Skip to main content

RECUPERACION DE ENERGIAS RESIDUALES EN VEHICULOS LIGEROS. IMPACTO TECNOLOGICO.

RTI2018-095923-B-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Good and bad get together: Inactivation of SARS-CoV-2 in particulate matter pollution from different fuels

  • de la Fuente, José
  • Armas, Octavio
  • Barroso Arévalo, Sandra
  • Gortázar, Christian
  • García-Seco Romero, María Teresa
  • Buendía Andrés, Aránzazu
  • Villanueva, Florentina
  • Soriano, José A.
  • Mazuecos, Lorena
  • Vaz Rodrigues, Rita
  • García Contreras, Reyes
  • García, Antonio
  • Monsalve Serrano, Javier
  • Domínguez Rodríguez, Lucas José
  • Sánchez-Vizcaíno Rodríguez, José Manuel
Air pollution and associated particulate matter (PM) affect environmental and human health worldwide. The intense vehicle usage and the high population density in urban areas are the main causes of this public health impact. Epidemiological studies have provided evidence on the effect of air pollution on airborne SARS-CoV-2 transmission and COVID-19 disease prevalence and symptomatology. However, the causal relationship between air pollution and COVID-19 is still under investigation. Based on these results, the question addressed in this study was how long SARS-CoV-2 survives on the surface of PM from different origin to evaluate the relationship between fuel and atmospheric pollution and virus transmission risk. The persistence and viability of SARS-CoV-2 virus was characterized in 5 engine exhaust PM and 4 samples of atmospheric PM10. The results showed that SARS-CoV-2 remains on the surface of PM10 from air pollutants but interaction with engine exhaust PM inactivates the virus. Consequently, atmospheric PM10 levels may increase SARS-CoV-2 transmission risk thus supporting a causal relationship between these factors. Furthermore, the relationship of pollution PM and particularly engine exhaust PM with virus transmission risk and COVID-19 is also affected by the impact of these pollutants on host oxidative stress and immunity. Therefore, although fuel PM inactivates SARS-CoV-2, the conclusion of the study is that both atmospheric and engine exhaust PM negatively impact human health with implications for COVID-19 and other diseases
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulation of Optimal Driving for Minimization of Fuel Consumption or NOx Emissions in a Diesel Vehicle

  • Fernández-Yáñez, Pablo
  • Soriano, José A.
  • Mata, Carmen
  • Armas, Octavio
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bermúdez, Vicente|||0000-0002-2781-5598
[EN] Significant reduction in fuel consumption and NOx emissions can be achieved just by changing the driving along the road. In this paper, dynamic programming is employed to find two different driving profiles optimized for fuel consumption and NOx creation minimization in a diesel vehicle. Results, show that the fuel reduction driving cycle leads to fuel savings of 4% compared with the average consumption with arbitrary driving. The NOx reduction driving profile improves the emissions of arbitrary driving by a 34.5%. NOx oriented driving profile improves the emissions of the fuel-oriented cycle by a 38% at the expense of a fuel consumption penalty of 10%. This result points out the difficulty of a simultaneous NOx and fuel consumption reduction, stressing the efforts to be done in this field during the following years. Strategies followed and conclusions drawn from this paper are relevant concerning vehicle autonomy integration., This research was funded by the Spanish Ministry of Science and Innovation, grant number RTI2018-095923-B-C21.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nozzle rate of injection estimation from hole to hole momentum flux data with different fossil and renewable fuels

