Skip to main content

BIOMODIFICACION DE PAPELES PARA LA CONSTRUCCION DE DISPOSITIVOS MICROFLUIDICOS

CTQ2013-48995-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hydrodynamic and direct-current insulator-based dielectrophoresis (H-DC-iDEP) microfluidic blood plasma separation

  • Mohammadi, Mahdi
  • Madadi, Hojjat
  • Casals Terré, Jasmina|||0000-0002-1368-3950
  • Sellarès González, Jordi|||0000-0001-7525-3166
Evaluation and diagnosis of blood alterations is a common request for clinical laboratories, requiring a complex technological approach and dedication of health resources. In this paper, we present a microfluidic device that owing to a novel combination of hydrodynamic and dielectrophoretic techniques can separate plasma from fresh blood in a microfluidic channel and for the first time allows optical real-time monitoring of the components of plasma without pre- or post-processing. The microchannel is based on a set of dead-end branches at each side and is initially filled using capillary forces with a 2-mu L droplet of fresh blood. During this process, stagnation zones are generated at the dead-end branches and some red blood cells (RBCs) are trapped there. An electric field is then applied and dielectrophoretic trapping of RBCs is used to prevent more RBCs entering into the channel, which works like a sieve. Besides, an electroosmotic flow is generated to sweep the rest of the RBCs from the central part of the channel. Consequently, an RBC-free zone of plasma is formed in the middle of the channel, allowing real-time monitoring of the platelet behavior. To study the generation of stagnation zones and to ensure RBC trapping in the initial constrictions, two numerical models were solved. The proposed experimental design separates up to 0.1 mu L blood plasma from a 2-mu L fresh human blood droplet. In this study, a plasma purity of 99 % was achieved after 7 min, according to the measurements taken by image analysis.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Exploring the effects of treatments with carbohydrases to obtain a high-cellulose-content pulp from a non-wood alkaline pulp

  • Beltramino Heffes, Facundo
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Vidal Lluciá, Teresa|||0000-0001-6269-4114
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
In this work, treatments with a xylanase (X) and carbohydrases mixture (Cx) were 19 applied on a TCF bleached sisal pulp in order to obtain high-cellulose content fibers 20 applicable on a wide range of uses. A limit of ˜12% w/w final content in hemicelluloses 21 was found regardless of the enzymatic treatment assessed. An extraction with 4% and 22 9% w/v NaOH was performed for further hemicelluloses removal. We found that NaOH dose could be strongly reduced if combined with Cx or Cx+X treatments. Also, if necessary, a stronger reduction could be obtained with 9% w/v NaOH, which was found to be boosted in a 14% if performed after a treatment with Cx. An end-product with a low content in xylans (˜2.9% w/w) and in HexA (5.8 µmol/odp) was obtained. Pulp Fock solubility was also increased (˜30%) by enzymatic treatments. HPLC analysis of effluents provided useful information of enzymatic catalytic mechanisms
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Facilitating the selection of raw materials: evaluation of the effects of TCF and ECF bleaching sequences on different wood and non-wood pulps

  • Beltramino, Facundo
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
  • Vidal Lluciá, Teresa|||0000-0001-6269-4114
  • Valls Vidal, Cristina|||0000-0003-2307-1779
Properties of cellulosic raw materials are known to vary widely among different sources. The interest in the usage of non-conventional fibers makes necessary a better knowledge of the peculiarities of each source and their behavior under different bleaching processes. ECF and TCF bleached pulps (ISO brightness= 82%) from eucalyptus, flax and sisal as well as cotton linters were analyzed. Eucalyptus showed the highest zero-span tensile strength (1.1-1.2 N.m/g), higher than that of sisal (0.85-0.95 N.m/g) and flax (0.7-0.8 N.m/g) which were also found to be linearly correlated to their viscosity regardless of the cellulose source. Sisal and eucalyptus showed the largest hemicelluloses content (˜13-16 %) while cotton linters appeared as a high-cellulose content (97.7 %)source for high-quality fibers. ECF and TCF bleaching processes produced different effects on fibers, as the latter showed a slightly lower quality than the former, difference that may not be significant if the great environmental benefit of TCF bleaching is considered. Finally, fiber surface was examined using SEM microscopy for a more complete assessment of raw materials
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hydrodynamic and direct-current insulator-based dielectrophoresis (H-DC-iDEP) microfluidic blood plasma separation

