mineralogy and spectral response of tertiary-quaternary sediments from the esquivias area (Tajo Basin, Spain)

  • García-Rivas, Javier
  • Suárez Barrios, Mercedes
  • García-Romero, Emilia
  • García Meléndez, E.
  • Bascones, A.
Trabajo presentado a la XVI International Clay Conference (ICC), celebrada en Granada (España) del 17 al 21 de julio de 2017., The Tajo Basin is an intracratonic basin located in the centre of the Iberian Peninsula, originated by the alpine deformation and with its evolution was conditioned by the late variscan deformation. It was filled during the Tertiary by materials coming from the surrounding mountain ranges (Cordillera Ibérica, Sierra de Altomira, Sistema Central and Montes de Toledo). This basin is one of the most important deposits of the world of sepiolite and saponite, being particularly rare due to the high content in magnesic clays and to the lack of potential source rocks with high content in Mg. The spectral response of these magnesic clays in the NIR is discriminating, which enables their identification and mapping on the land surface by remote sensing. This work presents the preliminary results, concerning to the mineralogical composition and its relation with the spectral response in the NIR spectra, as a base for the study by remote sensing of this rich in Mg clays area. For this work, we have collected 48 superficial ground samples (~15 first centimetres) from an area of the Tajo Basin, at the south of Madrid, sampling the surface of formations both from the Tertiary (mainly Miocene) and from the Quaternary. Samples TES1 - TES7 were collected to the south of the locality of Borox (Toledo, Spain),. Samples TES8 - TES23 were collected along a pathway between the localities of Borox and Numancia de la Sagra, while samples TES24 - TES48 were collected along a different pathway between the same localities, approximately 1.5km to the south of the previous one. The mineralogical composition of the samples were obtained by X-Ray Diffraction (XRD) using a diffractometer with CuKα radiation, both powder and oriented aggregates and their treatments to study the clay fraction. A semi-quantification of these mineral phases was performed through the reflective power method. We obtained the spectral response, both with the original texture as well as powdered sample, using a spectroradiometer with artificial light at the laboratory. Statistic treatment was performed by using the SPSS software. The minerals identified in these samples were quartz, calcite, dolomite, gypsum, k-feldspar and plagioclase, along with several phyllosilicates such as smectite, illite, chlorite and kaolinite. Sepiolite was identified only in a sample close to Numancia de la Sagra. Regarding to the mineralogical composition, different associations have been defined: illitic, quart-feldspar, gypsum, and carbonatic associations. On the other way, the recorded spectra have been also classified in several groups according to the position and depth of the absorption bands and the maximum reflectance. A statistic treatment of mineralogical composition (proportion of each mineral and association type) and grouping of spectra had been made. The obtained results indicate that the spectra groping made could be extrapolate and help to identify and mapping the area in terms of mineralogical composition., this study was supported by BES-2013-065092 and CGL2016-77005-R projects (MINECO), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Cristaloquímica y Génesis de Arcillas Magnésicas

  • García-Rivas, Javier
Tesis llevada a cabo para conseguir el grado de Doctor por la Universidad de Salamanca.--2018-09-27.--Sobresaliente Cum Laude, [ES]Las arcillas magnésicas son un grupo de minerales de gran importancia económica a nivel mundial. Son unos recursos escasos que se encuentran restringidos a algunas cuencas sedimentarias como la Cuenca de Polatli (Turquía) y la Cuenca del Tajo (España). Este grupo de arcillas presenta una variabilidad composicional y estructural muy grande, incluyendo tanto filosilicatos laminares del grupo de las esmectitas, más concretamente saponita – estevensita, como filosilicatos modulados (sepiolita – palygorskita). Esta Tesis Doctoral se ha realizado mediante el formato de compendio de artículos, con 4 objetivos claramente diferenciados entre sí que pretenden ampliar el conocimiento sobre algunos aspectos concretos de las arcillas magnésicas: la realización de un estudio de detalle de la estructura de la palygorskita, la realización de un estudio genético de las bentonitas magnésicas de la Cuenca del Tajo, un estudio preliminar para determinar la viabilidad del uso de la espectroscopía VNIR – SWIR para la identificación de las arcillas magnésicas a través de técnicas de teledetección y la caracterización mineralógica y de las propiedades de superficie de sepiolita – palygorskita en relación con su composición química, textura y estructura., El estudio en detalle de la estructura de la palygorskita se realizó utilizando difracción de Rayos-X con radiación de sincrotrón tanto para polvo como para fibra