  • Payri, Raul|||0000-0001-7428-5510
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Soriano, J. A.
  • Fernández-Yáñez, P.
  • Armas, O.
[EN] Due to environmental problems, research on fuel economy and pollutant emissions in internal combustion engines has drawn the attention of automobile manufacturers and researchers. The diesel engine is one of the most efficient alternatives and one of the main areas of the study in these engines is spray mixing, recognized as a critical factor in combustion control and the reduction of its related contaminants. The studies about fuel sprays rely on experimental data of the rate of injection, which can only be obtained with high-cost equipment. The aim of this paper is to validate for different fuels a method for the determination of the rate of injection based on spray momentum measurements and the total injected mass. After a proper tuning of the test momentum flux device, the injection rate results were validated using the Bosch tube method. The technique was validated for four different fuels, diesel, biodiesel, GTL (Gas-to-liquid) and Farnesane, in order to identify the consequences of the fuel properties on the injection performance characteristics and the estimation method. The results of rate of injection following the procedures presented showed good accuracy when compared to experimental values. These methods can be employed to estimate this parameter when experimental facilities for this purpose are not available., Authors wish to thank the financial support provided by: i) the Spanish Ministry of Science, Innovation and Universities to the project RECUPERA, Ref. Ref.: RTI2018-095923-B-C21 and ii) the government of Castilla-La Mancha community to the project ASUAV, Ref. SBPLY/19/180501/000116. Authors also want to thank: i) the companies REPSOL, SASOL and AMYRIS by the fuels supply, ii) the technical support provided by Nissan Europe Technology Centre Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Good and bad get together: Inactivation of SARS-CoV-2 in particulate matter pollution from different fuels

  • de la Fuente, José
  • Armas, Octavio
  • Barroso-Arévalo, Sandra
  • Gortázar, Christian
  • García-Seco, Teresa
  • Buendía-Andrés, Aránzazu
  • Villanueva, Florentina
  • Soriano, José A.
  • Mazuecos, Lorena
  • Vaz-Rodrigues, Rita
  • García-Contreras, Reyes
  • Domínguez, Lucas
  • Sánchez-Vizcaíno, José Manuel
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
[EN] Air pollution and associated particulate matter (PM) affect environmental and human health worldwide. The intense vehicle usage and the high population density in urban areas are the main causes of this public health impact. Epidemiological studies have provided evidence on the effect of air pollution on airborne SARS-CoV-2 transmission and COVID-19 disease prevalence and symptomatology. However, the causal relationship between air pollution and COVID-19 is still under investigation. Based on these results, the question addressed in this study was how long SARS-CoV-2 survives on the surface of PM from different origin to evaluate the relationship between fuel and atmospheric pollution and virus transmission risk. The persistence and viability of SARS-CoV-2 virus was characterized in 5 engine exhaust PM and 4 samples of atmospheric PM10. The results showed that SARS-CoV-2 remains on the surface of PM10 from air pollutants but interaction with engine exhaust PM inactivates the virus. Consequently, atmospheric PM10 levels may increase SARS-CoV-2 transmission risk thus supporting a causal relationship between these factors. Furthermore, the relationship of pollution PM and particularly engine exhaust PM with virus transmission risk and COVID-19 is also affected by the impact of these pollutants on host oxidative stress and immunity. Therefore, although fuel PM inactivates SARS-CoV-2, the conclusion of the study is that both atmospheric and engine exhaust PM negatively impact human health with implications for COVID-19 and other diseases., We thank Dr. Luis Enjuanes (CNB-CSIC, Spain) for providing the SARS-CoV-2 isolate. The authors would like to thank the fuel supply by REPSOL, SASOL and AMYRIS companies. Ministry of Science and Innovation project RECOVERY (RTI2018-095923-B-C21) ANTICIPA-UCM REACT-UE-Comunidad de Madrid.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pollutant emissions from Euro 6 light duty vehicle tested under steady state and transient operation on a roller test bench with hydrogenated paraffinic and biodiesel fuels

