Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Ensuring positiveness of the scaled difference chi-square test statistic

  • Satorra, Albert
  • Bentler, Peter M.
A scaled difference test statistic T~d that can be computed from standard software of structural equation models (SEM) by hand calculations was proposed in Satorra and Bentler (Psychometrika 66:507–514, 2001). The statistic T~d is asymptotically equivalent to the scaled difference test statistic T¯d introduced in Satorra (Innovations in Multivariate Statistical Analysis: A Festschrift for Heinz Neudecker, pp. 233–247, 2000), which requires more involved computations beyond standard output of SEM software. The test statistic T~d has been widely used in practice, but in some applications it is negative due to negativity of its associated scaling correction. Using the implicit function theorem, this note develops an improved scaling correction leading to a new scaled difference statistic T¯d that avoids negative chi-square values., Research supported by grants SEJ2006-13537 and PR2007-0221 from the Spanish Ministry of Science and Technology and by USPHS grants DA00017 and DA01070.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Moment testing for interaction terms in structural equation modeling

  • Mooijaart, Ab
  • Satorra, Albert
Starting with Kenny and Judd (Psychol. Bull. 96:201–210, 1984) several methods have been introduced for analyzing models with interaction terms. In all these methods more information from the data than just means and covariances is required. In this paper we also use more than just first- and second-order moments; however, we are aiming to adding just a selection of the third-order moments. The key issue in this paper is to develop theoretical results that will allow practitioners to evaluate the strength of different third-order moments in assessing interaction terms of the model. To select the third-order moments, we propose to be guided by the power of the goodness-of-fit test of a model with no interactions, which varies with each selection of third-order moments. A theorem is presented that relates the power of the usual goodness-of-fit test of the model with the power of a moment test for the significance of third-order moments; the latter has the advantage that it can be computed without fitting a model. The main conclusion is that the selection of third-order moments can be based on the power of a moment test, thus assessing the relevance in the analysis of different sets of third-order moments can be computationally simple. The paper gives an illustration of the method and argues for the need of refraining from adding into the analysis an excess of higher-order moments., Research of the second author is supported by grant SEJ2006-13537 from the Spanish Ministry of Science and Technology.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Smoking and cancers: case-robust analysis of a classic data set

  • Bentler, Peter M.
  • Satorra, Albert
  • Yuan, Ke-Hai
A typical structural equation model is intended to reproduce the means, variances, and correlations or covariances among a set of variables based on parameter estimates of a highly restricted model. It is not widely appreciated that the sample statistics being modeled can be quite sensitive to outliers and influential observations, leading to bias in model parameter estimates. A classic public epidemiological data set on the relation between cigarette purchases and rates of 4 types of cancer among states in the United States is studied with case-weighting methods that reduce the influence of a few cases on the overall results. The results support and extend the original conclusions; the standardized effect of smoking on a factor underlying deaths from bladder and lung cancer is .79., Research supported in part by grants DA00017 and DA01070 from the National Institute on Drug Abuse (Bentler), grant SEJ2006-13537 from the Spanish Ministry of Science and Technology (Satorra), and grant DMS04-37167 from the National Science Foundation (Yuan).
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Testing model nesting and equivalence

  • Bentler, Peter M.
  • Satorra, Albert
When using existing technology, it can be hard or impossible to determine whether two structural equation models that are being considered may be nested. There is also no routine technology for evaluating whether two very different structural models may be equivalent. A simple nesting and equivalence testing (NET) procedure is proposed that uses random sample and model-reproduced moment matrices to evaluate both model nesting and equivalence. The analysis is “local” rather than “global” in nature, but its use with simulation or bootstrapping can imply global conclusions. Two standard applications of NET are to verify whether or not two proposed models are equivalent and whether a baseline model used in an incremental fit index is appropriately nested., Research supported by grants DA00017 and DA01070 from the National Institute on Drug Abuse and grant SEJ2006-13537 from the Spanish Ministry of Science and Technology.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Principles and practice of scaled difference chi-square testing

