Skip to main content

PROCESOS OPTICOS ULTRA-RAPIDOS EN NANOMATERIALES ESTRUCTURADOS Y SUS INTERACCIONES CON ELECTRONES LIBRES

PID2020-112625GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre INSTITUTO DE CIENCIAS FOTONICAS

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sub-nanometer mapping of strain-induced band structure variations in planar nanowire core-shell heterostructures

  • Martí-Sànchez, Sara
  • Botifoll, Marc
  • Oksenberg, Eitan
  • Koch, Christian
  • Borja, Carla
  • Spadaro, Maria Chiara
  • Giulio, Valerio di
  • Ramasse, Quentin M.
  • García de Abajo, F. Javier
  • Joselevich, Ernesto
  • Arbiol, Jordi
Strain relaxation mechanisms during epitaxial growth of core-shell nanostructures play a key role in determining their morphologies, crystal structure and properties. To unveil those mechanisms, we perform atomic-scale aberration-corrected scanning transmission electron microscopy studies on planar core-shell ZnSe@ZnTe nanowires on α-Al2O3 substrates. The core morphology affects the shell structure involving plane bending and the formation of low-angle polar boundaries. The origin of this phenomenon and its consequences on the electronic band structure are discussed. We further use monochromated valence electron energy-loss spectroscopy to obtain spatially resolved band-gap maps of the heterostructure with sub-nanometer spatial resolution. A decrease in band-gap energy at highly strained core-shell interfacial regions is found, along with a switch from direct to indirect band-gap. These findings represent an advance in the sub-nanometer-scale understanding of the interplay between structure and electronic properties associated with highly mismatched semiconductor heterostructures, especially with those related to the planar growth of heterostructured nanowire networks., J.A., S.M.-S., M.B., and M.C.S. were supported by the Severo Ochoa program from Spanish MCIN/AEI /10.13039/501100011033/ (Grant No. SEV-2017-0706) and are funded by the CERCA Program / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. J.A., S.M.-S., M.B., and M.C.S. acknowledge funding from Generalitat de Catalunya 2017SGR327. S.M.S. acknowledges funding from ICN2 SO EXEM project. The HAADF-STEM microscopy was conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon-Universidad de Zaragoza. Additional imaging and electron energy loss spectroscopy was carried out at SuperSTEM, the UK National Research Facility for Advanced Electron Microscopy, supported by the Engineering and Physical Sciences Research Council (EPSRC). Authors acknowledge the LMA-INMA for offering access to their instruments and expertise. We acknowledge support from CSIC Research Platform on Quantum Technologies PTI-001 (QTEP). M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref. 2020 FI 00103. C.K. acknowledges funding from InPhINIT Scholarships LaCaixa Foundation. M.C.S. have received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 754510 (PROBIST). J.G.d.A. has been supported by European Research Council (Advanced Grant 789104-eNANO). V.D.G. and J.G.d.A have received funding from Spanish MCINN (PID2020-112625GB-I00 and CEX2019-000910-S), Fundació Cellex, Fundació Mir-Puig, and Generalitat de Catalunya (CERCA, AGAUR). E.J. acknowledges support from the Israel Science Foundation (Grant No. 2444/19). J.A., S.M.-S., M.B. and M.C.S. were supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), by Generalitat de Catalunya and by “ERDF A way of making Europe”, by the “European Union”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly directional single-photon source

  • Manjavacas, Alejandro
  • García de Abajo, Francisco Javier
8 pags., 4 figs., Single-photon emitters are a pivotal element in quantum technologies, but the generation of single photons along well-defined directions generally involves sophisticated configurations. Here, we propose a photon source capable of generating single photons with high efficiency along guided modes. Specifically, we consider a quantum emitter placed in a periodically patterned linear waveguide. The latter is designed to host a single guided mode over the spectral range of interest and display a divergence in the photonic density of states at an emission wavelength close to the period. Photons are preferentially emitted along the waveguide near that spectral region. We predict that nearly all of the emission can be made to occur along the waveguide with a reduction in the temporal uncertainty by two orders of magnitude. Our study opens a conceptually new direction in the production of single photons with a high degree of directionality and reduced temporal uncertainty., This work was supported by the European Research Council (Advanced grant 789104-eNANO), the Spanish MCIN/AEI/10.13039/ 501100011033 (PID2020-112625GB-I00, PID2019-109502GA-I00, and Severo Ochoa CEX2019-000910-S), the Catalan CERCA Program, Fundaciós Cellex and Mir-Puig, a 2022 Leonardo Grant for Researchers in Physics (BBVA Foundation), and the U.S. National Science Foundation (Grant No. DMR-1941680)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultraconfined plasmons in atomically thin crystalline silver nanostructures

