Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Energy-aware Joint Orchestration of 5G and Robots: Experimental Testbed and Field Validation

  • Groshev, Milan
  • Zanzi, Lanfranco
  • Delgado, Carmen
  • Li, Xi
  • Oliva Delgado, Antonio de la
  • Costa-Pérez, Xavier
5G mobile networks introduce a new dimension for connecting and operating mobile robots in outdoor environments, leveraging cloud-native and offloading features of 5G networks to enable fully flexible and collaborative cloud robot operations. However, the limited battery life of robots remains a significant obstacle to their effective adoption in real-world exploration scenarios. This paper explores, via field experiments, the potential energy-saving gains of, a joint orchestration of 5G and Robot Operating System (ROS) that coordinates multiple 5G-connected robots both in terms of navigation and sensing, as well as optimizes their cloud-native service resource utilization while minimizing total resource and energy consumption on the robots based on real-time feedback. We designed, implemented and evaluated our proposed in an experimental testbed composed of commercial off-the-shelf robots and a local 5G infrastructure deployed on a campus. The experimental results demonstrated that significantly outperforms state-of-the-art approaches in terms of energy savings by offloading demanding computational tasks to the 5G edge infrastructure and dynamic energy management of on-board sensors (e.g., switching them off when they are not needed). This strategy achieves approximately ~15% energy savings on the robots, thereby extending battery life, which in turn allows for longer operating times and better resource utilization., The research leading to these results has been supported in part by the CERCA Programme / Generalitat de Catalunya, by the European Union’s H2020 6GGOALS Project (grant no. 101139232), by the SNS JU under the European Union’s Horizon Europe MultiX Project (grant no. 101192521) and Predict Project (grant no. 101095890), and by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-6 and TSI-063000-2021-122).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Attention to Virtualization: Making Network Digital Twins aware of Network Slicing

  • Calvillo Fernández, Alejandro
  • Dimitrovski, Toni
  • Groshev, Milan
  • Ganesh, Aditya
  • Ayimba, Constantine
  • Oliva Delgado, Antonio de la
In order to accommodate myriad disparate services, from legacy voice and data, to niche network applications for industry verticals, 6G networks are expected to heavily exploit the concept of network slicing introduced in 5G. However, the increased complexity of sliced networks amplifies the risk of configuration errors, necessitating the expanded use of Network Digital Twins (NDTs) for proactive service assurance. Legacy NDTs, are ill-suited to highly virtualized environments, as they fail to model the impact of virtualization on physical infrastructure and overlook long-term dependency effects. In this work, we highlight the performance impact of virtualization and introduce an attention-enhanced Graph Neural Networks (GNN)-based NDT to address these challenges. Our simulation results demonstrate that the proposed NDT framework significantly outperforms state-of-the-art models in accurately predicting service Key Performance Indicators (KPIs) across disparate use cases., This work was supported in part by EC through the SNS JU Hexa-X-II Project under Grant 101095759, in part by the PREDICT-6G Project under Grant 101095890, and in part by the Project UNICO 5G I+D 6G-EDGEDT.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Time-Sensitive IIoT Flows over Wi-Fi: a Network Calculus Approach

