Skip to main content

TECNICAS RADAR PARA LA OBSERVACION CONTINUA DE LA TIERRA: SISTEMAS Y PROCESADO

PID2020-117303GB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Decorrelation rate and daily cycle in sub-daily time series of SAR coherence amplitude

  • Villarroya-Carpio, Arturo
  • Lopez-Sanchez, Juan M.
  • Aguasca, Albert
  • Mas, Mireia
  • Fàbregas, Xavier
  • Broquetas, Antoni
  • Steele-Dunne, Susan C.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
A dataset of sub-daily C-band data, acquired with a ground-based synthetic aperture radar, has been used to study soil and vegetation dynamics during a complete growing season in a controlled agricultural test site. The data have been exploited to analyse the rate and sources of decorrelation in the scene, as well as the consequences of the observation conditions of a sub-daily satellite (with either low, medium or geosynchronous orbit): short revisit times, availability of multiple acquisitions during a single day, and shallow observations at some incidence angles. Repeat-pass coherence is found to be less affected by temporal decorrelation when the primary image is acquired during nighttime or the last hours predawn. Regarding the incidence angle, VV has increased sensitivity to certain phenological stages as the incidence angle increases. Additionally, a periodic oscillation on a sub-daily scale is observed when creating coherence time series with increasing temporal baseline. Factors which strongly contribute to these oscillations are the daily cycles of temperature, soil moisture and vegetation water dynamics.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Assessment of the Contribution of Polarimetric Persistent Scatterer Interferometry on Sentinel-1 Data

  • Luo, Jiayin
  • Lopez-Sanchez, Juan M.
  • De Zan, Francesco
  • Mallorquí Franquet, Jordi J.
  • Tomás, Roberto
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Time series of Sentinel-1 data are widely used for monitoring displacements of the Earth surface using persistent scatterer interferometry. By default over land, Sentinel-1 images include two polarimetric channels: VV and VH. However, most works in this application exploit only the VV channel, whereas the VH channel is discarded for its lower amplitude. Thanks to the development of polarimetric persistent scatterer interferometry methods, one can integrate multi-polarisation channels into a single optimal one. Previous studies proved that the number and spatial density of measurement points is increased. In this work, we explore the reason why the VH channel increases the number of measurement points when using the amplitude dispersion ( DA ) as selection criterion. Results obtained over three geographical locations show that the VH channel helps in two ways. In first place, the mean amplitude is increased for targets which have higher amplitude in VH channel, usually associated with rotated elements in the scene. In second place, and more importantly, the amplitude dispersion is decreased over many areas for which the VV channel exhibits fluctuations and peaks. Thanks to the insensitivity of the VH channel to these scene changes, it provides additional measurement points which are reliable despite their low amplitude. The increment of measurement points not only extends the spatial density and enables the detection of active deformation areas not found in the VV results, but also provides more accurate results than only using the VV channel, thanks to the increased density of points, which helps the deformation estimation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Monitoring Corn Crop Height and Growth Rate With Interferometric Coherence

  • Mas, Mireia
  • Broquetas, Antoni
  • Fàbregas, Xavier
  • Aguasca, Albert
  • Llop, Jordi
  • Liu, Jinglong
  • Mallorquí Franquet, Jordi J.
  • Villarroya-Carpio, Arturo
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Future radar Earth Observation missions, with reduced revisit times, will offer the capability to obtain valuable data applicable to agriculture and meteorology. They will contribute to a better understanding of some observed changes that exhibit time scales much shorter than present satellite revisit times. In the context of the preparatory studies in support of future radar mission proposals with reduced revisit time, such as the geosynchronous Hydroterra, the HydroSoil facility has been set up for C-Band radar continuous monitoring of crops with a time resolution of 10 minutes and a spatial resolution of 1m2. The data obtained for a corn crop observed along the life cycle has been analysed to model radar backscattering dependence on crop development parameters. In this study, it is particularly noticeable that the interferometric coherence was measured over a 24-hour interval, in contrast to previous studies. Coherence has shown a strong sensitivity to plant height and the phenological stage of the crop, which can be exploited to sense crop growth with radar measurements. However, due to the high density and size of the developed corn canopy, the relationship between coherence and crop height is limited to the first corn stages. For this reason, a new parameter named daily growth rate has been defined and found to be well correlated with the radar coherence.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Assessment of the Impact of Long Integration Time in Geosynchronous SAR Imagery of Agricultural Fields by Means of GB-SAR Data

  • Aguasca, Albert
  • Broquetas, Antoni
  • Lopez-Sanchez, Juan M.
  • Fàbregas, Xavier
  • Mallorquí Franquet, Jordi J.
  • Mas, Mireia
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Geosynchronous Synthetic Aperture Radar (GeoSAR) missions offer the advantage of near-continuous monitoring of specific regions on Earth, making them essential for applications that require continuous information. However, wind induced motion along the inherent long integration time can result in image defocusing, with potential degradation of retrieved information. This paper aims to investigate the impact of GEOSAR long integration time in Synthetic Aperture Radar (SAR) imaging and derived products (time series of backscatter and coherence) required to extract agriculture relevant soil or crop parameters of interest. The study is based on the extensive HydroSoil data acquisition campaign carried out over barley and corn crops, funded by the European Space Agency (ESA). The collected raw data are used to synthesize equivalent apertures with integration times of up to 4 hours, similar to those acquired with a GeoSAR. These Ultra Slow apertures facilitate the assessment of the impact of agricultural scene decorrelation on the generation of images with extended integration times.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Sequential polarimetric phase optimization algorithm for dynamic deformation monitoring of landslides

  • Wang, Yian
  • Luo, Jiayin
  • Dong, Jie
  • Mallorquí Franquet, Jordi J.
  • Liao, Mingsheng
  • Zhang, Lu
  • Gong, Jianya
In the era of big SAR data, it is urgent to develop dynamic time series DInSAR processing procedures for near-real-time monitoring of landslides. However, the dense vegetation coverage in mountainous areas causes severe decorrelations, which demands high precision and efficiency of phase optimization processing. The common phase optimization using single-polarization SAR data cannot produce satisfactory results due to the limited statistical samples in some natural scenarios. The novel polarimetric phase optimization algorithms, however, have low computational efficiency, limiting their applications in large-scale scenarios and long data sequences. In addition, temporal changes in the scattering properties of ground features and the continuous increase of SAR data require dynamic phase optimization processing. To achieve efficient phase optimization for dynamic DInSAR time series analysis, we combine the Sequential Estimator (SE) with the Total Power (TP) polarization stacking method and solve it using eigen decomposition-based Maximum Likelihood Estimator (EMI), named SETP-EMI. The simulation and real data experiments demonstrate the significant improvements of the SETP-EMI method in precision and efficiency compared to the EMI and TP-EMI methods. The SETP-EMI exhibits an increase of more than 50% and 20% in highly coherent points for the real data compared to the EMI and TP-EMI, respectively. It, meanwhile, achieves approximately six and two times more efficient than the EMI and TP-EMI methods in the real data case. These results highlight the effectiveness of the SETP-EMI method in promptly capturing and analyzing evolving landslide deformations, providing valuable insights for real-time monitoring and decision-making.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Range Spectral Filtering in SAR Interferometry: Methods and Limitations

  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Mallorquí Franquet, Jordi J.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
A geometrical decorrelation constitutes one of the sources of noise present in Synthetic Aperture Radar (SAR) interferograms. It comes from the different incidence angles of the two images used to form the interferograms, which cause a spectral (frequency) shift between them. A geometrical decorrelation must be compensated by a specific filtering technique known as range filtering, the goal of which is to estimate this spectral displacement and retain only the common parts of the images’ spectra, reducing the noise and improving the quality of the interferograms. Multiple range filters have been proposed in the literature. The most widely used methods are an adaptive filter approach, which estimates the spectral shift directly from the data; a method based on orbital information, which assumes a constant-slope (or flat) terrain; and slope-adaptive algorithms, which consider both orbital information and auxiliary topographic data. Their advantages and limitations are analyzed in this manuscript and, additionally, a new, more refined approach is proposed. Its goal is to enhance the filtering process by automatically adapting the filter to all types of surface variations using a multi-scale strategy. A pair of RADARSAT-2 images that mapped the mountainous area around the Etna volcano (Italy) are used for the study. The results show that filtering accuracy is improved with the new method including the steepest areas and vegetation-covered regions in which the performance of the original methods is limited.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adaptive polarimetric optimization for ground deformation monitoring using multi-temporal InSAR with dual-polarization sentinel-1

