Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Monitorización de las emisiones de gases de efecto invernadero y de la calidad del compost durante el co-compostaje de residuos de almazara a escala industrial: el efecto de las fuentes de N y C

  • García-Randez, Ana
  • Orden, Luciano
  • Marks, Evan A.N.
  • Andreu-Rodriguez, Javier
  • Franco-Luesma, Samuel
  • Martínez Sabater, Encarnación
  • Sáez-Tovar, José Antonio
  • Pérez-Murcia, María Dolores
  • Agulló, Enrique
  • Bustamante, María Angeles
  • Moral, Raúl
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
[EN] Olive mill wastes (OMW) management by composting allows to obtain valuable fertilizing products, but also implies significant fluxes of greenhouse gases (GHG). For a proper OMW composting, high C- and N co-substrates are necessary, but little is known concerning their effect on GHG emissions in OMW-industrial scale composting. In this study, different co-composting agents (cattle manure (CM), poultry manure (PM), sheep manure (SM) and pig slurry solid fraction (PSSF) as N sources and olive leaves (OLW) and urban pruning residues (UPR) as bulking agents and C sources) were used for OMW composting at industrial scale. Physico-chemical and chemical properties in the composting samples, and GHG (CO2, CH4 and N2O) fluxes were monitored in 12 industrial-scale windrows. GHG emissions were firstly influenced by N source, with the highest accumulated global warming potential (GWP) associated with PM (512 kg CO2eq pile-1), since PM composts were associated with the greatest N2O (0.33 kg pile-1) and CH4 emissions (15.67 kg pile-1). Meanwhile, PSSF was associated with the highest CO2 emissions (1113 kg pile-1). UPR as a bulking agent facilitated 10 % greater mineralization of the biomass than OLW, however this C-source was not associated with higher GHG emissions. The results showed that while mineralization dynamics may be impacted by C sources, GHG emissions were mainly conditioned by the characteristics of nutrient-heavy feedstocks (PM and SM). Moreover, manures as nitrogen-laden co-substrates had widely differing effects on total GWP, and that of individual gases, but further research is necessary to understand the mechanisms explaining such differences., This work has been developed thanks to the Agrocomposting Collaboration Agreement between the Generalitat Valenciana, through the Department of Agriculture, Rural Development, Climate Emergency and Ecological Transition and the Miguel Hernandez University of Elche. Grant EQC2018-004170-P funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. In addition, it was developed in the framework of the research project NEOCOMP (ref. PID2020-113228RB-I00) , funded by MCIN/AEI/10.13039/501100011033.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of Abiotic Treatments on Agricultural Plastic Waste: Efficiency of the Degradation Processes

  • Blesa Marco, Zbigniew Emil
  • Sáez-Tovar, José Antonio
  • Andreu-Rodríguez, Javier
  • Peñalver, Rosa
  • Rodríguez Pastor, Manuel
  • Eissenberger, Kristina
  • Cinelli, Patrizia
  • Bustamante, María A.
  • Moral, Raúl
In this study, four different plastic materials usually used in the agricultural sector (polystyrene film (PS), polyethylene terephthalate film (PET), low-density polyethylene film (LDPE) and linear low-density polyethylene film (LLDPE)) were subjected to different abiotic treatments, including photo-oxidation (ultraviolet and e-beam radiation) and thermochemical treatments, to enhance polymer degradation. The extensive use of these polymers leads to large amounts of plastic waste generation, including small plastic pieces, known as microplastics, which affect the quality of the agricultural environment, including soil fertility and quality. Therefore, polymer degradation strategies are needed to effectively reduce plastic waste to protect the agricultural sector. The degree of polymer degradation was assessed by the use of thermal and spectroscopic analyses, such as TGA and FTIR. In addition, efficiency, cost–benefits, and potential side-effects were also evaluated to propose the optimal degradation strategy to reduce plastic waste from the point of view of efficiency. The results obtained showed that the pre-treatments based on photo-oxidation (ultraviolet B and C and e-beam radiation) were more efficient and had a better cost–benefit for the degradation of the polymers studied in relation to the thermochemical treatments. Specifically, ultraviolet photo-oxidation worked well for PS and PET, requiring low energy and medium times. However, e-beam radiation was recommended for PE (LDPE and LLDPE) degradation, since high energy and long times were needed when ultraviolet energy was applied to this polymer. Furthermore, the overall efficiency of the plastic degradation of pre-treatments should be studied using a multicriteria approach, since FTIR assessments, in some cases, only consider oxidation processes on the plastic surface and do not show the potential integrity changes on the plastic probes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of agricultural microplastic and mesoplastic in the vermicomposting process: Response of Eisenia fetida and quality of the vermicomposts obtained

