Skip to main content

TRANSFORMACION DE MATERIALES CELULOSICOS EN BIOPRODUCTOS AVANZADOS Y ECOLOGICOS

PID2020-114070RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Dissolving-grade pulp: a sustainable source for fiber production

  • Quintana, Elisabet|||0000-0002-4273-9204
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
The global textile fiber output increased five times from 1975 to 2020. Also, in 2010, the combined demand for man-made and natural fibers was projected to increase by 84% within 20 years. Clothing materials are largely made from cotton or petroleum-based synthetic fibers; both sources, however, have adverse environmental impacts. Thus, cotton requires vast amounts of land, water, fertilizers and pesticides, and synthetic fibers are not biodegradable. This scenario has raised the need for further exploration of cellulose polymers as sustainable sources for the textile industry. Cellulose, the most abundant renewable organic material on earth, is an outstanding polymer that by chemical derivatization or modification can offer a broad range of applications. Dissolving-grade pulp (DGP), which consists of highly pure cellulose, is the most suitable material for manufacturing cellulose derivatives and regenerated fibers. The latter are typically obtained by using the viscose process, which has considerable adverse environmental impacts. Although the textile industry has progressed substantially, further efforts are still needed to make its entire production chain more sustainable. This article provides an in-depth introduction to the potential of fibers with a high cellulose content, known as dissolving-grade pulps. It reviews the properties of DGP, the cooking and purifying methods typically used to obtain it, and the process by which paper-grade pulp can be converted into dissolving-grade pulp. Also, it discusses traditional and recently developed technologies for producing regenerated cellulose fibers. Finally, it examines the potential for recovering cellulose from textile waste as a novel sustainable practice., This publication is part of Project PID2020-114070RB-I00 (CELLECOPROD), funded by MCIN / AEI / 10.13039 / 501100011033. The author Elisabet Quintana is a Serra Húnter Fellow., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Ozone: a promising agent to functionalize cellulose

  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
Ozone is a well-known chemical agent used in pulp bleaching, where its role is to remove lignin although carbohydrates are also affected. Toe objective ofthis work was to modify cellulose with ozone in order to create new carbonyl groups that could provide new properties to this biopolymer. Two eucalyptus pulps with different content of hexenuronic acids (HexA) (ECF, TCF), and a high-cellulose content pulp (cotton linters) were ozone-treated. The presence of carbonyl groups was identified by the chain scissions (CSccc()) produced in cellulose during viscosity measurements and also by an increase in the amount of DNPH consumed by pulp fibres and an increase in pulp brightness reversion. At a <lose of 0.5% of ozone carbonyl groups were created in the three kinds of pulp but significantly higher amounts were introduced with two ozone stages at 0.5% (0.5+0.5). Different amounts of carbonyl groups were created depending on both, the HexA and hemicelluloses content. Thus, in the eucalyptus ECF bleached pulp the highest amounts offunctional groups were created, This publication is part of the project PID2020- 114070RB-I00 (CELLECOPROD), financed by MCIN/AEI/10.13039/501100011033, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Water-efficient formation of barrier films via airborne nanocelluloses

  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
This study introduces, for the first time, air-assisted deposition of cellulose nanocrystals (CNC) to create structured coatings on cellulose-based substrates. It first examines CNC hydration and dispersion at the air-water interface, detailing the transition from agglomerates to individual crystallites and the formation of coating layers. The structural and barrier properties of the resulting composites are then analyzed concerning CNC grammage. Results show that water rapidly penetrates CNC agglomerates, requiring less than a minute to loosen and individualize the CNC, enabling the formation of uniform coatings. CNC layer grammages of up to 90 g/m² are achieved within a short time. The structural characteristics of the CNC layers are assessed and correlated with their liquid and gas barrier properties. These coatings demonstrate exceptional barrier performance when reaching sufficient grammage, with oxygen transmission rates below 1 cc/m²·day, water vapor transmission rates as low as 130 g/m²·day, and air permeance up to 68 Bekk seconds. This innovative method facilitates the processing of complex materials with potential applications in packaging and membrane technologies, This publication is part of the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/501100011033. The authors would also like to thank the consolidated research group AGAUR 2021 SGR 00852
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Bionanocomposite films of nanocellulose with chitosan or alginate: Enhanced barrier properties and active packaging potential

  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
In this study, two biopolymers—alginate and chitosan—were combined with nanofibrillated cellulose (NFC) at varying concentrations (5–80%) to produce alginate-NFC and chitosan-NFC bionanocomposites. FTIR confirmed the good compatibility between NFC and the biopolymers. Subsequently, the optical, physical, and barrier properties relevant to packaging applications were evaluated. The incorporation of both biomacromolecules resulted in smoother and more transparent bionanocomposites. While a low concentration of alginate (5%) reduced both tensile strength and elongation at break, significant negative effects on these mechanical properties were only observed at higher chitosan loadings (50–80%). Surface hydrophobicity, evaluated by water drop test (WDT) and water contact angle (WCA), was also enhanced, reaching WCA values of 104° and 82° with 70% chitosan and alginate, respectively. Water vapor barrier performance (50% and 90% RH) improved only with chitosan addition, whereas grease barrier properties were enhanced exclusively by alginate. These contrasting effects are attributed to differences in surface free energy: chitosan increased the dispersive component of the bionanocomposites (up to 95%), while alginate introduced a strong polar character (65–82%). The results enabled insight into the interfacial interaction mechanisms among biopolymers in bionanocomposite matrices. Finally, both biopolymers provided oxygen scavenging capacity to bionanocomposites, making them promising candidates for active packaging applications—chitosan by increasing antioxidant activity, and alginate by facilitating the immobilization of an oxidoreductase-type enzyme, The authors would like to thank the consolidated research group AGAUR 2021 SGR 00852. Oriol Cusola and Cristina Valls are Serra Húnter Fellows, 9 - Indústria, Innovació i Infraestructura, 11 - Ciutats i Comunitats Sostenibles, 12 - Producció i Consum Responsables, 13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Materials based on cellulose for e-commerce packaging

  • Escursell Martínez, Silvia|||0000-0002-7947-2275
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Llorach-Massana, Pere
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
As a result of the pandemic and the new tax on the use of plastics in the EU, the consumption of cellulose has increased, especially for cardboard boxes as e-commerce packaging. Due to this high demand, the price of cellulose is rising considerably. It is also worth considering that in order to avoid problems with breakage during product mobility, overpackaging and the generation of more waste is a problem to be taken into account. Nature has shown us that it can optimise resources and energy, finding a balance between form, matter and function without generating waste, and building resilient, collaborative, creative and sensory models together. In fact, artists such as Leonardo da Vinci or naturalist as Ernst Haeckel already devoted themselves to observing and studying nature as a turning point in their designs and paintings. Focusing on materials, scientists such as Lynn Margulis, Janine Benyus or Stefano Mancuso have demonstrated the variety and different reproduction processes in natural ecosystems, as well as the interdependent relationship between them. And even new methodologies go beyond sustainability, and there is already talk of regenerative culture and systemic design. In other words, achieving transformative innovation through a more holistic vision and in collaboration with different entities. Following these considerations, our approach is to apply these natural systems to e-commerce packaging, obtaining a greater variety of biomaterials. For this reason we present different proposals for materials based on cellulose, one of the most abundant and renewable biopolymers on earth. We will also analyse the differences between cellulose extracted from vegetable fibre and cellulose generated from bacteria. Their properties provide us with flexibility, strength, toughness, among others, and allow us to rethink the different production processes to adapt them to each type of product and avoid generating overpackaging, This publication is part of the project PID2020- 114070RB-I00 (CELLECOPROD), financed by MCIN/AEI/10.13039/501100011033, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Periodate oxidation of nanofibrillated cellulose films for active packaging applications

  • Fernández Santos, Julia|||0000-0002-9105-9117
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
An alternative packaging material based on cellulose that possesses excellent barrier properties and is potentially useful for active packaging has been developed. Cellulose nanofibril was efficiently and selectively oxidized with sodium periodate generating reactive aldehyde groups. These groups formed hemiacetal and hemialdal bonds during film formation and, consequently, highly transparent, elastic and strong films were created even under moisture saturation conditions. The periodate oxidation treatment additionally decreased the polarity of the films and considerably enhanced their water barrier properties. Thus, the water contact angle of films treated for 3 and 6 h was 97° and 102°, their water drop test value was higher than in untreated film (viz., 138 and 141 min with 3 and 6 h of treatment) and their water vapour transmission rate was substantially better (3.31 and 0.78 g m-2 day-1 with 3 and 6 h, respectively). The presence of aldehyde groups facilitated immobilization of the enzyme laccase, which efficiently captures oxygen and prevents food decay as a result. Laccase-containing films oxidized 80 % of Methylene Blue colorant and retained their enzymatic activity after storage for 1 month and 12 reuse cycles, opening the door to the possible creation of a reusable packaging to replace the single-use packaging, This publication is part of the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/501100011033. The authors would also like to thank the consolidated research group AGAUR 2021 SGR 00852. The first author, J. Fernández-Santos, acknowledges the Universitat Politècnica de Catalunya and the Generalitat de Catalunya for the financial support of her predoctoral grant FI
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Evaluating the potential of ozone in creating functional groups on cellulose