  • Zhang, L.
  • Zhao, F.
  • Wang, Y.
  • Mallorqui, J.J.
  • Wang, T.
  • Hu, Z.
  • Du, S.
  • Fernández Torres, J.
Sentinel-1 data has been widely employed for monitoring large-scale ground deformation with multi-temporal InSAR (MTI). The development of polarimetric MTI (PolMTI) methods has made it possible to combine both VV and VH channels for better ground deformation monitoring with Sentinel-1 data. However, traditional high-efficiency PolMTI methods cannot adaptively optimize both persistent scatterer (PS) and distributed scatterer (DS), while existing adaptive methods have high computational burdens. To address these challenges, we propose an adaptive coherency matrix decomposition method for PolMTI (ADCMD-PolMTI), a novel algorithm that adaptively and effectively optimizes phase of both PS and DS pixels. Applied to Southern California, ADCMD-PolMTI markedly improves interferometric phase quality and achieves a 494% increase in high-quality pixel density compared to the single-polarimetric VV method. Additionally, it demonstrates enhanced ground deformation monitoring accuracy, as evidenced by a lower average RMSE compared to the VV and minimum mean square error (MMSE) methods when comparing against GPS data. While achieving a nearly equivalent number of monitoring pixels as the optimal exhaustive search polarimetric optimization (ESPO) algorithm, ADCMD-PolMTI operates 235 and 13 times faster for PSs and DSs, respectively. With its good adaptive optimization capabilities and computational efficiency, ADCMD-PolMTI offers an advanced solution for large-scale ground deformation monitoring., We would like to thank ESA (European Space Agency) for supplying the Sentinel-1 datasets. The GNSS/GPS data used were from the SCIGN website. Some figures were prepared using the public domain GMT software (Wessel and Smith, 1998). The DEMs were from the Shuttle Radar Topography Mission. Optical images were provided by Google Earth. This work was funded by National Key R&D Program of China (grant number 2022YFE0102600), by the National Natural Science Foundation of China (grant number U22A20598), by China Postdoctoral Science Foundation (grant numbers 2023T160685, 2020M671646), by National Natural Science Foundation of China (grant number 42004011), by Young Elite Scientists Sponsorship Program by CAST (grant number 2023QNRC001-YESS20230599), by XinJiang key research and development program (grant number 2022B03003-1) and in part by the China Scholarship Council (grant number 202306420009). This work was supported by the Spanish Ministry of Science and Innovation (State Agency of Research, AEI) and the European Funds for Regional Development (ERFD) under Project (PID2020-117303GB-C21/AEI/10.13039/501100011033). And this research has be also partially supported by grant G2HOTSPOTS (PID2021-122142OB-I00) from the MCIN/AEI/10.13039/501100011033/FEDER, UE, by the Construction Program of Space-Air-Ground-Well Cooperative Awareness Spatial Information Project (grant number B20046).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Advancing coal fire detection model for large-scale areas based on RS indices and machine learning

  • Liu, Jinglong
  • Zhao, Feng
  • Wang, Yunjia
  • Wang, Yanan
  • Du, Sen
  • Dang, Libo
  • Mallorqui, Jordi J.
Coal fires present significant global environmental and energy challenges, posing substantial barriers to achieving carbon-neutral goals. Thermal Infrared Remote Sensing (TIRS) technology, which is used to retrieve land surface temperatures, plays a crucial role in detecting coal fires. However, its accuracy suffers from solar radiation interference. In addition, there is limited research focused specifically on detecting coal fires over large areas. In this paper, thermal anomaly indices (TAIs), derived from short-wave infrared and near-infrared data, were selected for coal fire detection due to their relatively low sensitivity to solar radiation. Using these TAIs alongside other remote sensing (RS) indices, a coal fire detection model (CFDM) was developed and trained using the AutoGluon machine learning (ML) framework. The model is capable of identifying large-scale coal fire target areas without relying on deformation associated with coal fires. CFDM outperformed other ML algorithms, achieving Recall, Precision, F1-score, and Kappa coefficient values of 0.89, 0.94, 0.93, and 0.92, respectively. Shapley Additive Explanations (SHAP) were used to evaluate the importance of different features, validating the model's reliability and interoperability. The model's robustness has been further demonstrated using observed coal fire points over Xinjiang, China, and Jharkhand, India. A T-test confirms that the proposed CFDM is significantly superior to TAIs-based methods, offering better differentiation of coal fires from other thermal anomalies and reducing commission errors., This work was supported by the National Natural Science Foundation of China (Grant No. 52474184, 42474018, U22A20598), Spanish Ministry of Science and Innovation (State Agency of Research, AEI) and the European Funds for Regional Development (ERFD) under Project PID 2020-117303GB-C21, Grant PRE2021-097981. China Postdoctoral Science Foundation (Grant No. 2023T160685, 2020M671646), Young Elite Scientists Sponsorship Program by CAST (Grant No. 2023QNRC001 -YESS20230599), National Key R&D Program of China (Grant No. 2022YFE0102600) and the Construction Program of Space-Air-Ground-Well Cooperative Awareness Spatial Information Project (B20046) also support this work. The authors are grateful to the European Space Agency (ESA), Google Earth Engine (GEE), the National Aeronautics and Space Administration (NASA) for the provision of RS data, products, and online computations., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Monitoring corn crop height and growth rate with interferometric coherence

  • Mas i Méndez, Mireia|||0000-0001-6679-3961
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
  • Fabregas Canovas, Francisco Javier|||0000-0002-7654-9695
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Llop Casamada, Jordi|||0000-0001-9033-3770
  • Liu, Jinglong|||0009-0009-1083-0685
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Villarroya Carpio, Arturo
  • López Sánchez, Juan Manuel
Future radar Earth observation missions, with reduced revisit times, will offer the capability to obtain valuable data applicable to agriculture and meteorology. They will contribute to a better understanding of some observed changes that exhibit time scales much shorter than present satellite revisit times. In the context of the preparatory studies in support of future radar mission proposals with reduced revisit time, such as the geosynchronous HydroTerra, the HydroSoil facility has been set up for C-band radar continuous monitoring of crops with a time resolution of 10 min and a spatial resolution of 1 m2. The data obtained for a corn crop observed along the life cycle has been analyzed to model radar backscattering dependence on crop development parameters. In this study, it is particularly noticeable that the interferometric coherence was measured over a 24-h interval, in contrast to previous studies. Coherence has shown a strong sensitivity to plant height and the phenological stage of the crop, which can be exploited to sense crop growth with radar measurements. However, due to the high density and size of the developed corn canopy, the relationship between coherence and crop height is limited to the first corn stages. For this reason, a new parameter named daily growth rate has been defined and found to be well correlated with the radar coherence., This work was supported in part by the European Space Agency (ESA Contract 4000132509/20/NL/FF/ab with UPC), in part by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu MDM-2016-0600 and under Project PID2020-117303GB-C21/AEI/10.13039/501100011033 and Project PID2020-117303GB-C22/AEI/10.13039/501100011033, in part by the Catalan Government under Grant 2022 FI AGAUR (BDNS 585689), and in part by the Spanish Ministry of Science and Innovation under Grant 2021 FI (PRE2021-098957)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Multistatic SAR imaging and precise orbit determination synergies using geostationary telecommunication satellites

  • Carreño Megias, Xavier
  • Nicolás Álvarez, Jorge|||0000-0001-6143-1515
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
Low Earth Orbit (LEO) remote sensing missions present a main limitation regarding their revisit time of several days or weeks. They cannot provide continuous monitoring over the same area of the planet. The on-going studies on Geosynchronous Synthetic Aperture Radar (GEOSAR), which have a revisit time of less than 24 h, aim to mitigate this limitation [1]. Since high altitude GEO missions are beyond MEO navigation satellites coverage, a ground based interferometric system (GEODE) has been developed for GEO Precise Orbit Determination, a requirement to form focused GEOSAR synthetic apertures [2]. Since no operational GEOSAR missions are available yet, present Geostationary telecommunications satellites can be used as transmitters of opportunity for GEODE experimental testing and validation. Recent results show the convenience of using ground reflectors to extend interferometric baselines lengths up to kilometers to achieve the required GEOSAR orbit precision. Locating stable reflectors of opportunity for interferometric orbit determination in urban areas is possible by complementing the ground interferometer with a multistatic SAR imaging processor capable to map the surrounding scattering centers. In this paper we present a new multifunction observation system capable of both GEO orbit determination and multistatic SAR imaging using Geostationary Telecommunication satellites. Bistatic SAR imaging based on GEO satellites was already demonstrated by POLIMI research group in [3], in our case, improved SAR images are obtained thanks to the system capability to precisely determine the satellites orbits. The paper presents and discuss the interesting synergies resulting from the integration in the same instrument of multistatic SAR imaging and interferometric orbit determination., This work has been supported by the Spanish Science, Research and Innovation Plan (MICINN) with Project Codes TEC2017-85244-C2-2-P and PID2020- 117303GB-C21 and by Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigacion, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Contactless acquisition and decoupling of respiratory and cardiac signals using a 122 GHz FMCW radar

  • Miró Mezquita, Laura|||0009-0000-1524-2940
  • Wu, Ruochen|||0000-0003-0852-424X
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
  • Garcia Garcia, Cosme
  • Estrada Cuxart, Oriol
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
This paper presents a contactless method for the simultaneous monitoring of heart rate (HR) and respiratory rate (RR) using a Frequency Modulated Continuous Wave (FMCW) radar operating at 122.5 GHz. To address the challenges posed by spectral overlap and interference between cardiac and respiratory components, we introduce a signal separation and estimation framework based on Maximum Likelihood Estimation (MLE) combined with an orthogonal projection technique. The approach models the thoracic displacement captured by the radar as the superposition of periodic sources and applies spectral projection to isolate the fundamental frequencies and their harmonics. Theoretical performance is assessed through the derivation of the Cramér-Rao Lower Bound (CRLB) and extensive Monte Carlo simulations under varying SNR and sample size conditions. Experimental validation was conducted on 23 healthy volunteers, each providing two 20 second recordings, using a clinical-grade reference monitor. The method achieves high estimation accuracy, with a mean absolute error of 0.69 bpm for HR and 0.33 bpm for RR. The algorithm is capable of reconstructing the cardiac pulse waveform while preserving key morphological features such as the systolic peak and dicrotic notch. Furthermore, the use of the projection technique further enhanced estimation accuracy under nonphysiological conditions, including both elevated and reduced rates. These findings demonstrate the potential of the proposed method as a reliable tool for contactless monitoring of vital signs and support its future integration into biomedical applications., This work was supported by the Industrial Doctorates Plan of the Department of Research and Universities of the Generalitat de Catalunya, and is part of the I+D+i project 6-SENSES (PID2022-138648OB-I00) funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU. It is also supported by the Spanish MCIN project PID2020-117303GB-C21, funded by AEI/10.13039/501100011033, and by the China Scholarship Council (CSC) under Grant 202208390068., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Sequential polarimetric phase optimization algorithm for dynamic deformation monitoring of landslides

