Skip to main content

PROGRAMACION RESTRINGIDA DE OPERACIONES EN TALLERES HIBRIDOS INTEGRADOS SOBRE UNIDADES EN SECUENCIA. INDUSTRIA DEL AUTOMOVIL (ASPECTOS ECONOMICOS, JURIDICOS Y SOCIALES)

DPI2010-16759

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Planificación estratégica de la capacidad en una empresa del sector alimentación (Strategic multi-site capacity planning for a food industry)

  • Companys, Ramon
  • Ribas Vila, Immaculada|||0000-0002-3701-118X
  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
This paper describes the proposed procedure for the multi-site capacity planning of a food company that was obliged to move one of its production sites to a new location. Due to this change the managers of the company wanted to know the capacity requirement of the new site, the assigned products to this plant and the impact of these decisions over the other manufacturing sites. In brief, they wanted to know the efficient production map of the company for the next 3 - 5 years. The company had 6 manufacturing sites which produced about 100 products grouped in 22 families. Each family was associated to a production line. The most demanded products could be produced in several plants, at the same time, whereas some other products only on a certain site. Only one raw material was critical and with influence on the productive map, therefore, it was considered in the problem formulation. The plants sent their output to 5 regional centres which were in charge of supplying the demand of 38 distribution centres. This distribution centres, in turn, were in charge of serving the requirements of the points of sale. Therefore, the supply chain consisted of 4 levels: suppliers, plants, regional centres and distribution centres. The problem was formulated as a mathematical program. The main variables were the quantity to produce of each product at each plant, in a certain period of time, the quantity to be transported of each product from the manufacturing sites to the regional centres and the raw material supplied for each supplier to each plant. The mathematical constraints described the production constraints, the supply and transport constraints and the rules established by the company. The parameters were the availability of raw materials from each supplier, the minimum lot size of each product, the capacity of vehicles from transport the products, the demand of each product per distribution centre and the cost associated to suppliers, to the transport, with the set up of lines and the changeover cost in each line. The objective was to minimize the operating cost. The mathematical model had to allow simulating several scenarios of demand, capacity and configuration of plants. The system was implemented in three modules. The first module was a pre-processor to set the information and scenario to simulate with different hypothesis of demand, minimum lot size, and constraints. Next, the processor implemented in Lindo and finally, the postprocessor to summarize the obtained and to prepare and show several reports. Finally, the results and conclusions were presented to the steering committee. Our proposal was not the cheapest but was the one that demanded less inversion and changes. The implemented system was transferred to the company who continued with the study to take the final decision., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Models for MMSP-W considering workstation dependencies: a case study of Nissan’s Barcelona plant

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Cano Pérez, Alberto
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
In this article, we present two formulations and their unification for the Mixed-Model Sequencing Problem with Workload Minimisation (MMSP-W) for production lines with serial workstations and parallel homogeneous processors. The models were executed in Solver CPLEX, with reference instances and with a case study of Nissan’s Powertrain plant in Barcelona. Different situations were analysed to evaluate investments in projects designed to improve process and product design and reduce work overloads in the line at short-, intermediate- and long-term intervals., The authors greatly appreciate the collaboration of Nissan Spanish Industrial Operations (NSIO) and the Nissan Chair UPC for partially funding this research. This work was also partially funded by project PROTHIUS-III, DPI2010-16759, including EDRF funding from the Spanish government., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Extended models for TSALBP with ergonomic risk Constraints

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Batalla García, Cristina
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
  • Cano Pérez, Alberto
In this paper, we present an extension to the TSALB problem (Time and Space constrained Assembly Line Balancing) with ergonomic risk restrictions. This ergonomic risk is defined from the task durations and their categories regarding to the risk factor for the workers. A study is presented through a case linked to an engine assembly line in the Automobile industry, considering variable demand.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hybrid procedure based on Bounded Dynamic Programming and Linear Programming for solving a variant of the MMSP-W

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Cano Pérez, Alberto
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
  • Batalla García, Cristina
In this paper, we propose a hybrid procedure based on Bounded Dynamic Programming (BDP) and linear programming to solve the Mixed-Model Sequencing Problem with Workload Minimization (MMSP-W), with serial workstations, free interruption of the operations and production mix restrictions. We performed a computational experiment with 225 instances from the literature. The results of our proposal are compared with those obtained through the Gurobi solver and previous procedures., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Consideration of human resources in the Mixed-model Sequencing Problem with Work Overload Minimization: Legal provisions and productivity improvement