  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
Several eucalyptus pulps (85% of cellulose) with different lignin and HexA content (unbleached, TCF and ECF) as well as cotton linters (97% of cellulose) were treated with ozone (at different pH and ozone doses) in order to modify its fibre-components. Special interest was given in the introduction of functional groups in carbohydrates. The presence of these groups was mainly identified by the chain scissions due to carbonyl groups (CSC=O) produced in cellulose during viscosity measurement. At a dose of 0.5% odp of ozone, the greatest amount of CSC=O (0.5) was created at acidic pH and with the ECF pulp, followed by the TCF (0.3) and by the unbleached (0.2). The same CSC=O (0.2) was obtained in cotton pulp. In this pulp, the ozone concentration had to be increased for the treatment to be effective. A further increase in the accessibility in both pulps was achieved by applying a washing stage between two ozone stages at 0.5% (0.5¿+¿0.5). With this treatment, the CSC=O was increased to 5.3 in the ECF, to 0.8 in the TCF and only to 0.3 in cotton. Brightness reversion and the amount of DNPH consumed were also used to verify the presence of functional groups. At 0.5¿+¿0.5, brightness reversion was increased from 16 to 55% in ECF, from 27 to 46% in TCF and from 7 to 31% in cotton. Therefore, it is shown that functional groups can be introduced by ozone in carbohydrates, but this effect strongly depends on the lignin, HexA and hemicellulose content, This publication is part of the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/501100011033. Authors are grateful to Torraspapel S.A. (Zaragoza, Spain), ENCE (Pontevedra, Spain) and CELESA (Tortosa, Spain) for supplying the pulp used. Special thanks are also due to the Serra Hunter Fellow to Oriol Cusola
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Transformation of a waste from the paper industry into a nanocellulosic material, Transformación de un residuo de la industria papelera en un material nanocelulósico

  • Huete Matute, Noemi|||0000-0002-2619-7943
  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
The constant search for productive improvements in the paper industry and the growing awareness of society about the problems derived from the use of fossil-based materials, are pushing the research efforts towards the development of renewable alternatives. On the one hand, several studies reported on lignocellulosic biomass as a sustainable alternative due to its high renewability, abundance, biodegradability, and low cost. On the other hand, the sludge produced during water treatments in a paper industry is a common residue which is usually discarded but can still contain high amounts of lignocellulosic material. The present study explores the revalorization of an industrial by-product coming from the water-treatment operations in a paper mill. The residue is used to obtain a nanocellulosic biomaterial, using cellulase-assisted enzymatic treatments in combination with mechanical processes. The results show that enzymatic treatments improve the processing of fibrillar nanocellulose (NCF), with an increase in the hydrophobic behavior of the NFC, giving rise to transparent films with reduced whiteness, in contrast to those which were simply refined. However, the obtained films showed a reduced tensile resistance. The enzymatic action prior to refining improves the obtaining of smaller fibres and increases the percentage of fines. Thus, a more homogeneous film formation is obtained, compared to a later enzymatic action. Several films with an increasing NFC content were produced and analyzed. Results indicate that an increasing NFC content rises the film density, air barrier, transparency, and water permeability and decreases whiteness and tensile strength. The study demonstrates that it is technically possible to use a waste from a paper wastewater treatment plant to produce NFC
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Flax biorefining for paper production

  • Cabañas Romero, L. Verónica
  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Buruaga Ramiro, Carolina
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
  • Valenzuela Mayorga, Susana Valeria
In this work, we assessed the potential of Cel6D, a recently reported exocellulase from Paenibacillus barcinonensis, as a biorefining agent for flax pulp. Pulp fibers were treated with this enzyme, Cel9B (an endocellulase previously shown to possess biorefining action) and the two in combination. Samples of biorefined flax pulp were mechanically refined to obtain handsheets. All three biorefining treatments decreased air permeance in the handsheets. Cel9B increased tensile index and folding endurance, and the Cel6D¿-¿Cel9B combination increased tensile index and burst index but also resulted in markedly decreased tear index and folding endurance. On the other hand, Cel6D increased tensile index and burst index; also, more importantly, it increased tear resistance, albeit slightly, relative to the other two treatments. The results of this work can be useful to understand the differential effects of exocellulases and endocellulases as biorefining tools and open up new avenues for exploring their use in other biotechnological applications, Open Access funding provided thanks to the CRUECSIC agreement with Springer Nature. This work was funded by Spain’s Scientific and Technological Research Council (MINECO) through grant CTQ2017-84966-C2-2-R and the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/ 501100011033. Verónica CabañasRomero expresses gratitude for receiving financial support through a doctoral fellowship from the National Postgraduate Scholarship Program Abroad “Don Carlos Antonio López” of Paraguay’s Ministry of Finance
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Valorization of paper waste sludge to produce films for packaging

  • Quintana, Elisabet|||0000-0002-4273-9204
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
The global production of paper was more than 400 million tons in 2020, and about 40–50 kg of dry sludge/ton paper produced was generated. The management of this huge volume of solid waste material has become a serious problem for paper industry and an environmental challenge. Sustainable practices, alternative to disposal by landfilling, must be developed. The present work studied the potential of reusing sludge waste from paper manufacturer with the purpose to produce cellulose acetate films., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Towards sustainable building solutions: Development of hemp shiv-based green insulation material

  • Martínez Martínez, Borja|||0000-0002-4398-1983
  • Mendizábal Dinucci, Virginia Dolores|||0000-0003-0919-801X
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Gil Espert, Lluís|||0000-0002-2007-4846
There is currently a growing need for sustainable and environmentally friendly materials. One promising candidate is hemp shiv, which is considered waste material. hemp shiv exhibits lightweight properties and high insulation capabilities. This study focuses on the development of a material based in hemp shiv, recycled cardboard fibers is used as binder material, with the addition of a vegetable coating (colophony and arabic gum) for moisture protection and citric acid to enhance cellulose crosslinking. Thermal insulation properties were assessed measuring the heat transfer through the material. Acoustic insulation properties were evaluated using a Kundt tube within a frequency range of 100–6500 Hz. Mechanical tests, including compression, shear, and bending, were performed to assess the material’s strength. Additionally, moisture and fire resistance properties, as well as microstructure analysis, were examined. The influence of citric acid in the cellulose crosslinking was verified using FTIR-ATR spectroscopy. Results demonstrated that a higher percentage of hemp shiv content led to improved insulation performance, achieving attenuation values greater than 0.85– 0.95 dB/dB and a thermal conductivity of 0.02–0.03 W/m K. These findings indicate a great performance compared to commercial materials. The coating shields the material from external factors. It was observed that the citric acid does not react with hemp shiv., This research was funded by ACCIÓ grant number VALSUCANEM ACE014/20/000024 and PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/ 501100011033. The corresponding author is partially granted through the FPU-UPC scholarship, 2021. The fourth author is a Serra Húnter fellow., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Ionic liquids-assisted bioconversion of lignocellulosic biomass for the development of value-added products

  • Amini, Elahe|||0000-0003-1524-0907
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
Lignocellulosic biomass is the most abundant renewable and inexpensive source that can be used to produce biofuels and bioproducts. One of the major limitations of biomass valorisation is its recalcitrance to an efficient conversion due to its lignin-carbohydrate complex structure. This limitation causes technical and economic challenges for the conversion of lignocellulosic biomass into value-added products. Certain ionic liquids (ILs) have been proven to be effective solvents to deconstruct lignocellulosic biomass. The concerns over hazards of conventional volatile organic solvents can be overcome by ILs due to their unique and ‘green’ characteristics. Advancements in ionic liquid pretreatment may help to increase the productivity of lignocellulosic-based bioconversion. This review describes, at first, the potential of the most prominent types of ionic liquids and the impact of the cation/anion combination on their physiochemical properties. It then discusses the different approaches, which are followed for the dissolution and fractionation of three major components of lignocellulosic biomass using ionic liquids and categorize them based on the target application. Additionally, the optimal process parameters for ionic liquid pretreatment toward optimisation of the dissolution yield are mentioned. It finally highlights the challenges of using ionic liquid during its commercial use in biomass pretreatment and processing, specially the synthesis cost as the economic barrier. It is hoped that the highlights in future prospect and challenges of adopting IL in these processes will stimulate a wide range of research studies and collaborations, leading to significant industrial progress in this area, Special thanks are also due to the Serra Húnter Fellow to Cristina Valls and to the FPI-UPC awarded to Elahe Amini
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Valorization of waste paper sludge as a sustainable source for packaging applications

  • Quintana, Elisabet|||0000-0002-4273-9204
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
Paper sludge consists mainly of wet short cellulose fibers that are lost during papermaking and of residual chemicals used in the manufacturing process that remain dissolved in the water. Each ton of paper generates about 40–50 kg of dry sludge, of which 70% is primary sludge. Paper production, which exceeded 400 million tons globally in 2020, generates vast volumes of solid waste. Primary sludge is usually fiber-rich and hence suitable to be recycled back into the papermaking process. However, if the sludge is to be disposed of in landfills, sustainable practices must be developed in order to recover the fibers as they are valuable source for manufacturing high value-added products. This study investigates the valorization of paper sludge discarded by a filter paper manufacturer, with the purpose of producing cellulose acetate films for food packaging. The process involves recovering cellulose fibers from the sludge, purifying them and through acetylation reaction produce cellulose acetate films. FTIR spectra confirmed successful acetylation of fibers and also that acetyl groups reduced the hydrophilicity of cellulose—the contact angle was increased to over 80° from 50° in native cellulose. The films exhibited very good water barrier properties at both 50% and 90% relative humidity (RH), Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This publication is part of the Project PID2020-114070RB-I00 (CELLECOPROD), funded by MCIN/ AEI/10.13039/501100011033. Elisabet Quintana is a Serra Húnter Fellow. Authors are grateful to PhD student Noemi Huete for kindly providing information about the composition of waste paper sludge
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Natural additives to enhance the barrier properties of nanocellulose films