  • Wang, Yian
  • Luo, Jiayin
  • Dong, Jie
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Liao, Mingsheng
  • Zhang, Lu
  • Gong, Jianya
In the era of big SAR data, it is urgent to develop dynamic time series DInSAR processing procedures for near-real-time monitoring of landslides. However, the dense vegetation coverage in mountainous areas causes severe decorrelations, which demands high precision and efficiency of phase optimization processing. The common phase optimization using single-polarization SAR data cannot produce satisfactory results due to the limited statistical samples in some natural scenarios. The novel polarimetric phase optimization algorithms, however, have low computational efficiency, limiting their applications in large-scale scenarios and long data sequences. In addition, temporal changes in the scattering properties of ground features and the continuous increase of SAR data require dynamic phase optimization processing. To achieve efficient phase optimization for dynamic DInSAR time series analysis, we combine the Sequential Estimator (SE) with the Total Power (TP) polarization stacking method and solve it using eigen decomposition-based Maximum Likelihood Estimator (EMI), named SETP-EMI. The simulation and real data experiments demonstrate the significant improvements of the SETP-EMI method in precision and efficiency compared to the EMI and TP-EMI methods. The SETP-EMI exhibits an increase of more than 50% and 20% in highly coherent points for the real data compared to the EMI and TP-EMI, respectively. It, meanwhile, achieves approximately six and two times more efficient than the EMI and TP-EMI methods in the real data case. These results highlight the effectiveness of the SETP-EMI method in promptly capturing and analyzing evolving landslide deformations, providing valuable insights for real-time monitoring and decision-making., This work was supported by the National Natural Science Foundation of China (grant number 42374013), the Spanish Ministry of Science and Innovation (State Agency of Research, AEI) and the European Funds for Regional Development (ERFD) under Project PID2020-117303GB-C21/AEI/10.13039/501100011033. Thanks for the financial support from the program of the China Scholarships Council (No.202206270025). In addition, we also thank the European Space Agency (ESA) for providing the Sentinel-1 data under the framework of the Sino-EU Dragon Project (id 59332) and Andrew Hooper for sharing the StaMPS programs. Thanks to Yalong River Hydropower Development Co., Ltd for providing the landslide field survey results and water level data., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An anchor-free feature-enhanced network for arbitrary oriented ship detection in high resolution SAR images

  • Qiu, Yu|||0000-0003-0780-993X
  • Zou, Bin
  • Zhang, Lamei
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
Ship detection in synthetic aperture radar (SAR) images plays a crucial role in maritime transportation. However, SAR ship detection faces challenges, such as diverse ship scales, complex background environments, severe noise interference, and the difficulty of distinguishing densely docked ships, all of which hinder the precision of ship target detection. To address these issues, an anchor-free feature-enhanced network for arbitrary-oriented ship detection (AFFE-AOSD) is proposed, which significantly enhances the detection performance for multiscale ship targets and densely docked ship formations, while also improving angle estimation accuracy. First, we designed an efficient feature integration module to enrich gradient flows, tailored specifically for the ship target detection task. This improves the detection of small targets. In addition, to enable more precise angle estimation, a two-stage angle prediction module with two stage circular smooth label is introduced. Furthermore, an angle-aware dynamic sample assignment method and an associated loss function that consider angles have been devised to improve the network’s accuracy in rotation predictions. Experiments on SSDD+ and RSDD datasets demonstrate significant improvements: AFFE-AOSD outperforms the baseline on SSDD+, improving precision by 3%, F1 score by 5.1%, and AP50 by 4.7%, and achieves the best angle prediction accuracy on RSDD with a mean error of 4.47° and a median error of 2°.Moreover, the proposed method consistently achieves real-time inference speeds exceeding 55 frame per second across different scenes, confirming its effectiveness in balancing accuracy and efficiency for practical maritime applications., This work was supported in part by the National Natural Science Foundation of China under Grant 62271172, in part by China Scholarship Council (CSC) under Grant 202306120088, and in part by the Spanish MCINN and AEI under Project PID2020-117303GB-C21/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Facility for continuous agricultural field monitoring with a GB-PolSAR

  • Mas i Méndez, Mireia|||0000-0001-6679-3961
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
  • Fabregas Canovas, Francisco Javier|||0000-0002-7654-9695
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Llop Casamada, Jordi|||0000-0001-9033-3770
  • López Sánchez, Juan Manuel
  • Kubanek, Julia
Current climate and weather changes urged the scientific community to find ways to observe and understand the relatively rapid land-atmosphere processes related to the water cycle. The HydroSoil project, funded by the European Space Agency, was proposed to experimentally assess the use of Synthetic Aperture Radar in future short revisit time missions based on Geosynchronous Orbital platforms. This article describes the HydroSoil facility providing continuous monitoring of an agricultural field with a 10-min temporal resolution and a spatial resolution in the order of 1 m2. Gathered data from the full Pol Ground-Based SAR are being used to investigate the capability of Geosynchronous SAR missions to retrieve soil moisture and to measure vegetation parameters. To achieve the project's objectives, intensive procurement of ground truth data encompassing continuous acquisition of relevant meteorological parameters such as air humidity, temperature, precipitation wind speed and direction, pressure, and solar irradiation together with other vegetation characteristics under study has been mandatory. The different densities, sizes, and water content of two different crops, barley and corn, together with the data generated, will enable the assessment of the missions’ ability to extract essential scene characteristics, such as soil moisture and crop water content, for use in future geostationary missions., This work was supported in part by the European Space Agency (ESA Contract 4000132509/20/NL/FF/ab with UPC), and in part by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu under Grant MDM2016-0600, Project PID2020-117303GB-C21/AEI/10.13039/501100011033, and Project PID2020-117303GB-C22/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Advancing coal fire detection model for large-scale areas based on RS indices and machine learning

  • Liu, Jinglong|||0009-0009-1083-0685
  • Zhao, Feng
  • Wang, Yunjia
  • Du, Sen
  • Wang, Yanan
  • Dang, Libo
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
Coal fires present significant global environmental and energy challenges, posing substantial barriers to achieving carbon-neutral goals. Thermal Infrared Remote Sensing (TIRS) technology, which is used to retrieve land surface temperatures, plays a crucial role in detecting coal fires. However, its accuracy suffers from solar radiation interference. In addition, there is limited research focused specifically on detecting coal fires over large areas. In this paper, thermal anomaly indices (TAIs), derived from short-wave infrared and near-infrared data, were selected for coal fire detection due to their relatively low sensitivity to solar radiation. Using these TAIs alongside other remote sensing (RS) indices, a coal fire detection model (CFDM) was developed and trained using the AutoGluon machine learning (ML) framework. The model is capable of identifying large-scale coal fire target areas without relying on deformation associated with coal fires. CFDM outperformed other ML algorithms, achieving Recall, Precision, F1-score, and Kappa coefficient values of 0.89, 0.94, 0.93, and 0.92, respectively. Shapley Additive Explanations (SHAP) were used to evaluate the importance of different features, validating the model’s reliability and interoperability. The model’s robustness has been further demonstrated using observed coal fire points over Xinjiang, China, and Jharkhand, India. A T-test confirms that the proposed CFDM is significantly superior to TAIs-based methods, offering better differentiation of coal fires from other thermal anomalies and reducing commission errors., This work was supported by the National Natural Science Foundation of China (Grant No. 52474184, 42474018, U22A20598), Spanish Ministry of Science and Innovation (State Agency of Research, AEI) and the European Funds for Regional Development (ERFD) under Project PID 2020-117303GB-C21, Grant PRE2021-097981. China Postdoctoral Science Foundation (Grant No. 2023T160685, 2020M671646), Young Elite Scientists Sponsorship Program by CAST (Grant No. 2023QNRC001 -YESS20230599), National Key R&D Program of China (Grant No. 2022YFE0102600) and the Construction Program of Space-Air-Ground-Well Cooperative Awareness Spatial Information Project (B20046) also support this work. The authors are grateful to the European Space Agency (ESA), Google Earth Engine (GEE), the National Aeronautics and Space Administration (NASA) for the provision of RS data, products, and online computations.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

ACE-OT: Polarimetric SAR data based amplitude contrast enhancement algorithm for offset tracking applications

