Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Twinning during dynamic strain aging in binary Mg-3%Y alloy

  • Garcés, Gerardo
  • Máthis, Kristián
  • Toribio Pérez, Pablo
  • Medina, Judit
  • Tolnai, Domonkos
  • Gupta, Kapil
  • Stark, Andreas
  • Schell, Norbert
  • Adeva, Paloma
The extruded Mg–3 wt% Y alloy exhibits serrated flow during compression tests along the extrusion direction at intermediate temperatures (150–250 ºC) and a wide range of strain rate (10− 2 to 3 ×10− 5 s − 1 ) due to dynamic strain aging (DSA). The values of the m + β constant and the activation energy were 2 and 100 kJmol− 1 , respectively. To elucidate the underlying deformation mechanisms, in-situ synchrotron radiation diffraction and acoustic emission (AE) experiments were conducted at 200 ◦C. The deformation process involves the activation of -dislocation slip on both basal and non-basal planes, as well as extension twinning, all occurring concurrently with DSA. The characteristic serrations arise from the dynamic interaction between diffusing yttrium atoms and mobile dislocations and twin boundaries. Yttrium atoms are shown to effectively pin - dislocations and inhibit twin boundary propagation, thereby influencing the overall mechanical response during deformation. The unpinning of twin boundaries from yttrium atoms induces a new additional cluster in the acoustic emission signal., Authors would like to acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities under project number TED2021–131235B-I00. K.M. acknowledges the support of the Czech Grant Agency under project number 25–16210S. The authors also acknowledge the use of instrumentation and the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA), as well as funding from Grant IU16–014206 (METCAM), financed by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. We also acknowledge the support of the Electron Microscopy Laboratory at CENIM-CSIC and the Centro Nacional de Microscopía Electrónica (CNME, UCM) for access to their facilities and expert assistance and the Deutsches Elektronen-Synchrotron (DESY) for providing beamtime at the P07 beamline of the PETRA III synchrotron facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of twinning mechanisms of Mg–RE alloys using in situ synchrotron radiation diffraction and high-resolution digital image correlation

  • Garcés, Gerardo
  • Orozco-Caballero, A.
  • Medina, Judit
  • Pérez Zubiaur, Pablo
  • Stark, Andreas
  • Schell, Norbert
  • Adeva, Paloma
In situ synchrotron diffraction combined with high-resolution digital image correlation (HRDIC) were used to analyse the activation and spatial propagation of different twinning modes during compression deformation in an extruded Mg-6%Gd(wt%) alloy. Gadolinium atoms are in solid solution in the as-extruded state. Initially, the deformation process is controlled by the activation of tensile {101̅2}< 101̅1 > twinning (TTW). The volume fraction of TTWs evolves rapidly due to the twins transfer throughout neighbour grains and basal slip-assisted twin nucleation, as evidenced by HRDIC from the early development of localized deformation bands. TTW mode induces the rotation of the lattice with respect to the initial magnesium orientation and, therefore, a progressive increase in the intensity of the {0002} diffraction peak with increasing the strain in the axial direction, that reaches a maximum at around 6% of compression strain that also coincides with the maximum of the work-hardening curve. Above this strain, the compression (CTW) and double twinning (DTW) modes are also activated. This fact reduces the {0002} intensity along AD and increases the intensity of the {0002} diffraction peak in a direction between 15º to 45º from axial direction. The activation of non-basal dislocation-mediated slip modes within twins relaxes the localized stress concentration that DTWs generate. Therefore, gadolinium in solid solution enhances compressive plasticity in Mg alloys through the cooperative interaction between twinning and non-basal dislocation slip., This work was financially supported by the Spanish Ministry of Science, Innovation and Universities under project number TED2021–131235B-I00. The authors acknowledge the Deutsches Elektronen-Synchrotron (DESY) for providing beamtime at the P07 beamline of the PETRA III synchrotron facility. We would like to acknowledge support of the Electron Microscopy Laboratory at National Center for Metallurgical Research (CSIC) and National Center of Electron Microscopy (UCM) for access to their facilities and expert assistance. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT−4291 TEC2SPACE), MINECO (project CSIC13–4E−1794) and EU (FEDER, FSE).