Skip to main content

OPTIMIZACION DE LA CURVA DE POTENCIA DE AEROGENERADORES MEDIANTE CONTROL ACTIVO DE FLUJO (ESSENCE)

PID2023-150014OB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2023
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Influence of turbulence length scale and platform surge motion on wake dynamics in tandem floating wind turbines

  • Nabhani, Ahmad|||0009-0008-9828-1264
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
Wake interaction is a key factor limiting the performance of floating offshore wind turbine arrays, yet the combined influence of inflow turbulence structure and platform motion on wake dynamics remains poorly understood. This study examines how the integral length scale of inflow turbulence and platform surge motion shapes wake development and power performance in a tandem configuration of two aligned floating offshore wind turbines separated by five rotor diameters. High-fidelity computational fluid dynamics simulations are performed using OpenFOAM, based on Large-Eddy Simulation with an Actuator-Line Model and the WallAdapting Local Eddy-Viscosity (WALE) subgrid-scale closure. Synthetic turbulent inflows are generated using the Divergence-Free Synthetic Eddy Method, with prescribed integral length scales spanning 0.25–1.25 times the rotor radius. Over this range, increasing the integral length scale naturally leads to higher freestream turbulence intensity, which increases from approximately 1.9% to 7.2% at the first turbine location. The corresponding dominant inflow frequencies are extracted from time-resolved velocity signals, yielding Strouhal numbers in the range St ˜ 0.71 to 0.12. Larger turbulence scales introduce energetic, low-frequency structures that directly interact with the wake, promote earlier destabilization of tip vortices, enhance entrainment, and accelerate wake mixing. As a result, the inter-turbine velocity deficit is significantly reduced, leading to substantial increases in the downstream turbine power up to 140% relative to uniform inflow conditions. Platform surge motion further enhances wake unsteadiness and mixing, contributing to additional power recovery; however, its effect remains secondary compared to the influence of turbulence scales. The relative phase between turbines shows only a minor impact on the mean wake behavior., The project received financial support from the Spanish Ministry of Science, Innovation, and Universities through the Project No. PID2023-150014OB-C21. Access to high-performance computing facilities was provided by the Spanish Supercomputing Network (Red Española de Supercomputación, RES) under Allocation Nos. IM-2024-3-0003 and IM-2025-1-0004. The first author is funded by the 2025-DI-00014 Industrial Ph.D. grant, awarded by the Generalitat de Catalunya with the support of the Y- Plasma Enterprise.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

DBD plasma actuators for aerodynamic flow control: a review

  • Saemian, Mohammad
  • Cota, Miguel
  • Sabidussi, Lena
  • Rida, Zeinab
  • Nabhani, Ahmad|||0009-0008-9828-1264
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
Dielectric barrier discharge (DBD) plasma actuators (PAs) are devices used to control airflow. DBD actuators generate an electric field that accelerates ionized air particles, inducing localized flow modifications. Among other applications, they are particularly effective for enhancing cooling, for aerodynamic drag reduction, and for lift enhancement, therefore capable of improving stall characteristics. In addition, they offer several distinct advantages, such as rapid response time, low power consumption, and no moving parts. The present review paper aims to summarize the main governing equations associated with the most common phenomenological PA Computational Fluid Dynamics (CFD) models, Shyy and Suzen-Huang, as well as highlight the major applications to flat plates, wind turbine airfoils and entire wind turbines. The application of DBD plasma actuators on individual wind turbine blades, as well as dynamic horizontal and vertical axis wind turbines, is reviewed, drawing from key numerical and experimental investigations. The simulated performance of various configurations of single and multiple PAs on representative airfoils at different chordwise locations is discussed. The overall findings indicate that the chordwise location of the actuators on airfoils and their optimum spanwise placement on small and large wind turbine blades, along with the geometry and excitation parameters of the actuators, play a crucial role in their performance, affecting the boundary layer and the flow pattern. The reader shall obtain an overall idea of the most recent aerodynamic applications of PAs as well as their expected efficiency, This research was supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades with the project PID2023-150014OB-C21.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Grid technologies in lattice Boltzmann method: a comprehensive review