  • Du, Sen
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Zhao, Feng
The use of polarimetric synthetic aperture radar (SAR) data can improve the performance of persistent scatterer interferometry (PSI). However, its huge potential remains locked for the amplitude information-based offset tracking (OT) technology. For example, to the best knowledge of the authors, there is no single example of a polarization-based image optimization method that has been developed for OT processing. In this article, an amplitude contrast enhancement (ACE) algorithm is introduced, which demonstrates the potential of the polarimetric SAR data on the improvement of OT performance. Its core idea is finding the optimal combination of the different scattering mechanisms for each pixel to improve the contrast. First, the orientation of the reflected polarization ellipse is removed, to avoid the influence of the geometric relationship between the antenna and the target, and the properties of the target. Then three similarity parameters are defined to represent the three basic reflection types of the single bounce, the double bounce, and the random reflection. After that, the optimizing equation is constructed with two optimizing vectors. Finally, the optimizing vectors are calculated to obtain the enhanced amplitude image. Three examples of the enhancement are presented with different PolSAR images sets of both full- (Radarsat-2) and dual-polarization (TerraSAR-X and Sentinel-1). The performance of ACE-OT has been compared with another method, the adaptive histogram enhancement (AHE). The impact of the number of polarization channels available on ACE-OT performance has also been studied., This work was supported in part by the China Scholarship Council under Grant 201806420035, in part by the Spanish Ministry of Science and Innovation (MCIN), in part by the State Research Agency (AEI) Project under Grant PID2020-117303GB-C21 and Grant MCIN/AEI/10.13039/501100011033, in part by the National Natural Science Foundation of China under Grant 42004011, in part by the China Postdoctoral Science Foundation under Grant 2020M671646, and in part by the Construction Program of Space-Air-Ground-Well Cooperative Awareness Spatial Information Project under Grant B20046., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Improved photosynthetic accumulation models for biomass estimation of Soybean and Cotton using vegetation indices and canopy height

  • Liu, Jinglong|||0009-0009-1083-0685
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Fabregas Canovas, Francisco Javier|||0000-0002-7654-9695
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
  • Llop Casamada, Jordi|||0000-0001-9033-3770
  • Mas i Méndez, Mireia|||0000-0001-6679-3961
  • Zhao, Feng
  • Wang, Yanan
Most crops accumulate above-ground biomass (AGB) through photosynthesis, inspiring the development of the Photosynthetic Accumulation Model (PAM) and Simplified PAM (SPAM). Both models estimate AGB based on time-series optical vegetation indices (VIs) and canopy height. To further enhance the model performance and evaluate its applicability across different crop types, an improved PAM model (IPAM) is proposed with three strategies. They are as follows: (i) using numerical integration to reduce reliance on dense observations, (¿¿ ) introduction of Fibonacci sequence-based structural correction to improve model accuracy, and (¿¿¿ ) non-photosynthetic area masking to reduce overestimation. Results from both soybean and cotton demonstrate the strong performance of the PAM-series models. Among them, the proposed IPAM model achieved higher accuracy, with mean ¿2 and RMSE values of 0.89 and 207 g/m2 for soybean and 0.84 and 251 g/m2 for cotton, respectively. Among the vegetation indices tested, the recently proposed Near-Infrared Reflectance of vegetation (NIRv) and Kernel-based normalized difference vegetation index (Kndvi) yielded the most accurate results. Both Monte Carlo simulations and theoretical error propagation analyses indicate a maximum deviation percentage of approximately 20% for both crops, which is considered acceptable given the expected inter-annual variation in model transferability. In addition, this paper discusses alternatives to height measurements and evaluates the feasibility of incorporating synthetic aperture radar (SAR) VIs, providing practical insights into the model’s adaptability across diverse data conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Interferometric orbit determination system for geosynchronous SAR missions: experimental proof of concept

  • Nicolás Álvarez, Jorge|||0000-0001-6143-1515
  • Carreño Megias, Xavier
  • Ferrer Torres, Estel
  • Albert Galí, Miquel
  • Rodriguez Tersa, Judith
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
Future Geosynchronous Synthetic Aperture Radar (GEOSAR) missions will provide permanent monitoring of continental areas of the planet with revisit times of less than 24 h. Several GEOSAR missions have been studied in the USA, Europe, and China with different applications, including water cycle monitoring and early warning of disasters. GEOSAR missions require unprecedented orbit determination precision in order to form focused Synthetic Aperture Radar (SAR) images from Geosynchronous Orbit (GEO). A precise orbit determination technique based on interferometry is proposed, including a proof of concept based on an experimental interferometer using three antennas separated 10–15 m. They provide continuous orbit observations of present communication satellites operating at GEO as illuminators of opportunity. The relative phases measured between the receivers are used to estimate the satellite position. The experimental results prove the interferometer is able to track GEOSAR satellites based on the transmitted signals. This communication demonstrates the consistency and feasibility of the technique in order to foster further research with longer interferometric baselines that provide observables delivering higher orbital precision., This work has been supported by the Spanish Science, Research and Innovation Plan (MICINN) with Project Codes TEC2017-85244-C2-2-P and PID2020-117303GB-C21 and by Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Patch-Like Reduction (PLR): A SAR offset tracking amplitude filter for deformation monitoring

  • Du, Sen
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Zhao, Feng
As complementary to Synthetic Aperture Radar (SAR) Differential Interferometry (DInSAR), SAR Offset Tracking (OT) is an efficient tool for large ground deformation monitoring in situations when DInSAR cannot work. However, SAR images are affected by speckle noise and some strong point-like scatters which can cause what is known as Patch Like (PL), a kind of errors that can be seen as homogeneous patches of almost constant deformation in the results. These errors are clearly visible in the results as non-consistent deformations along time, but they are difficult to detect with the traditional metrics that evaluate the cross-correlation results, like the Signal to Noise Ratio (SNR). This paper addresses this problem and proposes a simple amplitude filter to reduce PL named as Patch Like Reduction (PLR). The main idea is to find a sensor and scene independent threshold to remove the high amplitude pixels prone to cause PL. Five different SAR data sets and in-field GPS measurements are used to determine the optimal threshold and evaluate the performance of the proposed method. The results show that PL effects can be reduced with the proposed amplitude filter. The processing parameters of the improved OT processing chain are optimized as well to preserve the results resolution as much as possible., This work has been financially supported by China Scholarship Council (Grant No. 201806420035), the Spanish Ministry of Science and Innovation (MCINN) and the State Research Agency (AEI) project PID2020-117303GB-C21 MCIN/AEI/10.13039/501100011033. This work has also been financially supported by the Natural Science Foundation of China (Grant No. 42004011), China Postdoctoral Science Foundation (Grant No. 2020M671646), Centro para el Desarrollo Tecnológico Industrial and Ministry of Science and Technology of the People’s Republic of China (Spanish-Chinese CHINEKA project No. 2022YFE0102600), and the Ministry of Education of the People’s Republic of China (Construction Program of Space-Air-Ground-Well Cooperative Awareness Spatial Information Project B20046), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Assessment of the impact of long integration time in Geosynchronous SAR imagery of agricultural fields by means of GB-SAR data

  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
  • López Sánchez, Juan Manuel
  • Fabregas Canovas, Francisco Javier|||0000-0002-7654-9695
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Mas i Méndez, Mireia|||0000-0001-6679-3961
Geosynchronous synthetic aperture radar (GeoSAR) missions offer the advantage of near-continuous monitoring of specific regions on Earth, making them essential for applications that require continuous information. However, wind-induced motion along the inherent long integration time can result in image defocusing, with potential degradation of retrieved information. This article aims to investigate the impact of GeoSAR long integration time in synthetic aperture radar (SAR) imaging and derived products (time series of backscatter and coherence) required to extract agriculture-relevant soil or crop parameters of interest. The study is based on the extensive HydroSoil data acquisition campaign carried out over barley and corn crops, funded by the European Space Agency. The collected raw data are used to synthesize equivalent apertures with integration times of up to 4 h, similar to those acquired with a GeoSAR. These ultraslow apertures facilitate the assessment of the impact of agricultural scene decorrelation on the generation of images with extended integration times., This work was supported in part by the European Space Agency (ESA Contract 4000132509/20/NL/FF/ab with UPC) and in part by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu MDM-2016-0600, under Project PID2020-117303GBC21/AEI/10.13039/501100011033, and under Project PID2020-117303GBC22/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An interferometric phase optimization method joining polarimetric and temporal dimensions

  • Chen, Yaogang|||0000-0003-3800-2370
  • Hu, Jun
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Fu, Haiqiang
  • Wu, Wenqing
  • Zhang, Leixin
The polarimetric phase optimization method has been integrated into the multitemporal synthetic aperture radar interferometry (MT-InSAR) framework to enhance phase quality and deformation coverage, known as multitemporal polarimetric InSAR (MT-PolInSAR) technology. However, most existing MT-PolInSAR methods optimize phase separately in the temporal and polarimetric dimensions, failing to leverage the interdimensional relationships fully. This article proposes a novel multipolarization optimization method, which achieves one-step phase optimization by joining temporal and polarimetric dimensions based on a joint probability density function and maximum likelihood estimation (MLE). Additionally, a no-threshold regularization is employed to strengthen the stability of the multipolarization covariance matrix. The proposed approach has been validated through synthetic and real quad-polarization datasets. Regarding the real data, ALOS-2/PARSAR-2 from the Fengjie landslide in China and Radarsat-2 data from the Barcelona airport in Spain are used. The experimental outcomes demonstrate that our proposed approach significantly diminishes phase noise while increasing the density of measurement points., This work was supported in part by the National Natural Science Foundation of China under Grant 42030112, in part by the Science and Technology Innovation Program of Hunan Province under Grant 2023SK2012 and Grant 2022RC3042, in part by the Science and Technology Innovation Program of Fujian Province under Grant 2021Y3001, in part by the Major Scientific and Technological Projects of Hunan Geological Institute under Grant HNGSTP202303, in part by China Scholarship Council under Grant 202306370020, in part by Spanish Ministerio de Ciencia e Innovación (MCINN) Funds under Project PID2020-117303GBC21/AEI/10.13039/501100011033, and in part by the Innovation Foundation for Postgraduate of Central South University under Grant 1053320231689., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A dataset of 120 GHz millimeter-wave radar vital signals with synchronized reference recordings