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
  • Batalla García, Cristina
Beginning with a variation of the sequencing problem in a mixed-products line (MMSP-W: Mixed-Model Sequencing Problem with Workload Minimization), we propose two new models that incorporate a set of working conditions in regard with human resources of workstations on the line. These conditions come from collective agreements and therefore must be respected by both company and labor unions. The first model takes into account the saturation limit of the workstations, and the second model also includes the activation of the operators throughout the working day. Two computational experiments were carried out using a case study of the Nissan motor plant in Barcelona with two main objectives: (1) to study the repercussions of the saturation limit on the decrease in productivity on the line and (2) to evaluate the recovery of productivity on the line via both activation of operators, while maintaining the same quality in working conditions achieved by limiting the saturation, and auxiliary processors. By results we state that saturation limitation leads an important increase of work overload, which means average economic losses of 28,731.8 Euros/day. However, the productivity reduction may be counteracted by the work pace factor increase, at certain moments of workday, and/or by the incorporation of auxiliary processors into the line.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Models for assembly line balancing by temporal, spatial and ergonomic risk attributes

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Batalla García, Cristina
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
Assembly lines with mixed products present ergonomic risks that can affect productivity of workers and lines. Because of that, the line balancing must consider the risk of injury in regard with the set of tasks necessary to process a product unit, in addition to other managerial and technological attributes such as the workload or the space. Therefore, in this paper we propose a new approach to solve the assembly line balancing problem considering temporal, spatial and ergonomic attributes at once. We formulate several mathematical models and we analyze the behavior of one of these models through case study linked to Nissan. Furthermore, we study the effect of the demand plan variations and ergonomic risk on the line balancing result, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Adaptive IDEA for robust multiobjective optimization. Application to the r-TSALBP-m/A

  • Chica Serrano, Manuel|||0000-0002-4717-1056
  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Cordón García, Oscar
  • Damas Arroyo, Sergio
Robust optimization tries to find flexible solutions when solving problems with uncertain scenarios and vague information. In this paper we present a multiobjective evolutionary algorithm to solve robust multiobjective optimization problems. This algorithm is a novel adaptive method able to evolve separate populations of robust and non-robust solutions during the search. It is based on the infeasibility driven evolutionary algorithm (IDEA) and uses an additional objective to evaluate the robustness of the solutions. The original and adaptive IDEAs are applied to solve the r-TSALBP-m/A, an assembly line balancing model that considers a set of demand production plans and includes robustness functions for measuring the temporal overloads of the stations of the assembly line with respect to the plans. Our results show that the proposed adaptive IDEA gets more robust non-dominated solutions for the problem. Also, we show that, for the case of the r-TSALBP-m/A, we can obtain Pareto fronts with a higher convergence by using the adaptive version of the algorithm.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Extended models for TSALBP with ergonomic risk Constraints

  • Bautista Valhondo, Joaquín
  • Batalla García, Cristina
  • Alfaro Pozo, Rocío
  • Cano Pérez, Alberto
In this paper, we present an extension to the TSALB problem (Time and Space constrained Assembly Line Balancing) with ergonomic risk restrictions. This ergonomic risk is defined from the task durations and their categories regarding to the risk factor for the workers. A study is presented through a case linked to an engine assembly line in the Automobile industry, considering variable demand., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Models for MMSP-W considering workstation dependencies: a case study of Nissan’s Barcelona plant

  • Bautista Valhondo, Joaquín
  • Cano Pérez, Alberto
  • Alfaro Pozo, Rocío
In this article, we present two formulations and their unification for the Mixed-Model Sequencing Problem with Workload Minimisation (MMSP-W) for production lines with serial workstations and parallel homogeneous processors. The models were executed in Solver CPLEX, with reference instances and with a case study of Nissan’s Powertrain plant in Barcelona. Different situations were analysed to evaluate investments in projects designed to improve process and product design and reduce work overloads in the line at short-, intermediate- and long-term intervals., The authors greatly appreciate the collaboration of Nissan Spanish Industrial Operations (NSIO) and the Nissan Chair UPC for partially funding this research. This work was also partially funded by project PROTHIUS-III, DPI2010-16759, including EDRF funding from the Spanish government., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Planificación estratégica de la capacidad en una empresa del sector alimentación (Strategic multi-site capacity planning for a food industry)