  • Fernández Santos, Julia|||0000-0002-9105-9117
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
Finding alternatives to fossil-based materials is one of the most important challenges of our time. Since cellulose is the most abundant natural polymer on the planet, its use to solve this challenge would be ideal. In the present work, cellulose nanocrystals (CNC) were mixed with different plasticizers to obtain films with improved properties. To this aim, a first study was conducted in order to find the optimal amounts of plasticizer which maximize the compatibility with nanocellulose. The studied additives were Sorbitol (Sor), Glycerol (Gly), Maltitol (Mal), Xylitol (Xyl), Mannitol (Man), Gellan gum (Gg), and Ethylene glycol (Eg). The addition of these plasticizers to the CNC matrix was expected to improve the film flexibility and workability, which is one of the major limitations of this polymer. The selected plasticizers show similar structure to nanocellulose, with free hydroxyl groups which allow compatibility with nanocellulose, resulting in homogeneous films. The films with different amounts of additives were characterized in terms of barrier properties, crystallinity, SFE (surface free energy), and biodegradability. The barrier properties of the films were analyzed in terms of air, oil, water, water vapor and oxygen permeabilities. Results show that all additives decreased air and water permeance, to a greater or lesser extent. CNC films with Mal, Sor, and Xyl had a better oxygen barrier than the control, showing a total oxygen resistance at RH below 60%. About WVTR at moderate (50%) and drastic (90%) humidity, Mal and Gg showed values below the control. Films containing Mal provided the best barrier properties to oxygen and water vapor transmission. The interaction of the films with other compounds (liquids or adhesives) was observed through SFE. In relation to biodegradability, all the additives increased the biodegradability of CNC-based films when subjected to a biodegradability test under controlled composting conditions. These biodegradability results are relevant in terms of the environmental impact of the films, especially if the films are intended to provide a sustainable alternative to traditional food packaging materials
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Enhanced robustness of a bridge-type Rf-Mems switch for enabling applications in 5G and 6G communicationsr

  • Casals Terré, Jasmina|||0000-0002-1368-3950
  • Pradell i Cara, Lluís|||0000-0003-4026-226X
  • Heredia, Julio
  • Giacomozzi, Flavio
  • Iannacci, Jacopo
  • Contreras Lizárraga, Adrián
  • Ribó Pal, Miquel
In this paper, new suspended-membrane double-ohmic-contact RF-MEMS switch configurations are proposed. Double-diagonal (DDG) beam suspensions, with either two or three anchoring points, are designed and optimized to minimize membrane deformation due to residual fabrication stresses, thus exhibiting smaller mechanical deformation and a higher stiffness with more release force than previously designed single diagonal beam suspensions. The two-anchor DDGs are designed in two different orientations, in-line and 90¿ -rotated. The membrane may include a window to minimize the coupling to the lower electrode. The devices are integrated in a coplanar-waveguide transmission structure and fabricated using an eight-mask surface-micro-machining process on high-resistivity silicon, with dielectric-free actuation electrodes, and including glass protective caps. The RF-MEMS switch behavior is assessed from measurements of the device S parameters in ON and OFF states. The fabricated devices feature a measured pull-in voltage of 76.5 V/60 V for the windowed/not-windowed two-anchor DDG membranes, and 54 V/49.5 V for the windowed/notwindowed three-anchor DDG membranes, with a good agreement with mechanical 3D simulations. The measured ON-state insertion loss is better than 0.7 dB/0.8 dB and the isolation in the OFF state is better than 40 dB/31 dB up to 20 GHz for the in-line/90¿ -rotated devices, also in good agreement with 2.5D electromagnetic simulations
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Cellulose acetate films from chemo-enzymatic dissolving pulps

  • Quintana, Elisabet|||0000-0002-4273-9204
  • Ago, Mariko
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Fernández Santos, Julia|||0000-0002-9105-9117
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
  • Rojas, Orlando J.
The purpose of this work is to obtain dissolving cellulose fibers that are suitable for the manufacturing of cellulose derivatives. Therefore, the combination of enzymatic and chemical treatments during the bleaching stage (lignin removal) and purification stage (hemicellulose removal) is proposed. The obtained dissolving cellulose was submitted to acetylation reactions, and then acetate films were prepared as an example of end product. Assessing the quality of acetate films, it was concluded that dissolving cellulose fibers had good properties and fulfilled the quality requirements. These satisfactory results were compared with acetate films obtained under same acetylation conditions, but the dissolving cellulose fibers used as a raw material came from a conventional and industrial process., This publication is part of the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/501100011033. O.J.R. acknowledges funding support by the Academy of Finland through its Center of Excellence Program (2014–2019) “Molecular Engineering of Biosynthetic Hybrid Materials Research”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Non-invasive multiparametric approach to determine sweat-blood lactate bioequivalence

  • Rabost Garcia, Genís|||0000-0002-6783-4400
  • Colmena, Valeria
  • Aguilar Torán, Javier
  • Vieyra Galí, Joan
  • Punter Villagrasa, Jaime
  • Casals Terré, Jasmina|||0000-0002-1368-3950
  • Miribel Català, Pere
  • Muñoz Pascual, Xavier
  • Cadefau, Joan
  • Padullés, Josep
  • Brotons Cuixart, Daniel
Many sweat-based wearable monitoring systems have been recently proposed, but the data provided by those systems often lack a reliable and meaningful relation to standardized blood values. One clear example is lactate, a relevant biomarker for both sports and health sectors, with a complex sweat–blood bioequivalence. This limitation decreases its individual significance as a sweat-based biomarker. Taking into account the insights of previous studies, a multiparametric methodology has been proposed to predict blood lactate from non-invasive independent sensors: sweat lactate, sweat rate, and heart rate. The bioequivalence study was performed with a large set of volunteers (>30 subjects) in collaboration with sports institutions (Institut Nacional d’Educació Física de Catalunya, INEFC, and Centre d’Alt Rendiment, CAR, located in Spain). A neural network algorithm was used to predict blood lactate values from the sensor data and subject metadata. The developed methodology reliably and accurately predicted blood lactate absolute values, only adding 0.3 mM of accumulated error when compared to portable blood lactate meters, the current gold standard for sports clinicians. The approach proposed in this work, along with an integrated platform for sweat monitoring, will have a strong impact on the sports and health fields as an autonomous, real-time, and continuous monitoring tool, The authors kindly acknowledge the support from the Spanish Ministerio de Indústria, Energía y Turismo (AEI Clusters Program, AEI2009L1CA011), Ministerio de Ciencia y Innovació n (PID2020-114070RB-I00), Agencia Estatal de Investigación (RED2018-102829-T and CPP2021-009021), and AGAUR (2019 DI 18 and 2021PROD00064)
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Evaluation of the potential of paper fibres for better management of natural resources, Evaluación de la potencialidad de las fibras papeleras para una mejor gestión de los recursos naturales

  • Ferrá González, Mariana
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Carnicé Bañeres, Pilar
La industria papelera española está comprometida con el reciclaje y apuesta por cumplir con los objetivos de una economía circular. Pero la elevada demanda de fibras recuperadas ha creado un alto impacto en los precios de ésta, produciendo una subida en los costes y una reducción de su disponibilidad. Además, se suma la gran diversidad de tipologías de fibras que pueden encontrarse en el papel recuperado, lo que dificulta el control, y el aprovechamiento total de la materia prima. El objetivo de este trabajo es poder optimizar el uso de las fibras para producir un ahorro en costes de materia prima, buscando la similitud de propiedades entre las fibras recuperadas, manteniendo constantes las propiedades físicas y mecánicas del papel fabricado. La presente investigación se enmarca en un estudio de I+D+i orientado al conocimiento de la potencialidad de las fibras de papel recuperadas, en colaboración con la papelera Alier (Rosselló, Lleida). Se ha conseguido mejorar la gestión de la selección, compra y utilización de la materia prima, ya que establece una caracterización que las agrupa para conseguir el máximo rendimiento en fibra y mejores propiedades del producto final, con el consiguiente beneficio medioambiental de minimizar el residuo que va a vertedero, Objectius de Desenvolupament Sostenible::15 - Vida d'Ecosistemes Terrestres, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

EWOD Sensor for rapid quantification of marine dispersants in oil spill management

  • Caro Pérez, Oriol
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
  • Casals Terré, Jasmina|||0000-0002-1368-3950
In this study, we introduce a novel Electrowetting-on-Dielectric (EWOD) sensor designed to quantify marine dispersants at the spill point. The sensor quantifies changes in the surface tension of liquid droplets at varying dispersant concentrations through the deformation response of the droplet under applied voltage. Analyzed responses include droplet length and contact angle (CA) on the device surface upon sensor activation. This sensor offers significant advantages over existing chemical methods, which are costly and complex. Moreover, compared to conventional methods based on the same principle, it demonstrates enhanced sensitivity at low concentrations. Additionally, the sensor’s portability enables instantaneous and in situ measurements of marine dispersant concentrations, thus providing a crucial tool for effective oil spill response by facilitating on-site decision-making and offering higher temporal resolution for studies on the marine dispersant’s environmental impact. The device’s potential extends beyond marine dispersants to detecting various contaminants affecting surface tension. Its adaptability underscores the EWOD device’s role as a versatile tool for environmental monitoring and on-site analysis, addressing the urgent need for efficient and sustainable solutions in environmental management, The authors would like to thank Trafic Medioambiente (Madrid, Spain) for kindly providing the MK-Disper sample used in this study. Their support in supplying the dispersant was essential for the development of this research
UPCommons. Portal del coneixement obert de la UPC
Publication Capítulo o parte de un libro (BookPart)

