Skip to main content

CARACTERIZACION DEL CICLO DEL AGUA Y METODOS DE ESTIMACION PARA DATOS GEOSAR

PID2024-161188OB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para la Investigación y el Desarrollo Experimental
Subprogram Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2024
State Plan 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Spectrum-Block-Based Regularization for 3-D Deformation Reconstruction: Applications to Joint NISAR and Sentinel-1 Observations

  • Si, Jinzhao
  • Lopez-Sanchez, Juan M.
  • Lu, Zhong
  • Zhang, Shuangcheng
  • Niu, Yufen
  • Zhao, Jinqi
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Multitrack interferometric synthetic aperture radar (InSAR) methods hold significant potential for 3-D deformation monitoring. However, both right-looking-only and joint right–left-looking combinations remain susceptible to noise amplification, particularly in the weakly constrained North–South (N–S) component. While regularization is an effective tool to suppress noise, traditional empirically tuned or single-parameter schemes often struggle to balance bias and variance across all three components simultaneously. This study proposes a spectrum-block-based regularization parameter-selection method. The proposed method analyzes the spectrum of the 3-D normal equations to identify the dominant noise-amplification mode for a given combination of observations. It then applies spectrum-block-based regularization with separate strengths for the strong subspace and the weak component, stabilizing the weak component while limiting bias in the others. Mogi simulations show that, compared with least squares (LSs) and the single-parameter L-curve method, the proposed method substantially reduces componentwise RMSE under ill-conditioned observation combinations. Furthermore, for the November 2025 volcanic deformation event in the Erta Ale–Hayli Gubbi area, the joint NISAR/Sentinel-1 right–left-looking decomposition keeps the E–W and U components consistent with LS while effectively suppressing high-frequency noise in the N–S component. These results highlight that the proposed method improves the robustness of 3-D deformation reconstruction under ill-conditioned geometries and weak-constraint scenarios.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A Dynamical Framework that Integrates Optical and SAR Imagery for Sugarcane Monitoring in the Cauca Valle

  • Mestre-Quereda, Alejandro
  • Martínez Marín, Tomás
  • Lopez-Sanchez, Juan M.
  • Mosquera, Carlos
  • Pelgrum, Henk
  • Skarli, Antonia
  • Hoekman, Dirk
  • van der Sande, Corné
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Martínez Marín, Tomás|||/items/13bcbfa7-02e3-4dbc-87a0-4efc7486838b
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
In this work, we present a novel dynamical framework for crop monitoring that integrates SAR and optical satellite imagery. The proposed methodology employs two-dimensional state transitions to explicitly model the expected temporal evolution of crops. By combining such crop modeling with multi-sensor observations, including dual-polarimetric (VV and VH) radar images gathered by Sentinel-1 and optical imagery from Sentinel-2, the developed framework produces robust and consistent estimations using the well-established Kalman Filter. Specifically, the approach is applied to retrieve the biomass values of sugarcane crops located in the Cauca Valley (Colombia), over a full growing season (from summer 2024 to summer 2025). An intensive field campaign was carried out, so that ground-truth measurements in a large number of points, located in multiple fields, were available to develop and validate the proposed integration algorithm. Results show that biomass is accurately estimated especially when all available observations, both SAR and optical, are employed. In this case, a global root mean square error of 0.103 kg, a mean absolute error of 0.064 kg and an accumulated biomass difference of 13.8 kg·day are obtained after evaluating the model multiple times on randomly-selected points. The analysis also highlights a key limitation of optical imagery in the study area, as a large number of images are affected by cloud cover, resulting in long gaps within the time series and reduced estimation accuracy. Furthermore, the best performance of the proposed integrated model is achieved when all available SAR products, including dual-polarization (VV and VH) coherence and intensity products, are exploited, although very good results are also obtained using single-polarization coherence and intensity data (either at VV or VH polarizations). Comparison with alternative approaches, including partially integrated methods using only one type of information (either SAR or NDVI), and methods based solely on machine learning, indicates that the proposed methodology consistently offers superior accuracy in biomass estimation
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Satellite-Based Differential Radar Interferometry in Landslide Research: An Overview of Applications and Challenges