  • Mkhitaryan, Vahagn
  • Weber, Andrew P.
  • Abdullah, Saad
  • Fernández, Laura
  • Abd El-Fattah, Zakaria M.
  • Piquero-Zulaica, Ignacio
  • Agarwal, Hitesh
  • García Díez, Kevin
  • Schiller, Frederik
  • Ortega, J. Enrique
  • García de Abajo, Francisco Javier
The ability to confine light down to atomic scales is critical for the development of applications in optoelectronics and optical sensing as well as for the exploration of nanoscale quantum phenomena. Plasmons in metallic nanostructures with just a few atomic layers in thickness can achieve this type of confinement, although fabrication imperfections down to the subnanometer scale hinder actual developments. Here, narrow plasmons are demonstrated in atomically thin crystalline silver nanostructures fabricated by prepatterning silicon substrates and epitaxially depositing silver films of just a few atomic layers in thickness. Specifically, a silicon wafer is lithographically patterned to introduce on-demand lateral shapes, chemically process the sample to obtain an atomically flat silicon surface, and epitaxially deposit silver to obtain ultrathin crystalline metal films with the designated morphologies. Structures fabricated by following this procedure allow for an unprecedented control over optical field confinement in the near-infrared spectral region, which is here illustrated by the observation of fundamental and higher-order plasmons featuring extreme spatial confinement and high-quality factors that reflect the crystallinity of the metal. The present study constitutes a substantial improvement in the degree of spatial confinement and quality factor that should facilitate the design and exploitation of atomic-scale nanoplasmonic devices for optoelectronics, sensing, and quantum-physics applications., This work had been partly supported by the European Research Council (Advanced Grant No. 789104-eNANO), the Spanish Ministry of Science and Innovation (PID2020-112625GB-I00 and CEX2019-000910-S), the Generalitat de Catalunya (CERCA and AGAUR), the Basque Government (IT1591-22), and the Fundaciós Cellex and Mir-Puig., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000910-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal radiation forces on planar structures with asymmetric optical response

  • Deop-Ruano, Juan R.
  • García de Abajo, F. Javier
  • Manjavacas, Alejandro
7 pags., 4 figs., Light carries momentum and, upon interaction with material structures, can exert forces on them. Here, we show that a planar structure with asymmetric optical response is spontaneously accelerated when placed in an environment at a different temperature. This phenomenon originates from the imbalance in the exchange rates of photons between both sides of the structure and the environment. Using a simple theoretical model, we calculate the force acting on the planar structure and its terminal velocity in vacuum, and analyze their dependence on the initial temperature and the geometrical properties of the system for different realistic materials. Our results unravel an alternative approach to manipulating objects in the nano and microscale that does not require an external source of radiation., This work has been supported in part by projects PID2019-109502GA-I00, PID2022-137569NB-C42, PID2020-112625GB-I00, and Severo Ochoa CEX2019-000910-S funded by MCIN/AEI/10.13039/501100011033/FEDER, UE, the Catalan CERCA program, and Fundacios Cellex and MirPuig. J.R.D-R. acknowledges support from a predoctoral fellowship from the MCIN/AEI assigned to PID2019-109502GAI00., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Toward complete optical coupling to confined surface polaritons

