Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Operational predictive optimal control of Barcelona water transport network

  • Pascual, Josep
  • Romera, Juli
  • Puig, Vicenç
  • Cembrano, Gabriela
  • Creus, Ramon
  • Minoves, Meritxell
Trabajo presentado al 18th IFAC World Congress celebrado en Milan del 28 de agosto al 2 de septiembre de 2011., This paper describes the application of model-based predictive control (MPC) techniques to the supervisory flow management in large-scale drinking water networks including a telemetry/telecontrol system. MPC is used to generate flow control strategies (set-points for the regulatory controllers) from the sources to the consumer areas to meet future demands, optimizing performance indexes associated to operational goals such as economic cost, safety storage volumes in the network and smoothness of the flow control actions. The designed management strategies are applied to a model of a real case study: the drinking water transport network of Barcelona (Spain). © 2013 Elsevier Ltd., This work has been partially funded by the Spanish Ministry of Science and Innovation under project grant WATMAN DPI2009-13744, by the SOSTAQUA project CENIT-2007-1039 and by the WIDE European project FP7-ICT-224168., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical and decentralised model predictive control of drinking water networks: Application to Barcelona case study

  • Ocampo-Martínez, Carlos
  • Barcelli, Davide
  • Puig, Vicenç
  • Bemporad, Alberto
A hierarchical and decentralised model predictive control (DMPC) strategy for drinking water networks (DWN) is proposed. The DWN is partitioned into a set of subnetworks using a partitioning algorithm that makes use of the topology of the network, historic information about the actuator usage and heuristics. A suboptimal DMPC strategy was derived, which consists in a set of MPC controllers, whose prediction model is a plant partition, where each element solves its control problem in a hierarchical order. A comparative simulation study between centralised MPC (CMPC) and DMPC approaches is developed using a case study, which consists in an aggregate version of the Barcelona DWN. Results have shown the effectiveness of the proposed DMPC approach in terms of the scalability of computations with an acceptable admissible loss of performance in all the considered scenarios. © 2011 The Institution of Engineering and Technology., This work has been supported by the WATMAN Project (Ref. DPI20 09-13744) of the Spanish Science and Technology Ministry, the DGR of Generalitat de Catalunya (SAC group Ref. 2009/SGR/1491) and the European Commission under project “WIDE - Decentralized and Wireless Control of Large-Scale Systems”, contract number FP7-IS T-224168., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Partitioning approach oriented to the decentralised predictive control of large-scale systems

  • Ocampo-Martínez, Carlos
  • Bovo, Samuele
  • Puig, Vicenç
In this paper, a partitioning approach for large-scale systems based on graph-theory is presented. The algorithm starts with the translation of the system model into a graph representation. Once the system graph is obtained, the problem of graph partitioning is then solved. The resultant partition consists in a set of non-overlapping subgraphs whose number of vertices is as similar as possible and the number of interconnecting edges between them is minimal. To achieve this goal, the proposed algorithm applies a set of procedures based on identifying the highly connected subgraphs with balanced number of internal and external connections. In order to illustrate the use and application of the proposed partitioning approach, it is used to decompose a dynamical model of the Barcelona drinking water network (DWN). Moreover, a hierarchical-like DMPC strategy is designed and applied over the resultant set of partitions in order to assess the closed-loop performance. Results obtained when used several simulation scenarios show the effectiveness of both the partitioning approach and the DMPC strategy in terms of the reduced computational burden and, at the same time, of the admissible loss of performance in contrast to a centralised MPC strategy. © 2010 Elsevier Ltd., This work has been supported by Spanish research project WATMAN (CICYT DPI2009-13744) of the Science and Technology Ministry, the Juan de la Cierva Research Programme (ref. JCI-2008-2438), the DGR of Generalitat de Catalunya (SAC group Ref. 2009/SGR/1491) and the EU project WIDE (FP7-IST-224168)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PLIO: a generic tool for real-time operational predictive optimal control of water networks

  • Cembrano, Gabriela
  • Quevedo, Joseba
  • Puig, Vicenç
  • Pérez, Ramon
  • Figueras, Jordi
  • Verdejo, J. M.
  • Escaler, I.
  • Ramón, Gustavo
  • Barnet, Gemma
  • Rodríguez, P.
  • Casas, Marc
This paper presents a generic tool, named PLIO, that allows to implement the real-time operational control of water networks. Control strategies are generated using predictive optimal control techniques. This tool allows the flow management in a large water supply and distribution system including reservoirs, open-flow channels for water transport, water treatment plants, pressurized water pipe networks, tanks, flow/pressure control elements and a telemetry/telecontrol system. Predictive optimal control is used to generate flow control strategies from the sources to the consumer areas to meet future demands with appropriate pressure levels, optimizing operational goals such as network safety volumes and flow control stability. PLIO allows to build the network model graphically and then to automatically generate the model equations used by the predictive optimal controller. Additionally, PLIO can work off-line (in simulation) and on-line (in real-time mode). The case study of Santiago-Chile is presented to exemplify the control results obtained using PLIO off-line (in simulation). © IWA Publishing 2011., Research in this group is partially supported by by the Generalitat de Catalunya Research Committee, under grant ref. 2009/SGR/1491, by the Spanish Ministry of Science and Technology under grant WATMAN (CICYT DPI2009-13744) and the EU project WIDE (FP7-IST-224168)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Partitioning approach oriented to the decentralised predictive control of large-scale systems