  • AN, Bo
  • Chen, KD
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
A review of the development of grid technologies and corresponding numerical approaches based on the lattice Boltzmann method (LBM) is performed in the present study. The history of the algorithmic development and practical applications is presented and followed by a short introduction of the basic theory of LBM, especially the classic lattice Bhatnagar–Gross–Krook LBGK D2Q9 model. In reality, all the different grid technologies reported aim to solve one but very important problem, the local grid refinement, which largely influences the stability, efficiency, accuracy, and flexibility of the conventional LBM. The improvement of these numerical properties after employing various grid technologies is analyzed. Several grid technologies, such as body-fitted grid, multigrid, non-uniform rectangular grid, quadtree Cartesian square grid, unstructured grid and meshless discrete points, as well as the corresponding numerical approaches are compared and discussed, This research was founded by the project provided by the Northwestern Polytechnical University (G2024 KY0613). The present research is also supported by the project (20230013053008) provided by Aeronautical Science Foundation of China and by the Spanish Ministerio de Ciencia, Innovacion y Universidades with the project PID2023-150014OB-C21
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High-fidelity LES modeling of wake interaction and rotor performance in NTNU BT1 horizontal axis wind turbines

  • Nabhani, Ahmad|||0009-0008-9828-1264
  • Tousi, Navid M.
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
A high-fidelity Large Eddy Simulation using the Wall-Adapting Local Eddy-viscosity model was undertaken to investigate the aerodynamic performance and wake characteristics of the NTNU BT1 Horizontal Axis Wind Turbine. The Actuator Line Method was employed to simulate rotor behavior over a wide range of tip-speed ratios (¿ = 2–10). The study covers both single and tandem turbine configurations under four inflow conditions with turbulent intensities of 0%, 2.5%, 5.0%, and 10%, respectively. The simulations generated a highly resolved database, with over 91.72% of turbulent kinetic energy directly resolved and less than 9% modeled by sub-grid-scale treatment. Results reveal that the tip-speed ratio of the upstream turbine significantly influences the performance of the downstream unit, emphasizing its importance in wind farm layout design. High turbulence intensities lead to faster wake mixing and velocity deficit recovery, considerably enhancing downstream turbine performance. This improvement is, however, accompanied by increased unsteady loads, potentially raising concerns related to structural fatigue and durability, This work received funding from the Spanish Ministry of Science, Innovation and Universities via the project PID2023-150014OB-C21. Computational resources were provided by the Spanish Supercomputing Network (Red Española de Supercomputación, RES) under the grants IM-2025-1-0004 and IM-2024-3-0003. The first author is funded by the 2025-DI-00014 Industrial PhD grant, awarded by the Generalitat de Catalunya with the support of the YPlasma Actuator Technologies Inc.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Large-scale horizontal axis wind turbine aerodynamic efficiency optimization using active flow control and synthetic jets

  • Nabhani, Ahmad|||0009-0008-9828-1264
  • Tousi, Navid M.
  • Coma Company, Martí|||0000-0002-6469-9338
  • Bugeda Castelltort, Gabriel|||0000-0002-9320-8729
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
Efficiency increase is seen as one of the main goals of any energy-converting device. In this direction, the present study aims to demonstrate that large-scale wind turbines can still be improved in order to generate larger amounts of energy. The research presented in this manuscript consists of two main blocks. Initially, it analyzes via Computational Fluid Dynamics (CFD) the boundary layer dynamics on a set of pre-determined airfoils cut along the DTU-10MW reference blade by using the 2D URANS SST turbulence model. The aim of this initial stage is to identify the boundary layer separation point, its associated frequency, and peak-to-peak amplitude for each airfoil cut along the blade, evaluating as well their respective aerodynamic characteristics. The second main goal of the present research consists of implementing the Active Flow Control (AFC) technology and, when employing synthetic jets, to reattach the boundary layer in all airfoils where it is separated. To accomplish this second goal efficiently, the five parameters associated with the AFC implementation performed on each airfoil will be obtained through respective genetic algorithm optimizations. An energy assessment is finally undertaken at each airfoil to validate the respective energy gain obtained. When comparing the net power gain, before and after AFC implementation, generated by each of the airfoils evaluated, net power gains between 23 and 36 kW are obtained in all airfoils analyzed, clarifying that the proposed technology is capable of improving the performance of the wind turbines, very likely at any operating condition., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Evaluation of machine learning models for predicting wind energy output under various climatic conditions.