  • Wu, Ruochen|||0000-0003-0852-424X
  • Miró Mezquita, Laura|||0009-0000-1524-2940
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
  • Garcia Garcia, Cosme
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
Millimeter-wave (mmWave) radar is widely recognized as a critical tool for contactless, continuous human sensing across multiple scenarios. Yet, there is a lack of high-quality datasets with synchronized reference measurements, especially at higher frequencies, which are essential for advancing signal processing methods and improving the retrieval of vital parameters. To address this gap, we introduce a mmWave radar vital signal dataset collected with synchronized reference recordings. The dataset is derived from measurements acquired using a custom-built, noncommercial radar system developed by CommSensLab-UPC specifically for biomedical applications. The implemented Frequency-Modulated Continuous Wave (FMCW) radar system operates at 120 GHz within the industrial, scientific, and medical (ISM) band. In parallel, a monitoring system records reference physiological signals, including electrocardiograms, respiratory traces, pulse waveforms, and blood pressure values. Under a predefined protocol, a professional clinician collected data from 24 healthy subjects under two scenarios. The release of this dataset aims to facilitate the development and validation of advanced radar signal processing algorithms, thereby enhancing the contribution of radar technologies to hemodynamic monitoring and autonomic nervous system assessment., The authors thank all participating volunteers for their contribution. This work has been supported by the Spanish Ministry of Science, Innovation and Universities MICIU/ AEI/10.13039/501100011033 and the European Regional Development Fund FEDER, UE, with projects PID2020-117303GB-C21, PID2022-138648OB-I00, and PID2024-161188OB-C21, the China Scholarship Council (CSC) under Grant 202208390068, and the Industrial Doctorates Plan of the Department of Research and Universities of the Generalitat de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Range spectral filtering in SAR interferometry: methods and limitations

  • Mestre Quereda, Alejandro
  • López Sánchez, Juan Manuel
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
A geometrical decorrelation constitutes one of the sources of noise present in Synthetic Aperture Radar (SAR) interferograms. It comes from the different incidence angles of the two images used to form the interferograms, which cause a spectral (frequency) shift between them. A geometrical decorrelation must be compensated by a specific filtering technique known as range filtering, the goal of which is to estimate this spectral displacement and retain only the common parts of the images’ spectra, reducing the noise and improving the quality of the interferograms. Multiple range filters have been proposed in the literature. The most widely used methods are an adaptive filter approach, which estimates the spectral shift directly from the data; a method based on orbital information, which assumes a constant-slope (or flat) terrain; and slope-adaptive algorithms, which consider both orbital information and auxiliary topographic data. Their advantages and limitations are analyzed in this manuscript and, additionally, a new, more refined approach is proposed. Its goal is to enhance the filtering process by automatically adapting the filter to all types of surface variations using a multi-scale strategy. A pair of RADARSAT-2 images that mapped the mountainous area around the Etna volcano (Italy) are used for the study. The results show that filtering accuracy is improved with the new method including the steepest areas and vegetation-covered regions in which the performance of the original methods is limited., This work was supported by the Spanish Ministry of Science and Innovation (State Agency of Research, AEI) and the European Funds for Regional Development (ERFD) under Projects PID2020-117303GB-C21 and PID2020-117303-C22., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Robust biometric information sensing with mmWave radar system-on-chip

  • Wu, Ruochen|||0000-0003-0852-424X
  • Miró Mezquita, Laura|||0009-0000-1524-2940
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
Vital information wireless sensing is an interesting alternative to conventional techniques based on contact sensors. The evolution of radar technologies enables the proposal of cost-effective and compact radar sensors designed for diverse health monitoring, diagnostics, and Internet of Medical Things (IoMT) applications. It is possible to observe respiratory rate (RR), heart rate (HR), cardiac rhythm, blood pressure waveform (BPW), and emerging biometrics from the phase of radar echo signals. However, recognition and separation of the signals of interest from other interfering motion is a challenge, taking into account the diversity of signal patterns depending on subjects, health and observation conditions. In this context, we propose a novel wireless vital sensing system with a self-designed 120 GHz Frequency-Modulated Continuous Wave (FMCW) Radar. The developed sensor, based on a Radar System-on-Chip (RSoC), uses a real-time Repetitive Waveform Adaptive Matched Filter (RWAMF) maximizing Signal-to-Interference-plus-Noise Ratio (SINR) for reliable cardiac rhythm and BPW observations. The radar design has been optimized for vital sensing with a very short wavelength providing excellent sensitivity to micro-motion and a centimetric range and transversal resolutions to reject clutter and unwanted motions. The superior performance of our solution has been validated and evaluated experimentally on different subjects and measurement conditions with our own acquired vital signal database., This work was supported by the Spanish MCIN funds including Excelencia Maria de Maeztu MDM-2016-0600 and projects PID2020-117303GBC21, PID2022-138648OB-I00, and PID2024-161188OB-C21 funded by MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund FEDER, UE, the China Scholarship Council (CSC) under Grant 202208390068, and the Industrial Doctorates Plan of the Department of Research and Universities of the Generalitat de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Decorrelation rate and daily cycle in sub-daily time series of SAR coherence amplitude

  • Villarroya Carpio, Arturo
  • López Sánchez, Juan Manuel
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Mas i Méndez, Mireia|||0000-0001-6679-3961
  • Fabregas Canovas, Francisco Javier|||0000-0002-7654-9695
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
  • Steele Dunne, Susan C.
A dataset of sub-daily C-band data, acquired with a ground-based synthetic aperture radar, has been used to study soil and vegetation dynamics during a complete growing season in a controlled agricultural test site. The data have been exploited to analyse the rate and sources of decorrelation in the scene, as well as the consequences of the observation conditions of a sub-daily satellite (with either low, medium or geosynchronous orbit): short revisit times, availability of multiple acquisitions during a single day, and shallow observations at some incidence angles. Repeat-pass coherence is found to be less affected by temporal decorrelation when the primary image is acquired during nighttime or the last hours predawn. Regarding the incidence angle, VV has increased sensitivity to certain phenological stages as the incidence angle increases. Additionally, a periodic oscillation on a sub-daily scale is observed when creating coherence time series with increasing temporal baseline. Factors which strongly contribute to these oscillations are the daily cycles of temperature, soil moisture and vegetation water dynamics., This work was funded by the European Space Agency (ESA Contract No. 4000132509/20/NL/FF/ab with UPC), supported by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu MDM-20160600 and Spanish MCINN AEI under projects PID2020-117303GBC21/AEI/10.13039/501100011033 and PID2020-117303GB-C22/AEI/ 10.13039/501100011033. Arturo Villarroya-Carpio enjoyed a 3-month stay at TU Delft under financial support from Banco Santander and the University of Alicante (Code: 70304B0001, Funding Line: 2023LS0048). Susan C. Steele-Dunne was supported by the Netherlands Organisation for Scientific Research (NWO) and Netherlands Space Office (NSO) under Grant NSOKNW.2019.001., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Decorrelation rate and daily cycle in sub-daily time series of SAR coherence amplitude

  • Villarroya Carpio, Arturo
  • López Sánchez, Juan Manuel
  • Aguasca Solé, Alberto
  • Mas i Méndez, Mireia
  • Fabregas Canovas, Francisco Javier
  • Broquetas Ibars, Antoni
  • Steele Dunne, Susan C.
A dataset of sub-daily C-band data, acquired with a ground-based synthetic aperture radar, has been used to study soil and vegetation dynamics during a complete growing season in a controlled agricultural test site. The data have been exploited to analyse the rate and sources of decorrelation in the scene, as well as the consequences of the observation conditions of a sub-daily satellite (with either low, medium or geosynchronous orbit): short revisit times, availability of multiple acquisitions during a single day, and shallow observations at some incidence angles. Repeat-pass coherence is found to be less affected by temporal decorrelation when the primary image is acquired during nighttime or the last hours predawn. Regarding the incidence angle, VV has increased sensitivity to certain phenological stages as the incidence angle increases. Additionally, a periodic oscillation on a sub-daily scale is observed when creating coherence time series with increasing temporal baseline. Factors which strongly contribute to these oscillations are the daily cycles of temperature, soil moisture and vegetation water dynamics., This work was funded by the European Space Agency (ESA Contract No. 4000132509/20/NL/FF/ab with UPC), supported by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu MDM-20160600 and Spanish MCINN AEI under projects PID2020-117303GBC21/AEI/10.13039/501100011033 and PID2020-117303GB-C22/AEI/ 10.13039/501100011033. Arturo Villarroya-Carpio enjoyed a 3-month stay at TU Delft under financial support from Banco Santander and the University of Alicante (Code: 70304B0001, Funding Line: 2023LS0048). Susan C. Steele-Dunne was supported by the Netherlands Organisation for Scientific Research (NWO) and Netherlands Space Office (NSO) under Grant NSOKNW.2019.001., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Assessment of the impact of long integration time in Geosynchronous SAR imagery of agricultural fields by means of GB-SAR data