Repensando el diseño de packaging para e-commerce

  • Escursell Martínez, Silvia|||0000-0002-7947-2275
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
  • Llorach-Massana, Pere
Si analizamos la evolución de la humanidad, la revolución industrial nos marcó un antes y un después en la sociedad, y también en el sistema de producción, pasando de la artesanía a la escala industrial, con todas sus consecuencias, siendo cada vez menos sostenibles. La industrialización ha permitido una eficiencia en los procesos de producción para mejorar en la rapidez y economizar los productos para llegar a más personas. Aunque esta democratización ha sido en detrimento del exceso de productos, de la sostenibilidad y la repetición constante de las formas que ha limitado la creatividad. Las tecnologías disponibles en la actualidad permiten encontrar nuevas alternativas para aumentar la creatividad de manera más sostenible y consciente a la hora de concebir productos y su producción. En este artículo analizaremos de dónde venimos, la iniciativa en romper con las formas hasta ahora conocidas, y en repensar nuevos materiales y procesos de producción para el packaging e-commerce. Con ello, se intentará evitar caer en las premisas antes descritas, aunque somos conscientes que somos humanos y la perfección no existe
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Enhanced selectivity of a 3D-printed microfluidic gas detector towards different volatile organic compounds (VOCs) for the effective monitoring of indoor air quality in vehicles

  • Perarnau Ollé, Enric|||0000-0002-9316-691X
  • Farré Lladós, Josep|||0000-0001-5909-0176
  • Casals Terré, Jasmina|||0000-0002-1368-3950
  • López Martínez, Joan Antoni|||0000-0002-0082-9770
In the age of connected mobility, monitoring volatile organic compounds (VOCs) inside the vehicle plays a pivotal role in effectively controlling in-cabin air quality conditions. In this context, it is imperative to develop new monitoring devices that not only detect VOCs at low concentrations, but also can discern those compounds that pose a major risk to the health and comfort of occupants. Microfluidic gas detectors have recently emerged as a promising solution for the cost-effective discretization of VOCs in interior environments. Although microfluidic gas detectors may not yet reach the accuracy of other analytical methods, these devices offer a simple and compact design, can work at room-temperature, and do not require a carrier gas to operate; which represent a clear competitive advantage for their implementation in the vehicle. This work intends to study the feasibility of a 3D-printed microfluidic gas detector for the semi-selective detection of VOCs inside the vehicle cabin. In particular, this research aims to analyze whether the selectivity of these devices can be improved by (i) optimizing the thickness of the polymer layer on the walls of the microchannel, and (ii) understanding the influence of the chemical affinity between VOCs and the coating polymer. Empirical results reveal that thicker polymer films enable to enhance and expand the retention capabilities of the microchannel. Additionally, the Hansen solubility parameters are presented as a suitable tool to analyze and determine how polymer-analyte affinity, in combination with other intrinsic properties of analytes, influences the elution of contaminants from the microfluidic channel as well., Authors of this work are thankful to SEAT S.A. for their support during the whole research project without further incidences or conflict of interests. This work was supported by: Agència de Gestió d'Ajuts Universitaris i de Recerca AGAUR (2018 DI 0102 and 2021PROD00064), the EIT Urban Mobility, European Commission (I-2020-31 20007), Ministerio de Ciencia e Innovación (PID2020-114070RB-I00), and the Agencia Estatal de Investigación (RED2018-102829-T and CPP2021-009021)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Promising nanocomposites for food packaging based on cellulose-PCL films reinforced by using ZnO nanoparticles in an ionic liquid

  • Amini, Elahe|||0000-0003-1524-0907
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
The fact that most composites consist of polluting synthetic materials has prompted a search for biodegradable replacements based on cellulose fibers and polycaprolactone as potential packaging materials. In this work, we developed a green, efficient approach to rendering hydrophobic polycaprolactone (PCL) compatible with hy- drophilic cellulose fibers by using an ionic liquid as a nanowelding agent in the presence of zinc oxide nano- particles (ZnONPs). Transparent biobased nanocomposite films were thus directly obtained by in situ ring- opening polymerization (ROP) of e-caprolactone (CL) monomers onto the dissolved cellulose matrix by using the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac). [EMIM]Ac and ZnONPs were efficiently catalyzed e-caprolactone ROP under mild conditions. Cellulose-grafted PCL nanocomposite films were obtained by adding variable amounts of CL and ZnONPs to the cellulose matrix. The maximum grafting of 40% was achieved by using 5¦wt% ZnONPs and 70% CL. FTIR spectra confirmed the presence of PCL in the nano- composites. Also, FE-SEM revealed uniform dispersion of ZnONPs and PCL in the regenerated cellulose matrix, and trapping of nanoparticles in nanofibrils after the cellulose matrix was regenerated. X-ray diffraction (XRD) spectra showed a decreased apparent crystallinity and crystallite size. The XRD results also confirmed that the crystal properties of the nanocomposite films and an all-cellulose composite (ACC) were almost identical. The mechanical, barrier and optical properties of the nanocomposite films were significantly better than those of the ACC film by effect of the incorporation of ZnONPs and PCL especially with 5¦wt% ZnONPs and 70% CL). The nanocomposite films exhibited acceptable antioxidant activity and UV-light barrier properties, so they hold promise for used in food packaging. Nanocomposite films are in fact multifunctional materials with the potential for use in cellulose-based food packaging by virtue of their being transparent and bio-based, and possessing very good water vapor and oxygen barrier properties., This publication is part of the PID2020-114070RB-I00 (CELLECO- PROD) project, funded by MCIN/AEI/10.13039/ 501100011033. The first author, E. Amini, gratefully acknowledges the Universitat Politècnica de Catalunya and Banco Santander for the financial support of her predoctoral grant FPI-UPC
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Materials and manufacturing methods for EWOD devices: current status and sustainability challenges

  • Caro Pérez, Oriol
  • Casals Terré, Jasmina|||0000-0002-1368-3950
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
Electrowetting-on-dielectric (EWOD) devices have proven to be effective tools for precise microfluidic manipulation or in liquid lenses that surpass conventional solid lenses in versatility. However, the fabrication of these devices presents many challenges, such as their scalability or the growing concern on their environmental impact due to materials used in their fabrication. This review provides a comprehensive analysis of the materials currently used in the fabrication of EWOD devices and the characteristics they must meet. In addition, a discussion of future challenges in the fabrication of EWOD devices is presented, in particular the environmental problems presented by some of the materials currently in use., The authors would like to acknowledge funding by Spain’s Ministry of Science and Innovation and Spain’s State Research Agency: PID2020-114070RB-I00 (CELLECOPROD)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Development of an electrowetting-on-dielectric cellulose-based conductive sensor using direct inkjet printed silver nanoparticles

  • Caro Pérez, Oriol
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
  • Casals Terré, Jasmina|||0000-0002-1368-3950
In the quest for sustainable and efficient solutions for modern electronics, flexible electronic devices have garnered global attention due to their potential to revolutionize various technological applications. The manufacturing of these devices poses significant challenges, particularly regarding environmental sustainability and ease of production. A novel method employing direct inkjet printing of silver nanoparticle (npAg) ink onto cellulose nanocrystal (CNC) substrates is presented, offering a promising alternative to conventional methods. This study demonstrates the ability of CNCs to serve as a flexible and biodegradable substrate that does not require complex post-printing treatments to achieve adequate electrical performance. This method was implemented in the fabrication of an electrowetting-on-dielectric (EWOD) device, achieving circuit patterns with high resolutions and reduced resistances. The findings not only validate the use of CNCs in flexible electronic applications but also underscore the potential of advanced printing techniques to develop flexible electronics that are environmentally sustainable and technically feasible, This research was funded by Spain’s Ministry of Science and Innovation and Spain’s State Research Agency under grant numbers PID2020-114070RB-I00 (CELLECOPROD), CPP2021-009021, and CTQ2017-84966-C2-1-R, supported by the State Research Agency of the Ministry of Economy, Industry and Competitiveness
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Valorization of paper waste sludge to produce films for packaging

  • Quintana, Elisabet
  • Valls Vidal, Cristina
  • Roncero Vivero, María Blanca
The global production of paper was more than 400 million tons in 2020, and about 40–50 kg of dry sludge/ton paper produced was generated. The management of this huge volume of solid waste material has become a serious problem for paper industry and an environmental challenge. Sustainable practices, alternative to disposal by landfilling, must be developed. The present work studied the potential of reusing sludge waste from paper manufacturer with the purpose to produce cellulose acetate films., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Composites of cellulose nanocrystals in combination with either cellulose nanofibril or carboxymethylcellulose as functional packaging films

  • Fernández Santos, Julia
  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
Cellulose nanocrystals (CNC) were mixed with either cellulose nanofibril (CNF) or carboxymethylcellulose (CMC) in variable proportions (0/100, 20/80, 40/60, 50/50, 60/40, 80/20 and 100/0) to obtain cast films with acceptable barrier and mechanical properties as replacements for food packaging plastics. Both CNF and CMC improved tensile strength, elongation, UV opacity, air resistance, hydrophobicity (WCA-water contact angle), water vapor transmission rate (WVTR) and oxygen impermeability in pure CNC. WVTR and oxygen permeability were strongly dependent on relative humidity (RH). Interestingly, the greatest effect on WVTR was observed at RH¿=¿90% in films containing CMC in proportions above 60%. CMC- and CNF-containing films had oxygen impermeability up to an RH level of 80% and 60%, respectively. The previous effects were confirmed by food packaging simulation tests, where CMC-containing films proved the best performers. The composite films studied were biodegradable—which constitutes a major environmental related advantage—to an extent proportional to their content in CMC or CNF, This publication is part of the PID2020-114070RB-I00 (CELLECO- PROD) project, funded by MCIN/AEI/10.13039/501100011033. The authors would also like to thank the consolidated research group AGAUR 2017 SGR 30 with Universitat de Barcelona (UB) and to the Serra Húnter Fellowship awarded to O. Cusola. With the support from the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia and the European Social Fund, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Dissolving-grade pulp: a sustainable source for fiber production