  • Athota, Rathan Babu|||0000-0002-8709-776X
  • Saini, Kishu
  • Rojas Gregorio, José Ignacio|||0000-0002-7025-4378
The urgency of finding sustainable solutions to global concerns like climate change, resource depletion, and environmental degradation has never been higher. AI technologies, including machine learning, neural networks, and predictive analytics, are being used to address difficult sustainability concerns, such as optimizing energy use in smart cities and improving agricultural yield in response to climatic unpredictability. Evaluation of machine learning models for predicting turbine energy output under various wind conditions.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Simulations of thermally-driven winds: combined effect of slope and sea-breezes

  • Villardi de Montlaur, Adeline de|||0000-0002-0243-668X
  • Arias Calderón, Santiago|||0000-0001-9233-0178
  • Rojas Gregorio, José Ignacio|||0000-0002-7025-4378
  • Jiménez Cortés, Maria Antonia
Thermally-driven winds, such as slope winds and land- and sea-breezes, typically exhibit lower intensity than synoptic wind regimes. However, they offer the significant advantage of being highly periodic, making them particularly appealing for wind energy production, an increasingly urgent need in the current context of decarbonisation of energy systems. In this study, we aim to simulate the generation and behaviour of thermally-driven winds in the Llobregat river delta, located in the northeast of the Iberian Peninsula. This coastal region is influenced by both sea breezes and slope winds due to the proximity of the Garraf mountains. Our objective is to analyse the combined effect of these wind systems on local wind dynamics. To that end, we use a simple 2D computational domain, where temperature and terrain roughness data are used as inputs of the model, and a realistic slope angle is applied to replicate the topography. Temperature measurements at various heights were collected over two years using a meteorological mast located in the study area. From this dataset, several days characterized by prominent thermally-driven winds were selected to set up and validate the simulations. The numerical simulations, which are based on the incompressible Navier-Stokes equations under the Boussinesq approximation, were conducted using the open-source computational fluid dynamics software OpenFOAM. Results include vertical profiles of temperature and wind velocity at specific times of the day, as well as their temporal evolution throughout the day. These results are then compared with wind speed measurements obtained from anemometers mounted on the meteorological mast, providing insights into the accuracy of the model and the combined influence of sea breezes and slope winds in this region., 7.1 - Per a 2030, garantir l’accés universal a serveis d’energia assequibles, confiables i moderns, 7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el conjunt de fonts d’energia, 7 - Energia Assequible i No Contaminant
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Optimization of synthetic jet parameters for active flow control on a 10 MW horizontal axis wind turbine

