Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Amine-impregnated Alumina Solid Sorbents for CO2 Capture. Lessons Learned

  • Lara, Y.
  • Romeo, L.M.
The application of Amine-impregnated Alumina Solid Sorbent Carbon Capture is a suitable option to increase CO2 capture efficiency and to reduce by several percentage points the efficiency penalty of CCS in power plants. These sorbents require less regeneration energy due to the reduction in water content and the higher heat capacity of solids. The objective is to demonstrate that the use of amine-impregnated alumina solid sorbents is a suitable option to increase CO2 capture efficiency and to reduce several percentage points the efficiency penalty caused by the capture system in the power plant. The proposed innovative sorbent consists in amines supported on high surface area and high porosity solid materials, such as alumina and silica-alumina. Good results have been achieved. Important high porosity support makes possible to obtain high CO2 capture capacities over 50 mg CO2/g of sorbent. As a consequence, the combination of this CCS option with a coal power plant may reduce the efficiency penalty down to 7 efficiency points. This figure could make feasible the impregnated amine solid sorbent as a future and promising option for CO2 capture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Energy Integration of High and Low Temperature Solid Sorbents for CO2 Capture

  • Lara, Y.
  • Martínez, A.
  • Lisbona, P.
  • Romeo, L.M.
It is crucial to reduce the energy penalties related to CO2 capture processes if CCS is to be implemented at industrial scale. In this context, gas-solid sorption has become a relevant technology. The absence of large amounts of water when using dry solid sorbents and their high heat capacity reduce the energy requirements in the gas-solid sorption CO2 capture process. Depending on the sorbent composition, the gas-solid sorption process carries out at high or low temperatures. High temperature sorbents allow the utilization of waste energy while energy requirements in low temperature processes will be less demanding. This study is focused on the assessment and comparison of the final energy penalty of low-temperature (amine impregnated alumina-based solid particles) and high-temperature solid sorbents capture process (calcium oxide).