orientada. Estos resultados experimentales se compararon con simulaciones teóricas de los patrones de difracción de polvo y de fibra orientada, en 2D y 1D, poniendo de manifiesto la existencia de unas diferencias significativas entre los resultados experimentales y los datos teóricos. Estas diferencias, que no pueden ser justificadas por la posible presencia de impurezas ni por el tratamiento de los datos realizado, indican que la estructura de la palygorskita no ha sido aún resuelta de una manera definitiva. La Cuenca del Tajo presenta una de las mayores concentraciones de arcillas magnésicas del mundo, pero presenta una problemática especial respecto a su génesis. El registro fósil y sedimentario de la cuenca indica unas condiciones de pH en las cuales no se daría la precipitación de estos minerales, al igual que las posibles áreas fuente tienen una composición granítica o metapelítica, de manera general, siendo en cualquier caso ricas en aluminosilicatos que no justifican el aporte de magnesio necesario para la formación de estos minerales. Esta problemática llevó a realizar un estudio genético de las bentonitas de la Cuenca del Tajo, obtenidas en una cantera en las proximidades de Esquivias, combinando el estudio mineralógico y geoquímico clásico con el análisis de biomarcadores realizado por primera vez sobre estos materiales. Las muestras se clasificaron en 4 asociaciones minerales de acuerdo a los datos de difracción de Rayos-X: bentonítica (incluyendo tanto arcillas verdes como arcillas rosas), carbonatada, illítica y arenosa. La geoquímica indica que tanto las asociaciones arenosa, illítica y las arcillas verdes presentan un carácter detrítico mientras que la asociación carbonatada y las arcillas rosas presentan un carácter autigénico. El análisis de los biomarcadores permite observar que dentro de las asociaciones minerales hay una serie de diferencias que llevan a interpretaciones diferentes de la génesis de materiales análogos, probablemente debido a procesos postsedimentarios que degradaron la materia orgánica. Sin embargo, estos análisis también proveen de información interesante como es en el caso de las arcillas rosas, ya que la interpretación del análisis de biomarcadores indica un posible ambiente reductor del medio, coincidente con la interpretación de los análisis geoquímicos. El gran interés económico de las arcillas magnésicas hace que sea de una gran utilidad la realización de estudios que permitan identificar depósitos de interés económico mediante técnicas de teledetección., Con el objetivo de determinar la viabilidad de la aplicación de estas técnicas en la prospección de arcillas magnésicas en la Cuenca del Tajo, se ha realizado un estudio preliminar de la respuesta espectral de muestras superficiales provenientes de las proximidades de la localidad de Esquivias en el rango VNIR – SWIR en el laboratorio. Las muestras se clasificaron en diferentes grupos y subgrupos de acuerdo a la morfología general de sus espectros y estos grupos resultaron corresponder a distintas asociaciones minerales. Así pues, la clasificación permite la asignación de los distintos grupos y subgrupos a las diferentes unidades estratigráficas muestreadas de acuerdo a su mineralogía promedio y posibilita la realización de una cartografía del área en términos de composición mineralógica mediante técnicas de teledetección. Es especialmente interesante remarcar que, pese a la pequeña cantidad que representan las arcillas magnésicas en superficie, estas se pueden identificar claramente en los espectros, demostrando la viabilidad de prospectarlas mediante teledetección. El interés económico de las arcillas magnésicas es debido a sus propiedades físico – químicas, principalmente su elevada superficie específica, y es especialmente interesante estudiarlas en relación con su composición química, textura y estructura. El estudio de estas propiedades en relación con los factores descritos se ha realizado con muestras de sepiolita – palygorskita, siendo las sepiolitas estudiadas de origen turco, concretamente de la Cuenca de Polatli, y las palygorskitas provenientes de diferentes puntos de la geografía española. El estudio de estos materiales muestra que las propiedades de superficie no dependen únicamente de la presencia de diferentes impurezas. La textura juega un papel importante puesto que puede aportar microporosidad textural, pero más allá de eso, la presencia de intercrecimientos de palygorskita dentro de sepiolita y viceversa, deducible tanto a través de los difractogramas como de los análisis cristaloquímicos, es determinante en este tipo de propiedades, ya que la existencia de uno u otro tipo de polisomas influye tanto en la microporosidad estructural debido a los túneles intracristalinos como en la superficie externa por la influencia de los canales superficiales, ya que ambos son mayores para los polisomas de sepiolita que para los de palygorskita., A los proyectos CGL2012-35475 y CGL2016-77005-R del MINECO por la financiación de esta labor investigadora, así como al contrato predoctoral BES- 2013-065092 del MINECO., Peer reviewed