  • Bryant, Fred B.
  • Satorra, Albert
We highlight critical conceptual and statistical issues and how to resolve them in conducting Satorra–Bentler (SB) scaled difference chi-square tests. Concerning the original (Satorra & Bentler, 2001) and new (Satorra & Bentler, 2010) scaled difference tests, a fundamental difference exists in how to compute properly a model's scaling correction factor (c), depending on the particular structural equation modeling software used. Because of how LISREL 8 defines the SB scaled chi-square, LISREL users should compute c for each model by dividing the model's normal theory weighted least-squares (NTWLS) chi-square by its SB chi-square, to recover c accurately with both tests. EQS and Mplus users, in contrast, should divide the model's maximum likelihood (ML) chi-square by its SB chi-square to recover c. Because ML estimation does not minimize the NTWLS chi-square, however, it can produce a negative difference in nested NTWLS chi-square values. Thus, we recommend the standard practice of testing the scaled difference in ML chi-square values for models M 1 and M 0 (after properly recovering c for each model), to avoid an inadmissible test numerator. We illustrate the difference in computations across software programs for the original and new scaled tests and provide LISREL, EQS, and Mplus syntax in both single- and multiple-group form for specifying the model M 10 that is involved in the new test., This research was supported in part by a grant SEJ2006-13537 from the Spanish Ministry of Science and Technology (to Albert Satorra).
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

On insensitivity of the chi-square model test to nonlinear misspecification in structural equation models

  • Mooijaart, Ab
  • Satorra, Albert
In this paper, we show that for some structural equation models (SEM), the classical chi-square goodness-of-fit test is unable to detect the presence of nonlinear terms in the model. As an example, we consider a regression model with latent variables and interactions terms. Not only the model test has zero power against that type of misspecifications, but even the theoretical (chi-square) distribution of the test is not distorted when severe interaction term misspecification is present in the postulated model. We explain this phenomenon by exploiting results on asymptotic robustness in structural equation models. The importance of this paper is to warn against the conclusion that if a proposed linear model fits the data well according to the chi-quare goodness-of-fit test, then the underlying model is linear indeed; it will be shown that the underlying model may, in fact, be severely nonlinear. In addition, the present paper shows that such insensitivity to nonlinear terms is only a particular instance of a more general problem, namely, the incapacity of the classical chi-square goodness-of-fit test to detect deviations from zero correlation among exogenous regressors (either being them observable, or latent) when the structural part of the model is just saturated., Research of the second author is supported by the grants SEJ2006-13537 and PR2007-0221 from the Spanish Ministry of Science and Technology.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

A multigroup structural equation approach: a demonstration by testing variation of firm profitability across EU samples

  • Bou, Juan Carlos
  • Satorra, Albert
We extend standard methodology for multigroup mean and covariance structure (MACS) analysis to the case where assessment of across-group variation of model parameters is the focus of the study and the data deviate from standard assumptions. The proposed methods are applied to analyze an accounting profitability database covering more than 100,000 firms in the 15 European Union (EU) countries in the period 1999 to 2003. A multivariate model with permanent and dynamic latent components of profitability is used to assess across-country variation of firm level profitability and persistence. We show that there are substantial differences among these countries, despite the partial integration of their economies. Estimation of supplementary parameters are proposed as a way to characterize persistence in each country, as well as across-group variation of model parameters. This methodology is more widely applicable in international organizational research., The authors disclosed receipt of the following financial support for the research and/or authorship of this article: Partially supported by grants SEJ2006–13537 and PR2007–0221 from the Spanish Ministry of Science and Technology and by grants GV05/125 and BEST/2008/038 from the Generalitat Valenciana (Spain).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Principles and practice of scaled difference chi-square testing