  • Nabhani, Ahmad|||0009-0008-9828-1264
  • Saemian, Mohammad
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
This study uses 2D CFD simulations with a URANS approach and the k-¿ SST turbulence model to op- timize the aerodynamic performance of a 10 MW horizontal axis wind turbine (HAWT). 24 two-dimensional airfoil sections were analyzed along the blade at a wind speed of 10 m/s. Focusing on the z/R = 0.35 section where the boundary layer separated at x/C=0.41, synthetic jet active flow control (AFC) was applied to miti- gate boundary layer separation and improve efficiency. Two optimization approaches, parametric optimization and genetic algorithm (GA), were used to optimize five AFC parameters such as momentum coefficient (Cµ ), fet frequency(F + ), jet injection angle (¿j ), jet location(xj /C) and jet width(wj ). The parametric optimization was performed by conducting 27 2D-CFD simulations and resulted in a 64.59% increase in lift coefficient. In the GA optimization, the five AFC parameters were optimized and took about 400 2D-CFD simulations to complete the study, yielding a 68.94% increase in lift coefficient. The AFC-GAs optimization considerably reduced the downstream wake, a power gain of 23 kW was obtain on this particular airfoil section and con- sidering a span of 1m. These findings demonstrate the potential of synthetic jets to enhance aerodynamic performance at very high Reynolds numbers ReO1.4 × 107 ., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Active flow control actuators on wind turbines, comprehensive review

  • Saemian, Mohammad
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
Active flow control (AFC) techniques are designed to add or subtract momentum into/from the flow field in order to modify (usually delay) the boundary layer separation. AFC strategies are being considered in many industrial applications, particularly in aeronautics/aerodynamics, where the early separation of the boundary layer drastically affects the forces acting on an airfoil. AFC devices are divided into three different types, including fluidic actuators, plasma ones, and moving surfaces. The present paper is a comprehensive review of the different AFC actuators employed in wind turbines, including Dielectric Barrier Discharge (DBD) plasma actuator (PA), synthetic jet actuator (SJA), and suction and blowing actuators. All AFC applications on Horizontal axis wind turbines (HAWT) and Vertical ones (VAWT), whether reporting numerical or experimental methods, are considered. The actuation when employing moving surfaces shall be presented in a different review. AFC implementation on wind turbines needs to employ a strategy consisting of setting/optimizing the AFC parameters, as well as considering an energy assessment. This review is highlighting the research that has already addressed these points. Eventually, a comparison of the main achievements gathered from previous publications is presented and discussed in detail to assist researchers and engineers and give them a tool to design future AFC applications on WTs., This research was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades with the project PID2023-150014OB-C21., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Comparative CFD analysis of DTU-10 MW wind turbine at varying wind velocities

  • Saemian, Mohammad
  • Nabhani, Ahmad|||0009-0008-9828-1264
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
This study investigates the aerodynamic performance of a DTU-10MW wind turbine blade airfoil sections at two wind speeds of 5 and 10 m/s. Several blade sections along the span are analyzed to evaluate the effects of varying wind speeds on key parameters, including lift and drag coefficient, pressure distribution, and dynamic boundary layer time evolution, among others. Each section is studied at the corresponding Reynolds numbers and angle of attack using numerical models based on the Navier-Stokes equations. The comparative analysis demonstrates that by increasing the wind speed, boundary layer remains separated a longer distance along the span of the blade., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Flow inside a square cavity driven by the symmetric sliding of its four sides