  • Blesa Marco, Zbigniew Emil
  • Sáez-Tovar, José Antonio
  • Pedraza Torres, Angie Marcela
  • Martínez Sabater, Encarnación
  • Orden, Luciano
  • Andreu-Rodríguez, Javier
  • Bustamante, María A.
  • Marhuenda Egea, Frutos Carlos
  • López, María J.
  • Suárez-Estrella, Francisca
  • Moral, Raúl
  • Marhuenda Egea, Frutos Carlos|||/items/90bc5484-0530-4d50-815c-cc12afc6127d
This work evaluates the effect of agricultural plastic waste (APW) in two particle sizes, microplastic and film debris, and subjected to a pre-treatment by exposure to UV-C, in the development of the vermicomposting process. Eisenia fetida health status and metabolic response and the vermicompost quality and enzymatic activity were determined. The environmental significant of this study is mainly related to how can affect plastic presence (depending on plastic type, size and/or if it is partially degraded) not only to this biological process of organic waste degradation, but also to the vermicompost characteristics, since these organic materials will be reintroduced in the environment as organic amendments and/or fertilizers in agriculture. The plastic presence induced a significant negative effect in survival and body weight of E. fetida with an average decrease of 10% and 15%, respectively, and differences on the characteristics of the vermicomposts obtained, mainly related with NPK content. Although the plastic proportion tested (1.25% f. w.) did not induce acute toxicity in worms, effects of oxidative stress were found. Thus, the exposure of E. fetida to AWP with smaller size or pre-treated with UV seemed to induce a biochemical response, but the mechanism of oxidative stress response did not seem to be dependent on the size or shape of plastic fragments or pre-treated plastic.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparative Study of Different Fertilisation Strategies on Lettuce Crop Production Including Remote Sensing Precision Agriculture Techniques: Effects on Soil Properties, Crop Yield and Greenhouse Gas Emissions

  • Sáez-Tovar, José Antonio
  • Orden, Luciano
  • Andreu-Rodríguez, Francisco Javier
  • Ros, Mario Velamazan
  • Martínez-Sabater, Encarnación
  • Bustamante, María Ángeles
  • Ros Muñoz, Margarita Matilde
  • Martínez-Tomé, Juan
  • Pérez-Murcia, María Dolores
  • Pascual, J. A.
  • Moral, Raúl
The sustainable production of leafy crops is particularly important in Mediterranean regions, where water scarcity and the nutrient unbalance in soil–plant systems are common. Intensive crop production under these edaphoclimatic conditions is typically basedon conventional agriculturewith high inputs and limited incorporation of organic matter, and has a significant impact on natural resources and greenhouse gas (GHG) emissions. This study evaluated various fertilisation strategies in a Calcaric Fluvisol under warm semi-arid conditions in south-east Spain. The experiment followed a completely randomised design with three replicates and five fertilisation treatments: (i) organic treatments (cattle manure [CM] and two agri-food waste derived composts [X1B and X2C]); (ii) inorganic treatments (mineral fertiliser NPK [IN] and NPK fertiliser with a nitrification inhibitor [LI2]), all of which were applied at a rate of 150 kg N ha<sup>−1</sup> during the lettuce crop cycle and soil plots without treatment were used as control treatment (B). GHG emissions and UAV-based multispectral vegetation indexes were measured after fertiliser applications and at the harvest, while soil properties and lettuce yield were determined at the end of the experiment. Mineral fertilisers produced the highest lettuce yields (73.8 and 82.4 Mg ha<sup>−1</sup> for IN and LI2, respectively), while X1B compost achieved a similar yield to IN. The organic fertilisation (X1B and X2C) significantly increased soil organic carbon (C), with X1B showing a 14% increase from initial values. They also resulted in the lowest total GHG emissions (19–26 kg ha<sup>−1</sup> CO<inf>2</inf>eq), compared to the inorganic treatments (68–67 kg ha<sup>−1</sup> CO<inf>2</inf>eq). UAV-derived vegetation indices distinguished between fertilisation strategies and correlated strongly with yield. Using compost-based organic fertilisation can sustain competitive lettuce yields while improving soil health, balancing nutrients and reducing GHG emissions. In water-limited Mediterranean systems, this approach provides a practical way to make agriculture more resilient and climate-smart, while ensuring productivity is aligned with environmental sustainability., This research was supported by the Ministry of Economy and Competitiveness of Spain and by ERDF A way of making Europe: Project AGL2013-41612-R and the grant EQC2018-004170-P funded by MCIN/AEI/ 10.13039/501100011033, Peer reviewed