Dataset.

DURCWAVE - CIEMito

UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/342397
UPCommons. Portal del coneixement obert de la UPC
  • Altomare, Corrado|||0000-0001-8817-0431
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
Measurements of the water surface elevation were taken close to the wavemaker, along the sloping foreshore and at the dike toe location by resistance type wave gauges. The overtopping flow properties thickness and velocity were measured by ultra-sonic distance sensors and high-speed cameras. Due to its large storage size, the whole set of data is provided on request., The experimental data refer to physical model tests carried out in 2019 from May to December at the wave flume CIEMito of the Maritime Engineering Laboratory (LIM) of the Universitat Politècnica de Catalunya – BarcelonaTech (UPC). The experiments aimed at characterizing the flow characteristics associated to the maximum individual overtopping volumes, due to specific storm events with different return periods. Specifically, the experiments focused on the measurements of overtopping volumes and discharges, in order to find the relation between these parameters with the corresponding overtopping flow velocities and overtopping flow depth, when the maximum overtopping event occurs on a dike during a sea state. A model geometry comprised of a sloping beach, a sloping dike and promenade was built into the CIEMito flume.
 

DOI: http://hdl.handle.net/2117/342397, https://dx.doi.org/10.5821/data-2117-342397-1
UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/342397

HANDLE: http://hdl.handle.net/2117/342397, https://dx.doi.org/10.5821/data-2117-342397-1
UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/342397
 
Ver en: http://hdl.handle.net/2117/342397, https://dx.doi.org/10.5821/data-2117-342397-1
UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/342397

UPCommons. Portal del coneixement obert de la UPC
oai:upcommons.upc.edu:2117/342397
Dataset. 2021

DURCWAVE - CIEMITO

UPCommons. Portal del coneixement obert de la UPC
  • Altomare, Corrado|||0000-0001-8817-0431
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
Measurements of the water surface elevation were taken close to the wavemaker, along the sloping foreshore and at the dike toe location by resistance type wave gauges. The overtopping flow properties thickness and velocity were measured by ultra-sonic distance sensors and high-speed cameras. Due to its large storage size, the whole set of data is provided on request., The experimental data refer to physical model tests carried out in 2019 from May to December at the wave flume CIEMito of the Maritime Engineering Laboratory (LIM) of the Universitat Politècnica de Catalunya – BarcelonaTech (UPC). The experiments aimed at characterizing the flow characteristics associated to the maximum individual overtopping volumes, due to specific storm events with different return periods. Specifically, the experiments focused on the measurements of overtopping volumes and discharges, in order to find the relation between these parameters with the corresponding overtopping flow velocities and overtopping flow depth, when the maximum overtopping event occurs on a dike during a sea state. A model geometry comprised of a sloping beach, a sloping dike and promenade was built into the CIEMito flume.





3484