  • Mellibovsky Elstein, Fernando|||0000-0003-0497-9052
  • An, Bo|||0000-0001-8738-2504
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
  • Meseguer Serrano, Álvaro|||0000-0002-2022-2001
We investigate the incompressible flow inside a two-dimensional square cavity, driven by the sliding motion of its four lids, all at the same speed and with facing lids moving in opposite directions. The problem has three symmetries: two mirror symmetries with respect to the diagonals and a ¿ rotation invariance about the centre of the cavity. The base flow, a steady state that has all three symmetries, is the unique solution at sufficiently low values of the Reynolds number (¿¿) and acts as a global attractor. At higher ¿¿, it has become unstable and shares the phase space with a globally attracting space–time symmetric periodic orbit that, in addition to the rotational invariance, is also invariant under evolution over half a period followed by reflection about either of the diagonals. In between, a wealth of solution branches and intervening bifurcations mediate the transition process. In particular, a pair of steady states that break the mirror symmetries but are mirror-symmetry images of each other regulate the appearance and disappearance of a second space–time symmetric periodic orbit and a pair of asymmetric periodic orbits that are also mirror images of each other. The catalogue of instabilities includes both local (two pitchfork, two Hopf, a saddle-node and a cyclic fold) and global (two heteroclinic and one homoclinic) bifurcations. The sequence of transitions is explained in terms of a one-dimensional path through the parameter space of a codimension-four bifurcation: the double zero bifurcation with Z2 symmetry and degeneracy of the third order terms., This research was supported by the Ministerio de Ciencia, Innovación y Universidades (Agencia Estatal de Investigación, project nos. PID2020-114043 GB-I00 (MCIN/AEI/10.13039/501100011033), PID2023-150029NB-I00 (MCIN/AEI/10.13039 /501100011033/FEDER, UE) and PID2023-150014OB-C21. Funding by the G2024 KY0613 project of Northwestern Polytechnical University and the 20230013053008 project by the Aeronautical Science Foundation of China are also aknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

The effect of dimensional modifications on fluidic oscillators

  • Karimzadegan, Kavoos
  • Baghaei, Masoud
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
This study investigates how the internal dimensional modifications of a novel fluidic oscillator affect the outlet mass flow frequency. For each of the four set of the dimensional modifications performed, the forces acting on the main jet as it enters the mixing chamber were evaluated, and it was concluded that the self sustained oscillations were pressure driven. One of the most striking novel observations was to find out an inverse relation between the outlet mass flow frequency and the reverse feedback channel mass flow
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Impact of tip-speed ratio on small HAWTs wake dynamics interaction under uniform and turbulent conditions

  • Nabhani, Ahmad|||0009-0008-9828-1264
  • Bergadà Granyó, Josep Maria|||0000-0003-1787-7960
High-fidelity Large-Eddy Simulations (LES) using the Wall-Adapting Local Eddy-viscosity (WALE) model are performed to study the aerodynamic performance and wake behavior of horizontal-axis wind turbines. The rotor aero- dynamics are represented using the Actuator Line Method (ALM). Simulations are carried out over a wide range of tip-speed ratios (¿ = 2–10) for both single- turbine and tandem-turbine configurations. The influence of inflow conditions is investigated under uniform and turbulent inflows with turbulence intensities (TI) of 2.5%, 5.0%, and 10%. The results show that the tip-speed ratio of the upstream turbine strongly affects wake strength and downstream turbine per- formance. Operation at the rated tip-speed ratio produces the largest velocity deficit and the strongest wake interference, leading to severe power losses for the downstream turbine. In contrast, higher inflow turbulence intensities pro- mote earlier wake breakdown and faster velocity recovery, allowing a significant improvement in downstream performance, reaching up to five times the power obtained under uniform inflow. This study highlights the combined importance of both turbine operating conditions and inflow turbulence in wind-farm layout design and optimization, The project received financial support from the Spanish Ministry of Science, Innovation, and Universities through the project PID2023-150014OB-C21. Access to high-performance computing facilities was provided by the Spanish Supercomputing Network (Red Española de Supercomputación, RES) under allocation IM-2024-3-0003. The first author is funded by the 2025-DI00014 Industrial PhD grant, awarded by the Generalitat de Catalunya with the support of the Y-Plasma Enterprise
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Evaluation of machine learning models for predicting wind energy output under various climatic conditions.