  • Fernández-Yáñez, Pablo
  • Soriano, José A.
  • Soto, Felipe
  • Armas, Octavio
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bermúdez, Vicente|||0000-0002-2781-5598
[EN] The effort to implement more environmental-friendly fuels has been enhanced not only by the desire to reduce the greenhouse effects but also for public health issues. This paper studies the effects on pollutant emissions from a light-duty Euro 6 vehicle with four types of fuel: diesel (fossil origin, used as reference), biodiesel (renewable origin), Gas-to-Liquid (fossil origin) and farnesane (renewable origin). Both stationary engine and real-world driving cycles are studied. First, each fuel was tested in stationary modes in a vehicle test-bench and then tested in a realistic driving cycle with the same vehicle. This allows the separation the transient effects of the driving cycle from stationary results. Stationary tests lead to engine emission maps and driving cycle tests allow weighting the importance of each stationary condition during a realistic route. Instantaneous and cumulative CO, THC (total hydrocarbon), NOx and PN (particle number) emissions on route were obtained. The fuel that presented a highest level of emissions at stationary conditions was, for CO, diesel, for THC, diesel, for NOx, biodiesel and for PN, diesel. The behaviour of fuels during the driving cycles, from less pollutant to more pollutant, was: for CO, diesel, farnesane, GTL and biodiesel; for THC, GTL, farnesane, biodiesel, diesel. For NOx, farnesane and diesel (very similar values), GTL and biodiesel; for PN, GTL, biodiesel, farnesane and diesel., The authors would like to thank the funding provided by the Spanish Ministry of Science for RECUPERA project (Ref. RTI2018-095923-B-C21) and infrastructure (Ref. EQC2019-005675-P) , the donation of Farnesane fuel by AMYRIS, the donation of GTL fuel by SASOL and the discount provided by REPSOL in the purchase of diesel and biodiesel fuels.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Genotoxicity and mutagenicity of particulate matter emitted from diesel, gas to liquid, biodiesel, and farnesane fuels: A toxicological risk assessment

  • Soriano, José A.
  • García-Contreras, Reyes
  • Fuente, José de la
  • Armas, Octavio
  • Orozco-Jiménez, Luz Y.
  • Agudelo, John R.
The genotoxic and mutagenic potential of soluble organic material extracted from particulate matter emitted by a typical automotive diesel engine was evaluated from the combustion of different alternative and/or renewable fuels. One of these fuels, called Farnesane, is a novel renewable paraffinic hydrocarbon obtained from sugar cane using a biotechnology fermentation process. Tests were carried out under a steady state condition with high level of generated particulate matter, which was collected with a stainless-steel filter located 1.5 m downstream of the exhaust manifold. The mutagenicity index was evaluated using an Ames test, obtaining values for Farnesane and biodiesel fuels lower than those for fossil fuels. However, all fuels showed a mutagenicity index higher than the Phosphate Buffered Saline control. The soluble organic material was extracted from particulate matter to evaluate its genotoxicity activity using an alkaline comet assay in human lymphocytes. The obtained genotoxicity trends were similar to mutagenicity, biodiesel and Farnesane fuels showing the lowest toxicity impact. Additionally, the cell viability was studied and classified according to the type of damage. The lowest values of average Deoxyribonucleic Acid migration and cell damage associated to Farnesane, together with its larger particle size, makes this renewable fuel a potential substitute of the traditional diesel., This study was carried out under the framework of the RECUPERA (Ref.: RTI2018-095923-B-C21), project financed by the Spanish Ministry of Science, Innovation and Universities and the project ASUAV (Ref. SBPLY/19/180501/000116), financed by Junta de Comunidades de Castilla-La Mancha. Authors gratefully acknowledge the companies Repsol (Spain), Sasol (South Africa) and Amyris (Brazil) for providing the test fuels. Authors wish to thank the technical support provided by Instituto CMT – Motores Térmicos, Universidad Politécnica de Valencia (Spain). The authors are for the financial support provided by the Colombia Scientific Program within the framework of the call Ecosistema Científico (Contract No. FP44842-218-2018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Good and bad get together: Inactivation of SARS-CoV-2 in particulate matter pollution from different fuels