  • Quintana, Elisabet
  • Valls Vidal, Cristina
  • Roncero Vivero, María Blanca
The global textile fiber output increased five times from 1975 to 2020. Also, in 2010, the combined demand for man-made and natural fibers was projected to increase by 84% within 20 years. Clothing materials are largely made from cotton or petroleum-based synthetic fibers; both sources, however, have adverse environmental impacts. Thus, cotton requires vast amounts of land, water, fertilizers and pesticides, and synthetic fibers are not biodegradable. This scenario has raised the need for further exploration of cellulose polymers as sustainable sources for the textile industry. Cellulose, the most abundant renewable organic material on earth, is an outstanding polymer that by chemical derivatization or modification can offer a broad range of applications. Dissolving-grade pulp (DGP), which consists of highly pure cellulose, is the most suitable material for manufacturing cellulose derivatives and regenerated fibers. The latter are typically obtained by using the viscose process, which has considerable adverse environmental impacts. Although the textile industry has progressed substantially, further efforts are still needed to make its entire production chain more sustainable. This article provides an in-depth introduction to the potential of fibers with a high cellulose content, known as dissolving-grade pulps. It reviews the properties of DGP, the cooking and purifying methods typically used to obtain it, and the process by which paper-grade pulp can be converted into dissolving-grade pulp. Also, it discusses traditional and recently developed technologies for producing regenerated cellulose fibers. Finally, it examines the potential for recovering cellulose from textile waste as a novel sustainable practice., This publication is part of Project PID2020-114070RB-I00 (CELLECOPROD), funded by MCIN / AEI / 10.13039 / 501100011033. The author Elisabet Quintana is a Serra Húnter Fellow., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Flax biorefining for paper production

  • Cabañas Romero, L. Verónica
  • Cusola Aumedes, Oriol
  • Buruaga Ramiro, Carolina
  • Valls Vidal, Cristina
  • Roncero Vivero, María Blanca
  • Valenzuela Mayorga, Susana Valeria
In this work, we assessed the potential of Cel6D, a recently reported exocellulase from Paenibacillus barcinonensis, as a biorefining agent for flax pulp. Pulp fibers were treated with this enzyme, Cel9B (an endocellulase previously shown to possess biorefining action) and the two in combination. Samples of biorefined flax pulp were mechanically refined to obtain handsheets. All three biorefining treatments decreased air permeance in the handsheets. Cel9B increased tensile index and folding endurance, and the Cel6D¿-¿Cel9B combination increased tensile index and burst index but also resulted in markedly decreased tear index and folding endurance. On the other hand, Cel6D increased tensile index and burst index; also, more importantly, it increased tear resistance, albeit slightly, relative to the other two treatments. The results of this work can be useful to understand the differential effects of exocellulases and endocellulases as biorefining tools and open up new avenues for exploring their use in other biotechnological applications, Open Access funding provided thanks to the CRUECSIC agreement with Springer Nature. This work was funded by Spain’s Scientific and Technological Research Council (MINECO) through grant CTQ2017-84966-C2-2-R and the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/ 501100011033. Verónica CabañasRomero expresses gratitude for receiving financial support through a doctoral fellowship from the National Postgraduate Scholarship Program Abroad “Don Carlos Antonio López” of Paraguay’s Ministry of Finance, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Enhanced robustness of a bridge-type Rf-Mems switch for enabling applications in 5G and 6G communicationsr

  • Casals Terré, Jasmina
  • Pradell i Cara, Lluís
  • Heredia, Julio
  • Giacomozzi, Flavio
  • Iannacci, Jacopo
  • Contreras Lizárraga, Adrián
  • Ribó Pal, Miquel
In this paper, new suspended-membrane double-ohmic-contact RF-MEMS switch configurations are proposed. Double-diagonal (DDG) beam suspensions, with either two or three anchoring points, are designed and optimized to minimize membrane deformation due to residual fabrication stresses, thus exhibiting smaller mechanical deformation and a higher stiffness with more release force than previously designed single diagonal beam suspensions. The two-anchor DDGs are designed in two different orientations, in-line and 90¿ -rotated. The membrane may include a window to minimize the coupling to the lower electrode. The devices are integrated in a coplanar-waveguide transmission structure and fabricated using an eight-mask surface-micro-machining process on high-resistivity silicon, with dielectric-free actuation electrodes, and including glass protective caps. The RF-MEMS switch behavior is assessed from measurements of the device S parameters in ON and OFF states. The fabricated devices feature a measured pull-in voltage of 76.5 V/60 V for the windowed/not-windowed two-anchor DDG membranes, and 54 V/49.5 V for the windowed/notwindowed three-anchor DDG membranes, with a good agreement with mechanical 3D simulations. The measured ON-state insertion loss is better than 0.7 dB/0.8 dB and the isolation in the OFF state is better than 40 dB/31 dB up to 20 GHz for the in-line/90¿ -rotated devices, also in good agreement with 2.5D electromagnetic simulations, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication

Optimización del estucado de sustratos celulósicos con nanocelulosa cristalina

  • Huete Matute, Noemi
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
La nanocelulosa (NC) es un biomaterial prometedor de alto valor añadido y de un interés creciente entre la comunidad científica e industrial. Se presenta como una posible alternativa a los materiales derivados de recursos fósiles, ya que tiene excelentes propiedades barrera y propiedades mecánicas. Dentro del mundo de las NC, la nanocelulosa cristalina (CNC), es la que presenta una formación más homogénea, es más transparente y la que presenta las menores dimensiones en longitud y diámetro. Por esos motivos se cree que puede funcionar bien como recubrimiento para mejorar propiedades de sustratos papeleros. El presente estudio desarrolla y optimiza el proceso para estucar en el laboratorio con CNC como material de recubrimiento, de la forma más efectiva y eficiente posible, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Towards sustainable building solutions: Development of hemp shiv-based green insulation material

  • Martínez Martínez, Borja
  • Mendizábal Dinucci, Virginia Dolores
  • Roncero Vivero, María Blanca
  • Bernat Masó, Ernest
  • Gil Espert, Lluís
There is currently a growing need for sustainable and environmentally friendly materials. One promising candidate is hemp shiv, which is considered waste material. hemp shiv exhibits lightweight properties and high insulation capabilities. This study focuses on the development of a material based in hemp shiv, recycled cardboard fibers is used as binder material, with the addition of a vegetable coating (colophony and arabic gum) for moisture protection and citric acid to enhance cellulose crosslinking. Thermal insulation properties were assessed measuring the heat transfer through the material. Acoustic insulation properties were evaluated using a Kundt tube within a frequency range of 100–6500 Hz. Mechanical tests, including compression, shear, and bending, were performed to assess the material’s strength. Additionally, moisture and fire resistance properties, as well as microstructure analysis, were examined. The influence of citric acid in the cellulose crosslinking was verified using FTIR-ATR spectroscopy. Results demonstrated that a higher percentage of hemp shiv content led to improved insulation performance, achieving attenuation values greater than 0.85– 0.95 dB/dB and a thermal conductivity of 0.02–0.03 W/m K. These findings indicate a great performance compared to commercial materials. The coating shields the material from external factors. It was observed that the citric acid does not react with hemp shiv., This research was funded by ACCIÓ grant number VALSUCANEM ACE014/20/000024 and PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/ 501100011033. The corresponding author is partially granted through the FPU-UPC scholarship, 2021. The fourth author is a Serra Húnter fellow., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Natural additives to enhance the barrier properties of nanocellulose films

  • Fernández Santos, Julia
  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
Finding alternatives to fossil-based materials is one of the most important challenges of our time. Since cellulose is the most abundant natural polymer on the planet, its use to solve this challenge would be ideal. In the present work, cellulose nanocrystals (CNC) were mixed with different plasticizers to obtain films with improved properties. To this aim, a first study was conducted in order to find the optimal amounts of plasticizer which maximize the compatibility with nanocellulose. The studied additives were Sorbitol (Sor), Glycerol (Gly), Maltitol (Mal), Xylitol (Xyl), Mannitol (Man), Gellan gum (Gg), and Ethylene glycol (Eg). The addition of these plasticizers to the CNC matrix was expected to improve the film flexibility and workability, which is one of the major limitations of this polymer. The selected plasticizers show similar structure to nanocellulose, with free hydroxyl groups which allow compatibility with nanocellulose, resulting in homogeneous films. The films with different amounts of additives were characterized in terms of barrier properties, crystallinity, SFE (surface free energy), and biodegradability. The barrier properties of the films were analyzed in terms of air, oil, water, water vapor and oxygen permeabilities. Results show that all additives decreased air and water permeance, to a greater or lesser extent. CNC films with Mal, Sor, and Xyl had a better oxygen barrier than the control, showing a total oxygen resistance at RH below 60%. About WVTR at moderate (50%) and drastic (90%) humidity, Mal and Gg showed values below the control. Films containing Mal provided the best barrier properties to oxygen and water vapor transmission. The interaction of the films with other compounds (liquids or adhesives) was observed through SFE. In relation to biodegradability, all the additives increased the biodegradability of CNC-based films when subjected to a biodegradability test under controlled composting conditions. These biodegradability results are relevant in terms of the environmental impact of the films, especially if the films are intended to provide a sustainable alternative to traditional food packaging materials, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication

Repensando el diseño de packaging para e-commerce

  • Escursell Martínez, Silvia
  • Roncero Vivero, María Blanca
  • Llorach-Massana, Pere
Si analizamos la evolución de la humanidad, la revolución industrial nos marcó un antes y un después en la sociedad, y también en el sistema de producción, pasando de la artesanía a la escala industrial, con todas sus consecuencias, siendo cada vez menos sostenibles. La industrialización ha permitido una eficiencia en los procesos de producción para mejorar en la rapidez y economizar los productos para llegar a más personas. Aunque esta democratización ha sido en detrimento del exceso de productos, de la sostenibilidad y la repetición constante de las formas que ha limitado la creatividad. Las tecnologías disponibles en la actualidad permiten encontrar nuevas alternativas para aumentar la creatividad de manera más sostenible y consciente a la hora de concebir productos y su producción. En este artículo analizaremos de dónde venimos, la iniciativa en romper con las formas hasta ahora conocidas, y en repensar nuevos materiales y procesos de producción para el packaging e-commerce. Con ello, se intentará evitar caer en las premisas antes descritas, aunque somos conscientes que somos humanos y la perfección no existe, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Periodate oxidation of nanofibrillated cellulose films for active packaging applications

  • Fernández Santos, Julia
  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
An alternative packaging material based on cellulose that possesses excellent barrier properties and is potentially useful for active packaging has been developed. Cellulose nanofibril was efficiently and selectively oxidized with sodium periodate generating reactive aldehyde groups. These groups formed hemiacetal and hemialdal bonds during film formation and, consequently, highly transparent, elastic and strong films were created even under moisture saturation conditions. The periodate oxidation treatment additionally decreased the polarity of the films and considerably enhanced their water barrier properties. Thus, the water contact angle of films treated for 3 and 6 h was 97° and 102°, their water drop test value was higher than in untreated film (viz., 138 and 141 min with 3 and 6 h of treatment) and their water vapour transmission rate was substantially better (3.31 and 0.78 g m-2 day-1 with 3 and 6 h, respectively). The presence of aldehyde groups facilitated immobilization of the enzyme laccase, which efficiently captures oxygen and prevents food decay as a result. Laccase-containing films oxidized 80 % of Methylene Blue colorant and retained their enzymatic activity after storage for 1 month and 12 reuse cycles, opening the door to the possible creation of a reusable packaging to replace the single-use packaging, This publication is part of the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/501100011033. The authors would also like to thank the consolidated research group AGAUR 2021 SGR 00852. The first author, J. Fernández-Santos, acknowledges the Universitat Politècnica de Catalunya and the Generalitat de Catalunya for the financial support of her predoctoral grant FI, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bionanocomposite films of nanocellulose with chitosan or alginate: Enhanced barrier properties and active packaging potential

  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
In this study, two biopolymers—alginate and chitosan—were combined with nanofibrillated cellulose (NFC) at varying concentrations (5–80%) to produce alginate-NFC and chitosan-NFC bionanocomposites. FTIR confirmed the good compatibility between NFC and the biopolymers. Subsequently, the optical, physical, and barrier properties relevant to packaging applications were evaluated. The incorporation of both biomacromolecules resulted in smoother and more transparent bionanocomposites. While a low concentration of alginate (5%) reduced both tensile strength and elongation at break, significant negative effects on these mechanical properties were only observed at higher chitosan loadings (50–80%). Surface hydrophobicity, evaluated by water drop test (WDT) and water contact angle (WCA), was also enhanced, reaching WCA values of 104° and 82° with 70% chitosan and alginate, respectively. Water vapor barrier performance (50% and 90% RH) improved only with chitosan addition, whereas grease barrier properties were enhanced exclusively by alginate. These contrasting effects are attributed to differences in surface free energy: chitosan increased the dispersive component of the bionanocomposites (up to 95%), while alginate introduced a strong polar character (65–82%). The results enabled insight into the interfacial interaction mechanisms among biopolymers in bionanocomposite matrices. Finally, both biopolymers provided oxygen scavenging capacity to bionanocomposites, making them promising candidates for active packaging applications—chitosan by increasing antioxidant activity, and alginate by facilitating the immobilization of an oxidoreductase-type enzyme, The authors would like to thank the consolidated research group AGAUR 2021 SGR 00852. Oriol Cusola and Cristina Valls are Serra Húnter Fellows, 9 - Indústria, Innovació i Infraestructura, 11 - Ciutats i Comunitats Sostenibles, 12 - Producció i Consum Responsables, 13 - Acció per al Clima, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Development of an electrowetting-on-dielectric cellulose-based conductive sensor using direct inkjet printed silver nanoparticles

  • Caro Pérez, Oriol
  • Roncero Vivero, María Blanca
  • Casals Terré, Jasmina
In the quest for sustainable and efficient solutions for modern electronics, flexible electronic devices have garnered global attention due to their potential to revolutionize various technological applications. The manufacturing of these devices poses significant challenges, particularly regarding environmental sustainability and ease of production. A novel method employing direct inkjet printing of silver nanoparticle (npAg) ink onto cellulose nanocrystal (CNC) substrates is presented, offering a promising alternative to conventional methods. This study demonstrates the ability of CNCs to serve as a flexible and biodegradable substrate that does not require complex post-printing treatments to achieve adequate electrical performance. This method was implemented in the fabrication of an electrowetting-on-dielectric (EWOD) device, achieving circuit patterns with high resolutions and reduced resistances. The findings not only validate the use of CNCs in flexible electronic applications but also underscore the potential of advanced printing techniques to develop flexible electronics that are environmentally sustainable and technically feasible, This research was funded by Spain’s Ministry of Science and Innovation and Spain’s State Research Agency under grant numbers PID2020-114070RB-I00 (CELLECOPROD), CPP2021-009021, and CTQ2017-84966-C2-1-R, supported by the State Research Agency of the Ministry of Economy, Industry and Competitiveness, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Valorization of waste paper sludge as a sustainable source for packaging applications

  • Quintana, Elisabet
  • Valls Vidal, Cristina
  • Roncero Vivero, María Blanca
Paper sludge consists mainly of wet short cellulose fibers that are lost during papermaking and of residual chemicals used in the manufacturing process that remain dissolved in the water. Each ton of paper generates about 40–50 kg of dry sludge, of which 70% is primary sludge. Paper production, which exceeded 400 million tons globally in 2020, generates vast volumes of solid waste. Primary sludge is usually fiber-rich and hence suitable to be recycled back into the papermaking process. However, if the sludge is to be disposed of in landfills, sustainable practices must be developed in order to recover the fibers as they are valuable source for manufacturing high value-added products. This study investigates the valorization of paper sludge discarded by a filter paper manufacturer, with the purpose of producing cellulose acetate films for food packaging. The process involves recovering cellulose fibers from the sludge, purifying them and through acetylation reaction produce cellulose acetate films. FTIR spectra confirmed successful acetylation of fibers and also that acetyl groups reduced the hydrophilicity of cellulose—the contact angle was increased to over 80° from 50° in native cellulose. The films exhibited very good water barrier properties at both 50% and 90% relative humidity (RH), Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This publication is part of the Project PID2020-114070RB-I00 (CELLECOPROD), funded by MCIN/ AEI/10.13039/501100011033. Elisabet Quintana is a Serra Húnter Fellow. Authors are grateful to PhD student Noemi Huete for kindly providing information about the composition of waste paper sludge, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluating the potential of ozone in creating functional groups on cellulose

  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
Several eucalyptus pulps (85% of cellulose) with different lignin and HexA content (unbleached, TCF and ECF) as well as cotton linters (97% of cellulose) were treated with ozone (at different pH and ozone doses) in order to modify its fibre-components. Special interest was given in the introduction of functional groups in carbohydrates. The presence of these groups was mainly identified by the chain scissions due to carbonyl groups (CSC=O) produced in cellulose during viscosity measurement. At a dose of 0.5% odp of ozone, the greatest amount of CSC=O (0.5) was created at acidic pH and with the ECF pulp, followed by the TCF (0.3) and by the unbleached (0.2). The same CSC=O (0.2) was obtained in cotton pulp. In this pulp, the ozone concentration had to be increased for the treatment to be effective. A further increase in the accessibility in both pulps was achieved by applying a washing stage between two ozone stages at 0.5% (0.5¿+¿0.5). With this treatment, the CSC=O was increased to 5.3 in the ECF, to 0.8 in the TCF and only to 0.3 in cotton. Brightness reversion and the amount of DNPH consumed were also used to verify the presence of functional groups. At 0.5¿+¿0.5, brightness reversion was increased from 16 to 55% in ECF, from 27 to 46% in TCF and from 7 to 31% in cotton. Therefore, it is shown that functional groups can be introduced by ozone in carbohydrates, but this effect strongly depends on the lignin, HexA and hemicellulose content, This publication is part of the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/501100011033. Authors are grateful to Torraspapel S.A. (Zaragoza, Spain), ENCE (Pontevedra, Spain) and CELESA (Tortosa, Spain) for supplying the pulp used. Special thanks are also due to the Serra Hunter Fellow to Oriol Cusola, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Ozone: a promising agent to functionalize cellulose