  • Athota, Rathan Babu
  • Saini, Kishu
  • Rojas Gregorio, José Ignacio
The urgency of finding sustainable solutions to global concerns like climate change, resource depletion, and environmental degradation has never been higher. AI technologies, including machine learning, neural networks, and predictive analytics, are being used to address difficult sustainability concerns, such as optimizing energy use in smart cities and improving agricultural yield in response to climatic unpredictability. Evaluation of machine learning models for predicting turbine energy output under various wind conditions., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Novel fluidic oscillator evaluation considering dimensional modifications

  • Karimzadegan, Kavoos
  • Bergadà Granyó, Josep Maria
Although flow mixing and cooling can be greatly enhanced when considering the use of fluidic oscillators (FOs), they are more commonly employed in active flow control (AFC) applications where the injected pulsating flow interacts with the boundary layer, usually in order to delay its separation. In fact, prior to any FO implementation in a given application, it is essential to study the range of frequencies and amplitudes it can generate as a function of the incoming mass flow and its dimensions. This is what is being performed in the present manuscript for a rather novel FO configuration. A numerical study of a standard three-dimensional (3D) FO configuration, and also using a two-dimensional (2D) approach, is initially presented. After comparing the 3D and the 2D results and analyzing the main differences, we modified some of the internal dimensions of the FO in order to evaluate the variation in its dynamic performance. The present results clarify which internal dimensional modifications are more effective in generating larger output frequencies and velocity field variations. Care is taken to analyze the origin of self-sustained oscillations. This paper links, for the first time, the origin of the pressure force oscillations at the feedback channel’s outlet, with the interaction of the mixing chamber central jet and the reverse feedback channel flow at the mixing chamber’s converging walls. A novel equation relating the FO outlet mass flow frequency with the time-averaged FC reverse flow is presented and discussed. In fact, the present study needs to be seen as the continuation of a former one, recently published by authors, where the effects of several Reynolds numbers as well as some different internal dimensions were considered, This research was supported by the Universitat Politècnica de Catalunya under the grant OBLEA-2024, and by the Spanish Ministerio de Ciencia, Innovacion y Universidades with the project PID2023-150014OB-C21. We also want to acknowledge the Red Española de Supercomputación (RES), Spanish supercomputer network for the project IM-2024-2-0008, which helped in generating this paper, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Large-scale horizontal axis wind turbine aerodynamic efficiency optimization using active flow control and synthetic jets

  • Nabhani, Ahmad
  • Tousi, Navid M.
  • Coma Company, Martí
  • Bugeda Castelltort, Gabriel
  • Bergadà Granyó, Josep Maria
Efficiency increase is seen as one of the main goals of any energy-converting device. In this direction, the present study aims to demonstrate that large-scale wind turbines can still be improved in order to generate larger amounts of energy. The research presented in this manuscript consists of two main blocks. Initially, it analyzes via Computational Fluid Dynamics (CFD) the boundary layer dynamics on a set of pre-determined airfoils cut along the DTU-10MW reference blade by using the 2D URANS SST turbulence model. The aim of this initial stage is to identify the boundary layer separation point, its associated frequency, and peak-to-peak amplitude for each airfoil cut along the blade, evaluating as well their respective aerodynamic characteristics. The second main goal of the present research consists of implementing the Active Flow Control (AFC) technology and, when employing synthetic jets, to reattach the boundary layer in all airfoils where it is separated. To accomplish this second goal efficiently, the five parameters associated with the AFC implementation performed on each airfoil will be obtained through respective genetic algorithm optimizations. An energy assessment is finally undertaken at each airfoil to validate the respective energy gain obtained. When comparing the net power gain, before and after AFC implementation, generated by each of the airfoils evaluated, net power gains between 23 and 36 kW are obtained in all airfoils analyzed, clarifying that the proposed technology is capable of improving the performance of the wind turbines, very likely at any operating condition., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Flow inside a square cavity driven by the symmetric sliding of its four sides

