Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A first insight into the microstructure and crack propagation in novel boron nitride nanosheet/3YTZP composites

  • Muñoz-Ferreiro, Carmen
  • Morales-Rodríguez, Ana
  • Gallardo-López, Ángela
  • Poyato, Rosalía
In this work, novel 3mol% yttria tetragonal zirconia polycristalline (3YTZP) ceramic composites with boron nitride nanosheets (BNNS) are investigated for the first time. Highly densified composites with 1 and 4vol% BNNS were obtained by spark plasma sintering (SPS) after BNNS synthesis using a solution exfoliation method and BNNS dispersion into the ceramic powder by ultrasonication. The BNNS presented homogeneous distribution throughout the ceramic matrix and preferential alignment in the plane perpendicular to the pressing axis during SPS. The BNNS incorporation had practically no effect on the Vickers hardness of the material nor on the Young's modulus. Anisotropy in crack development was found in the composite with 4%vol BNNS, together with a mechanism of extensive microcracking. Several energy-absorbing mechanisms during crack propagation, such as crack deflection, crack bridging, crack branching, BNNS pull-out and BNNS debonding, were identified in the composites by a close observation of the indentation-induced fracture paths.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrical performance of orthotropic and isotropic 3YTZP composites with graphene fillers

  • López-Pernía, Cristina
  • Muñoz, Ferreiro, Carmen
  • Moriche, R.
  • Morales-Rodríguez, Ana
  • Gallardo-López, Ángela
  • Poyato, Rosalía
3 mol% yttria tetragonal zirconia polycrystal (3YTZP) composites with orthotropic or isotropic microstructures were obtained incorporating few layer graphene (FLG) or exfoliated graphene nanoplatelets (e-GNP) as fillers. Electrical conductivity was studied in a wide range of contents in two configurations: perpendicular (σꓕ) and parallel (σ//) to the pressing axis during spark plasma sintering (SPS). Isotropic e-GNP composites presented excellent electrical conductivity for high e-GNP contents (σꓕ ∼ 3200 S/m and σ// ∼ 1900 S/m for 20 vol% e-GNP), consequence of their misoriented distribution throughout the matrix. Optimum electrical performance was achieved in the highly anisotropic FLG composites, with high electrical conductivity for low contents (σꓕ ∼ 680 S/m for 5 vol%), percolation threshold below 2.5 vol% FLG and outstanding electrical conductivity for high contents (σꓕ ∼ 4000 S/m for 20 vol%), result of the high aspect ratio and low thickness of FLG., This research was supported by project PGC2018–101377-B-100 funded by MCIN/AEI/ 10.13039/501100011033 (Ministerio de Ciencia e Innovación, Spanish Government, Agencia Estatal de Investigación) and ERDF (European Regional Development Funding) “A way of making Europe”, by the European Union and by project P20_01024 (Junta de Andalucía/FEDER, UE 2014–2020). C. López-Pernía acknowledges the financial support of MINECO (Ministerio de Economía y Competitividad, Spanish Government) through the FPI contract ref: BES-2016- 078711. C. Muñoz-Ferreiro acknowledges the financial support of a VI PPIT-US (Plan Propio Universidad de Sevilla, Spain) fellowship through the contract USE-18740-H., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

BN nanosheets reinforced zirconia composites: An in-depth microstructural and mechanical study

  • Muñoz-Ferreiro, Carmen
  • Reveron, Helen
  • Rojas, T. Cristina
  • Reyes, D.F.
  • Dankic-Cottrino, Sandrine
  • Moreno, P.
  • Prada-Rodrigo, J.
  • Morales-Rodríguez, Ana
  • Chêvalier, J.
  • Gallardo-López, A.
  • Poyato, Rosalía
This paper deals with the effect of hydroxylated boron nitride nanosheets (BNNS) incorporation on the microstructural and mechanical features of zirconia ceramics. Few-layered BNNS were synthesized via a simple hydroxide-assisted planetary ball milling exfoliation technique. 3 mol% yttria tetragonal zirconia polycrystal (3Y-TZP) with 2.5 vol% BNNS powders were prepared by an environmentally friendly process in water, and spark-plasma sintered at three temperatures to explore the in-situ reduction of the functionalized BNNS. An exhaustive study by (S)TEM techniques was performed to elucidate the influence of the sintering temperature on the matrix and the 3Y-TZP/BNNS interfaces, revealing that BNNS were homogeneously distributed throughout the matrix with an abrupt transition at 3Y-TZP/BNNS interfaces. BNNS effectively hindered slow crack growth, thus increasing the composite's crack growth resistance by about 30 %. A 1 MPa·m rising R-curve was also induced by crack bridging., This research was supported by projects PGC2018–101377-B-100 and PID2022–140191NB-I0 funded by MCIN/AEI/ 10.13039/501100011033 (Ministerio de Ciencia e Innovación, Spanish Government, Agencia Estatal de Investigación) and by ERDF (European Regional Development Funding) “A way of making Europe”, and by project P20_01024 (Junta de Andalucía/FEDER, UE 2014–2020). C. Muñoz-Ferreiro acknowledges the financial support of a VI PPIT-US (Plan Propio Universidad de Sevilla, Spain) fellowship through the contract USE-18740-H. Daniel F. Reyes would like to thank the University of Cádiz and the Ministry of Universities for the award of the grant “Recualificación del Profesorado” (UCA/R155REC/2021), funded by the Ministry of Universities of the Spanish Government through the European Recovery Instrument (Order UNI/551/2021). We would also like to thank the central services of the University of Cádiz (DME-SC-ICyT-ELECMI-UCA) for the support offered to obtain the TEM measurements. P. Moreno and J. Prada-Rodrigo also acknowledge the support of Ministerio de Ciencia e Innovación (PID2020-119003GB-I00)., Peer reviewed
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

BN nanosheets reinforced zirconia composites: An in-depth microstructural and mechanical study

  • Muñoz Ferreiro, C.
  • Reveron, H.
  • Rojas, T. C.
  • Fernández de los Reyes, Daniel
  • Cottrino, S.
  • Moreno, P.
  • Prada Rodrigo, J.
  • Morales Rodríguez, A.
  • Chevalier, J.
  • Gallardo López, Á.
  • Poyato, R.
This paper deals with the effect of hydroxylated boron nitride nanosheets (BNNS) incorporation on the microstructural and mechanical features of zirconia ceramics. Few-layered BNNS were synthesized via a simple hydroxide-assisted planetary ball milling exfoliation technique. 3 mol% yttria tetragonal zirconia polycrystal (3Y-TZP) with 2.5 vol% BNNS powders were prepared by an environmentally friendly process in water, and spark-plasma sintered at three temperatures to explore the in-situ reduction of the functionalized BNNS. An exhaustive study by (S)TEM techniques was performed to elucidate the influence of the sintering temperature on the matrix and the 3Y-TZP/BNNS interfaces, revealing that BNNS were homogeneously distributed throughout the matrix with an abrupt transition at 3Y-TZP/BNNS interfaces. BNNS effectively hindered slow crack growth, thus increasing the composite’s crack growth resistance by about 30 %. A 1 MPa⋅m1/2 rising R-curve was also induced by crack bridging.