  • Aguasca Solé, Alberto
  • Broquetas Ibars, Antoni
  • López Sánchez, Juan Manuel
  • Fabregas Canovas, Francisco Javier
  • Mallorquí Franquet, Jordi Joan
  • Mas i Méndez, Mireia
Geosynchronous synthetic aperture radar (GeoSAR) missions offer the advantage of near-continuous monitoring of specific regions on Earth, making them essential for applications that require continuous information. However, wind-induced motion along the inherent long integration time can result in image defocusing, with potential degradation of retrieved information. This article aims to investigate the impact of GeoSAR long integration time in synthetic aperture radar (SAR) imaging and derived products (time series of backscatter and coherence) required to extract agriculture-relevant soil or crop parameters of interest. The study is based on the extensive HydroSoil data acquisition campaign carried out over barley and corn crops, funded by the European Space Agency. The collected raw data are used to synthesize equivalent apertures with integration times of up to 4 h, similar to those acquired with a GeoSAR. These ultraslow apertures facilitate the assessment of the impact of agricultural scene decorrelation on the generation of images with extended integration times., This work was supported in part by the European Space Agency (ESA Contract 4000132509/20/NL/FF/ab with UPC) and in part by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu MDM-2016-0600, under Project PID2020-117303GBC21/AEI/10.13039/501100011033, and under Project PID2020-117303GBC22/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Facility for continuous agricultural field monitoring with a GB-PolSAR

  • Mas i Méndez, Mireia
  • Aguasca Solé, Alberto
  • Broquetas Ibars, Antoni
  • Fabregas Canovas, Francisco Javier
  • Mallorquí Franquet, Jordi Joan
  • Llop Casamada, Jordi
  • López Sánchez, Juan Manuel
  • Kubanek, Julia
Current climate and weather changes urged the scientific community to find ways to observe and understand the relatively rapid land-atmosphere processes related to the water cycle. The HydroSoil project, funded by the European Space Agency, was proposed to experimentally assess the use of Synthetic Aperture Radar in future short revisit time missions based on Geosynchronous Orbital platforms. This article describes the HydroSoil facility providing continuous monitoring of an agricultural field with a 10-min temporal resolution and a spatial resolution in the order of 1 m2. Gathered data from the full Pol Ground-Based SAR are being used to investigate the capability of Geosynchronous SAR missions to retrieve soil moisture and to measure vegetation parameters. To achieve the project's objectives, intensive procurement of ground truth data encompassing continuous acquisition of relevant meteorological parameters such as air humidity, temperature, precipitation wind speed and direction, pressure, and solar irradiation together with other vegetation characteristics under study has been mandatory. The different densities, sizes, and water content of two different crops, barley and corn, together with the data generated, will enable the assessment of the missions’ ability to extract essential scene characteristics, such as soil moisture and crop water content, for use in future geostationary missions., This work was supported in part by the European Space Agency (ESA Contract 4000132509/20/NL/FF/ab with UPC), and in part by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu under Grant MDM2016-0600, Project PID2020-117303GB-C21/AEI/10.13039/501100011033, and Project PID2020-117303GB-C22/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

ACE-OT: Polarimetric SAR data based amplitude contrast enhancement algorithm for offset tracking applications

  • Du, Sen
  • Mallorquí Franquet, Jordi Joan
  • Zhao, Feng
The use of polarimetric synthetic aperture radar (SAR) data can improve the performance of persistent scatterer interferometry (PSI). However, its huge potential remains locked for the amplitude information-based offset tracking (OT) technology. For example, to the best knowledge of the authors, there is no single example of a polarization-based image optimization method that has been developed for OT processing. In this article, an amplitude contrast enhancement (ACE) algorithm is introduced, which demonstrates the potential of the polarimetric SAR data on the improvement of OT performance. Its core idea is finding the optimal combination of the different scattering mechanisms for each pixel to improve the contrast. First, the orientation of the reflected polarization ellipse is removed, to avoid the influence of the geometric relationship between the antenna and the target, and the properties of the target. Then three similarity parameters are defined to represent the three basic reflection types of the single bounce, the double bounce, and the random reflection. After that, the optimizing equation is constructed with two optimizing vectors. Finally, the optimizing vectors are calculated to obtain the enhanced amplitude image. Three examples of the enhancement are presented with different PolSAR images sets of both full- (Radarsat-2) and dual-polarization (TerraSAR-X and Sentinel-1). The performance of ACE-OT has been compared with another method, the adaptive histogram enhancement (AHE). The impact of the number of polarization channels available on ACE-OT performance has also been studied., This work was supported in part by the China Scholarship Council under Grant 201806420035, in part by the Spanish Ministry of Science and Innovation (MCIN), in part by the State Research Agency (AEI) Project under Grant PID2020-117303GB-C21 and Grant MCIN/AEI/10.13039/501100011033, in part by the National Natural Science Foundation of China under Grant 42004011, in part by the China Postdoctoral Science Foundation under Grant 2020M671646, and in part by the Construction Program of Space-Air-Ground-Well Cooperative Awareness Spatial Information Project under Grant B20046., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Advancing coal fire detection model for large-scale areas based on RS indices and machine learning

  • Liu, Jinglong
  • Zhao, Feng
  • Wang, Yunjia
  • Du, Sen
  • Wang, Yanan
  • Dang, Libo
  • Mallorquí Franquet, Jordi Joan
Coal fires present significant global environmental and energy challenges, posing substantial barriers to achieving carbon-neutral goals. Thermal Infrared Remote Sensing (TIRS) technology, which is used to retrieve land surface temperatures, plays a crucial role in detecting coal fires. However, its accuracy suffers from solar radiation interference. In addition, there is limited research focused specifically on detecting coal fires over large areas. In this paper, thermal anomaly indices (TAIs), derived from short-wave infrared and near-infrared data, were selected for coal fire detection due to their relatively low sensitivity to solar radiation. Using these TAIs alongside other remote sensing (RS) indices, a coal fire detection model (CFDM) was developed and trained using the AutoGluon machine learning (ML) framework. The model is capable of identifying large-scale coal fire target areas without relying on deformation associated with coal fires. CFDM outperformed other ML algorithms, achieving Recall, Precision, F1-score, and Kappa coefficient values of 0.89, 0.94, 0.93, and 0.92, respectively. Shapley Additive Explanations (SHAP) were used to evaluate the importance of different features, validating the model’s reliability and interoperability. The model’s robustness has been further demonstrated using observed coal fire points over Xinjiang, China, and Jharkhand, India. A T-test confirms that the proposed CFDM is significantly superior to TAIs-based methods, offering better differentiation of coal fires from other thermal anomalies and reducing commission errors., This work was supported by the National Natural Science Foundation of China (Grant No. 52474184, 42474018, U22A20598), Spanish Ministry of Science and Innovation (State Agency of Research, AEI) and the European Funds for Regional Development (ERFD) under Project PID 2020-117303GB-C21, Grant PRE2021-097981. China Postdoctoral Science Foundation (Grant No. 2023T160685, 2020M671646), Young Elite Scientists Sponsorship Program by CAST (Grant No. 2023QNRC001 -YESS20230599), National Key R&D Program of China (Grant No. 2022YFE0102600) and the Construction Program of Space-Air-Ground-Well Cooperative Awareness Spatial Information Project (B20046) also support this work. The authors are grateful to the European Space Agency (ESA), Google Earth Engine (GEE), the National Aeronautics and Space Administration (NASA) for the provision of RS data, products, and online computations., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An anchor-free feature-enhanced network for arbitrary oriented ship detection in high resolution SAR images

  • Qiu, Yu
  • Zou, Bin
  • Zhang, Lamei
  • Mallorquí Franquet, Jordi Joan
Ship detection in synthetic aperture radar (SAR) images plays a crucial role in maritime transportation. However, SAR ship detection faces challenges, such as diverse ship scales, complex background environments, severe noise interference, and the difficulty of distinguishing densely docked ships, all of which hinder the precision of ship target detection. To address these issues, an anchor-free feature-enhanced network for arbitrary-oriented ship detection (AFFE-AOSD) is proposed, which significantly enhances the detection performance for multiscale ship targets and densely docked ship formations, while also improving angle estimation accuracy. First, we designed an efficient feature integration module to enrich gradient flows, tailored specifically for the ship target detection task. This improves the detection of small targets. In addition, to enable more precise angle estimation, a two-stage angle prediction module with two stage circular smooth label is introduced. Furthermore, an angle-aware dynamic sample assignment method and an associated loss function that consider angles have been devised to improve the network’s accuracy in rotation predictions. Experiments on SSDD+ and RSDD datasets demonstrate significant improvements: AFFE-AOSD outperforms the baseline on SSDD+, improving precision by 3%, F1 score by 5.1%, and AP50 by 4.7%, and achieves the best angle prediction accuracy on RSDD with a mean error of 4.47° and a median error of 2°.Moreover, the proposed method consistently achieves real-time inference speeds exceeding 55 frame per second across different scenes, confirming its effectiveness in balancing accuracy and efficiency for practical maritime applications., This work was supported in part by the National Natural Science Foundation of China under Grant 62271172, in part by China Scholarship Council (CSC) under Grant 202306120088, and in part by the Spanish MCINN and AEI under Project PID2020-117303GB-C21/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Patch-Like Reduction (PLR): A SAR offset tracking amplitude filter for deformation monitoring