  • Barroso Fernández, Carlos
  • Martín Pérez, Jorge
  • Ayimba, Constantine
  • Oliva Delgado, Antonio de la
Real time control of connected industry devices such as mobile robots constituting Industrial Internet of Things (IIoT) has made time-sensitive communications over Wi-Fi increasingly important. In order to provide support for time-sensitive services over Wi-Fi, key features of the IEEE 802.11 standard such as restricted Target Wake Time (rTWT) and multi-user Orthogonal Frequency Division Multiple Access (OFDMA) can be exploited. However, even with rTWT and OFDMA, Time-Sensitive Networking (TSN) over Wi-Fi is still a challenge given the unpredictability of wireless channels and the increasing number of Wi-Fi-enabled devices. In this paper, we present a comprehensive network calculus-based analysis of the delay bounds achievable in Wi-Fi networks, leveraging these IEEE 802.11 enhancements alongside synchronized priority queuing via IEEE 802.1Qbv. We propose PONTE, a novel Fully Polynomial Time Approximation Scheme (FPTAS) scheduler that guarantees strict non-violation probabilities (e.g., 99.99%) for inelastic, time-critical traffic over an 802.11 wireless network. Our extensive analysis and simulations in an IIoT scenario demonstrate that PONTE effectively manages dense, mixed traffic flows, achieving TSN objectives with minimal impact on fairness. Our approach is two orders of magnitude faster than the state-of-the-art., This work was supported in part by the Jose Castillejo Mobility Grant of the Spanish Ministry of Science, Innovation and Universities under Grant CAS23/00455; in part by Ministerio de Ciencia, Innovacion y Universidades (MCIN) ´ /Agencia Estatal de Investigacion´ (AEI)/10.13039/501100011033/ through the Project 6GINSPIRE under Grant PID2022-137329OB-C42; in part by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union-NextGenerationEU through the Universalizacion de Infraestructuras Digitales para la Cohesion´ (UNICO) 6G I+D 6G-DATADRIVEN; and in part by the European Commission Horizon Europe Smart Networks and Services Joint Undertaking (SNS JU) PREDICT-6G (GA 101095890) Project.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

KPI-aware service provisioning for remote industrial control systems management

  • Pagès Cruz, Albert|||0000-0002-6661-3630
  • Guasch Mesià, Enric
  • Agraz Bujan, Fernando|||0000-0001-8958-0088
  • Spadaro, Salvatore|||0000-0002-4100-1726
The advent of B5G/6G communication infrastructures answers to the requirements posed by emerging use cases and business models, such as Industry 4.0 and autonomous guided vehicles, which impose a set of highly demanding Key Performance Indicators (KPIs). In this regard, time-engineered applications are of particular importance. Said applications, while do not may impose very demanding latencies, they impose a strict control over them to ensure a deterministic service performance. This has given rise to the concept of Deterministic Networking that relies on adding deterministic capabilities to all involved network infrastructures. In general, optical networks are seen as one of the main enablers of latency and jitter-bounded communications, due to their intrinsic deterministic nature. In the framework of Industry 4.0 use cases, such capability can be exploited to enable remote control of optically interconnected smart factories, contributing this way to reduce both CAPEX and OPEX. However, the estimation of KPIs across optically interconnected smart factories/client domains and the provisioning of end-to-end (E2E) services arises several challenges. In this work, we present firstly multiple service provisioning schemas (single-vs multi-path) leveraging the capabilities of the Software Defined Networking (SDN) paradigm. Then, we provide tools and algorithms for best-case KPI estimation and resource allocation decision and analyze the impact of supporting heterogeneous KPIs into the obtained overall network performance., This publication is supported by the project TRAINER-B (PID2020- 118011 GB-C22) funded by MCIN/AEI/10.13039/501100011033 and the by the European Commission through Grant No. 101095890 (Predict-6G project)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Provisioning of time-sensitive and non-time-sensitive flows with assured performance

  • Velasco Esteban, Luis Domingo|||0000-0002-7345-296X
  • Graziadei, Gianluca
  • Barzegar, Sima|||0000-0003-1916-7217
  • Ruiz Ramírez, Marc|||0000-0001-6429-6347
Time-Sensitive Networking (TSN) standards provide scheduling and traffic shaping mechanisms to ensure the coexistence of Time-Sensitive (TS) and non-TS traffic classes on the same network infrastructure. Nonetheless, much effort is still needed on the operation of such TSN capable network infrastructure to ensure that the required performance of the different flows, defined in terms of key performance indicators, can be met once the flows are deployed in the network. In this paper, we focus on such aspects and propose a solution involving network-wide scheduling for TS flows, as well as performance estimation for non-TS flows. Specifically, a control plane architecture especially designed for provisioning TS and non-TS flows is proposed. The architecture integrates: i) a TS Flow Scheduler Planner for defining the scheduling of requested TS flows along a path so as to meet their required performance; and ii) a Network Digital Twin to estimate the performance of requested and already established non-TS flows. Differently from standardized time-aware schedulers, per-TS flow queues are assumed so as to guarantee minimal jitter. Efficient algorithms are proposed so the provisioning of flows can be carried out with high accuracy and short time. Simulation results for heterogeneous scenarios demonstrate the feasibility and efficiency of the proposed control plane architecture, as well as point out the limitations of current time-synchronization mechanisms when high-speed interfaces are considered., The research leading to these results has received funding from the European Commission thought the NextGeneration UNICO5G TIMING (TSI063000-2021-145) and the HORIZON EUROPE Smart Networks and Services Joint Undertaking PREDICT-6G (G.A. 101095890) projects and from the ICREA Institution., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Provisioning of time-sensitive and non-time-sensitive flows with assured performance