  • Tomás, Roberto
  • Navarro-Hernández, María I.
  • Lopez-Sanchez, Juan M.
  • Reyes-Carmona, Cristina
  • Liu, Xiaojie
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
  • Navarro-Hernández, María I.|||/items/5f436097-bc19-404c-be1d-b217b1ee54de
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Reyes-Carmona, Cristina|||/items/bc6490c7-7db8-42f4-ab58-cf9140dc7d05
The use of satellite Differential Synthetic Aperture Radar Interferometry (DInSAR) has transformed the analysis of landslide dynamics by enabling detailed spatiotemporal monitoring of slow and subtle ground deformations. DInSAR enables comprehensive geomorphological characterization and identification of triggering factors. Retrospective applications of DInSAR provide valuable insights into past events and support causal analysis linked to rainfall episodes or piezometric fluctuations. Moreover, integration with numerical modeling enhances predictive capabilities and facilitates the calibration of geotechnical parameters. DInSAR is also instrumental in assessing infrastructure impacts and in the generation of susceptibility, hazard, vulnerability, and risk maps, which are key for land-use planning and risk management. Nevertheless, this technique has inherent limitations that must be carefully considered when interpreting results. Future developments, driven by the integration of artificial intelligence and enhanced computing capacities, are transforming the landscape of InSAR applications in landslide studies. These advancements, combined with upcoming satellite missions, are expected to significantly improve measurement accuracy, temporal resolution, and overall operational potential, paving the way for more robust quasi-early warning systems for landslide prevention. In this work, an overview of the current applications, future trends, and challenges of DInSAR in landslide studies is presented, with particular emphasis on the practical dimension of landslide studies and on the exploitation of DInSAR outcomes to support risk management and mitigation strategies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Large-Scale Forest Height Estimation With TanDEM-X InSAR and Sparse LiDAR Based on LSC and Block Adjustment Model

  • Hu, Huacan
  • Xie, Yanzhou
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Gómez, Cristina
The TanDEM-X bistatic Interferometric Synthetic Aperture Radar (InSAR) system has great potential for forest height estimation. However, single-polarization InSAR data cannot support a uniquely determined inversion of classical physical models due to insufficient observational information. Simplified models make inversion possible using only interferometric coherence amplitude, at the cost of reduced performance by uncertain semi-empirical parameters and a loss of adaptivity to variations in local forest properties. To address this issue, this letter proposes a framework based on a semi-empirical physical model, block adjustment model, and the least-squares collocation (LSC) method. The framework utilizes sparse spaceborne LiDAR canopy height as a reference and selects tie points in overlapping areas to establish constraints, enabling robust estimation of semi-empirical model parameters on a large scale. Subsequently, variance-covariance estimation is employed to develop an LSC-based local calibration method, mitigating residual inversion errors caused by variations in forest attributes and terrain slope within local areas. Validation at two test sites in the USA and Spain shows that, compared to the results obtained from the SINC model and semi-empirical model inversions, the proposed framework improves accuracy by more than 32% and 21%, respectively, highlighting its potential for large-scale forest height mapping with TanDEM-X InSAR and sparse LiDAR data.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Enhanced Sub-Canopy Topography Retrieval Method Using Dual-Baseline TanDEM-X InSAR Data