  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
Ozone is a well-known chemical agent used in pulp bleaching, where its role is to remove lignin although carbohydrates are also affected. Toe objective ofthis work was to modify cellulose with ozone in order to create new carbonyl groups that could provide new properties to this biopolymer. Two eucalyptus pulps with different content of hexenuronic acids (HexA) (ECF, TCF), and a high-cellulose content pulp (cotton linters) were ozone-treated. The presence of carbonyl groups was identified by the chain scissions (CSccc()) produced in cellulose during viscosity measurements and also by an increase in the amount of DNPH consumed by pulp fibres and an increase in pulp brightness reversion. At a <lose of 0.5% of ozone carbonyl groups were created in the three kinds of pulp but significantly higher amounts were introduced with two ozone stages at 0.5% (0.5+0.5). Different amounts of carbonyl groups were created depending on both, the HexA and hemicelluloses content. Thus, in the eucalyptus ECF bleached pulp the highest amounts offunctional groups were created, This publication is part of the project PID2020- 114070RB-I00 (CELLECOPROD), financed by MCIN/AEI/10.13039/501100011033, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Materials based on cellulose for e-commerce packaging

  • Escursell Martínez, Silvia
  • Valls Vidal, Cristina
  • Llorach-Massana, Pere
  • Roncero Vivero, María Blanca
As a result of the pandemic and the new tax on the use of plastics in the EU, the consumption of cellulose has increased, especially for cardboard boxes as e-commerce packaging. Due to this high demand, the price of cellulose is rising considerably. It is also worth considering that in order to avoid problems with breakage during product mobility, overpackaging and the generation of more waste is a problem to be taken into account. Nature has shown us that it can optimise resources and energy, finding a balance between form, matter and function without generating waste, and building resilient, collaborative, creative and sensory models together. In fact, artists such as Leonardo da Vinci or naturalist as Ernst Haeckel already devoted themselves to observing and studying nature as a turning point in their designs and paintings. Focusing on materials, scientists such as Lynn Margulis, Janine Benyus or Stefano Mancuso have demonstrated the variety and different reproduction processes in natural ecosystems, as well as the interdependent relationship between them. And even new methodologies go beyond sustainability, and there is already talk of regenerative culture and systemic design. In other words, achieving transformative innovation through a more holistic vision and in collaboration with different entities. Following these considerations, our approach is to apply these natural systems to e-commerce packaging, obtaining a greater variety of biomaterials. For this reason we present different proposals for materials based on cellulose, one of the most abundant and renewable biopolymers on earth. We will also analyse the differences between cellulose extracted from vegetable fibre and cellulose generated from bacteria. Their properties provide us with flexibility, strength, toughness, among others, and allow us to rethink the different production processes to adapt them to each type of product and avoid generating overpackaging, This publication is part of the project PID2020- 114070RB-I00 (CELLECOPROD), financed by MCIN/AEI/10.13039/501100011033, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Evaluation of the potential of paper fibres for better management of natural resources, Evaluación de la potencialidad de las fibras papeleras para una mejor gestión de los recursos naturales

  • Ferrá González, Mariana
  • Valls Vidal, Cristina
  • Carnicé Bañeres, Pilar
La industria papelera española está comprometida con el reciclaje y apuesta por cumplir con los objetivos de una economía circular. Pero la elevada demanda de fibras recuperadas ha creado un alto impacto en los precios de ésta, produciendo una subida en los costes y una reducción de su disponibilidad. Además, se suma la gran diversidad de tipologías de fibras que pueden encontrarse en el papel recuperado, lo que dificulta el control, y el aprovechamiento total de la materia prima. El objetivo de este trabajo es poder optimizar el uso de las fibras para producir un ahorro en costes de materia prima, buscando la similitud de propiedades entre las fibras recuperadas, manteniendo constantes las propiedades físicas y mecánicas del papel fabricado. La presente investigación se enmarca en un estudio de I+D+i orientado al conocimiento de la potencialidad de las fibras de papel recuperadas, en colaboración con la papelera Alier (Rosselló, Lleida). Se ha conseguido mejorar la gestión de la selección, compra y utilización de la materia prima, ya que establece una caracterización que las agrupa para conseguir el máximo rendimiento en fibra y mejores propiedades del producto final, con el consiguiente beneficio medioambiental de minimizar el residuo que va a vertedero, Objectius de Desenvolupament Sostenible::15 - Vida d'Ecosistemes Terrestres, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication

Fabricación de films para envasado de alimentos a partir de nanocelulosa y carboximetilcelulosa

  • Fernández Santos, Julia
  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
Se han obtenido films con propiedades barrera avanzadas a partir de mezclar nanocelulosa cristalina (CNC) con nanocelulosa fibrilar (CNF) y el derivado celulósico carboximetilcelulosa (CMC), con el fin de aplicarlos como posibles sustitutos del plástico en la industria del envasado de alimentos. Tanto la CNF como la CMC mejoraron las propiedades de los films de CNC en términos de propiedades ópticas (presentaron una mayor resistencia al paso de la luz UV) y de propiedades barrera (una mayor resistencia al agua, al vapor de agua y al oxígeno). Se han obtenido resultados muy interesantes de resistencia al vapor de agua en presencia de humedades relativas altas en films con presencia de CMC. Los films que contenían CMC o CNF han presentado resistencia al oxígeno hasta HR del 80 % y 60 %, respectivamente. Todos los films obtenidos han resultado biodegradables, facilitándose su biodegradabilidad en presencia de la CMC o la CNF, con el alto valor añadido a nivel ambiental y sobre la salud que este hecho supone, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Water-efficient formation of barrier films via airborne nanocelluloses

  • Cusola Aumedes, Oriol
  • Valls Vidal, Cristina
  • Roncero Vivero, María Blanca
This study introduces, for the first time, air-assisted deposition of cellulose nanocrystals (CNC) to create structured coatings on cellulose-based substrates. It first examines CNC hydration and dispersion at the air-water interface, detailing the transition from agglomerates to individual crystallites and the formation of coating layers. The structural and barrier properties of the resulting composites are then analyzed concerning CNC grammage. Results show that water rapidly penetrates CNC agglomerates, requiring less than a minute to loosen and individualize the CNC, enabling the formation of uniform coatings. CNC layer grammages of up to 90 g/m² are achieved within a short time. The structural characteristics of the CNC layers are assessed and correlated with their liquid and gas barrier properties. These coatings demonstrate exceptional barrier performance when reaching sufficient grammage, with oxygen transmission rates below 1 cc/m²·day, water vapor transmission rates as low as 130 g/m²·day, and air permeance up to 68 Bekk seconds. This innovative method facilitates the processing of complex materials with potential applications in packaging and membrane technologies, This publication is part of the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/501100011033. The authors would also like to thank the consolidated research group AGAUR 2021 SGR 00852, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Cellulose acetate films from chemo-enzymatic dissolving pulps

  • Quintana, Elisabet
  • Ago, Mariko
  • Valls Vidal, Cristina
  • Fernández Santos, Julia
  • Roncero Vivero, María Blanca
  • Rojas, Orlando J.
The purpose of this work is to obtain dissolving cellulose fibers that are suitable for the manufacturing of cellulose derivatives. Therefore, the combination of enzymatic and chemical treatments during the bleaching stage (lignin removal) and purification stage (hemicellulose removal) is proposed. The obtained dissolving cellulose was submitted to acetylation reactions, and then acetate films were prepared as an example of end product. Assessing the quality of acetate films, it was concluded that dissolving cellulose fibers had good properties and fulfilled the quality requirements. These satisfactory results were compared with acetate films obtained under same acetylation conditions, but the dissolving cellulose fibers used as a raw material came from a conventional and industrial process., This publication is part of the PID2020-114070RB-I00 (CELLECOPROD) project, funded by MCIN/AEI/10.13039/501100011033. O.J.R. acknowledges funding support by the Academy of Finland through its Center of Excellence Program (2014–2019) “Molecular Engineering of Biosynthetic Hybrid Materials Research”., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Non-invasive multiparametric approach to determine sweat-blood lactate bioequivalence

  • Rabost Garcia, Genís
  • Colmena, Valeria
  • Aguilar Torán, Javier
  • Vieyra Galí, Joan
  • Punter Villagrasa, Jaime
  • Casals Terré, Jasmina
  • Miribel Català, Pere
  • Muñoz Pascual, Xavier
  • Cadefau, Joan
  • Padullés, Josep
  • Brotons Cuixart, Daniel
Many sweat-based wearable monitoring systems have been recently proposed, but the data provided by those systems often lack a reliable and meaningful relation to standardized blood values. One clear example is lactate, a relevant biomarker for both sports and health sectors, with a complex sweat–blood bioequivalence. This limitation decreases its individual significance as a sweat-based biomarker. Taking into account the insights of previous studies, a multiparametric methodology has been proposed to predict blood lactate from non-invasive independent sensors: sweat lactate, sweat rate, and heart rate. The bioequivalence study was performed with a large set of volunteers (>30 subjects) in collaboration with sports institutions (Institut Nacional d’Educació Física de Catalunya, INEFC, and Centre d’Alt Rendiment, CAR, located in Spain). A neural network algorithm was used to predict blood lactate values from the sensor data and subject metadata. The developed methodology reliably and accurately predicted blood lactate absolute values, only adding 0.3 mM of accumulated error when compared to portable blood lactate meters, the current gold standard for sports clinicians. The approach proposed in this work, along with an integrated platform for sweat monitoring, will have a strong impact on the sports and health fields as an autonomous, real-time, and continuous monitoring tool, The authors kindly acknowledge the support from the Spanish Ministerio de Indústria, Energía y Turismo (AEI Clusters Program, AEI2009L1CA011), Ministerio de Ciencia y Innovació n (PID2020-114070RB-I00), Agencia Estatal de Investigación (RED2018-102829-T and CPP2021-009021), and AGAUR (2019 DI 18 and 2021PROD00064), Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Promising nanocomposites for food packaging based on cellulose-PCL films reinforced by using ZnO nanoparticles in an ionic liquid