  • Du, Sen
  • Mallorquí Franquet, Jordi Joan
  • Zhao, Feng
As complementary to Synthetic Aperture Radar (SAR) Differential Interferometry (DInSAR), SAR Offset Tracking (OT) is an efficient tool for large ground deformation monitoring in situations when DInSAR cannot work. However, SAR images are affected by speckle noise and some strong point-like scatters which can cause what is known as Patch Like (PL), a kind of errors that can be seen as homogeneous patches of almost constant deformation in the results. These errors are clearly visible in the results as non-consistent deformations along time, but they are difficult to detect with the traditional metrics that evaluate the cross-correlation results, like the Signal to Noise Ratio (SNR). This paper addresses this problem and proposes a simple amplitude filter to reduce PL named as Patch Like Reduction (PLR). The main idea is to find a sensor and scene independent threshold to remove the high amplitude pixels prone to cause PL. Five different SAR data sets and in-field GPS measurements are used to determine the optimal threshold and evaluate the performance of the proposed method. The results show that PL effects can be reduced with the proposed amplitude filter. The processing parameters of the improved OT processing chain are optimized as well to preserve the results resolution as much as possible., This work has been financially supported by China Scholarship Council (Grant No. 201806420035), the Spanish Ministry of Science and Innovation (MCINN) and the State Research Agency (AEI) project PID2020-117303GB-C21 MCIN/AEI/10.13039/501100011033. This work has also been financially supported by the Natural Science Foundation of China (Grant No. 42004011), China Postdoctoral Science Foundation (Grant No. 2020M671646), Centro para el Desarrollo Tecnológico Industrial and Ministry of Science and Technology of the People’s Republic of China (Spanish-Chinese CHINEKA project No. 2022YFE0102600), and the Ministry of Education of the People’s Republic of China (Construction Program of Space-Air-Ground-Well Cooperative Awareness Spatial Information Project B20046), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Monitoring corn crop height and growth rate with interferometric coherence

  • Mas i Méndez, Mireia
  • Broquetas Ibars, Antoni
  • Fabregas Canovas, Francisco Javier
  • Aguasca Solé, Alberto
  • Llop Casamada, Jordi
  • Liu, Jinglong
  • Mallorquí Franquet, Jordi Joan
  • Villarroya Carpio, Arturo
  • López Sánchez, Juan Manuel
Future radar Earth observation missions, with reduced revisit times, will offer the capability to obtain valuable data applicable to agriculture and meteorology. They will contribute to a better understanding of some observed changes that exhibit time scales much shorter than present satellite revisit times. In the context of the preparatory studies in support of future radar mission proposals with reduced revisit time, such as the geosynchronous HydroTerra, the HydroSoil facility has been set up for C-band radar continuous monitoring of crops with a time resolution of 10 min and a spatial resolution of 1 m2. The data obtained for a corn crop observed along the life cycle has been analyzed to model radar backscattering dependence on crop development parameters. In this study, it is particularly noticeable that the interferometric coherence was measured over a 24-h interval, in contrast to previous studies. Coherence has shown a strong sensitivity to plant height and the phenological stage of the crop, which can be exploited to sense crop growth with radar measurements. However, due to the high density and size of the developed corn canopy, the relationship between coherence and crop height is limited to the first corn stages. For this reason, a new parameter named daily growth rate has been defined and found to be well correlated with the radar coherence., This work was supported in part by the European Space Agency (ESA Contract 4000132509/20/NL/FF/ab with UPC), in part by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu MDM-2016-0600 and under Project PID2020-117303GB-C21/AEI/10.13039/501100011033 and Project PID2020-117303GB-C22/AEI/10.13039/501100011033, in part by the Catalan Government under Grant 2022 FI AGAUR (BDNS 585689), and in part by the Spanish Ministry of Science and Innovation under Grant 2021 FI (PRE2021-098957)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Multistatic SAR imaging and precise orbit determination synergies using geostationary telecommunication satellites

  • Carreño Megias, Xavier
  • Nicolás Álvarez, Jorge
  • Aguasca Solé, Alberto
  • Broquetas Ibars, Antoni
Low Earth Orbit (LEO) remote sensing missions present a main limitation regarding their revisit time of several days or weeks. They cannot provide continuous monitoring over the same area of the planet. The on-going studies on Geosynchronous Synthetic Aperture Radar (GEOSAR), which have a revisit time of less than 24 h, aim to mitigate this limitation [1]. Since high altitude GEO missions are beyond MEO navigation satellites coverage, a ground based interferometric system (GEODE) has been developed for GEO Precise Orbit Determination, a requirement to form focused GEOSAR synthetic apertures [2]. Since no operational GEOSAR missions are available yet, present Geostationary telecommunications satellites can be used as transmitters of opportunity for GEODE experimental testing and validation. Recent results show the convenience of using ground reflectors to extend interferometric baselines lengths up to kilometers to achieve the required GEOSAR orbit precision. Locating stable reflectors of opportunity for interferometric orbit determination in urban areas is possible by complementing the ground interferometer with a multistatic SAR imaging processor capable to map the surrounding scattering centers. In this paper we present a new multifunction observation system capable of both GEO orbit determination and multistatic SAR imaging using Geostationary Telecommunication satellites. Bistatic SAR imaging based on GEO satellites was already demonstrated by POLIMI research group in [3], in our case, improved SAR images are obtained thanks to the system capability to precisely determine the satellites orbits. The paper presents and discuss the interesting synergies resulting from the integration in the same instrument of multistatic SAR imaging and interferometric orbit determination., This work has been supported by the Spanish Science, Research and Innovation Plan (MICINN) with Project Codes TEC2017-85244-C2-2-P and PID2020- 117303GB-C21 and by Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigacion, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Contactless acquisition and decoupling of respiratory and cardiac signals using a 122 GHz FMCW radar

  • Miró Mezquita, Laura
  • Wu, Ruochen
  • Aguasca Solé, Alberto
  • Broquetas Ibars, Antoni
  • Garcia Garcia, Cosme
  • Estrada Cuxart, Oriol
  • Nájar Martón, Montserrat
This paper presents a contactless method for the simultaneous monitoring of heart rate (HR) and respiratory rate (RR) using a Frequency Modulated Continuous Wave (FMCW) radar operating at 122.5 GHz. To address the challenges posed by spectral overlap and interference between cardiac and respiratory components, we introduce a signal separation and estimation framework based on Maximum Likelihood Estimation (MLE) combined with an orthogonal projection technique. The approach models the thoracic displacement captured by the radar as the superposition of periodic sources and applies spectral projection to isolate the fundamental frequencies and their harmonics. Theoretical performance is assessed through the derivation of the Cramér-Rao Lower Bound (CRLB) and extensive Monte Carlo simulations under varying SNR and sample size conditions. Experimental validation was conducted on 23 healthy volunteers, each providing two 20 second recordings, using a clinical-grade reference monitor. The method achieves high estimation accuracy, with a mean absolute error of 0.69 bpm for HR and 0.33 bpm for RR. The algorithm is capable of reconstructing the cardiac pulse waveform while preserving key morphological features such as the systolic peak and dicrotic notch. Furthermore, the use of the projection technique further enhanced estimation accuracy under nonphysiological conditions, including both elevated and reduced rates. These findings demonstrate the potential of the proposed method as a reliable tool for contactless monitoring of vital signs and support its future integration into biomedical applications., This work was supported by the Industrial Doctorates Plan of the Department of Research and Universities of the Generalitat de Catalunya, and is part of the I+D+i project 6-SENSES (PID2022-138648OB-I00) funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU. It is also supported by the Spanish MCIN project PID2020-117303GB-C21, funded by AEI/10.13039/501100011033, and by the China Scholarship Council (CSC) under Grant 202208390068., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Robust biometric information sensing with mmWave radar system-on-chip

  • Wu, Ruochen
  • Miró Mezquita, Laura
  • Aguasca Solé, Alberto
  • Nájar Martón, Montserrat
  • Broquetas Ibars, Antoni
Vital information wireless sensing is an interesting alternative to conventional techniques based on contact sensors. The evolution of radar technologies enables the proposal of cost-effective and compact radar sensors designed for diverse health monitoring, diagnostics, and Internet of Medical Things (IoMT) applications. It is possible to observe respiratory rate (RR), heart rate (HR), cardiac rhythm, blood pressure waveform (BPW), and emerging biometrics from the phase of radar echo signals. However, recognition and separation of the signals of interest from other interfering motion is a challenge, taking into account the diversity of signal patterns depending on subjects, health and observation conditions. In this context, we propose a novel wireless vital sensing system with a self-designed 120 GHz Frequency-Modulated Continuous Wave (FMCW) Radar. The developed sensor, based on a Radar System-on-Chip (RSoC), uses a real-time Repetitive Waveform Adaptive Matched Filter (RWAMF) maximizing Signal-to-Interference-plus-Noise Ratio (SINR) for reliable cardiac rhythm and BPW observations. The radar design has been optimized for vital sensing with a very short wavelength providing excellent sensitivity to micro-motion and a centimetric range and transversal resolutions to reject clutter and unwanted motions. The superior performance of our solution has been validated and evaluated experimentally on different subjects and measurement conditions with our own acquired vital signal database., This work was supported by the Spanish MCIN funds including Excelencia Maria de Maeztu MDM-2016-0600 and projects PID2020-117303GBC21, PID2022-138648OB-I00, and PID2024-161188OB-C21 funded by MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund FEDER, UE, the China Scholarship Council (CSC) under Grant 202208390068, and the Industrial Doctorates Plan of the Department of Research and Universities of the Generalitat de Catalunya., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Interferometric orbit determination system for geosynchronous SAR missions: experimental proof of concept