  • Liu, Zhiwei
  • Zhu, Jianjun
  • Lopez-Sanchez, Juan M.
  • Gómez, Cristina
  • Fu, Haiqiang
  • Wang, Huiqiang
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Accurately measuring topography in forested areas using single-baseline InSAR data is challenging due to volume scattering effects and a limited number of observations. To address these limitations, we propose a new dual-baseline InSAR framework for retrieving sub-canopy topography utilizing two bistatic TanDEM-X InSAR observations. Our approach adopts the Random Volume over Ground (RVoG) model to estimate two spatially varying terms: ground-to-volume amplitude ratio and forest canopy height. Using these parameters we then estimate the phase center height (PCH), representing the elevation difference between the conventional InSAR-based digital elevation model (DEM, a numerical representation of terrain elevations) and the true ground surface. By subtracting the estimated PCH from the conventional InSAR DEM provided by each baseline, our method produces two individual sub-canopy topography products. Further refinement is achieved through a fusion process that integrates the sub-canopy topography maps derived from different baselines, enhancing the accuracy of the output. To validate the proposed framework, we conducted experiments in Sweden and Spain, across diverse forest types, climates, and terrain conditions. The accuracy of the estimated sub-canopy topography was assessed against airborne lidar data. At the Krycklan site in Sweden, our method achieved a root-mean-square error (RMSE) of 2.04 m, demonstrating a performance improvement of 60% and 70% over conventional InSAR, depending on the baselines used. In Spain, the Vegaquemada and Covaleda sites yielded RMSEs of 3.44 m and 4.70 m, respectively, surpassing conventional InSAR DEMs for forested regions as well as simple single-baseline approaches which leverage space-borne LiDAR to fit model parameters, though with some influence from terrain slope. This approach has the potential to support largescale sub-canopy topography with InSAR data.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Scattering-feature-driven change matrix for crop growth monitoring based on the co-polar complex coherence

  • Luo, Jiayin
  • Lopez-Sanchez, Juan M.
  • Hajnsek, Irena
  • Bao, Nisha
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
In SAR imagery, the backscattered power from scenes covering agricultural areas contains information from both soil and vegetation. External factors such as precipitation and irrigation modify soil and vegetation moisture and consequently change the backscattered power, making it difficult to isolate changes related to crop growth from them. To address this issue, the co-polar complex coherence was recently proposed as an effective tool for crop growth monitoring. In this study, a new method for extracting scattering features from the co-polar complex coherence is proposed, which is based on the distances on the complex plane with respect to the coherences associated with elementary targets. In addition, to further enhance the sensitivity to the changes in scattering features between acquisition dates, associated with phenological development, here we define a new change matrix based on these scattering features. This matrix is constructed to characterize the magnitude, direction, and type of change between any two given dates. Airborne quad-pol SAR data gathered during the AGRISAR 2006 and CROPEX 2014 campaigns were used to assess the proposed monitoring approach for three representative crop types: corn, barley, and canola. Besides a physical and a visual interpretation of the change matrix, a phenological clustering was carried out based on it. A comparison with other advanced methods used for decomposition and for generating the change matrix indicates that the proposed approach provides results less affected by fluctuations due to environmental conditions and more consistent across data sets, improving phenological clustering as a final application.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A SAR and optical remote sensing dataset in Seville for scientific research in agriculture

  • Villarroya-Carpio, Arturo
  • Cazcarra-Bes, Víctor
  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Cazcarra-Bes, Víctor|||/items/56b3939a-8f7b-4dfa-bd9f-c7420df154b7
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Radar remote sensing data is underused for agricultural applications due to the complexity of its pre-processing and to the non-obvious physical interpretation of the derived features. To address these challenges, this work presents the SAR and Optical Dataset for Agriculture in Seville (SODAS), which integrates time series of radar images (Sentinel-1), optical images (Sentinel-2), precipitation records, and crop-type maps. The georeferenced images cover an agricultural area in Seville, Spain, from 2017 to 2021. The SAR images are provided in the form of dual-polarimetric covariance matrices, which include the backscattering coefficient and the correlation between channels, and repeat-pass interferometric products (coherence and phase) at VV and VH polarimetric channels. The optical images correspond to reflectivity at red, green, blue, and near infra-red bands, as well as NDVI products. This dataset has many potential uses, such as development of algorithms for crop-type mapping, retrieval of biophysical parameters, crop monitoring, and data fusion. Additionally, a Jupyter notebook to load the dataset, create and compare time series, and visualise images is included.