  • Mellibovsky Elstein, Fernando
  • An, Bo
  • Bergadà Granyó, Josep Maria
  • Meseguer Serrano, Álvaro
We investigate the incompressible flow inside a two-dimensional square cavity, driven by the sliding motion of its four lids, all at the same speed and with facing lids moving in opposite directions. The problem has three symmetries: two mirror symmetries with respect to the diagonals and a ¿ rotation invariance about the centre of the cavity. The base flow, a steady state that has all three symmetries, is the unique solution at sufficiently low values of the Reynolds number (¿¿) and acts as a global attractor. At higher ¿¿, it has become unstable and shares the phase space with a globally attracting space–time symmetric periodic orbit that, in addition to the rotational invariance, is also invariant under evolution over half a period followed by reflection about either of the diagonals. In between, a wealth of solution branches and intervening bifurcations mediate the transition process. In particular, a pair of steady states that break the mirror symmetries but are mirror-symmetry images of each other regulate the appearance and disappearance of a second space–time symmetric periodic orbit and a pair of asymmetric periodic orbits that are also mirror images of each other. The catalogue of instabilities includes both local (two pitchfork, two Hopf, a saddle-node and a cyclic fold) and global (two heteroclinic and one homoclinic) bifurcations. The sequence of transitions is explained in terms of a one-dimensional path through the parameter space of a codimension-four bifurcation: the double zero bifurcation with Z2 symmetry and degeneracy of the third order terms., This research was supported by the Ministerio de Ciencia, Innovación y Universidades (Agencia Estatal de Investigación, project nos. PID2020-114043 GB-I00 (MCIN/AEI/10.13039/501100011033), PID2023-150029NB-I00 (MCIN/AEI/10.13039 /501100011033/FEDER, UE) and PID2023-150014OB-C21. Funding by the G2024 KY0613 project of Northwestern Polytechnical University and the 20230013053008 project by the Aeronautical Science Foundation of China are also aknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High-fidelity LES modeling of wake interaction and rotor performance in NTNU BT1 horizontal axis wind turbines

  • Nabhani, Ahmad
  • Tousi, Navid M.
  • Bergadà Granyó, Josep Maria
A high-fidelity Large Eddy Simulation using the Wall-Adapting Local Eddy-viscosity model was undertaken to investigate the aerodynamic performance and wake characteristics of the NTNU BT1 Horizontal Axis Wind Turbine. The Actuator Line Method was employed to simulate rotor behavior over a wide range of tip-speed ratios (¿ = 2–10). The study covers both single and tandem turbine configurations under four inflow conditions with turbulent intensities of 0%, 2.5%, 5.0%, and 10%, respectively. The simulations generated a highly resolved database, with over 91.72% of turbulent kinetic energy directly resolved and less than 9% modeled by sub-grid-scale treatment. Results reveal that the tip-speed ratio of the upstream turbine significantly influences the performance of the downstream unit, emphasizing its importance in wind farm layout design. High turbulence intensities lead to faster wake mixing and velocity deficit recovery, considerably enhancing downstream turbine performance. This improvement is, however, accompanied by increased unsteady loads, potentially raising concerns related to structural fatigue and durability, This work received funding from the Spanish Ministry of Science, Innovation and Universities via the project PID2023-150014OB-C21. Computational resources were provided by the Spanish Supercomputing Network (Red Española de Supercomputación, RES) under the grants IM-2025-1-0004 and IM-2024-3-0003. The first author is funded by the 2025-DI-00014 Industrial PhD grant, awarded by the Generalitat de Catalunya with the support of the YPlasma Actuator Technologies Inc., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