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

PLIO: a generic tool for real-time operational predictive optimal control of water networks

  • Casas, M.
  • Rodríguez, P.
  • Barnet, P.
  • Cembrano Gennari, Gabriela|||0000-0003-1436-6022
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Pérez Magrané, Ramon|||0000-0002-9216-4234
  • Figueras Jové, Jaume|||0000-0003-3280-7004
  • Verdejo, M.
  • Escaler, I.
  • Ramón, G.
This paper presents a generic tool, named PLIO, that allows to implement the real-time operational control of water networks. Control strategies are generated using predictive optimal control techniques. This tool allows the flow management in a large water supply and distribution system including reservoirs, open-flow channels for water transport, water treatment plants, pressurized water pipe networks, tanks, flow/pressure control elements and a telemetry/telecontrol system. Predictive optimal control is used to generate flow control strategies from the sources to the consumer areas to meet future demands with appropriate pressure levels, optimizing operational goals such as network safety volumes and flow control stability. PLIO allows to build the network model graphically and then to automatically generate the model equations used by the predictive optimal controller. Additionally, PLIO can work off-line (in simulation) and on-line (in real-time mode). The case study of Santiago-Chile is presented to exemplify the control results obtained using PLIO off-line (in simulation), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Operational predictive optimal control of Barcelona water transport network

  • Pascual Pañach, Josep
  • Romera Formiguera, Juli
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Cembrano Gennari, Gabriela|||0000-0003-1436-6022
  • Creus Rodriguez, Ramon
  • Minoves Ruiz, Meritxell
This paper describes the application of model-based predictive control (MPC) techniques to the supervisory flow management in large-scale drinking water networks including a telemetry/telecontrol system. MPC is used to generate flow control strategies (set-points for the regulatory controllers) from the sources to the consumer areas to meet future demands, optimizing performance indexes associated to operational goals such as economic cost, safety storage volumes in the network and smoothness of the flow control actions. The designed management strategies are applied to a model of a real case study: the drinking water transport network of Barcelona (Spain), Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Operational predictive optimal control of Barcelona water transport network

  • Pascual Pañach, Josep
  • Romera Formiguera, Juli
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
  • Creus Rodriguez, Ramon
  • Minoves Ruiz, Meritxell
This paper describes the application of model-based predictive control (MPC) techniques to the supervisory flow management in large-scale drinking water networks including a telemetry/telecontrol system. MPC is used to generate flow control strategies (set-points for the regulatory controllers) from the sources to the consumer areas to meet future demands, optimizing performance indexes associated to operational goals such as economic cost, safety storage volumes in the network and smoothness of the flow control actions. The designed management strategies are applied to a model of a real case study: the drinking water transport network of Barcelona (Spain), Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

PLIO: a generic tool for real-time operational predictive optimal control of water networks

  • Casas, M.
  • Rodríguez, P.
  • Barnet, P.
  • Cembrano Gennari, Gabriela
  • Quevedo Casín, Joseba Jokin
  • Puig Cayuela, Vicenç
  • Pérez Magrané, Ramon
  • Figueras Jové, Jaume
  • Verdejo, M.
  • Escaler, I.
  • Ramón, G.
This paper presents a generic tool, named PLIO, that allows to implement the real-time operational control of water networks. Control strategies are generated using predictive optimal control techniques. This tool allows the flow management in a large water supply and distribution system including reservoirs, open-flow channels for water transport, water treatment plants, pressurized water pipe networks, tanks, flow/pressure control elements and a telemetry/telecontrol system. Predictive optimal control is used to generate flow control strategies from the sources to the consumer areas to meet future demands with appropriate pressure levels, optimizing operational goals such as network safety volumes and flow control stability. PLIO allows to build the network model graphically and then to automatically generate the model equations used by the predictive optimal controller. Additionally, PLIO can work off-line (in simulation) and on-line (in real-time mode). The case study of Santiago-Chile is presented to exemplify the control results obtained using PLIO off-line (in simulation), Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Partitioning approach oriented to the decentralised predictive control of large-scale systems