  • Velasco Esteban, Luis Domingo
  • Graziadei, Gianluca
  • Barzegar, Sima
  • Ruiz Ramírez, Marc
Time-Sensitive Networking (TSN) standards provide scheduling and traffic shaping mechanisms to ensure the coexistence of Time-Sensitive (TS) and non-TS traffic classes on the same network infrastructure. Nonetheless, much effort is still needed on the operation of such TSN capable network infrastructure to ensure that the required performance of the different flows, defined in terms of key performance indicators, can be met once the flows are deployed in the network. In this paper, we focus on such aspects and propose a solution involving network-wide scheduling for TS flows, as well as performance estimation for non-TS flows. Specifically, a control plane architecture especially designed for provisioning TS and non-TS flows is proposed. The architecture integrates: i) a TS Flow Scheduler Planner for defining the scheduling of requested TS flows along a path so as to meet their required performance; and ii) a Network Digital Twin to estimate the performance of requested and already established non-TS flows. Differently from standardized time-aware schedulers, per-TS flow queues are assumed so as to guarantee minimal jitter. Efficient algorithms are proposed so the provisioning of flows can be carried out with high accuracy and short time. Simulation results for heterogeneous scenarios demonstrate the feasibility and efficiency of the proposed control plane architecture, as well as point out the limitations of current time-synchronization mechanisms when high-speed interfaces are considered., The research leading to these results has received funding from the European Commission thought the NextGeneration UNICO5G TIMING (TSI063000-2021-145) and the HORIZON EUROPE Smart Networks and Services Joint Undertaking PREDICT-6G (G.A. 101095890) projects and from the ICREA Institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

KPI-aware service provisioning for remote industrial control systems management

  • Pagès Cruz, Albert
  • Guasch Mesià, Enric
  • Agraz Bujan, Fernando
  • Spadaro, Salvatore
The advent of B5G/6G communication infrastructures answers to the requirements posed by emerging use cases and business models, such as Industry 4.0 and autonomous guided vehicles, which impose a set of highly demanding Key Performance Indicators (KPIs). In this regard, time-engineered applications are of particular importance. Said applications, while do not may impose very demanding latencies, they impose a strict control over them to ensure a deterministic service performance. This has given rise to the concept of Deterministic Networking that relies on adding deterministic capabilities to all involved network infrastructures. In general, optical networks are seen as one of the main enablers of latency and jitter-bounded communications, due to their intrinsic deterministic nature. In the framework of Industry 4.0 use cases, such capability can be exploited to enable remote control of optically interconnected smart factories, contributing this way to reduce both CAPEX and OPEX. However, the estimation of KPIs across optically interconnected smart factories/client domains and the provisioning of end-to-end (E2E) services arises several challenges. In this work, we present firstly multiple service provisioning schemas (single-vs multi-path) leveraging the capabilities of the Software Defined Networking (SDN) paradigm. Then, we provide tools and algorithms for best-case KPI estimation and resource allocation decision and analyze the impact of supporting heterogeneous KPIs into the obtained overall network performance., This publication is supported by the project TRAINER-B (PID2020- 118011 GB-C22) funded by MCIN/AEI/10.13039/501100011033 and the by the European Commission through Grant No. 101095890 (Predict-6G project)., Peer Reviewed, Postprint (author's final draft)
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Time-sensitive IIoT flows over wi-fi: a network calculus approach

  • Barroso Fernández, Carlos
  • Martín Pérez, Jorge|||0000-0001-9295-1601
  • Ayimba, Constantine
  • Oliva, Antonio de la