  • Abdullah, Saad
  • Dias, Eduardo José Machado Correia Brioso|||0000-0002-6347-5631
  • Krpenský, Jan
  • Mkhitaryan, Vahagn
  • García de Abajo, Francisco Javier
Optical coupling between propagating light and confined surface polaritons plays a pivotal role in the practical design of nanophotonic devices. However, the coupling efficiency decreases dramatically with the degree of mode confinement due to the mismatch that exists between the light and polariton wavelengths, and despite the intense efforts made to explore different mechanisms proposed to circumvent this problem, the realization of a flexible scheme to efficiently couple light to polaritons remains a challenge. Here, we experimentally demonstrate an efficient coupling of light to surface–plasmon polaritons assisted by engineered dipolar scatterers placed at an optimum distance from the surface. Specifically, we fabricate gold disks separated by a silica spacer from a planar gold surface and seek to achieve perfect coupling conditions by tuning the spacer thickness for a given scatterer geometry that resonates at a designated optical frequency. We measure a maximum light-to-plasmon coupling cross section of the order of the square of the light wavelength at an optimum distance that results from the interplay between a large particle-surface interaction and a small degree of surface-driven particle-dipole quenching, both of which are favored at small separations. Our experiments, in agreement with both analytical theory and electromagnetic simulations, support the use of optimally placed engineered scatterers as a disruptive approach to solving the long-standing problem of in/out-coupling in nanophotonics., This work has been partly supported by the European Research Council (AdvancedGrant no. 789104-eNANO), the SpanishMinistry of Science and Innovation (PID2020 112625GB-I00 andCEX2019-000910-S), theGeneralitat de Catalunya(CERCAandAGAUR), andtheFundaciósCellex andMir-Puig. J.K. acknowledges an ERASMUS mobility project., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Synthesis of tailored nanostructured gold surfaces for SERS applications by controlled seed deposition and growth

  • Giardino, Matteo
  • Mannelli, Ilaria|||0000-0001-5322-839X
  • Renwen, Yu
  • García de Abajo, Francisco Javier
  • Pruneri, Valerio
  • Janner, Davide
Surface-enhanced Raman spectroscopy (SERS) sensors are commonly based on metal nanoparticles in colloidal suspension followed by deposition on a substrate. Despite its simplicity, this approach leads to non-uniform SERS substrates that are hampered by features such as coffee rings. Seed-mediated growth starting from nanoparticles already deposited on a flat substrate potentially allows for creating more uniform and reliable sensors. However, the deposition process, the control of the distribution of the seed nanoparticles, and their optimal growth have not been thoroughly explored. In this work, we present a systematic approach to designing and fabricating gold nanostructured surfaces, tailoring their SERS responses on demand. By controlling and tuning the deposition of nanoparticles, assisted by an experimental and theoretical investigation, we achieved good control over the spatial distribution of the deposited seeds. After enlarging such seeds through chemical reduction, the optimized SERS substrates show great uniformity in their hotspots, a critical feature for sensors. The so-fabricated substrates were used for detecting Skatole in water, achieving a detection limit of 42.2 ppt. The developed methodology has significant implications for the advancement of several fields, particularly SERS-based sensing, enabling the design and targeting of specific excitation wavelengths and Raman bands while obtaining uniform and reliable substrates., This work has been supported in part by the European Research Council (Advanced Grant 789104-eNANO), the Spanish MICINN (PID2020-112625 GB-I00 and Severo Ochoa CEX2019-000910-S), the Catalan CERCA Program, and Fundaciós Cellex and Mir-Puig., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Synthesis of tailored nanostructured gold surfaces for SERS applications by controlled seed deposition and growth

  • Giardino, Matteo
  • Mannelli, Ilaria
  • Renwen, Yu
  • García de Abajo, Francisco Javier
  • Pruneri, Valerio
  • Janner, Davide
Surface-enhanced Raman spectroscopy (SERS) sensors are commonly based on metal nanoparticles in colloidal suspension followed by deposition on a substrate. Despite its simplicity, this approach leads to non-uniform SERS substrates that are hampered by features such as coffee rings. Seed-mediated growth starting from nanoparticles already deposited on a flat substrate potentially allows for creating more uniform and reliable sensors. However, the deposition process, the control of the distribution of the seed nanoparticles, and their optimal growth have not been thoroughly explored. In this work, we present a systematic approach to designing and fabricating gold nanostructured surfaces, tailoring their SERS responses on demand. By controlling and tuning the deposition of nanoparticles, assisted by an experimental and theoretical investigation, we achieved good control over the spatial distribution of the deposited seeds. After enlarging such seeds through chemical reduction, the optimized SERS substrates show great uniformity in their hotspots, a critical feature for sensors. The so-fabricated substrates were used for detecting Skatole in water, achieving a detection limit of 42.2 ppt. The developed methodology has significant implications for the advancement of several fields, particularly SERS-based sensing, enabling the design and targeting of specific excitation wavelengths and Raman bands while obtaining uniform and reliable substrates., This work has been supported in part by the European Research Council (Advanced Grant 789104-eNANO), the Spanish MICINN (PID2020-112625 GB-I00 and Severo Ochoa CEX2019-000910-S), the Catalan CERCA Program, and Fundaciós Cellex and Mir-Puig., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Toward complete optical coupling to confined surface polaritons