  • Bryant, Fred B.
  • Satorra, Albert
We highlight critical conceptual and statistical issues and how to resolve them in conducting Satorra–Bentler (SB) scaled difference chi-square tests. Concerning the original (Satorra & Bentler, 2001) and new (Satorra & Bentler, 2010) scaled difference tests, a fundamental difference exists in how to compute properly a model's scaling correction factor (c), depending on the particular structural equation modeling software used. Because of how LISREL 8 defines the SB scaled chi-square, LISREL users should compute c for each model by dividing the model's normal theory weighted least-squares (NTWLS) chi-square by its SB chi-square, to recover c accurately with both tests. EQS and Mplus users, in contrast, should divide the model's maximum likelihood (ML) chi-square by its SB chi-square to recover c. Because ML estimation does not minimize the NTWLS chi-square, however, it can produce a negative difference in nested NTWLS chi-square values. Thus, we recommend the standard practice of testing the scaled difference in ML chi-square values for models M 1 and M 0 (after properly recovering c for each model), to avoid an inadmissible test numerator. We illustrate the difference in computations across software programs for the original and new scaled tests and provide LISREL, EQS, and Mplus syntax in both single- and multiple-group form for specifying the model M 10 that is involved in the new test., This research was supported in part by a grant SEJ2006-13537 from the Spanish Ministry of Science and Technology (to Albert Satorra).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Testing model nesting and equivalence

  • Bentler, Peter M.
  • Satorra, Albert
When using existing technology, it can be hard or impossible to determine whether two structural equation models that are being considered may be nested. There is also no routine technology for evaluating whether two very different structural models may be equivalent. A simple nesting and equivalence testing (NET) procedure is proposed that uses random sample and model-reproduced moment matrices to evaluate both model nesting and equivalence. The analysis is “local” rather than “global” in nature, but its use with simulation or bootstrapping can imply global conclusions. Two standard applications of NET are to verify whether or not two proposed models are equivalent and whether a baseline model used in an incremental fit index is appropriately nested., Research supported by grants DA00017 and DA01070 from the National Institute on Drug Abuse and grant SEJ2006-13537 from the Spanish Ministry of Science and Technology.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Smoking and cancers: case-robust analysis of a classic data set

  • Bentler, Peter M.
  • Satorra, Albert
  • Yuan, Ke-Hai
A typical structural equation model is intended to reproduce the means, variances, and correlations or covariances among a set of variables based on parameter estimates of a highly restricted model. It is not widely appreciated that the sample statistics being modeled can be quite sensitive to outliers and influential observations, leading to bias in model parameter estimates. A classic public epidemiological data set on the relation between cigarette purchases and rates of 4 types of cancer among states in the United States is studied with case-weighting methods that reduce the influence of a few cases on the overall results. The results support and extend the original conclusions; the standardized effect of smoking on a factor underlying deaths from bladder and lung cancer is .79., Research supported in part by grants DA00017 and DA01070 from the National Institute on Drug Abuse (Bentler), grant SEJ2006-13537 from the Spanish Ministry of Science and Technology (Satorra), and grant DMS04-37167 from the National Science Foundation (Yuan).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On insensitivity of the chi-square model test to nonlinear misspecification in structural equation models

  • Mooijaart, Ab
  • Satorra, Albert
In this paper, we show that for some structural equation models (SEM), the classical chi-square goodness-of-fit test is unable to detect the presence of nonlinear terms in the model. As an example, we consider a regression model with latent variables and interactions terms. Not only the model test has zero power against that type of misspecifications, but even the theoretical (chi-square) distribution of the test is not distorted when severe interaction term misspecification is present in the postulated model. We explain this phenomenon by exploiting results on asymptotic robustness in structural equation models. The importance of this paper is to warn against the conclusion that if a proposed linear model fits the data well according to the chi-quare goodness-of-fit test, then the underlying model is linear indeed; it will be shown that the underlying model may, in fact, be severely nonlinear. In addition, the present paper shows that such insensitivity to nonlinear terms is only a particular instance of a more general problem, namely, the incapacity of the classical chi-square goodness-of-fit test to detect deviations from zero correlation among exogenous regressors (either being them observable, or latent) when the structural part of the model is just saturated., Research of the second author is supported by the grants SEJ2006-13537 and PR2007-0221 from the Spanish Ministry of Science and Technology.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Ensuring positiveness of the scaled difference chi-square test statistic