  • Amini, Elahe
  • Valls Vidal, Cristina
  • Roncero Vivero, María Blanca
The fact that most composites consist of polluting synthetic materials has prompted a search for biodegradable replacements based on cellulose fibers and polycaprolactone as potential packaging materials. In this work, we developed a green, efficient approach to rendering hydrophobic polycaprolactone (PCL) compatible with hy- drophilic cellulose fibers by using an ionic liquid as a nanowelding agent in the presence of zinc oxide nano- particles (ZnONPs). Transparent biobased nanocomposite films were thus directly obtained by in situ ring- opening polymerization (ROP) of e-caprolactone (CL) monomers onto the dissolved cellulose matrix by using the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac). [EMIM]Ac and ZnONPs were efficiently catalyzed e-caprolactone ROP under mild conditions. Cellulose-grafted PCL nanocomposite films were obtained by adding variable amounts of CL and ZnONPs to the cellulose matrix. The maximum grafting of 40% was achieved by using 5¦wt% ZnONPs and 70% CL. FTIR spectra confirmed the presence of PCL in the nano- composites. Also, FE-SEM revealed uniform dispersion of ZnONPs and PCL in the regenerated cellulose matrix, and trapping of nanoparticles in nanofibrils after the cellulose matrix was regenerated. X-ray diffraction (XRD) spectra showed a decreased apparent crystallinity and crystallite size. The XRD results also confirmed that the crystal properties of the nanocomposite films and an all-cellulose composite (ACC) were almost identical. The mechanical, barrier and optical properties of the nanocomposite films were significantly better than those of the ACC film by effect of the incorporation of ZnONPs and PCL especially with 5¦wt% ZnONPs and 70% CL). The nanocomposite films exhibited acceptable antioxidant activity and UV-light barrier properties, so they hold promise for used in food packaging. Nanocomposite films are in fact multifunctional materials with the potential for use in cellulose-based food packaging by virtue of their being transparent and bio-based, and possessing very good water vapor and oxygen barrier properties., This publication is part of the PID2020-114070RB-I00 (CELLECO- PROD) project, funded by MCIN/AEI/10.13039/ 501100011033. The first author, E. Amini, gratefully acknowledges the Universitat Politècnica de Catalunya and Banco Santander for the financial support of her predoctoral grant FPI-UPC, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Enhanced selectivity of a 3D-printed microfluidic gas detector towards different volatile organic compounds (VOCs) for the effective monitoring of indoor air quality in vehicles

  • Perarnau Ollé, Enric
  • Farré Lladós, Josep
  • Casals Terré, Jasmina
  • López Martínez, Joan Antoni
In the age of connected mobility, monitoring volatile organic compounds (VOCs) inside the vehicle plays a pivotal role in effectively controlling in-cabin air quality conditions. In this context, it is imperative to develop new monitoring devices that not only detect VOCs at low concentrations, but also can discern those compounds that pose a major risk to the health and comfort of occupants. Microfluidic gas detectors have recently emerged as a promising solution for the cost-effective discretization of VOCs in interior environments. Although microfluidic gas detectors may not yet reach the accuracy of other analytical methods, these devices offer a simple and compact design, can work at room-temperature, and do not require a carrier gas to operate; which represent a clear competitive advantage for their implementation in the vehicle. This work intends to study the feasibility of a 3D-printed microfluidic gas detector for the semi-selective detection of VOCs inside the vehicle cabin. In particular, this research aims to analyze whether the selectivity of these devices can be improved by (i) optimizing the thickness of the polymer layer on the walls of the microchannel, and (ii) understanding the influence of the chemical affinity between VOCs and the coating polymer. Empirical results reveal that thicker polymer films enable to enhance and expand the retention capabilities of the microchannel. Additionally, the Hansen solubility parameters are presented as a suitable tool to analyze and determine how polymer-analyte affinity, in combination with other intrinsic properties of analytes, influences the elution of contaminants from the microfluidic channel as well., Authors of this work are thankful to SEAT S.A. for their support during the whole research project without further incidences or conflict of interests. This work was supported by: Agència de Gestió d'Ajuts Universitaris i de Recerca AGAUR (2018 DI 0102 and 2021PROD00064), the EIT Urban Mobility, European Commission (I-2020-31 20007), Ministerio de Ciencia e Innovación (PID2020-114070RB-I00), and the Agencia Estatal de Investigación (RED2018-102829-T and CPP2021-009021)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Transformation of a waste from the paper industry into a nanocellulosic material, Transformación de un residuo de la industria papelera en un material nanocelulósico

  • Huete Matute, Noemi
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
The constant search for productive improvements in the paper industry and the growing awareness of society about the problems derived from the use of fossil-based materials, are pushing the research efforts towards the development of renewable alternatives. On the one hand, several studies reported on lignocellulosic biomass as a sustainable alternative due to its high renewability, abundance, biodegradability, and low cost. On the other hand, the sludge produced during water treatments in a paper industry is a common residue which is usually discarded but can still contain high amounts of lignocellulosic material. The present study explores the revalorization of an industrial by-product coming from the water-treatment operations in a paper mill. The residue is used to obtain a nanocellulosic biomaterial, using cellulase-assisted enzymatic treatments in combination with mechanical processes. The results show that enzymatic treatments improve the processing of fibrillar nanocellulose (NCF), with an increase in the hydrophobic behavior of the NFC, giving rise to transparent films with reduced whiteness, in contrast to those which were simply refined. However, the obtained films showed a reduced tensile resistance. The enzymatic action prior to refining improves the obtaining of smaller fibres and increases the percentage of fines. Thus, a more homogeneous film formation is obtained, compared to a later enzymatic action. Several films with an increasing NFC content were produced and analyzed. Results indicate that an increasing NFC content rises the film density, air barrier, transparency, and water permeability and decreases whiteness and tensile strength. The study demonstrates that it is technically possible to use a waste from a paper wastewater treatment plant to produce NFC, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Ionic liquids-assisted bioconversion of lignocellulosic biomass for the development of value-added products

  • Amini, Elahe
  • Valls Vidal, Cristina
  • Roncero Vivero, María Blanca
Lignocellulosic biomass is the most abundant renewable and inexpensive source that can be used to produce biofuels and bioproducts. One of the major limitations of biomass valorisation is its recalcitrance to an efficient conversion due to its lignin-carbohydrate complex structure. This limitation causes technical and economic challenges for the conversion of lignocellulosic biomass into value-added products. Certain ionic liquids (ILs) have been proven to be effective solvents to deconstruct lignocellulosic biomass. The concerns over hazards of conventional volatile organic solvents can be overcome by ILs due to their unique and ‘green’ characteristics. Advancements in ionic liquid pretreatment may help to increase the productivity of lignocellulosic-based bioconversion. This review describes, at first, the potential of the most prominent types of ionic liquids and the impact of the cation/anion combination on their physiochemical properties. It then discusses the different approaches, which are followed for the dissolution and fractionation of three major components of lignocellulosic biomass using ionic liquids and categorize them based on the target application. Additionally, the optimal process parameters for ionic liquid pretreatment toward optimisation of the dissolution yield are mentioned. It finally highlights the challenges of using ionic liquid during its commercial use in biomass pretreatment and processing, specially the synthesis cost as the economic barrier. It is hoped that the highlights in future prospect and challenges of adopting IL in these processes will stimulate a wide range of research studies and collaborations, leading to significant industrial progress in this area, Special thanks are also due to the Serra Húnter Fellow to Cristina Valls and to the FPI-UPC awarded to Elahe Amini, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

EWOD Sensor for rapid quantification of marine dispersants in oil spill management

  • Caro Pérez, Oriol
  • Roncero Vivero, María Blanca
  • Casals Terré, Jasmina
In this study, we introduce a novel Electrowetting-on-Dielectric (EWOD) sensor designed to quantify marine dispersants at the spill point. The sensor quantifies changes in the surface tension of liquid droplets at varying dispersant concentrations through the deformation response of the droplet under applied voltage. Analyzed responses include droplet length and contact angle (CA) on the device surface upon sensor activation. This sensor offers significant advantages over existing chemical methods, which are costly and complex. Moreover, compared to conventional methods based on the same principle, it demonstrates enhanced sensitivity at low concentrations. Additionally, the sensor’s portability enables instantaneous and in situ measurements of marine dispersant concentrations, thus providing a crucial tool for effective oil spill response by facilitating on-site decision-making and offering higher temporal resolution for studies on the marine dispersant’s environmental impact. The device’s potential extends beyond marine dispersants to detecting various contaminants affecting surface tension. Its adaptability underscores the EWOD device’s role as a versatile tool for environmental monitoring and on-site analysis, addressing the urgent need for efficient and sustainable solutions in environmental management, The authors would like to thank Trafic Medioambiente (Madrid, Spain) for kindly providing the MK-Disper sample used in this study. Their support in supplying the dispersant was essential for the development of this research, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Materials and manufacturing methods for EWOD devices: current status and sustainability challenges

  • Caro Pérez, Oriol
  • Casals Terré, Jasmina
  • Roncero Vivero, María Blanca
Electrowetting-on-dielectric (EWOD) devices have proven to be effective tools for precise microfluidic manipulation or in liquid lenses that surpass conventional solid lenses in versatility. However, the fabrication of these devices presents many challenges, such as their scalability or the growing concern on their environmental impact due to materials used in their fabrication. This review provides a comprehensive analysis of the materials currently used in the fabrication of EWOD devices and the characteristics they must meet. In addition, a discussion of future challenges in the fabrication of EWOD devices is presented, in particular the environmental problems presented by some of the materials currently in use., The authors would like to acknowledge funding by Spain’s Ministry of Science and Innovation and Spain’s State Research Agency: PID2020-114070RB-I00 (CELLECOPROD)., Peer Reviewed, Postprint (published version)