  • Companys, Ramon
  • Ribas Vila, Immaculada
  • Bautista Valhondo, Joaquín
This paper describes the proposed procedure for the multi-site capacity planning of a food company that was obliged to move one of its production sites to a new location. Due to this change the managers of the company wanted to know the capacity requirement of the new site, the assigned products to this plant and the impact of these decisions over the other manufacturing sites. In brief, they wanted to know the efficient production map of the company for the next 3 - 5 years. The company had 6 manufacturing sites which produced about 100 products grouped in 22 families. Each family was associated to a production line. The most demanded products could be produced in several plants, at the same time, whereas some other products only on a certain site. Only one raw material was critical and with influence on the productive map, therefore, it was considered in the problem formulation. The plants sent their output to 5 regional centres which were in charge of supplying the demand of 38 distribution centres. This distribution centres, in turn, were in charge of serving the requirements of the points of sale. Therefore, the supply chain consisted of 4 levels: suppliers, plants, regional centres and distribution centres. The problem was formulated as a mathematical program. The main variables were the quantity to produce of each product at each plant, in a certain period of time, the quantity to be transported of each product from the manufacturing sites to the regional centres and the raw material supplied for each supplier to each plant. The mathematical constraints described the production constraints, the supply and transport constraints and the rules established by the company. The parameters were the availability of raw materials from each supplier, the minimum lot size of each product, the capacity of vehicles from transport the products, the demand of each product per distribution centre and the cost associated to suppliers, to the transport, with the set up of lines and the changeover cost in each line. The objective was to minimize the operating cost. The mathematical model had to allow simulating several scenarios of demand, capacity and configuration of plants. The system was implemented in three modules. The first module was a pre-processor to set the information and scenario to simulate with different hypothesis of demand, minimum lot size, and constraints. Next, the processor implemented in Lindo and finally, the postprocessor to summarize the obtained and to prepare and show several reports. Finally, the results and conclusions were presented to the steering committee. Our proposal was not the cheapest but was the one that demanded less inversion and changes. The implemented system was transferred to the company who continued with the study to take the final decision., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Consideration of human resources in the Mixed-model Sequencing Problem with Work Overload Minimization: Legal provisions and productivity improvement

  • Bautista Valhondo, Joaquín
  • Alfaro Pozo, Rocío
  • Batalla García, Cristina
Beginning with a variation of the sequencing problem in a mixed-products line (MMSP-W: Mixed-Model Sequencing Problem with Workload Minimization), we propose two new models that incorporate a set of working conditions in regard with human resources of workstations on the line. These conditions come from collective agreements and therefore must be respected by both company and labor unions. The first model takes into account the saturation limit of the workstations, and the second model also includes the activation of the operators throughout the working day. Two computational experiments were carried out using a case study of the Nissan motor plant in Barcelona with two main objectives: (1) to study the repercussions of the saturation limit on the decrease in productivity on the line and (2) to evaluate the recovery of productivity on the line via both activation of operators, while maintaining the same quality in working conditions achieved by limiting the saturation, and auxiliary processors. By results we state that saturation limitation leads an important increase of work overload, which means average economic losses of 28,731.8 Euros/day. However, the productivity reduction may be counteracted by the work pace factor increase, at certain moments of workday, and/or by the incorporation of auxiliary processors into the line., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Adaptive IDEA for robust multiobjective optimization. Application to the r-TSALBP-m/A

  • Chica Serrano, Manuel
  • Bautista Valhondo, Joaquín
  • Cordón García, Oscar
  • Damas Arroyo, Sergio
Robust optimization tries to find flexible solutions when solving problems with uncertain scenarios and vague information. In this paper we present a multiobjective evolutionary algorithm to solve robust multiobjective optimization problems. This algorithm is a novel adaptive method able to evolve separate populations of robust and non-robust solutions during the search. It is based on the infeasibility driven evolutionary algorithm (IDEA) and uses an additional objective to evaluate the robustness of the solutions. The original and adaptive IDEAs are applied to solve the r-TSALBP-m/A, an assembly line balancing model that considers a set of demand production plans and includes robustness functions for measuring the temporal overloads of the stations of the assembly line with respect to the plans. Our results show that the proposed adaptive IDEA gets more robust non-dominated solutions for the problem. Also, we show that, for the case of the r-TSALBP-m/A, we can obtain Pareto fronts with a higher convergence by using the adaptive version of the algorithm., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Models for assembly line balancing by temporal, spatial and ergonomic risk attributes

  • Bautista Valhondo, Joaquín
  • Batalla García, Cristina
  • Alfaro Pozo, Rocío
Assembly lines with mixed products present ergonomic risks that can affect productivity of workers and lines. Because of that, the line balancing must consider the risk of injury in regard with the set of tasks necessary to process a product unit, in addition to other managerial and technological attributes such as the workload or the space. Therefore, in this paper we propose a new approach to solve the assembly line balancing problem considering temporal, spatial and ergonomic attributes at once. We formulate several mathematical models and we analyze the behavior of one of these models through case study linked to Nissan. Furthermore, we study the effect of the demand plan variations and ergonomic risk on the line balancing result, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hybrid procedure based on Bounded Dynamic Programming and Linear Programming for solving a variant of the MMSP-W

  • Bautista Valhondo, Joaquín
  • Cano Pérez, Alberto
  • Alfaro Pozo, Rocío
  • Batalla García, Cristina
In this paper, we propose a hybrid procedure based on Bounded Dynamic Programming (BDP) and linear programming to solve the Mixed-Model Sequencing Problem with Workload Minimization (MMSP-W), with serial workstations, free interruption of the operations and production mix restrictions. We performed a computational experiment with 225 instances from the literature. The results of our proposal are compared with those obtained through the Gurobi solver and previous procedures., Peer Reviewed, Postprint (published version)