  • Fuente, José de la
  • Armas, Octavio
  • Barroso-Arévalo, Sandra
  • Gortázar, Christian
  • García-Seco, Teresa
  • Buendía-Andrés, Aránzazu
  • Villanueva, Florentina
  • Soriano, José A.
  • Mazuecos, Lorena
  • Vaz Rodrigues, Rita
  • García-Contreras, Reyes
  • García, Antonio
  • Monsalve-Serrano, Javier
  • Domínguez, Lucas
  • Sánchez-Vizcaíno, J. M.
Air pollution and associated particulate matter (PM) affect environmental and human health worldwide. The intense vehicle usage and the high population density in urban areas are the main causes of this public health impact. Epidemiological studies have provided evidence on the effect of air pollution on airborne SARS-CoV-2 transmission and COVID-19 disease prevalence and symptomatology. However, the causal relationship between air pollution and COVID-19 is still under investigation. Based on these results, the question addressed in this study was how long SARS-CoV-2 survives on the surface of PM from different origin to evaluate the relationship between fuel and atmospheric pollution and virus transmission risk. The persistence and viability of SARS-CoV-2 virus was characterized in 5 engine exhaust PM and 4 samples of atmospheric PM10. The results showed that SARS-CoV-2 remains on the surface of PM10 from air pollutants but interaction with engine exhaust PM inactivates the virus. Consequently, atmospheric PM10 levels may increase SARS-CoV-2 transmission risk thus supporting a causal relationship between these factors. Furthermore, the relationship of pollution PM and particularly engine exhaust PM with virus transmission risk and COVID-19 is also affected by the impact of these pollutants on host oxidative stress and immunity. Therefore, although fuel PM inactivates SARS-CoV-2, the conclusion of the study is that both atmospheric and engine exhaust PM negatively impact human health with implications for COVID-19 and other diseases., We thank Dr. Luis Enjuanes (CNB-CSIC, Spain) for providing the SARS-CoV-2 isolate. The authors would like to thank the fuel supply by REPSOL, SASOL and AMYRIS companies. Ministry of Science and Innovation project RECOVERY (RTI2018-095923-B-C21) ANTICIPA-UCM REACT-UE-Comunidad de Madrid., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effects of Module Spatial Distribution on the Energy Efficiency and Electrical Output of Automotive Thermoelectric Generators

  • Ruiz Cozar, Ivan
  • Pujol i Sagaró, Toni
  • Massaguer Colomer, Eduard
  • Massaguer Colomer, Albert
  • Montoro Moreno, Lino
  • González Castro, Josep R.
  • Comamala Laguna, Martí
  • Ezzitouni, Samir
Automotive thermoelectric generators (ATEGs) are devices used to harvest waste energy from the exhaust gases of internal combustion engines. An ATEG is essentially formed by three main elements: (1) heat absorber in contact with exhaust gases; (2) thermoelectric modules that directly convert heat into electricity; (3) heat sink to increase the heat transfer through the system. Thermoelectric modules (TEM) are commonly based on small-scale commercial units, with tenths of them needed to assemble a full ATEG device. Thus, several thermal and electrical connections between TEMs can be implemented. Previous studies focused on the implications on the output power. Here, we investigated the effects of using different module connections on the energy efficiency and on the electrical outputs (voltage and current). The study was carried out numerically with ATEGs that used from 4 to 100 individual TEMs. Series, parallel and square connections were investigated under two different engine operating points. The maximum output power was obtained with overall energy conversion efficiencies on the order of 3%. Though the series connection provided the highest output power, the square configuration was the best compromise between output power and electrical characteristics (voltage and current) to successfully integrate the ATEG into the vehicle management system, Some authors wish to thank the financial support received to the project RECOVER-TE Waste thermal energy recovery in light duty vehicles. Technological impact. Ref.: RTI2018-095923-B-C21 and the doctoral fellowship provided by the University of Castilla-La Mancha to Samir Ezzitouni Zerhouni, RECOVER-TE Waste thermal energy recovery in light duty vehicles. Technological impact. Ref.: RTI2018-095923- B-C21 and the doctoral fellowship provided by the University of Castilla-La Mancha to Samir Ezzitouni Zerhoun