  • Satorra, Albert
  • Bentler, Peter M.
A scaled difference test statistic T~d that can be computed from standard software of structural equation models (SEM) by hand calculations was proposed in Satorra and Bentler (Psychometrika 66:507–514, 2001). The statistic T~d is asymptotically equivalent to the scaled difference test statistic T¯d introduced in Satorra (Innovations in Multivariate Statistical Analysis: A Festschrift for Heinz Neudecker, pp. 233–247, 2000), which requires more involved computations beyond standard output of SEM software. The test statistic T~d has been widely used in practice, but in some applications it is negative due to negativity of its associated scaling correction. Using the implicit function theorem, this note develops an improved scaling correction leading to a new scaled difference statistic T¯d that avoids negative chi-square values., Research supported by grants SEJ2006-13537 and PR2007-0221 from the Spanish Ministry of Science and Technology and by USPHS grants DA00017 and DA01070.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A multigroup structural equation approach: a demonstration by testing variation of firm profitability across EU samples

  • Bou, Juan Carlos
  • Satorra, Albert
We extend standard methodology for multigroup mean and covariance structure (MACS) analysis to the case where assessment of across-group variation of model parameters is the focus of the study and the data deviate from standard assumptions. The proposed methods are applied to analyze an accounting profitability database covering more than 100,000 firms in the 15 European Union (EU) countries in the period 1999 to 2003. A multivariate model with permanent and dynamic latent components of profitability is used to assess across-country variation of firm level profitability and persistence. We show that there are substantial differences among these countries, despite the partial integration of their economies. Estimation of supplementary parameters are proposed as a way to characterize persistence in each country, as well as across-group variation of model parameters. This methodology is more widely applicable in international organizational research., The authors disclosed receipt of the following financial support for the research and/or authorship of this article: Partially supported by grants SEJ2006–13537 and PR2007–0221 from the Spanish Ministry of Science and Technology and by grants GV05/125 and BEST/2008/038 from the Generalitat Valenciana (Spain).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Moment testing for interaction terms in structural equation modeling

  • Mooijaart, Ab
  • Satorra, Albert
Starting with Kenny and Judd (Psychol. Bull. 96:201–210, 1984) several methods have been introduced for analyzing models with interaction terms. In all these methods more information from the data than just means and covariances is required. In this paper we also use more than just first- and second-order moments; however, we are aiming to adding just a selection of the third-order moments. The key issue in this paper is to develop theoretical results that will allow practitioners to evaluate the strength of different third-order moments in assessing interaction terms of the model. To select the third-order moments, we propose to be guided by the power of the goodness-of-fit test of a model with no interactions, which varies with each selection of third-order moments. A theorem is presented that relates the power of the usual goodness-of-fit test of the model with the power of a moment test for the significance of third-order moments; the latter has the advantage that it can be computed without fitting a model. The main conclusion is that the selection of third-order moments can be based on the power of a moment test, thus assessing the relevance in the analysis of different sets of third-order moments can be computationally simple. The paper gives an illustration of the method and argues for the need of refraining from adding into the analysis an excess of higher-order moments., Research of the second author is supported by grant SEJ2006-13537 from the Spanish Ministry of Science and Technology.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the performance of small-area estimators : fixed vs. random area parameters

  • Costa, Àlex
  • Satorra, Albert|||0000-0001-8974-5241
  • Ventura, Eva
Most methods for small-area estimation are based on composite estimators derived from designor model-based methods. A composite estimator is a linear combination of a direct and an indirect estimator with weights that usually depend on unknown parameters which need to be estimated. Although model-based small-area estimators are usually based on random-effects models, the assumption of fixed effects is at face value more appropriate. Model-based estimators are justified by the assumption of random area effects; in practice, however, areas can not be substituted for one another in a random manner (we say, they are not interchangeable). In the present paper we empirically assess the quality of several small-area estimators in the setting in which the area effects are treated as fixed. We consider two settings: one that draws samples from a theoretical population, and another that draws samples from an empirical population of a labour force register maintained by the National Institute of Social Security (NISS) of Catalonia. We distinguish two types of composite estimators: a) those that use weights that involve area specific estimates of bias and variance; and, b) those that use weights that involve a common variance and a common squared bias estimate for all the areas. We assess their precision and discuss alternatives to optimizing composite estimation in applications.