  • Abdullah, Saad
  • Dias, Eduardo José Machado Correia Brioso
  • Krpenský, Jan
  • Mkhitaryan, Vahagn
  • García de Abajo, Francisco Javier
Optical coupling between propagating light and confined surface polaritons plays a pivotal role in the practical design of nanophotonic devices. However, the coupling efficiency decreases dramatically with the degree of mode confinement due to the mismatch that exists between the light and polariton wavelengths, and despite the intense efforts made to explore different mechanisms proposed to circumvent this problem, the realization of a flexible scheme to efficiently couple light to polaritons remains a challenge. Here, we experimentally demonstrate an efficient coupling of light to surface–plasmon polaritons assisted by engineered dipolar scatterers placed at an optimum distance from the surface. Specifically, we fabricate gold disks separated by a silica spacer from a planar gold surface and seek to achieve perfect coupling conditions by tuning the spacer thickness for a given scatterer geometry that resonates at a designated optical frequency. We measure a maximum light-to-plasmon coupling cross section of the order of the square of the light wavelength at an optimum distance that results from the interplay between a large particle-surface interaction and a small degree of surface-driven particle-dipole quenching, both of which are favored at small separations. Our experiments, in agreement with both analytical theory and electromagnetic simulations, support the use of optimally placed engineered scatterers as a disruptive approach to solving the long-standing problem of in/out-coupling in nanophotonics., This work has been partly supported by the European Research Council (AdvancedGrant no. 789104-eNANO), the SpanishMinistry of Science and Innovation (PID2020 112625GB-I00 andCEX2019-000910-S), theGeneralitat de Catalunya(CERCAandAGAUR), andtheFundaciósCellex andMir-Puig. J.K. acknowledges an ERASMUS mobility project., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sub-nanometer mapping of strain-induced band structure variations in planar nanowire core-shell heterostructures

  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Botifoll, Marc|||0000-0002-4876-6393
  • Oksenberg, Eitan|||0000-0001-9462-3986
  • Koch, Christian|||0000-0002-2655-7363
  • Borja, Carla
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Di Giulio, Valerio
  • Ramasse, Quentin|||0000-0001-7466-2283
  • García de Abajo, F. Javier
  • Joselevich, Ernesto|||0000-0002-9919-0734
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Strain relaxation mechanisms during epitaxial growth of core-shell nanostructures play a key role in determining their morphologies, crystal structure and properties. To unveil those mechanisms, we perform atomic-scale aberration-corrected scanning transmission electron microscopy studies on planar core-shell ZnSe@ZnTe nanowires on α-AlO substrates. The core morphology affects the shell structure involving plane bending and the formation of low-angle polar boundaries. The origin of this phenomenon and its consequences on the electronic band structure are discussed. We further use monochromated valence electron energy-loss spectroscopy to obtain spatially resolved band-gap maps of the heterostructure with sub-nanometer spatial resolution. A decrease in band-gap energy at highly strained core-shell interfacial regions is found, along with a switch from direct to indirect band-gap. These findings represent an advance in the sub-nanometer-scale understanding of the interplay between structure and electronic properties associated with highly mismatched semiconductor heterostructures, especially with those related to the planar growth of heterostructured nanowire networks. Planar growth of nanowire arrays involves interactions between materials that affect the electronic behavior of the effective heterojunction. Here, authors show how core curvature and cross-section morphology affect shell growth, demonstrating how strain at the core-shell interface induces electronic band modulations in ZnSe@ZnTe nanowires.