  • Nicolás Álvarez, Jorge
  • Carreño Megias, Xavier
  • Ferrer Torres, Estel
  • Albert Galí, Miquel
  • Rodriguez Tersa, Judith
  • Aguasca Solé, Alberto
  • Broquetas Ibars, Antoni
Future Geosynchronous Synthetic Aperture Radar (GEOSAR) missions will provide permanent monitoring of continental areas of the planet with revisit times of less than 24 h. Several GEOSAR missions have been studied in the USA, Europe, and China with different applications, including water cycle monitoring and early warning of disasters. GEOSAR missions require unprecedented orbit determination precision in order to form focused Synthetic Aperture Radar (SAR) images from Geosynchronous Orbit (GEO). A precise orbit determination technique based on interferometry is proposed, including a proof of concept based on an experimental interferometer using three antennas separated 10–15 m. They provide continuous orbit observations of present communication satellites operating at GEO as illuminators of opportunity. The relative phases measured between the receivers are used to estimate the satellite position. The experimental results prove the interferometer is able to track GEOSAR satellites based on the transmitted signals. This communication demonstrates the consistency and feasibility of the technique in order to foster further research with longer interferometric baselines that provide observables delivering higher orbital precision., This work has been supported by the Spanish Science, Research and Innovation Plan (MICINN) with Project Codes TEC2017-85244-C2-2-P and PID2020-117303GB-C21 and by Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Sequential polarimetric phase optimization algorithm for dynamic deformation monitoring of landslides

  • Wang, Yian
  • Luo, Jiayin
  • Dong, Jie
  • Mallorquí Franquet, Jordi Joan
  • Liao, Mingsheng
  • Zhang, Lu
  • Gong, Jianya
In the era of big SAR data, it is urgent to develop dynamic time series DInSAR processing procedures for near-real-time monitoring of landslides. However, the dense vegetation coverage in mountainous areas causes severe decorrelations, which demands high precision and efficiency of phase optimization processing. The common phase optimization using single-polarization SAR data cannot produce satisfactory results due to the limited statistical samples in some natural scenarios. The novel polarimetric phase optimization algorithms, however, have low computational efficiency, limiting their applications in large-scale scenarios and long data sequences. In addition, temporal changes in the scattering properties of ground features and the continuous increase of SAR data require dynamic phase optimization processing. To achieve efficient phase optimization for dynamic DInSAR time series analysis, we combine the Sequential Estimator (SE) with the Total Power (TP) polarization stacking method and solve it using eigen decomposition-based Maximum Likelihood Estimator (EMI), named SETP-EMI. The simulation and real data experiments demonstrate the significant improvements of the SETP-EMI method in precision and efficiency compared to the EMI and TP-EMI methods. The SETP-EMI exhibits an increase of more than 50% and 20% in highly coherent points for the real data compared to the EMI and TP-EMI, respectively. It, meanwhile, achieves approximately six and two times more efficient than the EMI and TP-EMI methods in the real data case. These results highlight the effectiveness of the SETP-EMI method in promptly capturing and analyzing evolving landslide deformations, providing valuable insights for real-time monitoring and decision-making., This work was supported by the National Natural Science Foundation of China (grant number 42374013), the Spanish Ministry of Science and Innovation (State Agency of Research, AEI) and the European Funds for Regional Development (ERFD) under Project PID2020-117303GB-C21/AEI/10.13039/501100011033. Thanks for the financial support from the program of the China Scholarships Council (No.202206270025). In addition, we also thank the European Space Agency (ESA) for providing the Sentinel-1 data under the framework of the Sino-EU Dragon Project (id 59332) and Andrew Hooper for sharing the StaMPS programs. Thanks to Yalong River Hydropower Development Co., Ltd for providing the landslide field survey results and water level data., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An interferometric phase optimization method joining polarimetric and temporal dimensions

  • Chen, Yaogang
  • Hu, Jun
  • Mallorquí Franquet, Jordi Joan
  • Fu, Haiqiang
  • Wu, Wenqing
  • Zhang, Leixin
The polarimetric phase optimization method has been integrated into the multitemporal synthetic aperture radar interferometry (MT-InSAR) framework to enhance phase quality and deformation coverage, known as multitemporal polarimetric InSAR (MT-PolInSAR) technology. However, most existing MT-PolInSAR methods optimize phase separately in the temporal and polarimetric dimensions, failing to leverage the interdimensional relationships fully. This article proposes a novel multipolarization optimization method, which achieves one-step phase optimization by joining temporal and polarimetric dimensions based on a joint probability density function and maximum likelihood estimation (MLE). Additionally, a no-threshold regularization is employed to strengthen the stability of the multipolarization covariance matrix. The proposed approach has been validated through synthetic and real quad-polarization datasets. Regarding the real data, ALOS-2/PARSAR-2 from the Fengjie landslide in China and Radarsat-2 data from the Barcelona airport in Spain are used. The experimental outcomes demonstrate that our proposed approach significantly diminishes phase noise while increasing the density of measurement points., This work was supported in part by the National Natural Science Foundation of China under Grant 42030112, in part by the Science and Technology Innovation Program of Hunan Province under Grant 2023SK2012 and Grant 2022RC3042, in part by the Science and Technology Innovation Program of Fujian Province under Grant 2021Y3001, in part by the Major Scientific and Technological Projects of Hunan Geological Institute under Grant HNGSTP202303, in part by China Scholarship Council under Grant 202306370020, in part by Spanish Ministerio de Ciencia e Innovación (MCINN) Funds under Project PID2020-117303GBC21/AEI/10.13039/501100011033, and in part by the Innovation Foundation for Postgraduate of Central South University under Grant 1053320231689., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Improved photosynthetic accumulation models for biomass estimation of Soybean and Cotton using vegetation indices and canopy height

  • Liu, Jinglong
  • Mallorquí Franquet, Jordi Joan
  • Aguasca Solé, Alberto
  • Fabregas Canovas, Francisco Javier
  • Broquetas Ibars, Antoni
  • Llop Casamada, Jordi
  • Mas i Méndez, Mireia
  • Zhao, Feng
  • Wang, Yanan
Most crops accumulate above-ground biomass (AGB) through photosynthesis, inspiring the development of the Photosynthetic Accumulation Model (PAM) and Simplified PAM (SPAM). Both models estimate AGB based on time-series optical vegetation indices (VIs) and canopy height. To further enhance the model performance and evaluate its applicability across different crop types, an improved PAM model (IPAM) is proposed with three strategies. They are as follows: (i) using numerical integration to reduce reliance on dense observations, (¿¿ ) introduction of Fibonacci sequence-based structural correction to improve model accuracy, and (¿¿¿ ) non-photosynthetic area masking to reduce overestimation. Results from both soybean and cotton demonstrate the strong performance of the PAM-series models. Among them, the proposed IPAM model achieved higher accuracy, with mean ¿2 and RMSE values of 0.89 and 207 g/m2 for soybean and 0.84 and 251 g/m2 for cotton, respectively. Among the vegetation indices tested, the recently proposed Near-Infrared Reflectance of vegetation (NIRv) and Kernel-based normalized difference vegetation index (Kndvi) yielded the most accurate results. Both Monte Carlo simulations and theoretical error propagation analyses indicate a maximum deviation percentage of approximately 20% for both crops, which is considered acceptable given the expected inter-annual variation in model transferability. In addition, this paper discusses alternatives to height measurements and evaluates the feasibility of incorporating synthetic aperture radar (SAR) VIs, providing practical insights into the model’s adaptability across diverse data conditions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Range spectral filtering in SAR interferometry: methods and limitations

  • Mestre Quereda, Alejandro
  • López Sánchez, Juan Manuel
  • Mallorquí Franquet, Jordi Joan
A geometrical decorrelation constitutes one of the sources of noise present in Synthetic Aperture Radar (SAR) interferograms. It comes from the different incidence angles of the two images used to form the interferograms, which cause a spectral (frequency) shift between them. A geometrical decorrelation must be compensated by a specific filtering technique known as range filtering, the goal of which is to estimate this spectral displacement and retain only the common parts of the images’ spectra, reducing the noise and improving the quality of the interferograms. Multiple range filters have been proposed in the literature. The most widely used methods are an adaptive filter approach, which estimates the spectral shift directly from the data; a method based on orbital information, which assumes a constant-slope (or flat) terrain; and slope-adaptive algorithms, which consider both orbital information and auxiliary topographic data. Their advantages and limitations are analyzed in this manuscript and, additionally, a new, more refined approach is proposed. Its goal is to enhance the filtering process by automatically adapting the filter to all types of surface variations using a multi-scale strategy. A pair of RADARSAT-2 images that mapped the mountainous area around the Etna volcano (Italy) are used for the study. The results show that filtering accuracy is improved with the new method including the steepest areas and vegetation-covered regions in which the performance of the original methods is limited., This work was supported by the Spanish Ministry of Science and Innovation (State Agency of Research, AEI) and the European Funds for Regional Development (ERFD) under Projects PID2020-117303GB-C21 and PID2020-117303-C22., Peer Reviewed, Postprint (published version)