  • Mohammadi, Mahdi
  • Madadi, Hojjat
  • Casals Terré, Jasmina
  • Sellarès González, Jordi
Evaluation and diagnosis of blood alterations is a common request for clinical laboratories, requiring a complex technological approach and dedication of health resources. In this paper, we present a microfluidic device that owing to a novel combination of hydrodynamic and dielectrophoretic techniques can separate plasma from fresh blood in a microfluidic channel and for the first time allows optical real-time monitoring of the components of plasma without pre- or post-processing. The microchannel is based on a set of dead-end branches at each side and is initially filled using capillary forces with a 2-mu L droplet of fresh blood. During this process, stagnation zones are generated at the dead-end branches and some red blood cells (RBCs) are trapped there. An electric field is then applied and dielectrophoretic trapping of RBCs is used to prevent more RBCs entering into the channel, which works like a sieve. Besides, an electroosmotic flow is generated to sweep the rest of the RBCs from the central part of the channel. Consequently, an RBC-free zone of plasma is formed in the middle of the channel, allowing real-time monitoring of the platelet behavior. To study the generation of stagnation zones and to ensure RBC trapping in the initial constrictions, two numerical models were solved. The proposed experimental design separates up to 0.1 mu L blood plasma from a 2-mu L fresh human blood droplet. In this study, a plasma purity of 99 % was achieved after 7 min, according to the measurements taken by image analysis., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Facilitating the selection of raw materials: evaluation of the effects of TCF and ECF bleaching sequences on different wood and non-wood pulps

  • Beltramino, Facundo
  • Roncero Vivero, María Blanca
  • Vidal Lluciá, Teresa
  • Valls Vidal, Cristina
Properties of cellulosic raw materials are known to vary widely among different sources. The interest in the usage of non-conventional fibers makes necessary a better knowledge of the peculiarities of each source and their behavior under different bleaching processes. ECF and TCF bleached pulps (ISO brightness= 82%) from eucalyptus, flax and sisal as well as cotton linters were analyzed. Eucalyptus showed the highest zero-span tensile strength (1.1-1.2 N.m/g), higher than that of sisal (0.85-0.95 N.m/g) and flax (0.7-0.8 N.m/g) which were also found to be linearly correlated to their viscosity regardless of the cellulose source. Sisal and eucalyptus showed the largest hemicelluloses content (˜13-16 %) while cotton linters appeared as a high-cellulose content (97.7 %)source for high-quality fibers. ECF and TCF bleaching processes produced different effects on fibers, as the latter showed a slightly lower quality than the former, difference that may not be significant if the great environmental benefit of TCF bleaching is considered. Finally, fiber surface was examined using SEM microscopy for a more complete assessment of raw materials, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Exploring the effects of treatments with carbohydrases to obtain a high-cellulose-content pulp from a non-wood alkaline pulp

  • Beltramino Heffes, Facundo
  • Valls Vidal, Cristina
  • Vidal Lluciá, Teresa
  • Roncero Vivero, María Blanca
In this work, treatments with a xylanase (X) and carbohydrases mixture (Cx) were 19 applied on a TCF bleached sisal pulp in order to obtain high-cellulose content fibers 20 applicable on a wide range of uses. A limit of ˜12% w/w final content in hemicelluloses 21 was found regardless of the enzymatic treatment assessed. An extraction with 4% and 22 9% w/v NaOH was performed for further hemicelluloses removal. We found that NaOH dose could be strongly reduced if combined with Cx or Cx+X treatments. Also, if necessary, a stronger reduction could be obtained with 9% w/v NaOH, which was found to be boosted in a 14% if performed after a treatment with Cx. An end-product with a low content in xylans (˜2.9% w/w) and in HexA (5.8 µmol/odp) was obtained. Pulp Fock solubility was also increased (˜30%) by enzymatic treatments. HPLC analysis of effluents provided useful information of enzymatic catalytic mechanisms, Postprint (author’s final draft)