DBD plasma actuators for aerodynamic flow control: a review

  • Saemian, Mohammad
  • Cota, Miguel
  • Sabidussi, Lena
  • Rida, Zeinab
  • Nabhani, Ahmad
  • Bergadà Granyó, Josep Maria
Dielectric barrier discharge (DBD) plasma actuators (PAs) are devices used to control airflow. DBD actuators generate an electric field that accelerates ionized air particles, inducing localized flow modifications. Among other applications, they are particularly effective for enhancing cooling, for aerodynamic drag reduction, and for lift enhancement, therefore capable of improving stall characteristics. In addition, they offer several distinct advantages, such as rapid response time, low power consumption, and no moving parts. The present review paper aims to summarize the main governing equations associated with the most common phenomenological PA Computational Fluid Dynamics (CFD) models, Shyy and Suzen-Huang, as well as highlight the major applications to flat plates, wind turbine airfoils and entire wind turbines. The application of DBD plasma actuators on individual wind turbine blades, as well as dynamic horizontal and vertical axis wind turbines, is reviewed, drawing from key numerical and experimental investigations. The simulated performance of various configurations of single and multiple PAs on representative airfoils at different chordwise locations is discussed. The overall findings indicate that the chordwise location of the actuators on airfoils and their optimum spanwise placement on small and large wind turbine blades, along with the geometry and excitation parameters of the actuators, play a crucial role in their performance, affecting the boundary layer and the flow pattern. The reader shall obtain an overall idea of the most recent aerodynamic applications of PAs as well as their expected efficiency, This research was supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades with the project PID2023-150014OB-C21., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Grid technologies in lattice Boltzmann method: a comprehensive review

  • AN, Bo
  • Chen, KD
  • Bergadà Granyó, Josep Maria
A review of the development of grid technologies and corresponding numerical approaches based on the lattice Boltzmann method (LBM) is performed in the present study. The history of the algorithmic development and practical applications is presented and followed by a short introduction of the basic theory of LBM, especially the classic lattice Bhatnagar–Gross–Krook LBGK D2Q9 model. In reality, all the different grid technologies reported aim to solve one but very important problem, the local grid refinement, which largely influences the stability, efficiency, accuracy, and flexibility of the conventional LBM. The improvement of these numerical properties after employing various grid technologies is analyzed. Several grid technologies, such as body-fitted grid, multigrid, non-uniform rectangular grid, quadtree Cartesian square grid, unstructured grid and meshless discrete points, as well as the corresponding numerical approaches are compared and discussed, This research was founded by the project provided by the Northwestern Polytechnical University (G2024 KY0613). The present research is also supported by the project (20230013053008) provided by Aeronautical Science Foundation of China and by the Spanish Ministerio de Ciencia, Innovacion y Universidades with the project PID2023-150014OB-C21, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Simulations of thermally-driven winds: combined effect of slope and sea-breezes

  • Villardi de Montlaur, Adeline de
  • Arias Calderón, Santiago
  • Rojas Gregorio, José Ignacio
  • Jiménez Cortés, Maria Antonia
Thermally-driven winds, such as slope winds and land- and sea-breezes, typically exhibit lower intensity than synoptic wind regimes. However, they offer the significant advantage of being highly periodic, making them particularly appealing for wind energy production, an increasingly urgent need in the current context of decarbonisation of energy systems. In this study, we aim to simulate the generation and behaviour of thermally-driven winds in the Llobregat river delta, located in the northeast of the Iberian Peninsula. This coastal region is influenced by both sea breezes and slope winds due to the proximity of the Garraf mountains. Our objective is to analyse the combined effect of these wind systems on local wind dynamics. To that end, we use a simple 2D computational domain, where temperature and terrain roughness data are used as inputs of the model, and a realistic slope angle is applied to replicate the topography. Temperature measurements at various heights were collected over two years using a meteorological mast located in the study area. From this dataset, several days characterized by prominent thermally-driven winds were selected to set up and validate the simulations. The numerical simulations, which are based on the incompressible Navier-Stokes equations under the Boussinesq approximation, were conducted using the open-source computational fluid dynamics software OpenFOAM. Results include vertical profiles of temperature and wind velocity at specific times of the day, as well as their temporal evolution throughout the day. These results are then compared with wind speed measurements obtained from anemometers mounted on the meteorological mast, providing insights into the accuracy of the model and the combined influence of sea breezes and slope winds in this region., 7.1 - Per a 2030, garantir l’accés universal a serveis d’energia assequibles, confiables i moderns, 7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el conjunt de fonts d’energia, 7 - Energia Assequible i No Contaminant, Postprint (published version)